Works matching IS 13886150 AND DT 2025 AND VI 150 AND IP 5

Results: 54

Correction: Thermal and hydrodynamic properties of coronavirus at various temperature and pressure via molecular dynamics approach.

Published in:

2025

By:

Malekahmadi, Omid;
Zarei, Akbar;
Esfahani, Mohammad Behzad Botlani;
Hekmatifar, Maboud;
Sabetvand, Roozbeh;
Marjani, Azam;
Bach, Quang-Vu

Publication type:

Correction Notice

Characterization and thermophysical property evaluation of ceramic and metal oxide-based hybrid nanoparticles enhanced paraffin PCM.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3319, doi. 10.1007/s10973-025-14110-1

By:

Praveenkumar, N.;
Lingadurai, K.;
Ramkumar, T.;
Bharathiraja, R.

Publication type:

Article

The influence of the braking disc construction on the heating of friction pair (disc–pads).

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3475, doi. 10.1007/s10973-025-14059-1

By:

Stojanovic, Nadica;
Stojic, Boris;
Petrovic, Milena;
Abdullah, Oday I.;
Grujic, Ivan

Publication type:

Article

A comprehensive overview of refrigerants from the past to the modern day: energy, exergy, and environmental perspectives.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3201, doi. 10.1007/s10973-025-14050-w

By:

Yıldırım, Ragıp;
Akyüz, Ali;
Kumaş, Kazım;
Tuncer, Azim Doğuş;
Gungor, Afsin

Publication type:

Article

The effect of heat treatment on crystal structure and thermodynamic properties of Cu–Al–Ni shape memory alloy.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3297, doi. 10.1007/s10973-025-14037-7

By:

Mohammed, Safar Saeed;
Karim, Ayoub Sabir;
Qadir, Rezhaw Abdalla;
Kök, Mediha;
Dağdelen, Fethi;
Wsw, Avin Faisal;
Othman, Abdulla Maghdid

Publication type:

Article

High-fidelity simulation of emission characteristics in dual-fuel HCCI engines with premixed n-dodecane and ethanol as secondary fuel.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3805, doi. 10.1007/s10973-025-14030-0

By:

Navanth, A.;
Sharma, T. Karthikeya

Publication type:

Article

Enhanced heat transfer using nanofluids: a fractional Prabhakar derivative approach for Brinkman-type fluids.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3767, doi. 10.1007/s10973-025-14023-z

By:

Qadir, Muhammad Irfan;
Majeed, Usman;
ul Islam, Faheem;
Raza, Ali;
Khan, Sami Ullah;
Nazarova, Nodira;
Gupta, Manish;
Khan, M. Ijaz

Publication type:

Article

Opportunities to improve the lubrication, fuel efficiency, and emission reduction using nanotechnologies: a review.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3173, doi. 10.1007/s10973-025-14018-w

By:

Kant, Kamla;
Singh, R. C.;
Maji, S.

Publication type:

Article

Functionalized carbon nanotubes: synthesis, properties, and application in polymer for flame retardancy—a review.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3067, doi. 10.1007/s10973-025-14016-y

By:

Taib, Mohamad Nurul Azman Mohammad;
Khairuddin, Nur Farahah Mohd;
Saleh, Tawfik A.

Publication type:

Article

Hydrothermal performance analysis of hybrid nanofluid flow in minichannel heat sink equipped with secondary inclined channels and pins.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3873, doi. 10.1007/s10973-025-14013-1

By:

Dawood, H. K.;
Alfellag, Mohanad A.;
Abed, Waleed M.;
Hameed, Marwan

Publication type:

Article

Advanced thermal management using radiative viscoelastic hybrid nanofluid (Go-Ag/kerosene oil) due to oscillatory stretching surface.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3835, doi. 10.1007/s10973-025-14012-2

By:

Alahmadi, Yaser H.

Publication type:

Article

A comprehensive review of the influence of various parameters on convection in different enclosures and heat sinks.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3091, doi. 10.1007/s10973-025-14008-y

By:

Abdulsahib, Ahmed Dhafer;
Alkhafaji, Dhirgham;
Albayati, Ibrahim M.

Publication type:

Article

Microstructure and characterization of tobermorite synthesized by microwave hydrothermal technique.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3253, doi. 10.1007/s10973-025-14004-2

By:

Yang, Lei;
Liu, Zhuo;
Jiang, Zhuangzhuang;
Luo, Shuqiong;
Liu, Xiaoxing;
Wang, Penggang;
Unluer, Cise;
Chang, Jindan

Publication type:

Article

Experimental performance evaluation of an auto-tracking parabolic trough solar collector with recirculation of nanofluids.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3529, doi. 10.1007/s10973-025-14001-5

By:

Farhan, Muhammad;
Hassan, Faisal;
Zubair, Muhammad;
Jamil, Furqan;
Shahid, Ihsan;
Khiadani, Mehdi;
Ali, Hafiz Muhammad

Publication type:

Article

Effects of adding phosphorus-containing ionic liquids on the flammability and thermal stability of paraffin.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3449, doi. 10.1007/s10973-025-14000-6

By:

Lin, Yu-Cheng;
Lin, Wei-Cheng;
Guo, Gan-Syue;
Yu, Yi-Chun;
Shu, Chi-Min

Publication type:

Article

Investigation of convective heat transfer in helically corrugated tubes with inserts using nanofluids.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3403, doi. 10.1007/s10973-025-13999-y

By:

Anbu, S.;
Arunkumar, P.;
Kamatchi, R.;
Chellappan, M.

Publication type:

Article

Trapezoidal fin featured heat exchanger performance enriched by using alumina/GNP hybrid nanofluid: thermal characteristics study.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3907, doi. 10.1007/s10973-025-13997-0

By:

Venkatesh, R.;
Upadhyay, Viyat Varun;
Bhooshanam, N. Naga;
Mohanavel, Vinayagam;
Karthik, K.;
Ayyar, Manikandan;
Ravichandran, Manickam;
Soudagar, Manzoore Elahi M.;
Seikh, A. H.

Publication type:

Article

Experimental investigation of the thermal and hydrodynamic performances of plate-fin heat exchangers (PFHE) using MgO–water nanofluid as an enhanced coolant.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3821, doi. 10.1007/s10973-025-13994-3

By:

Aktas, Fatih;
Elibol, Emre Askin;
Aksoy, Aleyna Eda;
Cicek, Diren Deniz;
Oztemel, Muhammed Ali;
Cetin, Didem;
Turgut, Oguz

Publication type:

Article

Evaluation of the thermo-hydraulic behavior of water-based graphene and Al2O3 hybrid nanofluids in a circular tube through CFD simulations.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3789, doi. 10.1007/s10973-025-13993-4

By:

Oflaz, Fatma

Publication type:

Article

Size-dependent thermal behavior of silver nanofluids in heat pipes: a comparative study of nanoparticle sizes.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3735, doi. 10.1007/s10973-025-13992-5

By:

Elumalai, Sivakumar;
Kadamban, Manikandan;
Dhairiyasamy, Ratchagaraja

Publication type:

Article

Thermal analysis of thermally treated spruce wood after its accelerated aging.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3283, doi. 10.1007/s10973-025-13989-0

By:

Kačíková, Danica;
Eštoková, Adriana;
Gaff, Milan;
Kmeťová, Elena;
Kúdela, Jozef;
Kačík, František

Publication type:

Article

Preparation of multi-hydroxy chitosan derivative and its synergistic effect on fire performance and mechanical properties of epoxy resin.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3335, doi. 10.1007/s10973-024-13982-z

By:

Yan, Jing;
Jiang, Haiqing;
Gao, Na;
Zhang, Xiangnan;
Liu, Xingyu;
Huo, Siqi;
Lu, Jing;
Wang, Junjie

Publication type:

Article

Liquid immersion cooling with enhanced Al2O3 nanofluid for large-format prismatic battery pack: numerical and statistical investigation.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3489, doi. 10.1007/s10973-024-13979-8

By:

Yousefi, Elnaz;
Talele, Virendra;
Morali, Uğur;
Mishra, Dhananjay;
Ramasamy, Devarajan;
Kadirgama, Kumaran;
Najafi, Hasan;
Kanthale, Sarthak;
Panchal, Satyam

Publication type:

Article

Investigation of heat transfer and pressure loss of bio-based functionalized multi-walled carbon nanotubes nanofluid in separation flow passage.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3921, doi. 10.1007/s10973-024-13976-x

By:

Abdullah, Mohamad Jamal;
Hamid, Mahar Diana;
Newaz, Kazi Salim

Publication type:

Article

Alumina-silicon dioxide hybrid nanofluid action on functional characteristics of photovoltaic thermal collector featured with spiral coil.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3859, doi. 10.1007/s10973-024-13973-0

By:

Venkatesh, R.;
Singh, Ravindra Pratap;
Bhooshanam, N. Naga;
Mohanavel, Vinayagam;
Karthik, K.;
Ayyar, Manikandan;
Ravichandran, Manickam;
Soudagar, Manzoore Elahi M.;
Seikh, A. H.

Publication type:

Article

Integration and heat performance evaluation of NaNO3–KNO3 PCM and hybrid nanofluid configured solar thermal heat exchanger.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3893, doi. 10.1007/s10973-024-13970-3

By:

Soudagar, Manzoore Elahi M.;
Sharma, Aman;
Bhooshanam, N. Naga;
Mohanavel, Vinayagam;
Venkatesh, R.;
Ravichandran, M.;
Ayyar, Manikandan;
Al Obaid, Sami;
Alharbi, Sulaiman Ali

Publication type:

Article

Optimization of parameters on fig leaf powders added polylactic acid-based composite films using Taguchi method.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3351, doi. 10.1007/s10973-024-13967-y

By:

Tuna, Sibel

Publication type:

Article

Novel approach by combining model-free and model-fitting technique for kinetic and thermodynamic analysis of bamboo, bagasse, and rice husk using thermogravimetric analyser.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3369, doi. 10.1007/s10973-024-13966-z

By:

Chaudhuri, Pratik;
Pande, Rohan;
Baraiya, Nikhil A.

Publication type:

Article

Influence of heat source on radiative-convective heat and mass transfer flow of water-based copper nanofluid from a permeable stretchable cylinder in porous medium with chemical reaction and convective boundary conditions.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3701, doi. 10.1007/s10973-024-13965-0

By:

Singh, Khilap;
Chauhan, Preeti

Publication type:

Article

Comparative analysis of salt gradient solar pond energy storage and PCM-coupled TiO2 nanoparticles for enhanced solar energy utilization.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3549, doi. 10.1007/s10973-024-13964-1

By:

Poyyamozhi, N.;
Logesh, K.;
Karthikeyan, L.;
Vengadesan, E.;
Arulprakasajothi, M.

Publication type:

Article

Experimental study on the effectiveness of new core–shell structure extinguishant to extinguish oil pool fire and analysis of fire extinguishing mechanism.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3267, doi. 10.1007/s10973-024-13956-1

By:

Zhang, Yu-jia;
Xing, Zhi-xiang;
Chai, Guo-qiang;
Lin, Song;
Wu, Jie;
Liu, Ye-cheng;
Peng, Ming;
Jiang, Jun-cheng

Publication type:

Article

Experimental study on thermal evolution from precursor gel to crystallized MgO for biomedical applications.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3225, doi. 10.1007/s10973-024-13951-6

By:

Hattab, Marwa;
Oprea, Ovidiu Cristian;
Cernea, Marin

Publication type:

Article

Experimental evaluation of heat transfer augmentation and exergy analysis in flat plate solar collector employing mono and hybrid nanofluids.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3683, doi. 10.1007/s10973-024-13950-7

By:

Saravanan, G.;
Murugapoopathi, S.

Publication type:

Article

Impact of virtual baffles and magnetic nanofluid on thermo-hydraulic characteristics of sine wave mini channel.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3845, doi. 10.1007/s10973-024-13935-6

By:

Souayeh, Basma

Publication type:

Article

Biochar from lignocellulosic waste as a sustainable alternative to anthracite carbon in water treatment.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3237, doi. 10.1007/s10973-024-13934-7

By:

da Silva, Francisco Raimundo;
de Mello, Bruna Sampaio;
Rodrigues, Brenda Clara Gomes;
Ribeiro, Clóvis Augusto;
Sarti, Arnaldo

Publication type:

Article

Correction to: Performance evaluation of shot‑blasted heat exchangers with MWCNT and activated carbon nanofluids: assessing entropy, exergy, sustainability index, Grashof, Rayleigh, and Richardson numbers for solar thermal applications.

Published in:

2025

By:

GaneshKumar, Poongavanam;
VinothKumar, S.;
Sundaram, P.;
Sathishkumar, A.;
Kim, Seong Cheol;
Ramkumar, Vanaraj;
Pandiaraj, Saravanan;
Alodhayb, Abdullah N.;
Alzahrani, Khalid E.

Publication type:

Correction Notice

Natural convection in a 3D trapezoidal cavity with nanofluid and internal cylinders.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3777, doi. 10.1007/s10973-024-13931-w

By:

Al-Sharify, Zainab T.;
Hussein, Ahmed Kadhim;
Alsabery, Ammar I.;
Alrazen, Hayder A.;
Hashim, Ishak;
Abbas, Sara Mohammed

Publication type:

Article

Enhancing heat transfer in a double-tube heat exchanger using perforated twisted tape and nanofluid.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3719, doi. 10.1007/s10973-024-13930-x

By:

Marzouk, S. A.;
Aljabr, Ahmad;
Almehmadi, Fahad Awjah;
Sharaf, Maisa A.

Publication type:

Article

Performance analysis of a parabolic solar trough collector with multiple revolving tubes for ternary nanofluid and different base fluids.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3421, doi. 10.1007/s10973-024-13929-4

By:

Chakraborty, Oveepsa;
Nath, Sourav

Publication type:

Article

Thermally stratified electrically conducting flow interacting MWCNT/SWCNT hybrid nanofluid over an inclined riga plate with variable viscosity and thermal slip: application in nanotechnology.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3751, doi. 10.1007/s10973-024-13926-7

By:

Mehmood, Rashid;
Noreena;
Rana, Siddra;
Akbar, Noreen Sher;
Zidan, Ahmed M.

Publication type:

Article

Characteristics of elastic deformation on Boger hybrid nanofluid using modified Hamilton–Crosser model: a local thermal nonequilibrium model.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3305, doi. 10.1007/s10973-024-13919-6

By:

Okasha, Mostafa Mohamed;
Abbas, Munawar;
Norberdiyeva, Muyassar;
Bayz, Dyana Aziz;
Mahariq, Ibrahim;
Abbas, Ansar;
Akgül, Ali;
Galal, Ahmed M.

Publication type:

Article

Review: Microcapsules for enhancing the safety of LIBs.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3037, doi. 10.1007/s10973-024-13911-0

By:

Qi, Long-Tai;
Xing, Zhi-Xiang;
Wu, Jie;
Lu, Wan-Zheng;
Li, Ming-Feng;
Shi, Ya-Qin;
Liu, Yan-Yan;
Wang, Ao-Qi;
Guo, Ai-Wen;
Zhang, Hai-Wen;
Jiang, Jun-Cheng

Publication type:

Article

Overview of thermal and analytical characterization techniques for biofuels and its blends.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3007, doi. 10.1007/s10973-024-13907-w

By:

Muhammed Raji, Abdulwasiu;
Manescau, Brady;
Chetehouna, Khaled;
Ogabi, Raphael

Publication type:

Article

Exploring MHD radiative Maxwell nanofluid flow on an expanding surface for the impact of activation energy associated with velocity slip and convective boundary conditions.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3661, doi. 10.1007/s10973-024-13905-y

By:

Thumma, Thirupathi;
Mishra, S. R.;
Pattnaik, P. K.;
Reddy, Ch. Achi

Publication type:

Article

The effect of the important variables for the design novel milli-channel cooling system on the evaporator performance by the Taguchi method.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3637, doi. 10.1007/s10973-024-13894-y

By:

Koca, Aliihsan;
Mustafaoglu, Mansur;
Karakoyun, Yakup;
Dalkilic, Ahmet Selim

Publication type:

Article

Computational analysis of MHD flow in a porous open chamber filled with hybrid nanofluid and vertical heat sources.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3621, doi. 10.1007/s10973-024-13892-0

By:

Gokulavani, P.;
Muthukumar, S.;
Sureshkumar, S.;
Muthtamilselvan, M.;
Al-Mdallal, Qasem M.

Publication type:

Article

Advances in the investigation of thermal characteristics of hydrostatic bearing spindle: an overview.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3139, doi. 10.1007/s10973-024-13889-9

By:

Yu, Xiaodong;
Shao, Mingjuan;
Yang, Xinyi;
Lin, Yanlong;
Lan, Zhiyuan;
Li, Lu;
Li, Enzhao;
Dai, Ruichun;
Jia, Wentao;
Wang, Junfeng;
Jiao, Jianhua;
Jiang, Hui

Publication type:

Article

Maximizing efficiency: exploring the crucial role of ducts in air-cooled lithium-ion battery thermal management.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3121, doi. 10.1007/s10973-024-13883-1

By:

Gogoi, Bonashree;
Deka, Hiranya;
Sharma, Prabhakar;
Barik, Debabrata;
Medhi, Bhaskar Jyoti;
Bora, Bhaskor Jyoti;
Paramasivam, Prabhu;
Ağbulut, Ümit

Publication type:

Article

Thermal analysis of Reiner–Philippoff fluid flow with nanoparticles and bioconvection over a radially magnetized curved stretching surface.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3509, doi. 10.1007/s10973-024-13880-4

By:

Farooq, Umar;
Liu, Tao;
Alshamrani, Ali;
Farooq, Umer;
Jan, Ahmed

Publication type:

Article

Effect of magnetic field on the thermal and hydraulic behavior of biological hybrid nanofluid flow in curved microchannels.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 5, p. 3559, doi. 10.1007/s10973-024-13852-8

By:

Gharehkhani, M.;
Dinarvand, S.;
Hajmohammadi, M. R.

Publication type:

Article