Works matching IS 10229760 AND DT 2022 AND VI 29 AND IP 3

Results: 36

High energy density and thermal stability of polymer nanocomposites reinforced with assembled carbon and ceramic nanoparticles for energy-power application.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02963-1

By:

Uyor, Uwa O.;
Popoola, Patricia A.;
Popoola, Olawale M.

Publication type:

Article

Preparation of waterborne polyurethane based on different polyols: the effect of structure and crystallinity.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02960-4

By:

Diao, Shen;
Zhang, Yuqiang;
Zhao, Caide;
Wang, Mingying;
Yu, Jiacheng

Publication type:

Article

Esterification modification and characterization of polyvinyl alcohol anion exchange membrane for direct methanol fuel cell.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02958-y

By:

Huang, Xingyuan;
Wang, Jilin;
Wang, Lulu

Publication type:

Article

Correction to: Sustainable biocomposites produced from cotton stalk wastes: Effect of heat treatment.

Published in:

2022

By:

Gu, Shiyan;
Chang, Lanlan;
Zhang, Qingfa;
Cai, Hongzhen;
Wang, Ruji;
Sun, Jiyang

Publication type:

Correction Notice

Influence of surface modification of attapulgite (ATP) with aminosilane (3-aminopropyl) triethoxysilane for the preparation of LLDPE/ATP nanocomposites.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02953-3

By:

da Silva, Thais Ferreira;
de Souza, Gabriel Portilho Monteiro;
de Melo Morgado, Guilherme Ferreira;
Albers, Ana Paula Fonseca;
Quinteiro, Eduardo;
Passador, Fabio Roberto

Publication type:

Article

Kinetic parameters, thermal stability, biological activity, and dielectric properties of new methacrylate-based copolymers functionalized with methylparaben.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02950-6

By:

Erol, Ibrahim;
Akbıyık, Hatice

Publication type:

Article

Synthesis and thermal decomposition kinetics of tri-block copolymer ε-caprolactone / polybutadiene (PCL-PB-PCL); preparation of polyurethane network-based tri-block copolymer.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02949-z

By:

Bayat, Yadollah;
Jodar, Sahar;
Khanlari, Tayebe

Publication type:

Article

Robust polypropylene/ethylene-propylene-diene terpolymer thermoplastic vulcanizates film for green oil–water separation.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02948-0

By:

Shan, Xiu;
Huang, Ping;
Yang, Linji;
Feng, Ruotao;
Wang, Zhaobo

Publication type:

Article

Aminated magnetic polymeric resin for removal of anthraquinone and azo dyes from aqueous solutions.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02945-3

By:

Karanfil, Devlet Yeter;
Coşkun, Ramazan;
Delibaş, Ali

Publication type:

Article

In situ hydrolysis of epoxidized oleic acid by catalytic epoxidation-peracids mechanism.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02944-4

By:

Jalil, Mohd Jumain;
Azmi, Intan Suhada;
Hadi, Abdul;
Yamin, Aliff Farhan Mohd

Publication type:

Article

Enhancement of physico-chemical, optical, dielectric and antimicrobial properties of polyvinyl alcohol/carboxymethyl cellulose blend films by addition of silver doped hydroxyapatite nanoparticles.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02943-5

By:

Nasrallah, Doaa A.;
Ibrahim, Manar A.

Publication type:

Article

Surfactant-assisted interfacial polymerization for improving the performance of nanofiltration-like forward osmosis membranes.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02942-6

By:

Ang, Micah Belle Marie Yap;
Lu, Yun-Ting;
Huang, Shu-Hsien;
Millare, Jeremiah C.;
Tsai, Hui-An;
Lee, Kueir-Rarn

Publication type:

Article

Colloidal bioactive nanospheres prepared from natural biomolecules, catechin and L-lysine.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02941-7

By:

Can, Mehmet;
Sahiner, Mehtap;
Sahiner, Nurettin

Publication type:

Article

Efficacy modeling of new multi-functional benzophenone-based system for free-radical/cationic hybrid-photopolymerization using 405 nm LED.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02939-1

By:

Lin, Jui-Teng;
Lee, Yi-Ze;
Lalevee, Jacques

Publication type:

Article

Advanced internal porous skeleton supported phase change materials for thermo-electric energy conversion applications.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02938-2

By:

Yu, Chengbin;
Song, Young Seok

Publication type:

Article

Effect of graphene/graphene oxide on microstructure development and its impact on electrical conductivity and shape recovery behavior of plasticized starch-based nano-biocomposites.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02937-3

By:

Javidi, Zeinab;
Nazockdast, Hossein;
Ghasemi, Ismail

Publication type:

Article

Design and Fabrication of a Novel LDH@GO Nanohybrid Material for Its Application Potentials in Polypropylene.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02936-4

By:

Li, Lingtong;
Chen, Shaopeng;
Guo, Xincheng;
Qin, Jun;
Chen, Xiaolang;
Lu, Zongcheng;
Wu, Hong

Publication type:

Article

Comparative study of poly(acrylate-co-maleimide) copolymers and poly(α-olefins-co-maleimide) copolymers of hindered phenolic Schiff base amine for lubricant applications.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02935-5

By:

Faujdar, Ekta;
Singh, Raj K.

Publication type:

Article

Facile fabrication of metastable aluminum/fluoropolymer composite films by spin-coating and their thermal properties.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02934-6

By:

Wang, Yajun;
Wan, Yi;
Li, Shihui;
Guo, Liang

Publication type:

Article

Core–shell polymer nanocomposite based on free radical copolymerization of anthranilic acid and o-amino phenol in the presence of copper hexacyanoferrates nanoparticles and its adsorption properties.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02933-7

By:

Metwally, A. M.;
Azab, M. M.;
Mahmoud, A. A.;
Ali, H. M.;
Shaaban, A. F.

Publication type:

Article

Influence of reaction compatibilization on mechanical and barrier properties of poly(lactic acid)/ethylene–methyl acrylate-glycidyl methacrylate terpolymer films.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02932-8

By:

Yan, Xiangyu;
Jia, Shiling;
Zhang, Ye;
Han, Lijing;
Bian, Junjia;
Yang, Huili;
Pan, Hongwei;
Wu, Guangfeng;
Zhang, Huiliang

Publication type:

Article

Thermal properties and hydrophilicity of antibacterial poly(phenylene sulfide) nanocomposites reinforced with zinc oxide-doped multiwall carbon nanotubes.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02931-9

By:

Ge, Fei-Fan;
Wan, Neng;
Tsou, Chi-Hui;
Chen, Jui-Chin;
Wu, Chin-San;
De Guzman, Manuel Reyes;
Zeng, Chun-Yan;
Zhou, Li;
Wang, Yu-Ting;
Luo, Xu;
Yu, Yong-Qi

Publication type:

Article

Waste mica as filler for natural rubber latex foam composites.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02930-w

By:

Dananjaya, S. A. V.;
Somarathna, Y. R.;
Karunanayake, L.;
Siriwardena, S.

Publication type:

Article

Simulation approach for characterizing the isocyanates reactivity in polyurethane gel reactions.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02929-3

By:

Jaf, Luay;
Al-Moameri, Harith;
Ghosh, Tushar

Publication type:

Article

Recent developments of biomaterial scaffolds and regenerative approaches for craniomaxillofacial bone tissue engineering.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02928-4

By:

Gundu, Shravanya;
Varshney, Neelima;
Sahi, Ajay Kumar;
Mahto, Sanjeev Kumar

Publication type:

Article

PVDF reinforced with core–shell structured Mo@MoO3 fillers: effects of semi-conductor MoO3 interlayer on dielectric properties of composites.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02925-7

By:

Zhou, Juanjuan;
Zhou, Wenying;
Cao, Dan;
Zhang, Caihua;
Peng, Weiwei;
Yao, Tian;
Zuo, Jing;
Cai, Jiangtao;
Li, Ying

Publication type:

Article

Multistage drawing scCO2-assisted ultrahigh molecular weight polyethylene/activated nanocarbon fibers and their performance.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02918-6

By:

Xiang, Yu;
Li, Xi-hao;
Yeh, Jen-taut

Publication type:

Article

Thermal energy storage and mechanical performance of composites of rigid polyurethane foam and phase change material prepared by one-shot synthesis method.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02911-z

By:

Vatankhah, Elham;
Abasnezhad, Mohammad;
Nazerian, Morteza;
Barmar, Mohammad;
Partovinia, Ali

Publication type:

Article

Chain disentanglement in POSS/UHMWPE composites prepared via in-situ polymerization.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02909-7

By:

Zhou, Jian;
Zhang, Xian;
Zhao, Shicheng;
Ye, Chunlin;
Zhang, Zhenfei;
Xin, Zhong

Publication type:

Article

Influence of MWCNT-f as a UV protective layer in polymer composites with TGDDM/DDS for space application.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02906-w

By:

Edwards, E. R.;
Botelho, E. C.;
Braga, N. A.

Publication type:

Article

The Use of Poly(dodecyl methacrylate-co–N-isopropylacrylamide) Gel for the Separation of Limonene + Linalool Mixture.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02893-y

By:

Dilek, Aycan;
Sevgili, Lutfullah M.;
Çavuş, Selva

Publication type:

Article

Design of molecular structure for commercial polyethylene100 pipe.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-022-02888-9

By:

Wang, Ming;
Yang, Fan;
Xiang, Ming;
Yang, Feng;
Wu, Tong

Publication type:

Article

A high dielectric constant copolyamide based on high dipole density.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-021-02877-4

By:

Lv, Jiahao;
Huang, Lei;
Ning, Jingyi;
Tian, Chong;
Liu, Qiang;
Zeng, Fanhao;
Kong, Weibo;
Cai, Xufu

Publication type:

Article

Partial replacement of carbon black with graphene in natural rubber/butadiene rubber based tire compound: Investigation of critical properties.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-021-02871-w

By:

Rajan, Krishna Prasad;
Gopanna, Aravinthan;
Theravalappil, Rajesh;
Abdelghani, Emad A. M.;
Thomas, Selvin P.

Publication type:

Article

Nanomaterials for application in wound Healing: current state-of-the-art and future perspectives.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-021-02870-x

By:

Shalaby, Manal Aly;
Anwar, Mohammed Moustapha;
Saeed, Hesham

Publication type:

Article

Development of graphene oxide-based styrene/acrylic elastomeric disks from sugarcane bagasse as adsorbents of Nickel (II) ions.

Published in:

Journal of Polymer Research, 2022, v. 29, n. 3, p. 1, doi. 10.1007/s10965-021-02830-5

By:

Tohamy, Hebat-Allah S.;
El-Sakhawy, Mohamed;
Kamel, Samir

Publication type:

Article

Works matching IS 10229760 AND DT 2022 AND VI 29 AND IP 3

High energy density and thermal stability of polymer nanocomposites reinforced with assembled carbon and ceramic nanoparticles for energy-power application.

Preparation of waterborne polyurethane based on different polyols: the effect of structure and crystallinity.

Esterification modification and characterization of polyvinyl alcohol anion exchange membrane for direct methanol fuel cell.

Correction to: Sustainable biocomposites produced from cotton stalk wastes: Effect of heat treatment.

Influence of surface modification of attapulgite (ATP) with aminosilane (3-aminopropyl) triethoxysilane for the preparation of LLDPE/ATP nanocomposites.

Kinetic parameters, thermal stability, biological activity, and dielectric properties of new methacrylate-based copolymers functionalized with methylparaben.

Synthesis and thermal decomposition kinetics of tri-block copolymer ε-caprolactone / polybutadiene (PCL-PB-PCL); preparation of polyurethane network-based tri-block copolymer.

Robust polypropylene/ethylene-propylene-diene terpolymer thermoplastic vulcanizates film for green oil–water separation.

Aminated magnetic polymeric resin for removal of anthraquinone and azo dyes from aqueous solutions.

In situ hydrolysis of epoxidized oleic acid by catalytic epoxidation-peracids mechanism.

Enhancement of physico-chemical, optical, dielectric and antimicrobial properties of polyvinyl alcohol/carboxymethyl cellulose blend films by addition of silver doped hydroxyapatite nanoparticles.

Surfactant-assisted interfacial polymerization for improving the performance of nanofiltration-like forward osmosis membranes.

Colloidal bioactive nanospheres prepared from natural biomolecules, catechin and L-lysine.

Efficacy modeling of new multi-functional benzophenone-based system for free-radical/cationic hybrid-photopolymerization using 405 nm LED.

Advanced internal porous skeleton supported phase change materials for thermo-electric energy conversion applications.

Effect of graphene/graphene oxide on microstructure development and its impact on electrical conductivity and shape recovery behavior of plasticized starch-based nano-biocomposites.

Design and Fabrication of a Novel LDH@GO Nanohybrid Material for Its Application Potentials in Polypropylene.

Comparative study of poly(acrylate-co-maleimide) copolymers and poly(α-olefins-co-maleimide) copolymers of hindered phenolic Schiff base amine for lubricant applications.

Facile fabrication of metastable aluminum/fluoropolymer composite films by spin-coating and their thermal properties.

Core–shell polymer nanocomposite based on free radical copolymerization of anthranilic acid and o-amino phenol in the presence of copper hexacyanoferrates nanoparticles and its adsorption properties.

Influence of reaction compatibilization on mechanical and barrier properties of poly(lactic acid)/ethylene–methyl acrylate-glycidyl methacrylate terpolymer films.

Thermal properties and hydrophilicity of antibacterial poly(phenylene sulfide) nanocomposites reinforced with zinc oxide-doped multiwall carbon nanotubes.

Waste mica as filler for natural rubber latex foam composites.

Simulation approach for characterizing the isocyanates reactivity in polyurethane gel reactions.

Recent developments of biomaterial scaffolds and regenerative approaches for craniomaxillofacial bone tissue engineering.

PVDF reinforced with core–shell structured Mo@MoO<sub>3</sub> fillers: effects of semi-conductor MoO<sub>3</sub> interlayer on dielectric properties of composites.

Multistage drawing scCO<sub>2</sub>-assisted ultrahigh molecular weight polyethylene/activated nanocarbon fibers and their performance.

Thermal energy storage and mechanical performance of composites of rigid polyurethane foam and phase change material prepared by one-shot synthesis method.

Chain disentanglement in POSS/UHMWPE composites prepared via in-situ polymerization.

Influence of MWCNT-f as a UV protective layer in polymer composites with TGDDM/DDS for space application.

The Use of Poly(dodecyl methacrylate-co–N-isopropylacrylamide) Gel for the Separation of Limonene + Linalool Mixture.

Design of molecular structure for commercial polyethylene100 pipe.

A high dielectric constant copolyamide based on high dipole density.

Partial replacement of carbon black with graphene in natural rubber/butadiene rubber based tire compound: Investigation of critical properties.

Nanomaterials for application in wound Healing: current state-of-the-art and future perspectives.

Development of graphene oxide-based styrene/acrylic elastomeric disks from sugarcane bagasse as adsorbents of Nickel (II) ions.