Works matching IS 10427147 AND DT 2024 AND VI 35 AND IP 1

Results: 107

Preparation of a novel SiO2/PMMA nanocomposite with high transparency, thermal stability, and superior surface hardness via gamma‐radiation polymerization.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6290
By:
- Dong, Chunlei;
- Mao, Xuanzhi;
- Wang, Minglei;
- Zhang, Maojiang;
- Chen, Jianbing;
- Hu, Jiangtao;
- Wu, Guozhong
Publication type:
Article
Effect of the structure of macromonomer in polycarboxylate superplasticizer on viscosity and workability of concrete.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6288
By:
- Pang, Jianjun;
- Guo, Jintang;
- Li, Wenke;
- Chang, Qinglu
Publication type:
Article
Dynamical mechanical and impact strength behavior of 3D‐printing testing specimens manufactured by fused filament fabrication of isotactic polypropylene/functionalized titania nanotubes nanocomposites: Influence of β‐crystal promoting.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6294
By:
- Flores, Johann Alberto Ramírez;
- Martínez, Diego Villarreal;
- Padilla, Jose Manuel Mata;
- Armendáriz Alonso, Edgar F.;
- Camarillo, Armando Almendarez
Publication type:
Article
Biocompatible antiviral Pickering emulsion‐based formulation for plant root protection from tobamovirus‐infected soil.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6293
By:
- Mani, Karthik Ananth;
- Berenice, Meche;
- Cohen, Raz;
- Feldbaum‐Amar, Reut;
- Dombrovsky, Aviv;
- Mechrez, Guy
Publication type:
Article
Microwave‐assisted molecularly imprinted polymer synthesis for chemometric and rebinding mechanism of drug release applications.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6291
By:
- Lawai, Vannessa;
- Ngaini, Zainab;
- Farooq, Saba;
- Wahi, Rafeah;
- Bhawani, Showkat Ahmad
Publication type:
Article
Molar mass determination via linear regression from SEC measurements: The case of polylactide, polycaprolactone and poly(2,2‐dimethylthrimethylene carbonate).
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6296
By:
- Kost, Bartłomiej;
- Socka, Marta;
- Cichoń, Karolina;
- Brzeziński, Marek;
- Basko, Malgorzata;
- Biela, Tadeusz
Publication type:
Article
Fabrication of cationic microgels doped MnO2/Fe3O4 nanocomposites, and study of their photocatalytic performance and reusability in organic transformations.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6295
By:
- Singh, Vinai Kumar;
- Kumar, Krishna;
- Prasad, Tarkeshwar;
- Rai, Shailja;
- Chaudhary, Aradhna;
- Tungala, Kranthikumar;
- Das, Anupam
Publication type:
Article
Synthesis of an alkynyl‐ and allyla‐ terminated modifiers and its thermal and mechanical properties in copolymer with epoxy resin.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6289
By:
- Yuan, Zhigang;
- Sun, Mingming;
- Zhang, Xugang;
- Derradji, Mehdi;
- Zhang, Bin;
- Li, Jianhui;
- Zhao, Ming;
- Liu, Caizhao;
- Xue, Shuangle;
- Liu, Bo
Publication type:
Article
Blow molding liquid crystal aromatic polyester/polyetherimide film by rotating die: Enhanced film bubble stability and mechanical properties.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6281
By:
- Yang, Zhitao;
- Fang, Yiping;
- Zeng, Jiajing;
- Liu, Yong;
- Zhang, Zhen;
- Li, Cheng;
- Cao, Xianwu
Publication type:
Article
Development of an intuitive visualization system for measuring the melt electrowritten (MEW) jet diameter along the spinline.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6280
By:
- Zhou, Zhiguang;
- Lu, Ke;
- Wang, Haoxuan;
- Ashour, Sherry;
- Chen, Hangyue;
- Xu, Huaizhong;
- Xu, Ting
Publication type:
Article
Thermo‐mechanical performance of wolframite mineral reinforced siloxane‐modified epoxy‐based intumescent coating for structural steel.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6279
By:
- Lee, Yuan Xien;
- Ahmad, Faiz;
- Karuppanan, Saravanan;
- Sumby, Christopher;
- Shahed, Chowdhury Ahmed;
- Ramli, Siti Haslina
Publication type:
Article
Preferential formation of the stereocomplex crystals of poly(L‐lactide) and poly(D‐lactide) blend by epoxidized soybean oil under nonisothermal crystallization.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6278
By:
- Li, Wenwei;
- Srithep, Yottha;
- Shen, Jun;
- Pholharn, Dutchanee;
- Sriprateep, Keartisak;
- Worajittiphon, Patnarin;
- Khoklang, Nattamon
Publication type:
Article
The comparison of polymerization activity of typical cationic quaternary ammonium salt monomers.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6277
By:
- Ming, Anqi;
- Li, Xiaoxiao;
- Sun, Jun;
- Liu, Yanyan;
- Tian, Xingyou;
- Wang, Hua;
- Chen, Lin;
- Cao, Yuxiang;
- Yuan, Yun
Publication type:
Article
GMP/Al2O3/ZnO/PDMS thermal interface materials with anisotropic thermal conductivity and electrical insulation ability obtained by 3D‐printing method.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6287
By:
- Wang, Xu;
- Ding, Dongliang;
- Yang, Zhe;
- Zhang, Shiyu;
- Sun, Zhe;
- Liu, Zhenguo;
- Zhang, Qiuyu;
- Chen, Yanhui
Publication type:
Article
Exchangeable disulfide bond containing highly flexible epoxy vitrimers with shape‐memory, self‐healing, and UV shielding attributes.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6286
By:
- Dutta, Kalyan;
- Karak, Niranjan
Publication type:
Article
PANI/Zn‐Cu ferrite polymer composites as free‐standing high dielectric materials.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6285
By:
- Kumar, Tamilarasi;
- Paul Raj, Aji Udhaya;
- Muthukrishnan, Meena;
- Thiagamani, Senthil Muthu Kumar;
- Hashem, Mohamed;
- Mukarram, Shaikh Ayaz
Publication type:
Article
Biocompatible nanocomposite scaffolds based on carrageenan incorporating hydroxyapatite and hesperidin loaded nanoparticles for bone tissue regeneration.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6284
By:
- Taymouri, Somayeh;
- Hasani, Faezeh;
- Mirian, Mina;
- Farhang, Armin;
- Varshosaz, Jaleh
Publication type:
Article
Catalytic effect of metal ions on flame‐retardant cellulose paper with montmorillonite through layer‐by‐layer self‐assembly.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6283
By:
- Yan, Su;
- Yi, Deqi;
- Lu, Hongyu;
- Huang, Le;
- Xu, Xiaoying;
- Gao, Ming;
- Hao, Jianwei
Publication type:
Article
Sustainable polylactide/polycaprolactone based polyurethane blends fabricated via reactive compatibilization.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6282
By:
- Li, Haochen;
- Li, Rongbo;
- Zhang, Xiang;
- Xing, Qian
Publication type:
Article
Study on morphological, mechanical, thermal, barrier, rheological, and biodegradation properties of poly(butylene adipate‐co‐terephthalate)/thermoplastic starch/poly(propylene carbonate)‐g‐polyurethane biodegradable films.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6276
By:
- Wang, Zepeng;
- Tian, Hanlin;
- Yu, Jinshuo;
- Zheng, Gaofei;
- Yan, Xiangyu;
- Bian, Junjia;
- Pan, Hongwei;
- Zhang, Huiliang;
- Tan, Zhiyong
Publication type:
Article
Thermoresponsive hollow polymeric shell nano/microparticles with interconnected nanoholes.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6275
By:
- Park, Soo‐Yong;
- Jeon, Chaeyoung;
- Song, Gyeongju;
- Choi, Kyung‐Man;
- Seo, Bongkuk;
- Chung, Ildoo
Publication type:
Article
Construction of high‐toughness and self‐healing gel‐matrix/aramid fabric soft composites with high‐performance puncture resistance.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6274
By:
- Lin, Jia‐Horng;
- Han, Xiao;
- Zhang, Xia‐Yun;
- Zhang, Xue‐Fei;
- Wang, Yan‐Ting;
- Peng, Hao‐Kai;
- Liu, Li‐Yan;
- Zhang, Lu;
- Lou, Ching‐Wen;
- Shiu, Bing‐Chiuan;
- Li, Ting‐Ting
Publication type:
Article
Electromagnetic absorption shielding effectiveness and physical‐mechanical properties of rubber composites.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6273
By:
- Kruželák, Ján;
- Kvasničáková, Andrea;
- Džuganová, Michaela;
- Dosoudil, Rastislav;
- Hudec, Ivan
Publication type:
Article
Production of flower‐shaped nanobiocatalysts from green tea and investigation of their peroxidase mimicking activity on the polymerization of phenol derivatives.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6272
By:
- Kalayci, Berkant;
- Kaplan, Naime;
- Dadi, Seyma;
- Ocsoy, Ismail;
- Gokturk, Ersen
Publication type:
Article
Preparation and characterization of colorless and transparent semi‐alicyclic fluoro‐containing polyimide nanocomposite films with enhanced high‐temperature dimensional stability via incorporation of colloidal silica nanofillers.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6265
By:
- Wang, Zhenzhong;
- Yuan, Shunqi;
- Ren, Xi;
- He, Zhibin;
- Pan, Zhen;
- Yang, Changxu;
- Han, Shujun;
- Qi, Yuexin;
- Yu, Haifeng;
- Liu, Jingang
Publication type:
Article
Synthesis and polymerization of cyclic formals of oligooxyethylene diols.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6271
By:
- Kubisa, Przemysław
Publication type:
Article
Water pollution remediation: Synthesis and characterization of poly(o‐methylaniline)/ZnO/rGO composite for photocatalytic degradation of dyes.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6269
By:
- Ahmad, Mirza Nadeem;
- Anjum, Muhammad Naveed;
- Farid, Muhammad Fayyaz;
- Haq, Atta‐ul;
- Ali, Akbar;
- Rehman, Muhammad Fayyazur;
- Assiri, Mohammed A.;
- Akram, Muhammad Safwan
Publication type:
Article
Mechanical properties, surface treatments, and applications of jute fiber reinforced composites—A review.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6268
By:
- Shakir, Mufaddal Huzefa;
- Singh, Akant Kumar
Publication type:
Article
A double‐dynamic‐bond crosslinked multifunctional conductive hydrogel with self‐adhesive, remoldability, and rapid self‐healing properties for wearable sensing.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6267
By:
- Li, Xinfeng;
- Zhang, Tianyi;
- Song, Baiqing;
- Yang, Kaili;
- Hao, Xiaoqiong;
- Ma, Jianhua
Publication type:
Article
A strategy towards simultaneously improving strength and processability of polyamide 6 using bespoke dynamic covalent chain extender.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6266
By:
- Ye, Weihua;
- Yuan, Yanchao;
- Liu, Shumei;
- Zhao, Jianqing
Publication type:
Article
Soybean oil‐based nanocomposites for dye adsorption: AESO‐chitosan‐graphene oxide synergy in water treatment.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6270
By:
- Dare, Masoud Tavakoli;
- Bazmi, Maryam;
- Khosravi, Amirhosein;
- Monem, Mohammad;
- Jafari, Aliakbar;
- Khonakdar, Hossein Ali
Publication type:
Article
Robust performance for composites using silicone rubber with different prospects for wearable electronics.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6264
By:
- Kumar, Vineet;
- Alam, Md. Najib;
- Yewale, Manesh A.;
- Park, Sang‐Shin
Publication type:
Article
Engineering antibacterial shrinkage‐free trinary PLGA‐based GBR membrane for bone regeneration.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6263
By:
- Doost, Ahad Rabbani;
- Shokrolahi, Fatemeh;
- Shokrollahi, Parvin;
- Barzin, Jalal;
- Hosseini, Samaneh
Publication type:
Article
Process controlled microstructure of polyvinylidene fluoride/functionalized single walled carbon nanotube composites.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6262
By:
- Roy, Rinu Elizabeth;
- Rajeev, R. S.
Publication type:
Article
Effect of ionizing radiation on mechanical and damping properties of phenyl‐vinyl‐methyl‐polysiloxane elastomers cured with platinum.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6261
By:
- Esin, Zühra Çınar;
- Şen, Murat
Publication type:
Article
Doxorubicin/poly(caprolactone)/polyethylene glycol nanoparticles prepared by electrospray.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6260
By:
- Mehrazin, Mehdi;
- Asefnejad, Azadeh;
- Naeimi, Farid;
- Khonakdar, Hossein Ali
Publication type:
Article
Research progress and perspectives in field‐induced imprinted polymers.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6254
By:
- Xu, Wan;
- Ou, Xiaojian;
- Sun, Yuan;
- Sun, Yuanjun;
- Chen, Zhenbin;
- Yu, Xiaoqing
Publication type:
Article
Evaluation of inherent properties of the carboxymethyl cellulose (CMC) for potential application in tissue engineering focusing on bone regeneration.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6258
By:
- Mehrabi, Arezou;
- Jalise, Saeedeh Zare;
- Hivechi, Ahmad;
- Habibi, Sina;
- Kebria, Maziar Malekzadeh;
- Haramshahi, Mohammad Amin;
- Latifi, Noorahmad;
- Karimi, Afzal;
- Milan, Peiman Brouki
Publication type:
Article
Effects of iron oxide and carbon nanotube contents on mechanical properties and shape memory behavior of biocompatible and biodegradable shape memory polymers.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6257
By:
- Kim, Minseok;
- Kim, Young Bin;
- Chun, Heoung‐Jae
Publication type:
Article
Preparation of silver‐coated thermally expandable microspheres and their application in antistatic polyacrylate foam materials.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6256
By:
- Wang, Guoliang;
- Ma, Janxin;
- Zhang, Chen;
- Ma, Yuhong;
- Wang, Hui;
- Zou, Wei
Publication type:
Article
Ag/ZIF‐8/polyacrylonitrile flexible SERS substrate with high sensitivity for the surface corrosion analysis.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6255
By:
- Zhang, Yahui;
- Zhou, Sheng;
- Li, Jiyuan;
- Chen, Jiachang;
- Chen, Junying;
- Huang, Xia
Publication type:
Article
A novel epoxy adhesive with metal organic framework (MOF) and poly(butyl acrylate‐block‐styrene) for bonding aluminum–aluminum joints: A complete overview of mechanical, thermal, and morphological properties.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6259
By:
- Kowsar, Mohammad Javad;
- Moini Jazani, Omid;
- Dini, Ghasem;
- Moghadam, Majid
Publication type:
Article
Targeted theranostics agent based on polydopamine/hyaluronic acid nanoparticles for MRI and photothermal therapy.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6253
By:
- Orangi, Saeid;
- Delavari H., Hamid;
- Davaran, Soodabeh;
- Poursalehi, Reza;
- Ranjbar, Mehdi
Publication type:
Article
Multi‐dimensional stimulus response organic silicone polymer elastomer and its application.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6252
By:
- Lu, Jun‐jian;
- Yang, Zheng‐peng;
- Liu, Xin;
- Lu, Guang‐zhao
Publication type:
Article
Recent developments in stretchable and flexible tactile sensors towards piezoresistive systems: A review.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6251
By:
- Saxena, Akshay;
- Patra, Karali
Publication type:
Article
Graft‐crosslinked graphene oxide nanofiltration membrane with pH‐responsive nanochannels.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6250
By:
- Wang, Yangyang;
- Yan, Hongding;
- Ma, Mengxu;
- Zhou, Chenkai;
- Hou, Qian;
- Xu, Zehong;
- Xia, Min;
- Ni, Huagang;
- Jia, Yanrong;
- Ye, Peng
Publication type:
Article
Polyurethane coatings modified with ladder‐like polysiloxane.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6249
By:
- Lobanovskaya, Ekaterina S.;
- Mokeev, Maxim V.;
- Zuev, Vjacheslav V.
Publication type:
Article
Construction, molecular docking simulation and evaluation of electrochemical properties of polymeric nanospheres comprising novel synthesized monomer via green microemulsion polymerization.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6248
By:
- Sobh, Rokaya A.;
- Magar, Hend S.;
- Fahim, Asmaa M.;
- Hashem, M.S.
Publication type:
Article
Analysis of fabrics obtained during the archeological excavation sites in Israel.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6247
By:
- Kumar, Awanish;
- Lamberti, Yifat;
- Lewis, Rafael Y.;
- Marco, Eyal;
- Domb, Abraham J.
Publication type:
Article
Graphene nanoribbon doped PVA nanocomposites for improved UVC blocking and luminescence down‐shifting applications.
Published in:
Polymers for Advanced Technologies, 2024, v. 35, n. 1, p. 1, doi. 10.1002/pat.6246
By:
- Swamy, Ningappa Kumara;
- Mohana, Kikkeri Narasimha Shetty;
- Madhukar, Beejaganahalli Sangameshwara
Publication type:
Article