Works matching IS 10427147 AND DT 2020 AND VI 31 AND IP 12

Results: 41

Comparative study on sensing abilities of polyaniline and graphene polyaniline composite sensors toward methylamine and ammonia.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3351, doi. 10.1002/pat.5058

By:

Farooqi, Bilal Ahmad;
Ashraf, Ayesha;
Farooq, Umar;
Ayub, Khurshid

Publication type:

Article

Sulfonated poly (vinylidene fluoride‐co‐hexafluoropropylene) nanocomposite membranes with high selectivity, stability, and vanadium‐ion barrier for vanadium redox flow batteries.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3341, doi. 10.1002/pat.5057

By:

Divya, Kumar;
Rana, Dipak;
Saraswathi, Meenakshi Sundaram Sri Abirami;
Gokila, Pandian;
Nagendran, Alagumalai

Publication type:

Article

Investigating the effect of foam properties on the attenuation of coaxial cables with foamed polyethylene dielectric.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3328, doi. 10.1002/pat.5056

By:

Moradian, Milad;
Azdast, Taher;
Doniavi, Ali

Publication type:

Article

Impact on flame retardancy and degradation behavior of intumescent flame‐retardant EP composites by a hyperbranched triazine‐based charring agent.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3316, doi. 10.1002/pat.5055

By:

Liu, Yanting;
Xu, Bo;
Qian, Lijun;
Chen, Yajun;
Qiu, Yong

Publication type:

Article

Electrospun captopril‐loaded PCL‐carbon quantum dots nanocomposite scaffold: Fabrication, characterization, and in vitro studies.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3302, doi. 10.1002/pat.5054

By:

Ghorghi, Mina;
Rafienia, Mohammad;
Nasirian, Vahid;
Bitaraf, Fatemeh S.;
Gharravi, Anneh M.;
Zarrabi, Ali

Publication type:

Article

Soil structuring using interpolyelectrolyte complexes of water‐soluble polysaccharides.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3292, doi. 10.1002/pat.5053

By:

Klivenko, Alexey;
Orazzhanova, Lyazzat;
Mussabayeva, Binur;
Yelemessova, Gulnur;
Kassymova, Zhanar

Publication type:

Article

Meso research on the fiber orientation distribution of aramid fiber‐reinforced rubber composite.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3281, doi. 10.1002/pat.5052

By:

Gao, Jianhong;
Jiao, Fuxing;
Zhang, Hongjian;
Lin, Xiaoshan;
Huang, Lihong;
Guo, Jinquan;
Yang, Xiaoxiang

Publication type:

Article

Low frequency electromagnetic shielding efficiency of composites based on ethylene propylene diene monomer and multi‐walled carbon nanotubes.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3272, doi. 10.1002/pat.5051

By:

Kruželák, Ján;
Kvasničáková, Andrea;
Plavec, Roderik;
Ušák, Elemír;
Ušáková, Mariana;
Dosoudil, Rastislav;
Hudec, Ivan

Publication type:

Article

Development of modified polyacrylonitrile fibers for improving tribological performance characteristics of thermoplastic polyurethane material in water‐lubricated sliding bearings.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3258, doi. 10.1002/pat.5050

By:

Liang, Xiang;
Guo, Zhiwei;
Tian, Jun;
Yuan, Chengqing

Publication type:

Article

Viscoelastic properties and self‐healing behavior in a family of supramolecular ionic blends from silicone functional oligomers.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3247, doi. 10.1002/pat.5049

By:

Suriano, Raffaella;
Boumezgane, Oussama;
Tonelli, Claudio;
Turri, Stefano

Publication type:

Article

Nonleaching antimicrobial poly(vinyl alcohol)/polyhexamethylene guanidine hydrochloride hydrogels reinforced by hydrogen bond.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3238, doi. 10.1002/pat.5048

By:

Gong, Wuling;
Wei, Dafu;
Zhang, Shaotian;
Jiang, Yachao;
Ye, Jingyun;
Zheng, Anna;
Guan, Yong

Publication type:

Article

Development of pH‐responsive cyclodextrin nanoparticles for tumor‐specific photodynamic therapy.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3228, doi. 10.1002/pat.5047

By:

Yoon, Seonyoung;
Noh, Gwang Jin;
Youn, Yu Seok;
Oh, Kyung Taek;
Lee, Eun Seong

Publication type:

Article

Incorporation of flame retardancy in bio‐resourced mannitol based curing agent for clear pressure‐sensitive adhesive.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3211, doi. 10.1002/pat.5046

By:

Gadgeel, A. A;
Mhaske, S. T

Publication type:

Article

Construction of an efficient ternary flame retardant system for rigid polyurethane foam based on bi‐phase flame retardant effect.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3202, doi. 10.1002/pat.5045

By:

Chen, Yajun;
Li, Linshan;
Wu, Xingde

Publication type:

Article

Polycaprolactone‐based hotmelt adhesive for hernia‐mesh fixation.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3194, doi. 10.1002/pat.5044

By:

Roisman, Sabrina;
Dotan, Ana L.;
Lewitus, Dan Y.

Publication type:

Article

Sustained release of a thiosemicarbazone from antibacterial electrospun poly(lactic‐co‐glycolic acid) fiber mats.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3182, doi. 10.1002/pat.5043

By:

Barani, Hossein;
Haseloer, Alexander;
Mathur, Sanjay;
Klein, Axel

Publication type:

Article

Efficient reinforcement of wet gel by embedded polymer as newly approach for silica aerogel.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3174, doi. 10.1002/pat.5041

By:

Bananifard, Hamed;
Ashjari, Mohsen;
Niazi, Zahra;
Etemadi, Mahdi

Publication type:

Article

Preparation of block poly (phthalazinone ether ketone) with excellent thermoforming properties through precursors containing ketimines.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3161, doi. 10.1002/pat.5040

By:

Zhang, Rui;
Bao, Feng;
Wang, Jinyan;
Jian, Xigao

Publication type:

Article

Controllable synthesis of network polyacrylate from hyperbranched polyesters and their effect to bond strength of asphalt.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3150, doi. 10.1002/pat.5039

By:

Zhang, Yaowen;
Zhang, Zhiliang;
Guo, Pengfei;
Han, Fei;
Shou, Chongqi

Publication type:

Article

Electrospun PGS/PCL nanofibers: From straight to sponge and spring‐like morphology.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3134, doi. 10.1002/pat.5038

By:

Fakhrali, Aref;
Semnani, Dariush;
Salehi, Hossein;
Ghane, Mohammad

Publication type:

Article

Grafting of the hierarchical natural tannic acid and polyethyleneimine onto carbon fiber for significantly improved surface/interface properties.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3126, doi. 10.1002/pat.5037

By:

Cui, Xuejun;
Liu, Jianhui;
Ma, Lichun;
Wang, Xingong;
Zheng, Yawen;
Wang, Xiaoyun;
Wu, Guangshun

Publication type:

Article

Implementing Taguchi method to analyze electrospinning parameters influence on Mg‐doped fluorapatite nanoparticles‐poly (ε‐caprolactone) nanocomposite scaffold (Mg‐FA NPs/PCL) properties.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3114, doi. 10.1002/pat.5036

By:

Fereshteh, Zeinab;
Fathi, Mohammadhossein;
Kargozar, Saeid;
Samadikuchaksaraei, Ali

Publication type:

Article

Ethyl cyanoacrylate ordered porous films prepared via in‐situ polymerization and static breath figures process.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3104, doi. 10.1002/pat.5035

By:

Ghasemi, Seyed Morteza;
Besharati, Mahtab

Publication type:

Article

Preparation and characterization of polybenzoxazine foam with flame retardancy.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3095, doi. 10.1002/pat.5034

By:

Zhou, Xiumiao;
Li, Yuanyuan;
Li, Jingjing;
Wang, Yufei;
Liu, Chao;
Wang, Lei;
Li, Shiyang;
Song, Yangyang

Publication type:

Article

Multi‐scale modeling of three‐dimensional angle interlock woven composite subjected to ballistic impact using FEM.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3079, doi. 10.1002/pat.5033

By:

Dewangan, Mithilesh Kumar;
Panigrahi, S. K.

Publication type:

Article

The influences of different size SiO<sub>2</sub> nanoparticles on dielectric properties and corona resistance of epoxy composites.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3070, doi. 10.1002/pat.5032

By:

Zhao, Wei;
Chen, Hao;
Fan, Yong;
Cui, Weiwei

Publication type:

Article

Polymeric nanocarriers in targeted drug delivery systems: A review.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 2939, doi. 10.1002/pat.5031

By:

Abasian, Payam;
Ghanavati, Sonya;
Rahebi, Saeed;
Nouri Khorasani, Saied;
Khalili, Shahla

Publication type:

Article

Synthesis and chemical modification of crystalline nanocellulose to reinforce natural rubber composites.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3059, doi. 10.1002/pat.5030

By:

Singh, Shiva;
Dhakar, Gopal L.;
Kapgate, Bharat P.;
Maji, Pradip K.;
Verma, Chhavi;
Chhajed, Monika;
Rajkumar, Kasilingam;
Das, Chayan

Publication type:

Article

A self‐cured glass‐ionomer cement with improved antibacterial function and hardness.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3048, doi. 10.1002/pat.5029

By:

Chen, Yong;
Caneli, Gulsah;
Almousa, Rashed;
Hill, Kayla;
Na, Sungsoo;
Anderson, Gregory G.;
Xie, Dong

Publication type:

Article

Controlled release of the insect repellent picaridin from electrospun nylon‐6,6 nanofibers.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3039, doi. 10.1002/pat.5028

By:

Ryan, Justin J.;
Casalini, Riccardo;
Orlicki, Joshua A.;
Lundin, Jeffrey G.

Publication type:

Article

Preparation and evaluation of physicochemical properties of novel alkaline calcium alginate hydrogels with carbonated water.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3032, doi. 10.1002/pat.5027

By:

Teshima, Ryota;
Kawano, Yayoi;
Hanawa, Takehisa;
Kikuchi, Akihiko

Publication type:

Article

Preparation and acoustic properties of a tung oleic acid‐based polyurethane foam and its stratified structure.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3020, doi. 10.1002/pat.5026

By:

Ji, Yangjie;
Chen, Shuming

Publication type:

Article

On the banded texture and nematic elasticity in a thermotropic liquid crystalline polymer. In situ optical microscopy and light scattering.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3008, doi. 10.1002/pat.5025

By:

Romo‐Uribe, Angel

Publication type:

Article

Synthesis of core‐shell and Janus polystyrene@polypyrrole particles by variation of surfactant and monomer amount through seeded emulsion polymerization.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 2999, doi. 10.1002/pat.5024

By:

Dehghani, Elham;
Amani, Farnaz;
Salami‐Kalajahi, Mehdi

Publication type:

Article

Chemical recycling of PET: A stepping‐stone toward sustainability.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 2912, doi. 10.1002/pat.5023

By:

Shojaei, Behrouz;
Abtahi, Mojtaba;
Najafi, Mohammad

Publication type:

Article

Fabrication of nanodiamonds modified with hyaluronic acid and chlorin e6 for selective photothermal and photodynamic tumor therapy.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 2990, doi. 10.1002/pat.5022

By:

Yun, Tae Hoon;
Ahn, Guk‐Young;
Choi, Inseong;
Bae, Yeon‐Ju;
Hwang, Keum‐Cheol;
Kang, Suk‐Hoon;
Choi, Sung‐Wook

Publication type:

Article

Synthesis of ultra‐high concentration of salt‐resistant polyacrylamide.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 2980, doi. 10.1002/pat.5021

By:

Zhao, Tianhong;
Peng, Jie;
Zhang, Yiwen;
Chen, Jiawei;
Chen, Ying;
Sun, Wushan;
Li, Sijia

Publication type:

Article

Investigation on shape recovery of 3D printed honeycomb sandwich structure.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 3361, doi. 10.1002/pat.5020

By:

Mehrpouya, Mehrshad;
Gisario, Annamaria;
Azizi, Ali;
Barletta, Massimiliano

Publication type:

Article

Preparation of macroporous hybrid monoliths via iron‐based MOFs‐stabilized CO<sub>2</sub>‐in‐water HIPEs and use for β‐amylase immobilization.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 2967, doi. 10.1002/pat.5019

By:

Ma, Chao;
Wang, Jide;
Cao, Liqin

Publication type:

Article

Preparation and characterization of new expansible composite microspheres for use with water‐based drilling fluids.

Published in:

Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 2955, doi. 10.1002/pat.5018

By:

Bai, Xiaodong;
Ning, Tao;
Zhang, Xuepeng;
Xu, Yuqian;
Yong, Xuemei;
Luo, Yumei;
Zhou, Song

Publication type:

Article

Issue Information.

Published in:: Polymers for Advanced Technologies, 2020, v. 31, n. 12, p. 2907, doi. 10.1002/pat.4672
Publication type:: Article