Works matching IS 09544089 AND DT 2025 AND VI 239 AND IP 2

Results: 42

Crack-free hard facing options for orifice plate used in oil refinery applications.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 654, doi. 10.1177/09544089241248143

By:

Palanisamy, Chandramohan;
Vasanthan, Tamizhinian;
Mani, Selvakumar;
Thulasiram, Ramkumar

Publication type:

Article

Multi-objective optimization and experimental investigation of friction stir welding under Minimum quantity lubrication.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 993, doi. 10.1177/09544089241228697

By:

Al-Wajidi, Wisam;
Eltaggaz, Abdelkrem;
Defersha, Fantahun M.;
Deiab, Ibrahim

Publication type:

Article

Thermal and mechanical characterisation of friction stir welded dissimilar aluminium alloys.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 645, doi. 10.1177/09544089241241447

By:

Kasirajan, T;
Selva Kumar, M;
Ramkumar, T;
Mohanraj, M

Publication type:

Article

Effect of radiation and slip parameter on MHD mixed convective Casson fluid flow along a vertical stretching sheet.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 627, doi. 10.1177/09544089241239597

By:

Jat, Kavita;
Sharma, Kalpna;
Soni, Pooja;
Sinha, Sharad

Publication type:

Article

Synthesis and characterization of biodegradable seaweed-based paper battery for sustainable energy storage.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 914, doi. 10.1177/09544089231216056

By:

Dharamsi, Preeti;
Patel, Vijay;
Joshi, Unnati;
Yadav, Arvind;
Oza, Ankit D;
Prakash, Chander;
Singh, Bharat

Publication type:

Article

Effect of modification and subsequent heat treatment on thermal and mechanical properties of near-eutectic Al-Si-Fe-Mg alloys.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 678, doi. 10.1177/09544089231215226

By:

Wang, Ye;
Li, Jinlin;
Guo, Yu;
Jiang, Bo;
Hu, Maoliang;
Ji, Zesheng

Publication type:

Article

Sliding mode control of AUV trajectory tracking in the presence of disturbance.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 950, doi. 10.1177/09544089231212424

By:

Jalalnezhad, Mostafa;
Fazeli, Sadegh

Publication type:

Article

Corrosion behaviour study of Inconel 617 TIG and A-TIG weldments using potentiodynamic polarisation test and intergranular corrosion test.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 717, doi. 10.1177/09544089231210785

By:

Sakthivel, Senthil Kumaar;
Korra, Nanda Naik;
Kandasami, Devakumaran;
Kottaimathan, Ganesh Kumar

Publication type:

Article

A comparative study on weld-bead geometry of austenitic stainless-steel produced by cold metal transfer welding and pulse metal inert gas welding process.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 900, doi. 10.1177/09544089231208549

By:

Mishra, Varsha;
Yuvaraj, Narayana;
Vipin, Vipin

Publication type:

Article

Characterization of mechanical and wear properties of Prosopis juliflora thorn powder-filled epoxy nanocomposites.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 855, doi. 10.1177/09544089231208231

By:

Balakrishnan, S;
Kannan, M;
Raj Kumar, SM;
Vinukumar, K

Publication type:

Article

Impacts of Joule heating and dissipation on magnetohydrodynamic ternary-hybrid nanofluid (Al2O3-TiO2-SiO2/H2O) flow over an elongated sheet with Darcy–Forchheimer medium.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 821, doi. 10.1177/09544089231200381

By:

Madiha Takreem, Kottur;
Satya Narayana, Panyam Venkata

Publication type:

Article

Two-phase flow and wear of 90° bend pipes by normally distributed particles.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 728, doi. 10.1177/09544089231207420

By:

Li, Yi;
Xiao, Junjie;
Lin, Zhe;
Zhu, Zuchao

Publication type:

Article

Investigation of the drilling behavior of the Ti6Al4V alloy and developing prediction model using artificial neural network.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 786, doi. 10.1177/09544089231207418

By:

Yılmaz, Bahattin;
Güllü, Abdulkadir

Publication type:

Article

Multi-objective parametric optimization of electrochemical machining of Inconel-625 superalloy.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 927, doi. 10.1177/09544089231207416

By:

Singh, Pradeep Kumar;
Singh, Aswani Kumar;
Sangle, Santosh

Publication type:

Article

The effect of huntite and barite mineral-based polymer composite brake materials on friction and braking performance.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 687, doi. 10.1177/09544089231207415

By:

Yavuz, Hicri;
Bayrakçeken, Hüseyin

Publication type:

Article

Rheological behaviour of Carreau liquid past a wedge surface with binary chemical reaction.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 774, doi. 10.1177/09544089231207412

By:

Gangadhar, Kotha;
Sarma, S Venkata Krishna;
Chamkha, Ali J

Publication type:

Article

Fire hazard and risk analysis of large fuel storage tank in IOC terminal.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 696, doi. 10.1177/09544089231207419

By:

Dhurandher, Bhisham Kumar;
Khatua, Lizina;
Jiménez Macedo, Víctor Daniel;
Bhuria, Vijay;
Jatti, Vijaykumar S;
Sahu, Deepak;
Dwivedi, Gaurav

Publication type:

Article

Study of refrigeration system with minichannel condenser using R1234ze, R134a, R152a, R600a, R290 and mixture of R290/R600a (50/50).

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 616, doi. 10.1177/09544089231193923

By:

Bhatkar, Vijay W;
Sur, Anirban;
Kumar, Ramesh

Publication type:

Article

Effect of soaking time on deep cryogenic treatment of Nimonic-90 alloy.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 938, doi. 10.1177/09544089231193507

By:

Singh, Gurkirat;
Pandey, Kailash N

Publication type:

Article

Numerical simulation of liquid–solid two-phase flow and erosion of Y-type slurry valve with different openings.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 866, doi. 10.1177/09544089231193233

By:

Zhang, Guang;
Xin, Jialin;
Chen, Desheng;
Lin, Zhe

Publication type:

Article

Investigation on turning of Inconel 718 using differently coated microtextured tools.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 754, doi. 10.1177/09544089231191720

By:

Guo, Dongyun;
Wang, Dazhong;
Wu, Shujing;
Qi, Huan;
Saetang, Viboon

Publication type:

Article

Research on the calculation method of windage power loss of aviation spiral bevel gear and experiment verification.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 706, doi. 10.1177/09544089231190490

By:

Li, Linlin;
Wang, Sanmin

Publication type:

Article

Numerical modeling of dry cell alkaline electrolyzer for HHO production.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 740, doi. 10.1177/09544089231190302

By:

Abd El-Razik, S M;
Gad, M S;
Emara, Ahmed

Publication type:

Article

Measurement of EDMed surfaces roughness using convolutional neural network.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 877, doi. 10.1177/09544089231190271

By:

Kumar, Amit;
Pradhan, Mohan Kumar;
Das, Raja

Publication type:

Article

Serious ecological threat water hyacinth (Eichhornia crassipes) plant into successive hyacinth ash with eggshell filler reinforced polymer composite—waste into zero waste concept.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 765, doi. 10.1177/09544089231190241

By:

Ajithram, Arivendan;
Winowlin Jappes, Jebas Thangiah;
Rajini, Nagarajan;
Siva, Irulappasamy;
Sumesh, Keerthiveettil Ramakrishnan;
Dawood, Desai

Publication type:

Article

Electron beam welding of dissimilar Titanium to aluminium: Interface microstructure and mechanical properties.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 800, doi. 10.1177/09544089231190152

By:

Basude, Ambadas;
Kumar, Adepu;
Rajasingh, George;
Kishore, Mugada K

Publication type:

Article

A review on influence of nanoparticle parameters on viscosity of nanofluids and machining performance in minimum quantity lubrication.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 1005, doi. 10.1177/09544089231189668

By:

Hirudayanathan, Hiru P;
Debnath, Sujan;
Anwar, Mahmood;
Johar, Mahzan B;
Elumalai, Naveen K;
Mohammed Iqbal, U

Publication type:

Article

A comparative study of limit diagram of ultrasonic-assisted and conventional hot incremental forming of Ti-6AL-4V alloy.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 811, doi. 10.1177/09544089231189657

By:

Amini, Saeed;
Farzin, Mahmoud;
Mohammadi, Aminollah

Publication type:

Article

Force estimation in flow forming of Al6101 T6 stepped cylinder-experimental analysis and mathematical modelling.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 980, doi. 10.1177/09544089231189656

By:

Srivastwa, Ashutosh Kumar;
Kumar, Santosh;
Singh, Pankaj Kumar

Publication type:

Article

Investigation of machinability indicators during sustainable milling of 17-4PH stainless steel under dry and MQL environments.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 966, doi. 10.1177/09544089231189640

By:

Yurtkuran, Hakan;
Boy, Mehmet;
Günay, Mustafa

Publication type:

Article

Computational study of hydrothermal characteristics in straight microchannels with base triangular and wavy profile designs for electronic cooling.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 888, doi. 10.1177/09544089231180544

By:

Kumar, Valaparla Ranjith;
Balasubramanian, Karthik;
Kupireddi, Kiran;
Prasad, Kattela Siva

Publication type:

Article

A novel method of wind turbine bearing fault diagnosis based on gradient projection sparse reconstruction and fractional Fourier transform and improved convolutional long short-term memory.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 844, doi. 10.1177/09544089231180538

By:

Gu, Heng;
Zhang, Yan;
Xiang, Tian

Publication type:

Article

Investigation on post-weld heat treatment (PWHT) inputs for controlling average fusion zone hardness in fibre laser-welded modified 9Cr–1Mo steel.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 830, doi. 10.1177/09544089231180537

By:

Rakesh, Sivakumar;
Raghuraman, Srinivasan;
Venkatraman, Ramamoorthi

Publication type:

Article

Numerical performance investigation of a photovoltaic-thermal hybrid collector-evaporator with different tube configurations for heat pumps.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 588, doi. 10.1177/09544089231173529

By:

James, Alosh;
Sahoo, Smruti Ranjan;
Raj, Arun K;
Mohanraj, Murugesan;
Srinivas, Mokkalla;
Jayaraj, Simon

Publication type:

Article

Synthesis, characterization and optimization of gasification products from Aegle Marmelos Correa shell in a downdraft gasifier using ANN and RSM.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 601, doi. 10.1177/09544089231171030

By:

Ramaswamy, Muthu Dinesh Kumar;
Thangarasu, Vinoth;
Jaganathan, V M;
Angkayarkan Vinayakaselvi, M;
Ramanathan, Anand

Publication type:

Article

Thermal performance assessment of the coaxial pipe evacuated tube solar air heater in Bilaspur climatic conditions.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 553, doi. 10.1177/09544089231154528

By:

Jangde, Prashant Kumar;
Arjunan, T V

Publication type:

Article

Performance augmentation of a solar thermal desalination system using different floating absorber plates.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 564, doi. 10.1177/09544089231151573

By:

K., Ashish Chandran;
Raj, Arun K.;
C.S., Sujith Kumar

Publication type:

Article

Optimisation of flow and fluid properties of nanofluids to enhance the performance of solar flat plate collector using MCDM technique.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 575, doi. 10.1177/09544089221150738

By:

Ramasamy, Dharmalingam;
R, Ranjith;
T, Ramachandran;
S, Murugapoopathi;
S, Surendarnath

Publication type:

Article

Comparative strength and stability analysis of conventional and lighter composite flexible risers in ultra-deep water subsea environment.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 666, doi. 10.1177/09544089221144394

By:

Nammi, Sathish K;
Gupta, Ranjeetkumar;
Pancholi, Ketan

Publication type:

Article

An investigation on thermo-mechanical characterization of activated carbon/coconut shell powder reinforced natural composites.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 542, doi. 10.1177/09544089221132721

By:

Manikandan, R;
Suresh, G;
Abbas, S Mohamed;
Selvi, S;
Begum, S Suberiya;
Vezhavendhan, R;
Kumaresan, G

Publication type:

Article

Numerical investigation of nanoparticles dispersion on forced / mixed convective flows and heat transfer in a lid-driven stepped cavity configurations.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 517, doi. 10.1177/09544089221127617

By:

Narasimha Siva Teja, Purohitam;
Gugulothu, Santhosh Kumar;
Dinesh Sankar Reddy, Puchalapalli;
Deepanraj, Balakrishnan

Publication type:

Article

Transient isogeometric heat conduction analysis of stationary fluid in a container.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 2, p. 531, doi. 10.1177/09544089221125718

By:

Gupta, Vibhushit;
Verma, Shubham K;
Anand, Sanjeev;
Jameel, Azher;
Anand, Yatheshth

Publication type:

Article