Works matching IS 10599630 AND DT 2018 AND VI 27 AND IP 3

Results: 26

On the Interplay Between Adhesion Strength and Tensile Properties of Thermal Spray Coated Laminates—Part II: Low-Velocity Thermal Spray Coatings.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 308, doi. 10.1007/s11666-018-0690-6

By:

Luo, Xiaotao;
Smith, Gregory M.;
Sampath, Sanjay

Publication type:

Article

Microstructural Characteristics and Performances of Cr2O3 and Cr2O3<bold>-</bold>15%TiO2 S-HVOF Coatings Obtained from Water-Based Suspensions.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 344, doi. 10.1007/s11666-018-0687-1

By:

Toma, Filofteia-Laura;
Potthoff, Annegret;
Barbosa, Maria

Publication type:

Article

Imaging Slit Pores Under Delaminated Splats by White Light Interference.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 319, doi. 10.1007/s11666-018-0686-2

By:

Chen, Lin;
Gao, Li-li;
Yang, Guan-Jun

Publication type:

Article

On the Interplay Between Adhesion Strength and Tensile Properties of Thermal Spray Coated Laminates—Part I: High Velocity Thermal Spray Coatings.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 296, doi. 10.1007/s11666-018-0695-1

By:

Luo, Xiaotao;
Smith, Gregory M.;
Sampath, Sanjay

Publication type:

Article

Kuroda Retires as Associate Editor; Hussain and Shinoda Join Editorial Team.

Published in:: Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 243, doi. 10.1007/s11666-018-0699-x
Publication type:: Article

Structure and Corrosion Behavior of Arc-Sprayed Zn-Al Coatings on Ductile Iron Substrate.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 524, doi. 10.1007/s11666-018-0694-2

By:

Bonabi, Salar Fatoureh;
Ashrafizadeh, Fakhreddin;
Sanati, Alireza;
Nahvi, Saied Mehran

Publication type:

Article

Nanostructured Photocatalytic TiO2 Coating Deposited by Suspension Plasma Spraying with Different Injection Positions.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 245, doi. 10.1007/s11666-018-0693-3

By:

Liu, Xuezhang;
Wen, Kui;
Deng, Chunming;
Yang, Kun;
Deng, Changguang;
Liu, Min;
Zhou, Kesong

Publication type:

Article

Epitaxial Growth and Cracking Mechanisms of Thermally Sprayed Ceramic Splats.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 255, doi. 10.1007/s11666-018-0692-4

By:

Chen, Lin;
Yang, Guan-jun

Publication type:

Article

Phase and Microstructure Evolution and Toughening Mechanism of a Hierarchical Architectured Al2O3–Y2O3 Coating under High Temperature.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 358, doi. 10.1007/s11666-018-0691-5

By:

Rong, Jian;
Yang, Kai;
Zhuang, Yin;
Ni, Jinxing;
Zhao, Huayu;
Tao, Shunyan;
Zhong, Xinghua;
Ding, Chuanxian

Publication type:

Article

Novel Online Diagnostic Analysis for In-Flight Particle Properties in Cold Spraying.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 423, doi. 10.1007/s11666-018-0685-3

By:

Koivuluoto, Heli;
Matikainen, Ville;
Larjo, Jussi;
Vuoristo, Petri

Publication type:

Article

The Influence of the Coating Deposition Process on the Interdiffusion Behavior Between Nickel-Based Superalloys and MCrAlY Bond Coats.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 379, doi. 10.1007/s11666-018-0689-z

By:

Elsaß, M.;
Frommherz, M.;
Oechsner, M.

Publication type:

Article

Essential Factors Influencing the Bonding Strength of Cold-Sprayed Aluminum Coatings on Ceramic Substrates.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 446, doi. 10.1007/s11666-018-0688-0

By:

Drehmann, R.;
Grund, T.;
Lampke, T.;
Wielage, B.;
Wüstefeld, C.;
Motylenko, M.;
Rafaja, D.

Publication type:

Article

KCl-Induced High-Temperature Corrosion Behavior of HVAF-Sprayed Ni-Based Coatings in Ambient Air.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 500, doi. 10.1007/s11666-017-0684-9

By:

Jafari, Reza;
Sadeghimeresht, Esmaeil;
Farahani, Taghi Shahrabi;
Huhtakangas, Matti;
Markocsan, Nicolaie;
Joshi, Shrikant

Publication type:

Article

Failure Analysis of Multilayered Suspension Plasma-Sprayed Thermal Barrier Coatings for Gas Turbine Applications.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 402, doi. 10.1007/s11666-017-0683-x

By:

Gupta, M.;
Markocsan, N.;
Rocchio-Heller, R.;
Liu, J.;
Li, X.-H.;
Östergren, L.

Publication type:

Article

The Influence of Heat Treatments on the Porosity of Suspension Plasma-Sprayed Yttria-Stabilized Zirconia Coatings.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 391, doi. 10.1007/s11666-017-0682-y

By:

Ekberg, Johanna;
Ganvir, Ashish;
Klement, Uta;
Creci, Simone;
Nordstierna, Lars

Publication type:

Article

Intermetallic Al-, Fe-, Co- and Ni-Based Thermal Barrier Coatings Prepared by Cold Spray for Applications on Low Heat Rejection Diesel Engines.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 456, doi. 10.1007/s11666-017-0681-z

By:

Leshchinsky, E.;
Sobiesiak, A.;
Maev, R.

Publication type:

Article

Microstructural Analysis and Transport Properties of Thermally Sprayed Multiple-Layer Ceramic Coatings.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 371, doi. 10.1007/s11666-017-0680-0

By:

Wang, Hsin;
Muralidharan, Govindarajan;
Leonard, Donovan N.;
Haynes, J. Allen;
Porter, Wallace D.;
England, Roger D.;
Hays, Michael;
Dwivedi, Gopal;
Sampath, Sanjay

Publication type:

Article

Effects of Laser Remelting and Oxidation on NiCrAlY/8Y2O3-ZrO2 Thermal Barrier Coatings.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 412, doi. 10.1007/s11666-017-0679-6

By:

Xu, S. Q.;
Zhu, C.;
Zhang, Y.

Publication type:

Article

Argon Shrouded Plasma Spraying of Tantalum over Titanium for Corrosion Protection in Fluorinated Nitric Acid Media.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 512, doi. 10.1007/s11666-017-0678-7

By:

Vetrivendan, E.;
Jayaraj, J.;
Ningshen, S.;
Mallika, C.;
Kamachi Mudali, U.

Publication type:

Article

Microstructure and Transparent Super-Hydrophobic Performance of Vacuum Cold-Sprayed Al2O3 and SiO2 Aerogel Composite Coating.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 471, doi. 10.1007/s11666-017-0677-8

By:

Li, Jie;
Zhang, Yu;
Ma, Kai;
Pan, Xi-De;
Li, Cheng-Xin;
Yang, Guan-Jun;
Li, Chang-Jiu

Publication type:

Article

The Effect of pH on Slurry Erosion–Corrosion of Tungsten Carbide Overlays Alloyed with Ru.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 483, doi. 10.1007/s11666-017-0676-9

By:

Nelwalani, Ndivhuwo B.;
van der Merwe, Josias W.

Publication type:

Article

Correction to: Optimization of Cold Spray Deposition of High-Density Polyethylene Powders.

Published in:

2018

By:

Bush, Trenton P.;
Zhalkhali, Zahra;
Champagne, Victor;
Schmidt, David P.;
Rothstein, Jonathan P.

Publication type:

Correction Notice

An Effective Electrical Resonance-Based Method to Detect Delamination in Thermal Barrier Coating.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 336, doi. 10.1007/s11666-017-0670-2

By:

Kim, Jong Min;
Park, Jae-Ha;
Lee, Ho Girl;
Kim, Hak-Joon;
Song, Sung-Jin;
Seok, Chang-Sung;
Lee, Young-Ze

Publication type:

Article

Modeling of Rapid Solidification with Undercooling Effect During Droplet Flattening on a Substrate in Coating Formation.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 269, doi. 10.1007/s11666-017-0666-y

By:

Shukla, Rajesh Kumar;
Patel, Virendra;
Kumar, Arvind

Publication type:

Article

Modeling of Thickness and Profile Uniformity of Thermally Sprayed Coatings Deposited on Cylinders.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 288, doi. 10.1007/s11666-017-0661-3

By:

Yanjun, Zhang;
Wenbo, Li;
Dayu, Li;
Jinkun, Xiao;
Chao, Zhang

Publication type:

Article

Effect of Substrate and Process Parameters on the Gas-Substrate Convective Heat Transfer Coefficient During Cold Spraying.

Published in:

Journal of Thermal Spray Technology, 2018, v. 27, n. 3, p. 433, doi. 10.1007/s11666-017-0660-4

By:

Mahdavi, Amirhossein;
McDonald, André

Publication type:

Article

Works matching IS 10599630 AND DT 2018 AND VI 27 AND IP 3

On the Interplay Between Adhesion Strength and Tensile Properties of Thermal Spray Coated Laminates—Part II: Low-Velocity Thermal Spray Coatings.

Microstructural Characteristics and Performances of Cr<sub>2</sub>O<sub>3</sub> and Cr<sub>2</sub>O<sub>3</sub><bold>-</bold>15%TiO<sub>2</sub> S-HVOF Coatings Obtained from Water-Based Suspensions.

Imaging Slit Pores Under Delaminated Splats by White Light Interference.

On the Interplay Between Adhesion Strength and Tensile Properties of Thermal Spray Coated Laminates—Part I: High Velocity Thermal Spray Coatings.

Kuroda Retires as Associate Editor; Hussain and Shinoda Join Editorial Team.

Structure and Corrosion Behavior of Arc-Sprayed Zn-Al Coatings on Ductile Iron Substrate.

Nanostructured Photocatalytic TiO<sub>2</sub> Coating Deposited by Suspension Plasma Spraying with Different Injection Positions.

Epitaxial Growth and Cracking Mechanisms of Thermally Sprayed Ceramic Splats.

Phase and Microstructure Evolution and Toughening Mechanism of a Hierarchical Architectured Al<sub>2</sub>O<sub>3</sub>–Y<sub>2</sub>O<sub>3</sub> Coating under High Temperature.

Novel Online Diagnostic Analysis for In-Flight Particle Properties in Cold Spraying.

The Influence of the Coating Deposition Process on the Interdiffusion Behavior Between Nickel-Based Superalloys and MCrAlY Bond Coats.

Essential Factors Influencing the Bonding Strength of Cold-Sprayed Aluminum Coatings on Ceramic Substrates.

KCl-Induced High-Temperature Corrosion Behavior of HVAF-Sprayed Ni-Based Coatings in Ambient Air.

Failure Analysis of Multilayered Suspension Plasma-Sprayed Thermal Barrier Coatings for Gas Turbine Applications.

The Influence of Heat Treatments on the Porosity of Suspension Plasma-Sprayed Yttria-Stabilized Zirconia Coatings.

Intermetallic Al-, Fe-, Co- and Ni-Based Thermal Barrier Coatings Prepared by Cold Spray for Applications on Low Heat Rejection Diesel Engines.

Microstructural Analysis and Transport Properties of Thermally Sprayed Multiple-Layer Ceramic Coatings.

Effects of Laser Remelting and Oxidation on NiCrAlY/8Y<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub> Thermal Barrier Coatings.

Argon Shrouded Plasma Spraying of Tantalum over Titanium for Corrosion Protection in Fluorinated Nitric Acid Media.

Microstructure and Transparent Super-Hydrophobic Performance of Vacuum Cold-Sprayed Al<sub>2</sub>O<sub>3</sub> and SiO<sub>2</sub> Aerogel Composite Coating.

The Effect of pH on Slurry Erosion–Corrosion of Tungsten Carbide Overlays Alloyed with Ru.

Correction to: Optimization of Cold Spray Deposition of High-Density Polyethylene Powders.

An Effective Electrical Resonance-Based Method to Detect Delamination in Thermal Barrier Coating.

Modeling of Rapid Solidification with Undercooling Effect During Droplet Flattening on a Substrate in Coating Formation.

Modeling of Thickness and Profile Uniformity of Thermally Sprayed Coatings Deposited on Cylinders.

Effect of Substrate and Process Parameters on the Gas-Substrate Convective Heat Transfer Coefficient During Cold Spraying.