Works matching IS 09544089 AND DT 2025 AND VI 239 AND IP 3

Results: 40

Rotor profile improvement by optimizing meshing curve for helical roots blowers in HFCV application.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1431, doi. 10.1177/09544089231224888

By:

Li, Dantong;
He, Zhilong;
Ma, Kai;
Sun, Chongzhou;
Xing, Ziwen

Publication type:

Article

Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1154, doi. 10.1177/09544089231223021

By:

Das, Anshuman;
Barrenkala, Dineshwar;
Das, Sudhansu Ranjan;
Patel, Saroj Kumar;
Somani, Nalin;
Kumar, Ch Sateesh

Publication type:

Article

A transfer learning-based machine learning approach to predict mechanical properties of different material types fabricated by selective laser melting process.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1400, doi. 10.1177/09544089231215683

By:

Pashmforoush, Farzad;
Seyedzavvar, Mirsadegh

Publication type:

Article

Influence of post-heat treatment with super β transus temperature on the tensile behaviour of LPBF processed Ti6Al4V.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1318, doi. 10.1177/09544089231209808

By:

Pathania, Akshay;
Anand Kumar, S;
Nagesha, BK

Publication type:

Article

Computational approach for structural and thermal behavior of laser-machined micro-grooves on alumina ceramic using ANSYS.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1388, doi. 10.1177/09544089231209314

By:

Pradhan, Subhadip;
Panda, Samir Kumar;
Panigrahi, Kalyani;
Dhupal, Debabrata

Publication type:

Article

Can pretrained networks be used in fault diagnosis of monoblock centrifugal pump?

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1306, doi. 10.1177/09544089231207476

By:

M, Arun Balaji;
S, Naveen Venkatesh;
N R, Sakthivel;
V, Sugumaran

Publication type:

Article

Improvement on the wire EDM characteristics of zirconia filled Al7050 (Al-Zn-Cu-Mg) alloy composite using Taguchi coupled TOPSIS method.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1296, doi. 10.1177/09544089231207457

By:

Ezhilan, M.;
Kailainathan, S.;
Alagarsamy, S.V.;
Deepak, D.

Publication type:

Article

Influence of welding conditions and flux composition on chemistry of welds using recycled steel slag in submerged arc welding.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1234, doi. 10.1177/09544089231207432

By:

Saini, Sumit;
Singh, Kulwant

Publication type:

Article

Effect of nanoparticles (Al2O3 and CeO2) blended with biodiesel on combustion, performance, and emissions of a diesel engine.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1378, doi. 10.1177/09544089231207426

By:

Lahane, Subhash;
Deshmukh, PW;
Sapkal, Yogesh

Publication type:

Article

Effects of peening velocity and coverage on peen forming.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1523, doi. 10.1177/09544089231207086

By:

Wu, Jizhan;
Chen, Kewen;
Zhang, Peng;
Zhu, Jiazan;
Liu, Guoqiang;
Wei, Peitang;
Liu, Huaiju

Publication type:

Article

Experimental investigation of replication accuracy of polymer-based microfluidic chip fabricated through induction-assisted hot embossing and parametric optimization through nature-inspired algorithms.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1217, doi. 10.1177/09544089231193204

By:

Deshmukh, Swarup S.;
Goswami, Arjyajyoti

Publication type:

Article

Numerical analysis and formula correction of mechanical seal ring wear of slurry pump based on thermal deformation.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1443, doi. 10.1177/09544089231191463

By:

Wei, Qiu;
Ahmat, Mutellip;
Runsheng, Yin;
He, Weilin

Publication type:

Article

A novel design method of low noise spiral bevel gear tooth surface for polynomial ease-off topological modification.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1364, doi. 10.1177/09544089231191370

By:

Chen, Peng;
Li, Bo;
Wang, San-Min

Publication type:

Article

Fabrication of structurally graded material (pure PLA/WFPC): Mechanical and microscopic aspects.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1207, doi. 10.1177/09544089231190439

By:

Veeman, Dhinakaran;
Subramaniyan, Mohan Kumar;
Vellaisamy, Murugan;
Kannan, Sanjay

Publication type:

Article

Three zone kinetic model for characteristic analysis of heat loss parameters in a downdraft gasifier.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1503, doi. 10.1177/09544089231190307

By:

Palange, Rupesh;
Krishnan, Murugesan

Publication type:

Article

Thermo-hydraulic performance of solid/porous compound wavy microchannel heat sink with various angle of slanted passage.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1195, doi. 10.1177/09544089231190306

By:

Nandy, Ajoy Kumar;
Balasubramanian, Karthik

Publication type:

Article

Experimental study on structural adhesive properties of aluminum plate and carbon fiber-reinforced polymer heterogeneous materials.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1453, doi. 10.1177/09544089231190303

By:

Bo, Liu;
Jian, Yang;
Yongxin, Tang;
Jinsheng, Zhang;
Qin, Yang;
Cong, Gao;
Gang, Feng

Publication type:

Article

A methodology for part family formation in reconfigurable manufacturing systems using Shannon's entropy method.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1281, doi. 10.1177/09544089231190297

By:

Mittal, Kamal Kumar;
Vardhan, Alok

Publication type:

Article

Investigation of mechanical and viscoelastic properties of Agave cantala fiber-reinforced green composites for structural applications.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1353, doi. 10.1177/09544089231190225

By:

Ramesh, M;
Tamil Selvan, M;
Felix Sahayaraj, A;
Jenish, I;
Balakrishnan, P;
Ravanan, Arivumani

Publication type:

Article

Investigation of physical, chemical and mechanical behaviour of nano-ZrO2-based dental composite.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1494, doi. 10.1177/09544089231190223

By:

Kumar, Shiv Ranjan;
Sharma, Hari Om;
Kumar, Sachin;
Patel, Dinesh Kumar

Publication type:

Article

Impact of variable exhaust valve timing on diesel engine characteristics fueled with waste cooking oil biofuel blends: A numerical analysis.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1329, doi. 10.1177/09544089231190221

By:

Patel, Santosh;
Torgal, Suwarna;
Purohit, Tanmay;
Kumar, Ravinder;
Singh, Dheerendra Vikram;
Kanchan, Sumit;
Soudagar, Manzoore Elahi M.;
Ahamad, Tansir;
Kalam, MA;
Patel, Mahaboob

Publication type:

Article

Thermohydraulic performance assessment of new alternative methods for anti-icing application against current application in an aircraft.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1477, doi. 10.1177/09544089231190182

By:

Pazarlıoğlu, Hayati Kadir;
Tepe, Ahmet Ümit;
Arslan, Kamil

Publication type:

Article

Design and fluid analysis of the microsegment gear tooth profile for pump operating at high speed and high pressure.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1415, doi. 10.1177/09544089231190181

By:

Huang, Kang;
Han, Guangzhi;
Xiong, Yangshou;
Cheng, Zhenbang;
Sang, Meng

Publication type:

Article

Tuning the pin configuration on cold plate for better thermal management of lithium-ion battery.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1266, doi. 10.1177/09544089231190176

By:

Kanchan, Brajesh Kumar;
Bhowmick, Debayan;
Randive, Pitambar

Publication type:

Article

Techno-environmental and economic analysis of a coal-based power plant integrated with solar field.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1255, doi. 10.1177/09544089231189666

By:

Baloda, Sunil;
Soni, Manoj Kumar;
Sharma, Naveen

Publication type:

Article

Tribo-mechanical, physical and thermal behaviour of Al/Si3N4 composite with and without the addition of Cu, Ni and Cr entropy elements.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1465, doi. 10.1177/09544089231189663

By:

Dwivedi, Shashi Prakash;
Yadav, Ashok Kumar;
Saxena, Ambuj;
Dwivedi, Vijay Kumar

Publication type:

Article

Numerical analysis of finite bearing operating under non-Newtonian lubricant and flow turbulence effect.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1245, doi. 10.1177/09544089231189652

By:

Soni, Sandeep

Publication type:

Article

Influence of doping MnCl2 in Ce, Fe and Al lattice on its oxygen storage capacity to use as a synthesis catalyst for reducing emission in IC engine.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1185, doi. 10.1177/09544089231189621

By:

Suresh, Pelluru;
Vijayaragavan, Mathanraj

Publication type:

Article

Experimental investigation of ns pulse laser processing parameters for machining of Ti-6Al-4V alloy.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1171, doi. 10.1177/09544089231189613

By:

Chandan, Guddakesh Kumar;
Sahoo, Chinmaya Kumar

Publication type:

Article

Comprehensive study of diesel engine characteristics of valves coated by titanium nitride (TiN).

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1145, doi. 10.1177/09544089231157950

By:

Sivakumar, E R;
Krishna, Ram;
Senthilkumar, P;
Krishnakumar, T S;
Colak, Ilhami

Publication type:

Article

Application of Taguchi coupled with genetic algorithm (GA) for optimizing surface quality in drilling of duplex stainless steel 2205.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1137, doi. 10.1177/09544089231151865

By:

Sharma, Rajeev;
Pahuja, Vipin;
Jha, Binit Kumar

Publication type:

Article

Effect of tantalum addition on the mechanical properties of tungsten/tantalum composite thin films.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1126, doi. 10.1177/09544089231151572

By:

Konuru, S Lakshmi Kanth;
V, Umasankar;
Sarkar, Biswanath;
Sarma, Arun

Publication type:

Article

Heat and mass transfer in thin film flow of Casson nanofluid over an unsteady stretching sheet.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1116, doi. 10.1177/09544089221150727

By:

Govindasamy, Gomathy;
Bangalore, Rushi Kumar

Publication type:

Article

Hybrid surface modification for improved tribological performance of IC engine components – a review.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1103, doi. 10.1177/09544089221150718

By:

Murari, Govind;
Nahak, Binayaka;
Pratap, Tej

Publication type:

Article

Experimental investigation of ultrasonic vibration assisted turning of Inconel 825 using TiAlN/TiAlCrN coated WC cutting tool insert.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1090, doi. 10.1177/09544089221139629

By:

Sahoo, Ananda Kumar;
Sahoo, Susanta Kumar;
Pattanayak, Suvranshu;
Moharana, Manoj Kumar

Publication type:

Article

Machinability improvement investigation in face milling of Ti–3Al–2.5V alloys using TiAlN coated carbide insert under dual nozzle minimum quantity lubrication cooling environment.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1074, doi. 10.1177/09544089221132449

By:

Tiwari, Prashant Kumar;
Raj, Samar;
Kumar, Ramanuj;
Panda, Amlana;
Sahoo, Ashok Kumar

Publication type:

Article

Influence of mechanical properties of coating and substrate on wear performance of HDLC and TiN-coated AISI 5140 alloy steel.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1063, doi. 10.1177/09544089221132434

By:

Sivakumar, E.R.;
Krishna, Ram;
Senthilkumar, P.;
Colak, Ilhami

Publication type:

Article

Tribological properties of TiSiVN coatings: The effect of the counterpart on the wear performance.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1056, doi. 10.1177/09544089221118468

By:

Fernandes, F;
AL-Rjoub, A;
Yaqub, TB;
Ferreira, F;
Serra, R;
Cavaleiro, A

Publication type:

Article

Evaluation of thermal characteristics of laser induced heating of microfilm in relation to printed circuit board manufacturing.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1042, doi. 10.1177/09544089221116165

By:

Dutta, Jaideep;
Mandal, Nabankur;
Chatterjee, Prasenjit;
Kibria, Golam

Publication type:

Article

Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 3, p. 1029, doi. 10.1177/09544089221110430

By:

Das, Anshuman;
Gautam, Apoorv;
Panda, Asutosh;
Das, Sudhansu Ranjan;
Debnath, Kishore;
Ramakrishna, Ch.;
Patel, Saroj Kumar

Publication type:

Article