Works matching IS 10427147 AND DT 2024 AND VI 35 AND IP 11

Results: 34

Xanthan Gum Production and Its Modifications to Obtain Novel Applications: A Review.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.70004

By:

Onofre‐Rentería, Karen;
Cabrera‐Munguía, Denis Aidée;
Cobos‐Puc, Luis Enrique;
Claudio‐Rizo, Jesús Alejandro;
Morales‐Oyervides, Lourdes;
Oyervides‐Muñoz, Ernesto

Publication type:

Article

A 3D Nerve Guidance Conduit Surface With a Wrinkled Protein Coating Toward Peripheral Nerve Injury Repair.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.70003

By:

Oguntade, Elizabeth;
Agyapong, Johnson N.;
O'Grady, Kerrin;
Henderson, James H.

Publication type:

Article

Investigation on the Low‐Frequency Acoustic Performance of Polymer Matrix Composite With Metallic Hollow Spheres Under Different Acoustic Stack Structures.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6647

By:

Guo, Chunhuan;
Sun, Peng;
Shao, Shuaiqi;
Yu, Tianmiao;
Jiang, Fengchun;
Li, Yanchun;
Cui, Xianghong;
Li, Junqing

Publication type:

Article

Compatibilization of Post‐Consumer Recycled Polypropylene/Polyethylene Binary Blends.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6645

By:

Tal, Adir;
Naveh, Naum

Publication type:

Article

Preparation and Characterization of Quick‐Setting Poly Cyanoacrylate Foams.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6643

By:

Moslehi, Mohsen;
Rajabi‐Rozbahani, Ehsan;
Mirzaei‐Mosbat, Maryam

Publication type:

Article

The Torsional Characterization of 3D‐Printed Polylactic Acid Parts With Alternating Additive Manufacturing Parameters.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6642

By:

Saraç, İsmail;
Horasan, Murat

Publication type:

Article

Fabrication and Radiation Shielding Properties of (HDPE/Colemanite)‐(HDPE/Bi2O3) Multi‐Layer Composites.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6640

By:

Duran, Selcen Uzun;
Alver, Ümit;
Demirköz, M. Bilge;
Mucogllava, Brunilda;
Çava, Kutay;
Aslan, Mustafa;
Özkalaycı, Fatih;
Dindar, Osman

Publication type:

Article

On the Effect of Fibre Orientation and MWCNTs on the Strain‐Sensing Performance of TPU/PANI Electrospun Nanofibres.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6639

By:

Khedewy, Amira T.;
Saleh, Dalia I.;
Shaker, A.

Publication type:

Article

Translation Prospects of a Novel ECM‐Silk Fibroin/Alginate 3D‐Printed Scaffold for Treatment of Full‐Thickness Skin Wounds: An In Vitro and In Vivo Study.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6637

By:

Khosrowpour, Zahra;
Bashiri, Zahra;
Jafari, Davod;
Alizadeh, Sanaz;
Keshtkaran, Zahra;
Rezaei, Behzad;
Bargrizaneh, Farshad;
Abdollahpour‐Alitappeh, Meghdad;
Gholipourmalekabadi, Mazaher

Publication type:

Article

Adsorption Capacity Prediction and Optimization of Electrospun Nanofiber Membranes for Estrogenic Hormone Removal Using Machine Learning Algorithms.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6638

By:

Yasir, Muhammad;
Haq, Hamza Ul;
Khan, Muhammad Nouman Aslam;
Gul, Jawad;
Zubair, Mukarram;
Sedlařík, Vladimír

Publication type:

Article

Fabrication of Antibacterial and Flexible Hydrogels Based on Citric Acid Containing Tannic Acid for Wound Dressing.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6636

By:

Seyedzadeh, Zahra Sadat;
Sabzevari, Alireza;
Kabiri, Kourosh;
Ansari, Mojtaba;
Eslami, Hossein

Publication type:

Article

Characterization of Biocompatible Gellan Gum Fractions for Prolonged Retention in Ocular Drug Delivery Systems.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6635

By:

Tatykhanova, Gulnur S.;
Tuleyeva, Rysgul N.;
Gizatullina, Nargiz N.;
Kaldybekov, Daulet B.;
Bardadym, Yuliia V.;
Aseyev, Vladimir O.;
Kudaibergenov, Sarkyt E.

Publication type:

Article

Construction of Aligned Polycaprolactone/Poly(Glycerol Sebacate)/Polysulfone Nanofibrous Scaffolds for Tissue Engineering of the Ventricularis Layer of Heart Valves.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6629

By:

Gürbüz, Betül;
Baran, Erkan Türker;
Tahmasebifar, Aydın;
Yilmaz, Bengi

Publication type:

Article

Preparation of a New Hydrophobic Modified Starch and Its Effect on Paper Properties.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6628

By:

Wang, Feng;
Zhao, WenGuang;
Zhang, Yazeng;
Lin, Benping;
Zhu, Hongwei;
Deng, Fengwei;
Chen, Qi‐Jie

Publication type:

Article

Electrospun Polylactic Acid/Polyethylene Glycol/ Silicate‐Chlorinated Bioactive Glass Composite Scaffolds for Potential Bone Regeneration.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6627

By:

Souza, Joyce R. de;
Kukulka, Elisa C.;
Kito, Letícia T.;
de Sá Alves, Mariana;
dos Santos, Verônica R.;
Trichês, Eliandra S.;
Vasconcellos, Luana M. R.;
Thim, Gilmar P.;
Campos, Tiago M. B.;
Borges, Alexandre L. S.

Publication type:

Article

From Textile and Mine Waste Into Sustainable, Low‐Cost and Valuable Nanotextile Fabric‐Based Composites Through Electrospinning Technique.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6633

By:

Metwally, Bahaa S.;
Gumaah, Najla F.;
AL‐Mhyawi, Saedah R.;
Ragab, Ahmed H.;
Masoud, Mostafa A.;
Zayed, Ahmed M.

Publication type:

Article

Preparation and Performance Study of PEK‐C‐OH/MWCNT‐COOH/Graphite Composite Bipolar Plates for PEMFCs With Improved Interface Properties.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6630

By:

Li, Wenkai;
Zeng, Haodong;
Xie, Zhiyong

Publication type:

Article

Robust Dual Crosslinking Ionic Network for High‐Performance Cis‐1, 4‐Polyisoprene Latex/Sodium Alginate Composites.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6634

By:

Guo, Liyun;
Zhang, Haichang;
Hua, Jing;
Liu, Jinhui

Publication type:

Article

Proposal of a Biobased and Biodegradable Polymer as a Hot Embossing Substrate for Holographic Security Marks Fabrication.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6626

By:

Panaitescu, Denis Mihaela;
Oprică, Gabriela Mădălina;
Gabor, Augusta Raluca;
Nicolae, Cristian Andi;
Frone, Adriana Nicoleta;
Mihăilescu, Mona

Publication type:

Article

Tragacanth Gum/Trimethyl Chitosan‐Derived Polyelectrolyte Complex as Potential Carriers in Drug Delivery Applications.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6632

By:

Babaladimath, Gangadhar;
Chapi, Sharanappa;
MV, Murugendrappa;
Badiger, Hanamanta;
Raghu, Anjanapura V.

Publication type:

Article

Biotoxicity Evaluation of Biodegradable Polymeric Particles: Exploring the Possible Adverse Impacts on Biological Systems.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6631

By:

Kim, Yoonyoung;
Lee, Eunsol;
Kim, Jiseung;
Shin, Giyoung;
Oh, Dongyeop X.;
Park, Sung Bae;
Park, Jeyoung;
Lee, Eun Seong

Publication type:

Article

Effect of Films on In‐Mold Decoration and Microcellular Foaming Injection Molding Parts: Cell Structure, Surface, Warpage, and Mechanical Properties.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6625

By:

Guo, Wei;
Zhao, Jialong;
Zhao, Feng;
Feng, Tao;
Yan, Kui

Publication type:

Article

Heat‐Treatment and Water Immersion Effect on the Mechanical Properties and Joint Strength of 3D‐Printed Polylactic Acid Parts.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6624

By:

Öztürk, Fatih Huzeyfe;
Öz, Özkan

Publication type:

Article

Poly(Vinylidene Fluoride‐Hexafluoropropylene) Composites With Carbon Based Nanofillers for Electromagnetic Interference Shielding.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6623

By:

Langrock, Alex;
Kareem, Haval;
Auletta, Jeffrey T.

Publication type:

Article

MXene—Reclaimed Cellulose Acetate Composites for Methylene Blue Removal Through Synergistic Adsorption and Photocatalysis.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6622

By:

Subash, Alsha;
Sen, Sanchari;
Naebe, Minoo;
Kandasubramanian, Balasubramanian;
Kulthe, Manisha;
Kore, Akansha

Publication type:

Article

An Overview of the Mechanical Behavior of Nanocomposites Considering the Interphase.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6620

By:

Raoux, Nicolas;
Benelfellah, Abdelkibir;
AÏT Hocine, Nourredine

Publication type:

Article

Recent Advances in Biomaterial‐Based Scaffolds for Guided Bone Tissue Engineering: Challenges and Future Directions.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6619

By:

Tupe, Akshay;
Patole, Vinita;
Ingavle, Ganesh;
Kavitkar, Gaurav;
Mishra Tiwari, Ruchi;
Kapare, Harshad;
Baheti, Radhika;
Jadhav, Pranali

Publication type:

Article

Preparation of an Injectable Thermosensitive Pluronic F127/ γ‐Fe2O3 Hydrogel for Combined Hyperthermia and Localized Drug Delivery for Cancer Treatment.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6616

By:

Farzaneh, Mahtab;
Hassanzadeh‐Tabrizi, Sayed Ali;
Mokhtarian, Nader

Publication type:

Article

Preparation and Application of Molecularly Imprinted Polymers for Alkaloids: Review.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6614

By:

Fang, Chuanjian;
Wang, Jing;
Gu, Zhengwei;
Han, Chunchao

Publication type:

Article

Mechanical, Thermal, and Electrical Characterization of Polyethylene Glycol and PDI‐Based Polyurethane Films for Durable Antistatic Applications.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6612

By:

Zia, Abid;
Nawaz, Faisal;
Farooq, Aroosa;
khan, Musammir

Publication type:

Article

Proposing Novel Biological Scaffolds for the Regeneration of the Dura Mater.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6602

By:

Monazah, Mohammad Mehdi;
Alimohammadi, Ehsan;
Rostaminasab, Gelavizh;
Zarrintaj, Payam;
Rezakhani, Leila

Publication type:

Article

Formula Design of Hyperbranched Polyarylether‐Based Low Dielectric Photosensitive Resin and Study of UV‐Cured Films Properties.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6598

By:

Jiang, Lingmei;
Wang, Chenghao;
Xiao, Changhong;
Zhang, Guangsheng;
Wang, Yibo;
Liu, Haoran;
Yuan, Kuanyu;
Zong, Lishuai;
Wang, Jinyan;
Jian, Xigao

Publication type:

Article

Assessing the Bactericidal Effectiveness of Clove Oil Nanoemulsion‐Loaded Polycaprolactone Nanofibers for Eco‐Friendly and Endurable Food Packaging.

Published in:

Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6594

By:

Kenawy, El‐Refaie;
Hemdan, Bahaa A.;
Abdel‐Sattar, Raghda;
Khairallah, Mohamed R.;
Shendy, Samah;
Morsy, Osama M.;
El‐Naggar, Mehrez E.

Publication type:

Article

Issue Information.

Published in:: Polymers for Advanced Technologies, 2024, v. 35, n. 11, p. 1, doi. 10.1002/pat.6098
Publication type:: Article

Works matching IS 10427147 AND DT 2024 AND VI 35 AND IP 11

Xanthan Gum Production and Its Modifications to Obtain Novel Applications: A Review.

A 3D Nerve Guidance Conduit Surface With a Wrinkled Protein Coating Toward Peripheral Nerve Injury Repair.

Investigation on the Low‐Frequency Acoustic Performance of Polymer Matrix Composite With Metallic Hollow Spheres Under Different Acoustic Stack Structures.

Compatibilization of Post‐Consumer Recycled Polypropylene/Polyethylene Binary Blends.

Preparation and Characterization of Quick‐Setting Poly Cyanoacrylate Foams.

The Torsional Characterization of 3D‐Printed Polylactic Acid Parts With Alternating Additive Manufacturing Parameters.

Fabrication and Radiation Shielding Properties of (HDPE/Colemanite)‐(HDPE/Bi<sub>2</sub>O<sub>3</sub>) Multi‐Layer Composites.

On the Effect of Fibre Orientation and MWCNTs on the Strain‐Sensing Performance of TPU/PANI Electrospun Nanofibres.

Translation Prospects of a Novel ECM‐Silk Fibroin/Alginate 3D‐Printed Scaffold for Treatment of Full‐Thickness Skin Wounds: An In Vitro and In Vivo Study.

Adsorption Capacity Prediction and Optimization of Electrospun Nanofiber Membranes for Estrogenic Hormone Removal Using Machine Learning Algorithms.

Fabrication of Antibacterial and Flexible Hydrogels Based on Citric Acid Containing Tannic Acid for Wound Dressing.

Characterization of Biocompatible Gellan Gum Fractions for Prolonged Retention in Ocular Drug Delivery Systems.

Construction of Aligned Polycaprolactone/Poly(Glycerol Sebacate)/Polysulfone Nanofibrous Scaffolds for Tissue Engineering of the Ventricularis Layer of Heart Valves.

Preparation of a New Hydrophobic Modified Starch and Its Effect on Paper Properties.

Electrospun Polylactic Acid/Polyethylene Glycol/ Silicate‐Chlorinated Bioactive Glass Composite Scaffolds for Potential Bone Regeneration.

From Textile and Mine Waste Into Sustainable, Low‐Cost and Valuable Nanotextile Fabric‐Based Composites Through Electrospinning Technique.

Preparation and Performance Study of PEK‐C‐OH/MWCNT‐COOH/Graphite Composite Bipolar Plates for PEMFCs With Improved Interface Properties.

Robust Dual Crosslinking Ionic Network for High‐Performance Cis‐1, 4‐Polyisoprene Latex/Sodium Alginate Composites.

Proposal of a Biobased and Biodegradable Polymer as a Hot Embossing Substrate for Holographic Security Marks Fabrication.

Tragacanth Gum/Trimethyl Chitosan‐Derived Polyelectrolyte Complex as Potential Carriers in Drug Delivery Applications.

Biotoxicity Evaluation of Biodegradable Polymeric Particles: Exploring the Possible Adverse Impacts on Biological Systems.

Effect of Films on In‐Mold Decoration and Microcellular Foaming Injection Molding Parts: Cell Structure, Surface, Warpage, and Mechanical Properties.

Heat‐Treatment and Water Immersion Effect on the Mechanical Properties and Joint Strength of 3D‐Printed Polylactic Acid Parts.

Poly(Vinylidene Fluoride‐Hexafluoropropylene) Composites With Carbon Based Nanofillers for Electromagnetic Interference Shielding.

MXene—Reclaimed Cellulose Acetate Composites for Methylene Blue Removal Through Synergistic Adsorption and Photocatalysis.

An Overview of the Mechanical Behavior of Nanocomposites Considering the Interphase.

Recent Advances in Biomaterial‐Based Scaffolds for Guided Bone Tissue Engineering: Challenges and Future Directions.

Preparation of an Injectable Thermosensitive Pluronic F127/ γ‐Fe<sub>2</sub>O<sub>3</sub> Hydrogel for Combined Hyperthermia and Localized Drug Delivery for Cancer Treatment.

Preparation and Application of Molecularly Imprinted Polymers for Alkaloids: Review.

Mechanical, Thermal, and Electrical Characterization of Polyethylene Glycol and PDI‐Based Polyurethane Films for Durable Antistatic Applications.

Proposing Novel Biological Scaffolds for the Regeneration of the Dura Mater.

Formula Design of Hyperbranched Polyarylether‐Based Low Dielectric Photosensitive Resin and Study of UV‐Cured Films Properties.

Assessing the Bactericidal Effectiveness of Clove Oil Nanoemulsion‐Loaded Polycaprolactone Nanofibers for Eco‐Friendly and Endurable Food Packaging.

Issue Information.