Works in Metallurgical & Materials Transactions. Part A, 2025, Vol 56, Issue 9

Results: 55

B2 Precipitation in Al0.2CoCrFeNi with Enhanced Microstructural Stability and Mechanical Properties.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3405, doi. 10.1007/s11661-025-07912-3

By:

Radha, Ambe;
Peddiraju, Vivek C.;
Korla, Rajesh;
Chatterjee, Subhradeep

Publication type:

Article

Low Cycle Fatigue Behaviour of High Carbon Carbide-Free Nanostructured Bainitic Steels.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4092, doi. 10.1007/s11661-025-07910-5

By:

Gupta, Sandeep Kumar;
Manna, R.;
Chattopadhyay, Kausik

Publication type:

Article

Effect of Temperature Profile Curvature on the Formation of Atypical Inhomogeneity of Dendritic Microstructure Across the Width of a Single Crystal Blade.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4230, doi. 10.1007/s11661-025-07909-y

By:

Szeliga, Dariusz;
Buk, Jarosław;
Motyka, Maciej

Publication type:

Article

Investigation of Aluminum Electrospark Alloyed Coatings on Steels.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4204, doi. 10.1007/s11661-025-07908-z

By:

Haponova, Oksana;
Tarelnyk, Viacheslav;
Tarelnyk, Nataliia;
Laponog, Gennadii

Publication type:

Article

Kinetics of Phase Separation in Super Duplex Stainless Steel 2507 Revealed by In Situ Neutron Scattering for Various Intermediate Heat Treatments.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4082, doi. 10.1007/s11661-025-07906-1

By:

Rolinska, Monika;
Spartacus, Gabriel;
Dahlström, Alexander;
Mu, Wangzhong;
Youngs, Tristan G. A.;
Odqvist, Joakim;
Hedström, Peter

Publication type:

Article

Numerical Simulation and Experimental Analysis of Laser Welding of GH4099 Ni-Based Superalloy Thin Plate.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4189, doi. 10.1007/s11661-025-07904-3

By:

Yang, Shu;
Mao, Huiping;
Lu, Aiqi;
Zhou, Li

Publication type:

Article

Elastoplastic Phase-Field Study of Local Stress and Plastic Deformation Due to Carbide Precipitation in High- and Low-Carbon Quenching–Tempering Steels.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3440, doi. 10.1007/s11661-025-07903-4

By:

Yang, Yuchen;
Zheng, Hongqing;
Zuo, Xunwei;
Wan, Jianfeng;
Rong, Yonghua;
Chen, Nailu

Publication type:

Article

Effect of Laser Remelting on the Thermal Stability of Microstructure/Properties of Ti–6Al–4V Alloy Fabricated by Laser Powder Bed Fusion.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4032, doi. 10.1007/s11661-025-07902-5

By:

Deng, Yangyang;
Yang, Yang;
Zhan, Yuxing;
Liu, Yueyang

Publication type:

Article

Laser Welding Effects on Microstructure and Mechanical Properties in AISI 304 Stainless Steel.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4068, doi. 10.1007/s11661-025-07901-6

By:

Tilton, T.;
Delenin, L.;
Getto, E.;
Swenson, Matthew J.

Publication type:

Article

A Novel Electromagnetic Stirring Assisted Lost Foam Compound Casting Process for Improvement in Interface Microstructure and Mechanical Properties of Al/Mg Bimetals.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3802, doi. 10.1007/s11661-025-07885-3

By:

Yu, Linghui;
Li, Qingqing;
Xu, Yuancai;
Yu, Xiaopeng;
Peng, Ziwei;
Jiang, Wenming

Publication type:

Article

Investigation of Tempering-Induced Brittle Fracture Mechanism in a Novel Low-Density Martensitic Steel.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3972, doi. 10.1007/s11661-025-07899-x

By:

Fu, Chuanxing;
Sun, Ce;
Zhou, Jie;
Guo, Fanghui;
Li, Junru

Publication type:

Article

Regularities of Orthorhombic α″ Phase Formation in Binary Zirconium Alloys.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3961, doi. 10.1007/s11661-025-07897-z

By:

Dobromyslov, A. V.;
Taluts, N. I.

Publication type:

Article

Y2O3-Doped BioGlass Coatings for Ti-6Al-4V Alloy: Insights into Degradation, Bioactivity, Ion Release, Adhesion, and Corrosion Behavior.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4172, doi. 10.1007/s11661-025-07896-0

By:

Say, Yakup;
Aslan, Naim;
Cihangir, Salih;
Murat, Oğuzkağan;
Çaydaş, Ulaş

Publication type:

Article

Globular Austenite Enhanced Ductility in Lean 3Mn Steel by Multi-step Annealing and Flashing.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3431, doi. 10.1007/s11661-025-07895-1

By:

Yu, Jieru;
Hu, Bin;
Yu, Yishuang;
Xiong, Zhihui;
Liu, Shilong;
Misra, R. D. K.;
Jin, Xuejun

Publication type:

Article

Rapid Dendritic Growth Kinetics and Microstructure Modulation Approach of Anticorrosive Ti–Fe–Nb Alloy During Containerless Processing.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3985, doi. 10.1007/s11661-025-07900-7

By:

Zheng, Yuhang;
Sun, Chonghao;
Ruan, Ying;
Wei, Bingbo

Publication type:

Article

Modeling Hydrogen Transport and Trapping in Vacancy Clusters: Application to the ITER-Like Monoblocks.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4050, doi. 10.1007/s11661-025-07892-4

By:

Chroeun, S.;
Ben Ayed, S.;
Bian, S.;
Wauters, T.;
Bonnin, X.;
Gaspérini, M.;
Mougenot, J.;
Charles, Y.

Publication type:

Article

Alloying Element Variation-Induced Microstructural Responses in Electro-Gas Welded Metals Subjected to CaF2–SiO2 Flux-Cored Wires.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3424, doi. 10.1007/s11661-025-07890-6

By:

Wan, Yibo;
Zhong, Ming;
Xie, Xu;
Zou, Xiaodong;
Kaldre, Imants;
Wang, Cong

Publication type:

Article

Micro-Mechanisms of Damage Evolution in Commercially Pure Titanium: An In-Situ Study with CPFEM Simulations.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4157, doi. 10.1007/s11661-025-07889-z

By:

Sahu, Vivek K.;
Yadava, Manasij;
Chakraborty, Pritam;
Gurao, Nilesh P.

Publication type:

Article

Liquid Thermophysical Properties and Crystalline–Amorphous Hybrid Microstructures of Quaternary Zr–Ni–Al–Nb Alloy Explored Under Electrostatic Levitation Condition.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3821, doi. 10.1007/s11661-025-07887-1

By:

Jin, Yingjie;
Geng, Delu;
Zhong, Qichao;
Hu, Liang;
Wei, Bingbo

Publication type:

Article

A Phenomenon of Low-Temperature Precipitation Hardening in Heat-Affected Zone of Austenitic Stainless Steel Welds.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4108, doi. 10.1007/s11661-025-07894-2

By:

Yu, Lina;
Nishimoto, Kazutoshi;
Hirata, Hiroyuki;
Saida, Kazuyoshi

Publication type:

Article

Characterization of Recrystallized Grains During Static Recrystallization of Hot-Compressed Mg–Zn–Ca Alloys Using In Situ Far-Field High-Energy Diffraction Microscopy.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3788, doi. 10.1007/s11661-025-07884-4

By:

Roumina, Reza;
Lee, Sangwon;
Berman, Tracy D.;
Shanks, Katherine S.;
Allison, John E.;
Bucsek, Ashley

Publication type:

Article

Impact of Partial Recrystallization on the Fatigue Performance of Aluminum EN AW6082 Forged Components in Neutral and Corrosive Environments.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3923, doi. 10.1007/s11661-025-07883-5

By:

Cecchel, Silvia;
Lamberti, Alessandra;
Battini, Davide;
Avanzini, Andrea;
Cornacchia, Giovanna

Publication type:

Article

Enhanced Mechanical and Corrosion-Resistant Properties of Medium-Entropy Alloys via Micro-oxygen Solid Solution Strengthening.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4142, doi. 10.1007/s11661-025-07882-6

By:

Jiang, Yan;
Yang, Qian;
Gao, Jiahui;
Zhang, Xingyu

Publication type:

Article

A Derivation of Crystal Plasticity-Based Heat Conduction Equation and Thermo-coupled Finite Element Simulation on Strain-Induced Martensitic Transformation at Different Strain Rates in Polycrystal SUS304.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4126, doi. 10.1007/s11661-025-07881-7

By:

Huang, Yihui;
Sun, Qian;
Gao, Chong;
Cao, Bo;
Iwamoto, Takeshi

Publication type:

Article

Phase Equilibria and Solidification Microstructure of La–Co–Cu Alloys: Experimental Study and Thermodynamic Calculation.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 4011, doi. 10.1007/s11661-025-07880-8

By:

Liu, X. Y.;
Wang, J.;
Liu, X.;
Yao, Q. R.;
Rao, G. H.;
Zhou, H. Y.

Publication type:

Article

Hot Compression of Additively Manufactured Martensitic Stainless Steels.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3900, doi. 10.1007/s11661-025-07879-1

By:

Shahriari, Ayda;
Keshavarzi, Shokat;
Forooghi, Foroozan;
Keshavarzan, Mohsen;
Hadadzadeh, Amir;
Sanjari, Mehdi;
Pirgazi, Hadi;
Kestens, Leo A. I.;
Shalchi Amirkhiz, Babak;
Ofori-Opoku, Nana;
Wells, M. A.;
Mohammadi, Mohsen

Publication type:

Article

Effect of Mn on Solubility Product of Nonstoichiometric Vanadium Carbides in Austenite: Thermodynamic Calculation and Experimental Verification.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3854, doi. 10.1007/s11661-025-07878-2

By:

Zhu, Zongwei;
Yang, Dapeng;
Miao, Zhitong;
Wang, Tao;
Yi, Hongliang

Publication type:

Article

Formation Mechanism of O Phase in Continuous Cooling of Ti2AlNb Alloys.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3702, doi. 10.1007/s11661-025-07877-3

By:

Bu, Zhiqiang;
Yang, Lin;
Kang, Jianmei;
Li, Jinfu

Publication type:

Article

Effective Electrical and Thermal Conductivities of Porous Sintered Metallic Compacts.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3449, doi. 10.1007/s11661-025-07876-4

By:

Montes, Juan Manuel;
Ternero, Fátima

Publication type:

Article

Influence of Pre-straining on Phase Transformation Kinetics in a Cast Homogenized Superni 625 During Thermal Exposure.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3730, doi. 10.1007/s11661-025-07875-5

By:

Chahar, Sonika;
Mula, Suhrit

Publication type:

Article

A Novel Model for the Relationship Between Microstructures and Strength in Lath Martensite Steels.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3648, doi. 10.1007/s11661-025-07873-7

By:

Sun, Chen;
Cao, Yan-Fei;
Liu, Hang-Hang;
Yan, Zi-Wen;
Song, Kai-Yan;
Liu, Hong-Wei;
Fu, Pai-Xian

Publication type:

Article

Constitutive Modeling and Microstructural Evolution of Ti-3.3Al-2.8Mo-1.2V Alloy Under Hot Compression.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3881, doi. 10.1007/s11661-025-07872-8

By:

Tang, Kai;
Lu, Bobo;
Yang, Gang;
Yang, Yi;
Wu, Mingxia;
Fan, Junming;
Zhou, Qixiong;
Luo, Xiong

Publication type:

Article

Axial Shortening Distance of Ti60/TC18 Heterogeneous Alloys by Inertia Friction Welding: Combine FEM Model, Microstructure and Properties.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3837, doi. 10.1007/s11661-025-07871-9

By:

Zhang, Junyi;
Liu, Yingying;
Zhai, Jiangbo;
Zhou, Nian;
Liu, Shifeng;
Tan, Qianhui;
Wang, Wen;
Wang, Kuaishe

Publication type:

Article

Rationalizing Different Microstructures and Yield Strengths of Cross-Platform Laser Powder Bed Fusion 316L.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3944, doi. 10.1007/s11661-025-07870-w

By:

Schreiber, Matthew;
Ramirez, Jorge A;
Hommer, Garrison;
Jin, Ye;
Smith, Charles;
Klemm-Toole, Jonah;
Brice, Craig;
Gockel, Joy

Publication type:

Article

Effect of Ni Addition on the Hot Tearing Susceptibility of Al–Zn–Mg–Cu Alloys.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3771, doi. 10.1007/s11661-025-07869-3

By:

Lin, Yixiong;
Wang, Liandeng;
Geng, Bin;
Jiang, Zhiwei

Publication type:

Article

The Influence of Cold-Forming Residual Stresses on Crashworthiness Efficiency of Thin-Walled Structures.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3586, doi. 10.1007/s11661-025-07868-4

By:

Rogala, Michał;
Kochmańska, Agnieszka

Publication type:

Article

Heat Treatment of Additively Manufactured Nickel-Based Superalloy Haynes 282.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3681, doi. 10.1007/s11661-025-07867-5

By:

Wanni, Janith;
Nelaturu, Phalgun;
Islam, Zahabul;
Agrawal, Ankur;
Grotjan, Anthony M.;
Anderson, Mark H.;
Thoma, Dan J.

Publication type:

Article

Effect of Cooling Rate on the Heterogeneity of Grain Boundary η-Phase Precipitates in 7xxx Aluminium Alloys Following Artificial Ageing.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3997, doi. 10.1007/s11661-025-07866-6

By:

Yao, Yichao;
Euesden, Ryan;
Curd, Matthew;
Burnett, Timothy;
Shanthraj, Pratheek;
Prangnell, Philip B.

Publication type:

Article

Exploring Impact of Die Structure on Peripheral Coarse Grain Formation and Mechanical Properties of 2195 Al–Cu–Li Alloy Extrusion Plates.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3621, doi. 10.1007/s11661-025-07865-7

By:

Wang, Yongxiao;
Zhao, Guoqun;
Xu, Xiao;
Chen, Xiaoxue

Publication type:

Article

Design and Development of a Lightweight Steel Through Computational Thermodynamics Approach and Experiments.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3748, doi. 10.1007/s11661-025-07864-8

By:

Swamy, Shetti;
Gandi, Appala Naidu;
Hasan, Sk Md

Publication type:

Article

Correction: Investigation of Dynamic Recrystallisation of Steel During Hot Compression Using Gleeble and Laser-Ultrasonics (GLUS).

Published in:

2025

By:

Malmström, Mikael;
Bäcke, Linda;
Magnusson, Hans;
Lönnqvist, Johan;
Hutchinson, Bevis

Publication type:

Correction Notice

Exploring Trace Mg Microalloying Impact on Corrosion Mechanism of X70 Steel.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3518, doi. 10.1007/s11661-025-07862-w

By:

Chen, Tianqi;
Wang, Zhiyi;
Li, Qinglin;
Liu, Chao;
Zhang, Shasha;
Huang, Feng;
Liu, Zhiyong;
Cheng, Xuequn;
Li, Xiaogang

Publication type:

Article

The Dynamic Compressive Response of the Metastable β TWIP Alloy, Ti–15Mo (Wt Pct), at Elevated Temperatures.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3604, doi. 10.1007/s11661-025-07860-y

By:

Pittman, Emily;
Clarke, Amy;
Lamberson, Leslie

Publication type:

Article

Effects of Heat Treatment on Vintage Pipeline Electric Resistance Welds.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3670, doi. 10.1007/s11661-025-07859-5

By:

Slone, C. E.;
Kaplowitz, D. A.;
Bowers, M. L.;
Roepke, C.;
Mazánová, V.;
James, B. A.;
Aguiar, D. J.

Publication type:

Article

A Novel Austenitic Stainless Steel Made from 17-4PH Stainless Steel Powder Using Gas Nitriding and SPS Processing Technique.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3573, doi. 10.1007/s11661-025-07858-6

By:

Cui, Guodong;
Wang, Wenbo;
Wang, Yanhuan;
Shi, Mingqi;
Zhang, Chengsong;
Bai, Jingsheng

Publication type:

Article

Decoupling Dislocation-Based Plasticity and Transformation-Induced Plasticity Effects on Fatigue Crack Growth in a Martensitic-Austenitic Steel.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3866, doi. 10.1007/s11661-025-07857-7

By:

Kumar, Gaurav;
Bhandakkar, Tanmay K.;
Ghosh, Sumit;
Pallaspuro, Sakari;
Somani, Mahesh C.;
Kömi, Jukka;
Mishra, Sushil K.;
Gokhale, Amol A.

Publication type:

Article

Effect of Processing and Anisotropy on the Morphology and Performance of the Pr2/3Cu3Ti4O12 (PCTO) Dielectric Material.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3657, doi. 10.1007/s11661-025-07856-8

By:

Singh, N. B.;
Su, Ching Hua;
Cullum, Brian M.;
Choa, Fow-Sen;
Arnold, Bradley R.;
Mandal, K. D.

Publication type:

Article

Recovery of Creep Performance at Different Temperature and Stress Levels of a Directionally Solidified Ni-Based Superalloy by Hot Isostatic Pressing and Rejuvenation Heat Treatments.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3553, doi. 10.1007/s11661-025-07855-9

By:

Sun, Zishu;
Jiang, Xiangwei;
Dong, Jiasheng;
Zhan, Xin;
Wang, Li;
Wang, Di;
Xu, Zhengguo;
Li, Kaiwen;
Wang, Mingsheng;
Lou, Langhong

Publication type:

Article

Realizing Enormous Grain Refinement Together with Vanadium Carbides Dispersion After Carburization of Ferritic Fe–4-Wt Pct V Alloy.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3536, doi. 10.1007/s11661-025-07854-w

By:

Kashyap, Anupama;
Bathula, Vishwanadh;
Singh, Vishal;
Meka, Sai Ramudu

Publication type:

Article

The application of citronella oil and citronellol as antibacterial ingredients in chitosan coatings for titanium surfaces.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 9, p. 3495, doi. 10.1007/s11661-025-07853-x

By:

Mielczarek, Mikołaj;
Marchewka, Jakub;
Sitarz, Maciej;
Cieniek, Łukasz;
Brzychczy-Włoch, Monika;
Gosiewski, Tomasz;
Biegun-Drożdż, Katarzyna;
Drożdż, Kamil;
Moskalewicz, Tomasz

Publication type:

Article