Works matching IS 10735623 AND DT 2025 AND VI 56 AND IP 6

Results: 25

Surface Engineering of Ti13Zr13Nb Biomaterial Alloy with Gold Via Laser Melting for Enhanced Biocompatibility and Functional Performance.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2235, doi. 10.1007/s11661-025-07763-y

By:

Bialas, Oktawian;
Kunwar, Anil;
Taratuta, Anna;
Skonieczna, Magdalena;
Matus, Krzysztof;
Adamiak, Marcin

Publication type:

Article

Influence of the As-quenched State and Tempering Heating Rate on Microstructural Characteristics of a High-Strength Steel.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2189, doi. 10.1007/s11661-025-07778-5

By:

Tolouei, Ehsan;
Hurel, Valentin;
Loucif, Abdelhalim;
Morin, Jean-Benoit;
Jahazi, Mohammad

Publication type:

Article

Kinking-Mediated Anomalous Strain Rate Sensitivity During Compression Deformation in a Fe–Cr–Al Alloy.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2180, doi. 10.1007/s11661-025-07777-6

By:

Luo, Wei;
Li, jiabin;
Wang, xiaoshuai;
Zuo, Ding;
Cheng, Jingze;
Zhang, Ruiqian;
Liu, Huiqun

Publication type:

Article

Effect of Service Exposure on Creep Crack Growth Nature of P91 Steel.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 1964, doi. 10.1007/s11661-025-07776-7

By:

Singh, Chandra Veer;
Bagui, Sumanta;
Siefert, John;
Tarafder, Soumitra

Publication type:

Article

Influence of Convective-Thermal Coupling Mechanism on Dendrite Morphological Evolution of Al–7 Wt Pct Si Alloy Under Traveling-Wave Magnetic Field Casting.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2166, doi. 10.1007/s11661-025-07762-z

By:

Liu, Si-Yao;
Miao, Xin-Cheng;
Zhou, Ye;
Zhao, Ji-Yu;
Ai, Xin-Gang;
Li, Sheng-Li

Publication type:

Article

Competitive Growth Kinetics Between Primary Dendrites and Pseudobinary Eutectics Within Liquid CoCrFeNiSn Quinary Alloy.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2102, doi. 10.1007/s11661-025-07761-0

By:

Yan, Pengxu;
Chang, Jian;
Wang, Weili;
Zhao, Xiaolei;
Hou, Niansi;
Wei, Bingbo

Publication type:

Article

A Review of Medium-Mn, Low-Density Steels for Transportation Applications.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 1913, doi. 10.1007/s11661-025-07775-8

By:

Scuseria, Tomás;
Garza, Kelcey;
Pierce, Dean T.;
Clarke, Amy J.;
Clarke, Kester D.

Publication type:

Article

Enhanced Corrosion and Tribological Properties of GO-Reinforced Cu Matrix Nanocomposites Fabricated by ARB Process.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2074, doi. 10.1007/s11661-025-07760-1

By:

Golmohammadi, M.;
Salehi, M.;
Koohdar, H. R.

Publication type:

Article

Thermodynamic Investigations of the KF–CsI, NaI–KI, and MgCl2–SrCl2 Pseudo-binary Systems.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2268, doi. 10.1007/s11661-025-07774-9

By:

Scuro, N. L.;
Collins, M. C.;
Beneš, O.;
Sklenka, J.;
Piro, M. H. A.

Publication type:

Article

Revealing the Synergistic Effects of Grain Refinement and Low Temperature on the Deformation Mechanisms of Cr–Mn–N Austenitic Stainless Steel.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2252, doi. 10.1007/s11661-025-07773-w

By:

Wang, Zhi;
Hu, Chengyang;
Dong, Hangyu;
Wan, Xiangliang;
Deng, Xiangtao;
Ke, Rui;
Li, Guangqiang;
Wu, Kaiming

Publication type:

Article

An Insight into the Key Structural, Mechanical, and Operational Properties of Newly Designed Fe-Gr-Br MMCs After Thermo-Mechanical Processing.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2215, doi. 10.1007/s11661-025-07772-x

By:

Dyachkova, Larisa;
Feldshtein, Eugene;
Leksycki, Kamil;
Krolczyk, Grzegorz;
Zverko, Alexandra

Publication type:

Article

Simulation of Cementite Coarsening and Ferrite Grain Growth During Annealing in a Cold-Rolled Plain Medium Carbon Steel.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2277, doi. 10.1007/s11661-025-07769-6

By:

Enomoto, Masato;
Hayashi, Koutarou

Publication type:

Article

Considerable Improvement in the Oxidation Resistance of a Y/Sc Co-doped AlCoCrFeNi High-Entropy Alloy Without Loss of Mechanical Properties at 1100 °C.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2151, doi. 10.1007/s11661-025-07768-7

By:

Chen, R. R.;
Ren, H.;
Chen, D. Z.;
Gao, X. F.;
Liu, T.;
Yang, X.;
Feng, L.;
Chen, Y.;
Qin, G.;
Wu, S. P.;
Guo, J. J.;
Fu, H. Z.

Publication type:

Article

Phase Evolution and Mechanical Behavior of a Novel Ti–6.3Cu–2.2Fe−2.1Al Alloy Processed by Wire-Arc Directed Energy Deposition.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 1957, doi. 10.1007/s11661-025-07766-9

By:

Klein, Martin;
Staufer, Ella;
Zhang, Duyao;
Edtmaier, Christian;
Horky, Jelena;
Schmitz-Niederau, Martin;
Qiu, Dong;
Easton, Mark;
Klein, Thomas

Publication type:

Article

Thermal Conductivity of Sheet Metal Composites Electrophoretic Deposition-Coated with Carbon-Captured Supra-Graphene Quantum Dot (GQD) Assemblies.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2090, doi. 10.1007/s11661-025-07765-w

By:

Prasittisopin, Lapyote;
Boonlertsamut, Thanabodee;
Jantaping, Narin;
Boonyongmaneerat, Yuttanant;
Panpranot, Joongjai

Publication type:

Article

Optimizing Electroless Ni–P Coating on the Inner Wall of 304 Stainless Steel Pipes: Control of Plating Solution Flow Rate for Enhanced Microstructural Uniformity and Corrosion Resistance.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2129, doi. 10.1007/s11661-025-07764-x

By:

Shi, Yongpeng;
Sun, Lan;
Wang, Jun;
Zhang, Hongtao;
Huang, Chenhao

Publication type:

Article

On the Enhanced Creep Performance in Ti6246 Achieved Through Laser Powder Bed Fusion (LPBF) Processing.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2057, doi. 10.1007/s11661-025-07759-8

By:

Cobbinah, Prince Valentine;
Matsunaga, Sae;
Toda, Yoshiaki;
Ozasa, Ryosuke;
Ishimoto, Takuya;
Nakano, Takayoshi;
Ito, Tsutomu;
Yamabe-Mitarai, Yoko

Publication type:

Article

Effects of Sn and Ag on the Early Stage of Natural Aging Process for Al–Mg–Si Alloys.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2116, doi. 10.1007/s11661-025-07758-9

By:

Matsumoto, Katsushi;
Sugita, Kazuki;
Ozaki, Masanori;
Shishido, Hisao;
Aruga, Yasuhiro;
Mizuno, Masataka;
Araki, Hideki;
Shirai, Yasuharu

Publication type:

Article

Molecular Dynamics Simulation of the Atomic Mechanisms of Deformation and Phase Transformation in Titanium Alloys.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 1971, doi. 10.1007/s11661-025-07757-w

By:

Xu, Dongsheng;
Meng, Zhichao;
Guo, Hui;
Bao, Qili;
Wang, Mengli;
Wang, Hao;
Li, Xuexiong;
Zhang, Jinhu;
Zhao, Zibo;
Wang, Qingjiang;
Sachdev, Anil K.;
Yang, Rui

Publication type:

Article

The Effect of Pretreated Titanium Surface Topography on the Properties of Electrophoretically Deposited Chitosan Coatings from Ethanol-Based Suspensions.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2021, doi. 10.1007/s11661-025-07756-x

By:

Pawłowski, Łukasz;
Mirowska, Aleksandra;
Gajowiec, Grzegorz;
Dzionk, Stefan

Publication type:

Article

Microstructure, Erosion Performance, and Wear Resistance of Laser-Claded NiCrBSi-WC Composite Coatings.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2005, doi. 10.1007/s11661-025-07755-y

By:

Khodabakhshi, A.;
Eslami, A.;
Ashrafizadeh, F.;
Mendez, P.

Publication type:

Article

The Influence of Overall Texture on the Grain Boundary Network in an AZ31 Alloy.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 1994, doi. 10.1007/s11661-025-07754-z

By:

Beladi, Hossein;
Ghaderi, Alireza;
Tari, Vahid;
Rollett, Anthony D.;
Rohrer, Gregory S.

Publication type:

Article

AlCoCrFeNiTi0.2 High-Entropy Alloy Under Plasma Nitriding: Complex Microstructure Transformation, Mechanical and Tribological Enhancement.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2040, doi. 10.1007/s11661-025-07752-1

By:

Włoczewski, Mateusz;
Jasiewicz, Kinga;
Jenczyk, Piotr;
Gadalińska, Elżbieta;
Kulikowski, Krzysztof;
Zhang, Yong;
Li, Rui Xuan;
Jarząbek, Dariusz M.

Publication type:

Article

Emergence of Ferromagnetic State Due to Structural Disorder in Pseudo-binary Ce(Fe0.9Co0.1)2 Compound.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 1983, doi. 10.1007/s11661-025-07751-2

By:

Musiał, A.;
Pugaczowa-Michalska, M.;
Lindner, N.;
Śniadecki, Z.

Publication type:

Article

Constitutional Supercooling-induced Freckle Nucleation Mechanism of Nickel-based Superalloy During Directional Solidification.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2202, doi. 10.1007/s11661-025-07750-3

By:

Jia, Yuliang;
Zhang, Yongjia;
Wang, Shuai;
Cheng, Feng;
Shi, Changkun;
Shi, Zekai;
Du, Yingliu;
Zhang, Yongchao;
Hu, Kehui;
Duan, Fangmiao;
Ge, Binghui;
Shen, Xu;
Shu, Guogang;
Lü, Zhigang

Publication type:

Article

Works matching IS 10735623 AND DT 2025 AND VI 56 AND IP 6

Surface Engineering of Ti13Zr13Nb Biomaterial Alloy with Gold Via Laser Melting for Enhanced Biocompatibility and Functional Performance.

Influence of the As-quenched State and Tempering Heating Rate on Microstructural Characteristics of a High-Strength Steel.

Kinking-Mediated Anomalous Strain Rate Sensitivity During Compression Deformation in a Fe–Cr–Al Alloy.

Effect of Service Exposure on Creep Crack Growth Nature of P91 Steel.

Influence of Convective-Thermal Coupling Mechanism on Dendrite Morphological Evolution of Al–7 Wt Pct Si Alloy Under Traveling-Wave Magnetic Field Casting.

Competitive Growth Kinetics Between Primary Dendrites and Pseudobinary Eutectics Within Liquid CoCrFeNiSn Quinary Alloy.

A Review of Medium-Mn, Low-Density Steels for Transportation Applications.

Enhanced Corrosion and Tribological Properties of GO-Reinforced Cu Matrix Nanocomposites Fabricated by ARB Process.

Thermodynamic Investigations of the KF–CsI, NaI–KI, and MgCl<sub>2</sub>–SrCl<sub>2</sub> Pseudo-binary Systems.

Revealing the Synergistic Effects of Grain Refinement and Low Temperature on the Deformation Mechanisms of Cr–Mn–N Austenitic Stainless Steel.

An Insight into the Key Structural, Mechanical, and Operational Properties of Newly Designed Fe-Gr-Br MMCs After Thermo-Mechanical Processing.

Simulation of Cementite Coarsening and Ferrite Grain Growth During Annealing in a Cold-Rolled Plain Medium Carbon Steel.

Considerable Improvement in the Oxidation Resistance of a Y/Sc Co-doped AlCoCrFeNi High-Entropy Alloy Without Loss of Mechanical Properties at 1100 °C.

Phase Evolution and Mechanical Behavior of a Novel Ti–6.3Cu–2.2Fe−2.1Al Alloy Processed by Wire-Arc Directed Energy Deposition.

Thermal Conductivity of Sheet Metal Composites Electrophoretic Deposition-Coated with Carbon-Captured Supra-Graphene Quantum Dot (GQD) Assemblies.

Optimizing Electroless Ni–P Coating on the Inner Wall of 304 Stainless Steel Pipes: Control of Plating Solution Flow Rate for Enhanced Microstructural Uniformity and Corrosion Resistance.

On the Enhanced Creep Performance in Ti6246 Achieved Through Laser Powder Bed Fusion (LPBF) Processing.

Effects of Sn and Ag on the Early Stage of Natural Aging Process for Al–Mg–Si Alloys.

Molecular Dynamics Simulation of the Atomic Mechanisms of Deformation and Phase Transformation in Titanium Alloys.

The Effect of Pretreated Titanium Surface Topography on the Properties of Electrophoretically Deposited Chitosan Coatings from Ethanol-Based Suspensions.

Microstructure, Erosion Performance, and Wear Resistance of Laser-Claded NiCrBSi-WC Composite Coatings.

The Influence of Overall Texture on the Grain Boundary Network in an AZ31 Alloy.

AlCoCrFeNiTi<sub>0.2</sub> High-Entropy Alloy Under Plasma Nitriding: Complex Microstructure Transformation, Mechanical and Tribological Enhancement.

Emergence of Ferromagnetic State Due to Structural Disorder in Pseudo-binary Ce(Fe<sub>0.9</sub>Co<sub>0.1</sub>)<sub>2</sub> Compound.

Constitutional Supercooling-induced Freckle Nucleation Mechanism of Nickel-based Superalloy During Directional Solidification.