Works matching IS 10474838 AND DT 2016 AND VI 68 AND IP 3
Results: 47
Preparation of MoO by the Solid State Reaction Between MoS and MoO.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 1031, doi. 10.1007/s11837-015-1681-4
- By:
- Publication type:
- Article
Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible Microstructure.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 930, doi. 10.1007/s11837-015-1754-4
- By:
- Publication type:
- Article
Erratum to: Microstructural Evolution of Chloride-Cleaned Silicon Carbide Aluminum Composites.
- Published in:
- 2016
- By:
- Publication type:
- Erratum
Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 724, doi. 10.1007/s11837-015-1759-z
- By:
- Publication type:
- Article
Rapid Solidification: Selective Laser Melting of AlSi10Mg.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 960, doi. 10.1007/s11837-015-1763-3
- By:
- Publication type:
- Article
Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 943, doi. 10.1007/s11837-015-1764-2
- By:
- Publication type:
- Article
Laser Additive Melting and Solidification of Inconel 718: Finite Element Simulation and Experiment.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 967, doi. 10.1007/s11837-015-1765-1
- By:
- Publication type:
- Article
Effect of Withdrawal Rate and Gd on the Microstructures of Directionally Solidified NiAl-Cr(Mo) Hypereutectic Alloy.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 1037, doi. 10.1007/s11837-015-1766-0
- By:
- Publication type:
- Article
Understanding the Microstructure Formation of Ti-6Al-4V During Direct Laser Deposition via In-Situ Thermal Monitoring.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 778, doi. 10.1007/s11837-015-1767-z
- By:
- Publication type:
- Article
The Influence of As-Built Surface Conditions on Mechanical Properties of Ti-6Al-4V Additively Manufactured by Selective Electron Beam Melting.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 791, doi. 10.1007/s11837-015-1768-y
- By:
- Publication type:
- Article
Effects of Powder Attributes and Laser Powder Bed Fusion (L-PBF) Process Conditions on the Densification and Mechanical Properties of 17-4 PH Stainless Steel.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 860, doi. 10.1007/s11837-015-1770-4
- By:
- Publication type:
- Article
Process Development of Porcelain Ceramic Material with Binder Jetting Process for Dental Applications.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 831, doi. 10.1007/s11837-015-1771-3
- By:
- Publication type:
- Article
Unexpected δ-Phase Formation in Additive-Manufactured Ni-Based Superalloy.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 950, doi. 10.1007/s11837-015-1772-2
- By:
- Publication type:
- Article
In Situ Synchrotron X-Ray Diffraction and Small Angle X-Ray Scattering Studies on Rapidly Heated and Cooled Ti-Al and Al-Cu-Mg Alloys Using Laser-Based Heating.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 978, doi. 10.1007/s11837-015-1774-0
- By:
- Publication type:
- Article
Additive Manufacturing of Reactive In Situ Zr Based Ultra-High Temperature Ceramic Composites.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 822, doi. 10.1007/s11837-015-1777-x
- By:
- Publication type:
- Article
A Honeycomb-Structured Ti-6Al-4V Oil-Gas Separation Rotor Additively Manufactured by Selective Electron Beam Melting for Aero-engine Applications.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 799, doi. 10.1007/s11837-015-1778-9
- By:
- Publication type:
- Article
A Combinatorial Approach to the Investigation of Metal Systems that Form Both Bulk Metallic Glasses and High Entropy Alloys.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 1021, doi. 10.1007/s11837-015-1779-8
- By:
- Publication type:
- Article
Sintering in Laser Sintering.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 885, doi. 10.1007/s11837-015-1780-2
- By:
- Publication type:
- Article
Spark Plasma Sintering of Aluminum-Magnesium-Matrix Composites with Boron Carbide and Tungsten Nano-powder Inclusions: Modeling and Experimentation.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 908, doi. 10.1007/s11837-015-1781-1
- By:
- Publication type:
- Article
Analysis of Glass-Filled Nylon in Laser Powder Bed Fusion Additive Manufacturing.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 811, doi. 10.1007/s11837-015-1792-y
- By:
- Publication type:
- Article
Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 985, doi. 10.1007/s11837-015-1793-x
- By:
- Publication type:
- Article
Accelerating Industrial Adoption of Metal Additive Manufacturing Technology.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 806, doi. 10.1007/s11837-015-1794-9
- By:
- Publication type:
- Article
Sintering Trajectories: Description on How Density, Surface Area, and Grain Size Change.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 878, doi. 10.1007/s11837-015-1795-8
- By:
- Publication type:
- Article
Texture Evolution During Laser Direct Metal Deposition of Ti-6Al-4V.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 772, doi. 10.1007/s11837-015-1797-6
- By:
- Publication type:
- Article
Characterization of an Aluminum Alloy Hemispherical Shell Fabricated via Direct Metal Laser Melting.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 1000, doi. 10.1007/s11837-015-1798-5
- By:
- Publication type:
- Article
Additive Manufacturing in the Minerals, Metals, and Materials Community: Past, Present, and Exciting Future.
- Published in:
- 2016
- By:
- Publication type:
- Editorial
Experimental Study of Disruption of Columnar Grains During Rapid Solidification in Additive Manufacturing.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 842, doi. 10.1007/s11837-015-1800-2
- By:
- Publication type:
- Article
Ultra-High Strength and Ductile Lamellar-Structured Powder Metallurgy Binary Ti-Ta Alloys.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 899, doi. 10.1007/s11837-015-1801-1
- By:
- Publication type:
- Article
Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 765, doi. 10.1007/s11837-015-1802-0
- By:
- Publication type:
- Article
Fabrication of High Strength and Ductile Stainless Steel Fiber Felts by Sintering.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 890, doi. 10.1007/s11837-015-1803-z
- By:
- Publication type:
- Article
A Metallurgical Evaluation of the Powder-Bed Laser Additive Manufactured 4140 Steel Material.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 869, doi. 10.1007/s11837-015-1804-y
- By:
- Publication type:
- Article
Overview of Materials Qualification Needs for Metal Additive Manufacturing.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 747, doi. 10.1007/s11837-015-1810-0
- By:
- Publication type:
- Article
Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 1012, doi. 10.1007/s11837-016-1812-6
- By:
- Publication type:
- Article
Advances in Sintering.
- Published in:
- 2016
- By:
- Publication type:
- Editorial
Rapid Solidification and Phase Transformations in Additive Manufactured Materials.
- Published in:
- 2016
- By:
- Publication type:
- Editorial
The Role of Oxygen Transfer in Sintering of Low Alloy Steel Powder Compacts: A Review of the 'Internal Getter' Effect.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 920, doi. 10.1007/s11837-016-1819-z
- By:
- Publication type:
- Article
Fatigue Performance of Powder Metallurgy (PM) Ti-6Al-4V Alloy: A Critical Analysis of Current Fatigue Data and Metallurgical Approaches for Improving Fatigue Strength.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 735, doi. 10.1007/s11837-016-1821-5
- By:
- Publication type:
- Article
Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 850, doi. 10.1007/s11837-016-1822-4
- By:
- Publication type:
- Article
In the Final Analysis.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 701, doi. 10.1007/s11837-016-1827-z
- Publication type:
- Article
AAES 2015 Salary Survey: Career Choices Quantified.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 708, doi. 10.1007/s11837-016-1828-y
- Publication type:
- Article
2016 Editorial Calendar.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 719, doi. 10.1007/s11837-016-1829-x
- Publication type:
- Article
Metallurgical and Materials Transactions Announces Incoming Principal Editor; JOM Best Paper Awards.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 704, doi. 10.1007/s11837-016-1830-4
- Publication type:
- Article
Member News.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 702, doi. 10.1007/s11837-016-1831-3
- Publication type:
- Article
Building the Global Professional Community: A Priority for the Year Ahead.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 706, doi. 10.1007/s11837-016-1832-2
- Publication type:
- Article
Meet the 2016 Young Leaders Awardees.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 710, doi. 10.1007/s11837-016-1833-1
- Publication type:
- Article
TMS Meeting Headlines.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 718, doi. 10.1007/s11837-016-1834-0
- Publication type:
- Article
The Effect of Nanosized Pb Liquid Phase on the Damping Behavior in Aluminum Matrix Composite Based on the 2024Al-BaPbO System.
- Published in:
- JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2016, v. 68, n. 3, p. 1027, doi. 10.1007/s11837-015-1664-5
- By:
- Publication type:
- Article