Works matching IS 10474838 AND DT 2020 AND VI 72 AND IP 3
Results: 53
Additive Manufacturing—The 2nd Asia–Pacific International Conference on Additive Manufacturing (APICAM 2019)
- Published in:
- 2020
- By:
- Publication type:
- Editorial
Correction to: Aluminum Production in the Times of Climate Change: The Global Challenge to Reduce the Carbon Footprint and Prevent Carbon Leakage.
- Published in:
- 2020
- By:
- Publication type:
- Correction Notice
Advanced Manufacturing for Biomaterials and Biological Materials, Part I.
- Published in:
- 2020
- By:
- Publication type:
- Editorial
Formation of Deformation Bands in Hot-Worked SS 316LN.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1395, doi. 10.1007/s11837-020-04029-3
- By:
- Publication type:
- Article
Optimal Design for Metal Additive Manufacturing: An Integrated Computational Materials Engineering (ICME) Approach.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1092, doi. 10.1007/s11837-020-04028-4
- By:
- Publication type:
- Article
Fatigue Performance of Additively Manufactured Ti-6Al-4V: Surface Condition vs. Internal Defects.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1022, doi. 10.1007/s11837-020-04025-7
- By:
- Publication type:
- Article
Comparison of Microstructural Response to Heat Treatment of Inconel 718 Prepared by Three Different Metal Additive Manufacturing Processes.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1085, doi. 10.1007/s11837-020-04021-x
- By:
- Publication type:
- Article
Influence of Gas Flow Speed on Laser Plume Attenuation and Powder Bed Particle Pickup in Laser Powder Bed Fusion.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1039, doi. 10.1007/s11837-020-04020-y
- By:
- Publication type:
- Article
Revealing the Mechanisms of Grain Nucleation and Formation During Additive Manufacturing.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1065, doi. 10.1007/s11837-020-04019-5
- By:
- Publication type:
- Article
Effect of Compositional Variation Induced by EBM Processing on Deformation Behavior and Phase Stability of Austenitic Cr-Mn-Ni TRIP Steel.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1052, doi. 10.1007/s11837-020-04018-6
- By:
- Publication type:
- Article
Improvements in Ductility and Reliability of Mechanical Properties of Polyamide 11 Produced Using Laser-Based Powder Bed Fusion.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1009, doi. 10.1007/s11837-020-04017-7
- By:
- Publication type:
- Article
Tantalum Bone Implants Printed by Selective Electron Beam Manufacturing (SEBM) and Their Clinical Applications.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1016, doi. 10.1007/s11837-020-04016-8
- By:
- Publication type:
- Article
Probing Ultrafast Dynamics in Laser Powder Bed Fusion Using High-Speed X-Ray Imaging: A Review of Research at the Advanced Photon Source.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 999, doi. 10.1007/s11837-020-04015-9
- By:
- Publication type:
- Article
PolyJet 3D Printing of Composite Materials: Experimental and Modelling Approach.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1105, doi. 10.1007/s11837-020-04014-w
- By:
- Publication type:
- Article
A Review on Additive Manufacturing of Shape-Memory Materials for Biomedical Applications.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1229, doi. 10.1007/s11837-020-04013-x
- By:
- Publication type:
- Article
Grain Growth During Keyhole Mode Pulsed Laser Powder Bed Fusion of IN738LC.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1074, doi. 10.1007/s11837-020-04012-y
- By:
- Publication type:
- Article
Effects of Process Gas Pressure and Type on Oxygen Content in Sintered Titanium Produced using Jet-Milled Titanium Hydride Powders.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1286, doi. 10.1007/s11837-020-04010-0
- By:
- Publication type:
- Article
A Novel Method for Making Co-Cr-Mo Alloy Spherical Powder by Granulation and Sintering.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1279, doi. 10.1007/s11837-020-04009-7
- By:
- Publication type:
- Article
Effect of Oxygen Flow Rate on the Particle Size Distribution and Morphology of the Ultrafine Rhenium Powders Prepared by CVD.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1273, doi. 10.1007/s11837-020-04008-8
- By:
- Publication type:
- Article
Hylotelephium telephium Flower Extract-Mediated Biosynthesis of CuO and ZnO Nanoparticles with Promising Antioxidant and Antibacterial Properties for Healthcare Applications.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1264, doi. 10.1007/s11837-020-04007-9
- By:
- Publication type:
- Article
Effect of B<sub>2</sub>O<sub>3</sub> on Structure of Glassy F-Free CaO-SiO<sub>2</sub>-B<sub>2</sub>O<sub>3</sub> Systems by <sup>29</sup>Si MAS NMR and Raman Spectroscopy.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1414, doi. 10.1007/s11837-020-04006-w
- By:
- Publication type:
- Article
Characterization and Properties of CuZrAlTiNiSi High Entropy Alloy Coating Obtained By Mechanical Alloying and Vacuum Hot-Pressing Sintering.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1254, doi. 10.1007/s11837-020-04005-x
- By:
- Publication type:
- Article
Microwave Processing of Biomaterials for Orthopedic Implants: Challenges and Possibilities.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1211, doi. 10.1007/s11837-020-04003-z
- By:
- Publication type:
- Article
Microscale Analysis of Melt Pool Dynamics Due To Particle Impingement and Laser-Matter Interaction in the Spot Laser Metal Deposition Process.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1138, doi. 10.1007/s11837-019-04000-x
- By:
- Publication type:
- Article
A Materials Perspective on the Design of Damage-Resilient Bone Implants Through Additive/Advanced Manufacturing.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1195, doi. 10.1007/s11837-019-03999-3
- By:
- Publication type:
- Article
Optimization of Spark Plasma Sintering Parameters Using the Taguchi Method for Developing Mg-Based Composites.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1186, doi. 10.1007/s11837-019-03997-5
- By:
- Publication type:
- Article
Microstructure and Mechanical Property of Ti-5Al-2.5Sn/Ti-6Al-4V Dissimilar Titanium Alloys Integrally Fabricated by Selective Laser Melting.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1031, doi. 10.1007/s11837-019-03988-6
- By:
- Publication type:
- Article
The Formation of Humps and Ripples During Selective Laser Melting of 316l Stainless Steel.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1128, doi. 10.1007/s11837-019-03987-7
- By:
- Publication type:
- Article
Effects of Postprocess Thermal Treatments on Static and Cyclic Deformation Behavior of Additively Manufactured Austenitic Stainless Steel.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1355, doi. 10.1007/s11837-019-03983-x
- By:
- Publication type:
- Article
Study of the Parameters Influencing the Temperature Distribution in UDD in Traveling Grate Using CFD and Orthogonal Testing.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1406, doi. 10.1007/s11837-019-03981-z
- By:
- Publication type:
- Article
Macro-alloying Effects of Al and Ag on the Age-Hardening Behavior and Precipitates Microstructure of a Mg-4Sn Alloy.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1384, doi. 10.1007/s11837-019-03980-0
- By:
- Publication type:
- Article
Towards Functionally Graded Sand Molds for Metal Casting: Engineering Thermo-mechanical Properties Using 3D Sand Printing.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1340, doi. 10.1007/s11837-019-03975-x
- By:
- Publication type:
- Article
Ad Hoc Heat Treatments for Selective Laser Melted Alsi10mg Alloy Aimed at Stress-Relieving and Enhancing Mechanical Performances.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1118, doi. 10.1007/s11837-019-03973-z
- By:
- Publication type:
- Article
The Effect of Rolling Temperature on the Microstructure and Mechanical Properties of 5 vol.% (TiB<sub>w</sub> + TiC<sub>p</sub>)/Ti Composites.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1376, doi. 10.1007/s11837-019-03972-0
- By:
- Publication type:
- Article
Fabrication and Characterization of High-Purity Alumina Ceramics Doped with Zirconia via Laser Direct Deposition.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1299, doi. 10.1007/s11837-019-03969-9
- By:
- Publication type:
- Article
Flatwise Compression and Local Indentation Response of 3D-Printed Strut-Reinforced Kagome with Polyurethane Filling.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1324, doi. 10.1007/s11837-019-03968-w
- By:
- Publication type:
- Article
Electrophotographic Multilayer Powder Pattern Deposition for Additive Manufacturing.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1366, doi. 10.1007/s11837-019-03965-z
- By:
- Publication type:
- Article
Penelope: A Novel Prototype for In Situ Defect Removal in LPBF.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1332, doi. 10.1007/s11837-019-03964-0
- By:
- Publication type:
- Article
Effective In-Plane Moduli of Fused Filament Fabrication Material with Aligned Mesostructure.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1314, doi. 10.1007/s11837-019-03963-1
- By:
- Publication type:
- Article
Hydrothermal-Assisted Transient Binder Jetting of Ceramics for Achieving High Green Density.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1307, doi. 10.1007/s11837-019-03962-2
- By:
- Publication type:
- Article
Mechanical Performance of Additively Manufactured Fiber-Reinforced Functionally Graded Lattices.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1292, doi. 10.1007/s11837-019-03961-3
- By:
- Publication type:
- Article
Effects of Stress-Relieving Heat Treatment on Impact Toughness of Direct Metal Laser Sintering (DMLS)-Produced Ti6Al4V (ELI) Parts.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1175, doi. 10.1007/s11837-019-03862-5
- By:
- Publication type:
- Article
Study on Fe-xGO Composites Prepared by Selective Laser Melting: Microstructure, Hardness, Biodegradation and Cytocompatibility.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1163, doi. 10.1007/s11837-019-03814-z
- By:
- Publication type:
- Article
Effect of Al Addition on Structural, Magnetic, and Antimicrobial Properties of Ag Nanoparticles for Biomedical Applications.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 1154, doi. 10.1007/s11837-019-03784-2
- By:
- Publication type:
- Article
call for papers.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 995, doi. 10.1007/s11837-020-04069-9
- Publication type:
- Article
TMS meeting headlines.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 994, doi. 10.1007/s11837-020-04068-w
- Publication type:
- Article
A Mark of Exceptional Promise: The 2020 TMS Young Leaders.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 988, doi. 10.1007/s11837-020-04067-x
- Publication type:
- Article
At the Forefront of Nuclear Materials Science with Assel Aitkaliyeva.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 987, doi. 10.1007/s11837-020-04066-y
- Publication type:
- Article
Building on Discovery: A Preview of 3DMS 2020.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 985, doi. 10.1007/s11837-020-04065-z
- Publication type:
- Article
A Simple Plan Revisited: 2019 TMS President James Foley Talks With JOM.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 3, p. 982, doi. 10.1007/s11837-020-04064-0
- Publication type:
- Article