Works matching IS 10427147 AND DT 2024 AND VI 35 AND IP 4
Results: 55
Issue Information.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6091
- Publication type:
- Article
Novel sulfonated calixarenes derived crosslinker for reinforcing and toughening collagen: Relevance between structure and properties.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6378
- By:
- Publication type:
- Article
Biodegradable poly(lactic acid)/poly(propylene carbonate) blend with enhanced mechanical properties and heat resistance by uniaxial pre-stretching.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6395
- By:
- Publication type:
- Article
Pressure-dependent adhesion between solid-supported PC-lipid bilayers and vesicles under electric fields.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6376
- By:
- Publication type:
- Article
Optimizing cleanup of highly viscous oil spills: A biomass-based aerogel with photothermal conversion and joule heating for a dual-energy absorption device.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6359
- By:
- Publication type:
- Article
Enhanced mechanical properties of polyphenylene sulfide and liquid crystal polymer composites by interfacial bonding capacity of graft-modified graphene oxide and glass fibers.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6363
- By:
- Publication type:
- Article
Preparation of superhydrophobic asymmetric vitrimer coating with high porosity and the key role of hierarchical pocket structure on long freeze delay time and high durability.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6393
- By:
- Publication type:
- Article
Enhanced performance of environmental resistance and reprocessability of epoxidized natural rubber via incorporating fluorinated short side chains and β-hydroxyl ester bonds.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6380
- By:
- Publication type:
- Article
Wood consolidation through an epoxy-acrylic gamma-crosslinked three-dimensional system.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6381
- By:
- Publication type:
- Article
Dragline silk fibers from golden orb-web spider Trichonephila clavata ensure structural and mechanical robustness against ultraviolet radiation.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6410
- By:
- Publication type:
- Article
Nanocarrier-embedded gels: Precision drug delivery via liposomal and niosomal platforms.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6406
- By:
- Publication type:
- Article
Exploring the efficacy of various essential oils in chitosan-based composite biopolymer films for food packaging.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6371
- By:
- Publication type:
- Article
Incorporation of nanoparticles in silk fibroin solution: Toward water-stable silk fibroin films possessing silk I structure.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6392
- By:
- Publication type:
- Article
Improvement of mechanical properties of highly ZnO-filled polyethylene composites by dual-compatibilizer for hydrogen sulfide permeation inhibition.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6377
- By:
- Publication type:
- Article
Structural relaxation in a Schiff base-crosslinked aldehyde modified xanthan gum/gelatin hydrogel: Experimental and numerical validation using linear poroelasticity model.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6402
- By:
- Publication type:
- Article
Effect of hydroxyapatite and pulsed electromagnetic field on osteogenic differentiation of human stem cells seeded onto 3D-printed polycaprolactone scaffolds for future bone graft transplantation.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6386
- By:
- Publication type:
- Article
Zinc oxide nanoparticles reinforced gelatin/starch bio-nanocomposite film for UV-ray protection and antimicrobial resistance.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6388
- By:
- Publication type:
- Article
Chitosan-containing electrospun poly(ethylene oxide)-polybutadiene-CNT fibers.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6403
- By:
- Publication type:
- Article
Characterization and therapeutic potential of chitosan-zinc oxide nanostructured particles synthesized using crab shell derived biopolymer.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6370
- By:
- Publication type:
- Article
Non-linear functional polymers containing selective/cleavable bonds: Synthesis and their biomedical applications.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6387
- By:
- Publication type:
- Article
Novel simulation of the blood--brain barrier using the polyacrylonitrile electrospun nanofibrous membrane on 3D-printed Transwell.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6401
- By:
- Publication type:
- Article
Synthesis and electrochemical testing of novel doped polyaniline and biomass-derived carbon-based composite for supercapacitors.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6362
- By:
- Publication type:
- Article
Polymers as candidates for broad-spectrum antivirals--in vitro inhibition of Zika virus with sodium polyanethole sulfonate.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6368
- By:
- Publication type:
- Article
Polyurethane-based nanocomposite for catalytic reduction of toxic dyes.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6372
- By:
- Publication type:
- Article
Recent progress of cotton fabric based on bio-inspired modification for oil/water separation.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6385
- By:
- Publication type:
- Article
Bioactive materials-coated polybutylene-adipate-co-terephthalate 3D-printed scaffolds for application in the bone tissues engineering.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6373
- By:
- Publication type:
- Article
Poly(vinyl alcohol)/graphene nanoplatelet nanocomposites: Elucidation of the nanofiller, dispersing agent, and interphase effects on thermomechanical properties.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6399
- By:
- Publication type:
- Article
Enhancing photocatalytic degradation of crystal violet dye with g-C<sub>3</sub>N<sub>4</sub>/ZnTiO<sub>3</sub> nanocomposites synthesized via a facile approach.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6355
- By:
- Publication type:
- Article
Enhanced inactivation of Staphylococcus aureus and Escherichia coli using conjugated polyindole polymer nanoparticles under visible light irradiation.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6367
- By:
- Publication type:
- Article
Facile synthesis of a novel organic salt containing DOPO and pyrimidine as a reactive additive for high-efficiency flame retarding epoxy resin.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6358
- By:
- Publication type:
- Article
Taguchi--gray relational analysis of eccentricity and tilt of multilens module mount fabricated by injection compression molding.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6391
- By:
- Publication type:
- Article
A flame-retardant, dendrite-inhibiting sandwich separator prepared by electrospinning for high-performance and safety lithium batteries.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6384
- By:
- Publication type:
- Article
Green synthesis of gold nanoparticles using macroalgae Halimeda macroloba extract and their photocatalytic degradation of methylene blue and methyl orange.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6383
- By:
- Publication type:
- Article
Mechanical properties of additively manufactured polymeric composites using sheet lamination technique and fused deposition modeling: A review.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6396
- By:
- Publication type:
- Article
Syntheses of high molecular mass polyglycolides via ring-opening polymerization with simultaneous polycondensation (ROPPOC) by means of tin and zinc catalysts.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6365
- By:
- Publication type:
- Article
Improving the mechanical properties of vulcanizates containing ground tire rubber: Recipe optimization with the Taguchi method.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6389
- By:
- Publication type:
- Article
Applications of surface-grafted polymer brushes with various architectures.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6397
- By:
- Publication type:
- Article
An assessment of the role of nanosilica in thermal/thermooxidative degradation mechanism of poly(lactic acid)/polybutylene adipate terephthalate blend nanocomposites.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6374
- By:
- Publication type:
- Article
Development of chitosan by using a zeolite-supported CaO derived from waste chicken eggshell to remove Acid Red 1 dye from the aqueous solution.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6408
- By:
- Publication type:
- Article
Synergistic enhancement: Ammonium Polyphosphate's impact on hybrid coating performance against corrosion and fire.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6398
- By:
- Publication type:
- Article
Κ-Carrageenan/poly(sodium styrenesulfonate-co-acrylic acid) macroporous anionic monoliths: Dye adsorption and oil--water separation properties.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6375
- By:
- Publication type:
- Article
Polyester networks based on Tulipalin A and ε-caprolactone and activation of the Thioether groups by incorporation of trialkylsulfonium salts.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6404
- By:
- Publication type:
- Article
Design and synthesis of low-dieclectric polyaryl ethers containing bulky tetraphenyl vinyl pendant group.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6357
- By:
- Publication type:
- Article
A rare-earth-based nano-flame retardant with 2D MXene for improving fire safety and mechanical property of thermoplastic polyurethane composites.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6364
- By:
- Publication type:
- Article
A comprehensive review on surface modifications of polymer-based 3D-printed structures: Metal coating prospects and challenges.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6369
- By:
- Publication type:
- Article
Preparation of PBI membranes with controlled thickness for use in PEMFCs and the impact on water and phosphoric acid uptake.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6360
- By:
- Publication type:
- Article
Magnetorheological response of Permalloy@styrene-b-(ethylene-co-butylene)-b-styrene elastomers as a function of filler concentration.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6379
- By:
- Publication type:
- Article
Tumor microenvironment-responsive hyaluronic acid-oxaliplatin nanoparticles enhanced tumor cell elimination.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6405
- By:
- Publication type:
- Article
Preparation and properties of novolac epoxy resins containing polycyclic aromatic hydrocarbons.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6394
- By:
- Publication type:
- Article
Synthesis of chitosan and gum arabic functionalized silver nanocomposite for efficient removal of methylene blue and antibacterial activity.
- Published in:
- Polymers for Advanced Technologies, 2024, v. 35, n. 4, p. 1, doi. 10.1002/pat.6356
- By:
- Publication type:
- Article