Works matching IS 09544089 AND DT 2025 AND VI 239 AND IP 1

Results: 41

Investigation of tool wear rate during micro-electrochemical spark machining process.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 463, doi. 10.1177/09544089231176208

By:

Kumar, Nitesh;
Das, Alok Kumar

Publication type:

Article

Modeling, performance enhancement, and the NO x emission reductions of the triple-pressure reheat water-recuperated air-cooled gas turbine combined cycle power plant using interstage compressor water injection and optimization.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 376, doi. 10.1177/09544089231174108

By:

Bassily, A M

Publication type:

Article

Microstructure and mechanical properties of 7075 composites reinforced with TiO2-coated carbon nanotubes.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 129, doi. 10.1177/09544089231173755

By:

Li, Hai;
Shuai, Luming;
Tu, Kai;
Zeng, Min;
Yan, Hong

Publication type:

Article

A study on microchip cooling performance increment by using air jet impingement with one and double rows.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 445, doi. 10.1177/09544089231175204

By:

Karabulut, Koray;
Alnak, Yeliz

Publication type:

Article

Buckling analysis of rectangular plates composed of functionally graded materials subjected to uniaxial and biaxial compression loading.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 479, doi. 10.1177/09544089231216935

By:

Madjid, Berrabah Hamza;
Bouderba, Bachir

Publication type:

Article

Structural design and cavitation performance research of single-acting sliding vane pump under high rotational speed and petroleum medium.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 340, doi. 10.1177/09544089231197517

By:

Zhao, Yan;
Feng, Zi-Ming;
Sun, Deqing;
Liu, Qicheng;
Sun, Yi;
Zhang, Shuang

Publication type:

Article

Entropy generation effects with thermal radiation on MHD Casson fluid flow in porous micro-annulus.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 434, doi. 10.1177/09544089231189564

By:

Mehdi, Intizar;
Abbas, Zaheer;
Hasnain, Jafar

Publication type:

Article

Thermodynamic properties of oil droplets in oil-injected screw compressors and their influencing factors.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 394, doi. 10.1177/09544089231189559

By:

Peng, Bo;
Yan, Di

Publication type:

Article

Optimized neural network with self-adaptive MHBO algorithm for fault diagnosis.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 271, doi. 10.1177/09544089231174963

By:

Merneedi, AnjiBabu

Publication type:

Article

Effect of process parameters on performances measured in filament and pellets-based additively manufactured parts.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 489, doi. 10.1177/09544089231175207

By:

Gupta, Ashutosh Kumar;
Krishnanand;
Taufik, Mohammad

Publication type:

Article

Effects of raster angle and composition of layers on tensile and flexural properties of PLA-PLA/Al multimaterial manufactured by fused deposition modeling.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 213, doi. 10.1177/09544089231175202

By:

Mazaheri, Ali Safari;
Abedini, Vahid;
Kami, Abdolvahed

Publication type:

Article

Experimental analysis of thermal performance factor for double pipe heat exchanger with ZnO–water nanofluid.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 221, doi. 10.1177/09544089231175090

By:

Dandoutiya, Bhrant Kumar;
Kumar, Arvind

Publication type:

Article

Investigation of coated 316L steel surface employing carbon nanotubes mixed-electrical discharge machining for biomedical applications.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 348, doi. 10.1177/09544089231175058

By:

Danish, Mohd;
Al-Amin, Md;
Rubaiee, Saeed;
Parameswari, R P;
Abdul-Rani, Ahmad M;
Ahmed, Anas;
Yildirim, Mehmet B

Publication type:

Article

Prediction of higher heating values based on imminent analysis by using regression analysis and artificial neural network for bioenergy resources.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 412, doi. 10.1177/09544089231175046

By:

Singh, Pawan Kumar;
Chauhan, Sansar Singh;
Sharma, Abhishek;
Prakash, Satya;
Singh, Yashvir

Publication type:

Article

Influence of base metal temper conditions on AA6082 and AA7050 dissimilar friction stir weld properties.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 422, doi. 10.1177/09544089231175042

By:

Singh, Anugrah;
Upadhyay, Vikas

Publication type:

Article

Achieving nearly zero earing defects on cylindrical drawn cups with the zoning lubricant technique.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 62, doi. 10.1177/09544089231174297

By:

Thipprakmas, Sutasn;
Jankree, Rudeemas

Publication type:

Article

Investigation of the electrochemical behavior of titanium dioxide coating on magnesium alloy.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 366, doi. 10.1177/09544089231174123

By:

Emami Amjad, Nasim;
Khameneh Asl, Shahab;
Alipour, Mohammad

Publication type:

Article

Research on tip leakage vortex characteristics of axial-flow circulating pumps under unpowered driven conditions.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 321, doi. 10.1177/09544089231173579

By:

Jia, Xiaoqi;
Lv, Hao;
Zhang, Shuaikang;
Rao, Kun;
Zhu, Zuchao

Publication type:

Article

Mechanical and wear characteristics of spark plasma sintered titanium/multilayer graphene nanocomposites.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 330, doi. 10.1177/09544089231173523

By:

Sharma, Deepak;
Kumar, Vinod;
Singh, Sachin

Publication type:

Article

Designing vent holes for thermoforming tooling produced via fused deposition modeling.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 109, doi. 10.1177/09544089231173294

By:

Moore, Edward Z;
Baumann, Peter F

Publication type:

Article

Investigation of the effects of MQL and material hardness on energy consumption, vibration, and surface roughness in hard turning of AISI 52100 steel for a sustainable manufacturing.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 308, doi. 10.1177/09544089231173257

By:

Şahinoğlu, Abidin

Publication type:

Article

Synergistic effects of TiC/GNP strengthening on the mechanical and tribological properties of Al6061 matrix composites coupled with process optimization by artificial neural network.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 181, doi. 10.1177/09544089231172899

By:

Turkoglu, Turker;
Celik, Sare

Publication type:

Article

Development of numerical scheme using boundary element method for heat conduction problems.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 301, doi. 10.1177/09544089231172615

By:

Asghar, Ali;
Ahmad, Muhammad O;
Bashir, Muhammad N;
Ramzan, Muhammad;
Bashir, Muhammad Aun;
Shehzad, Sabir Ali

Publication type:

Article

Fuzzy proportional–integral–derivative control system of electric drive downhole cutting tool based on genetic algorithm.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 291, doi. 10.1177/09544089231172608

By:

Zhu, Xiaohua;
Zhong, Jiahang;
Jing, Jun;
Ye, Wenyong;
Zhou, Bowen;
Shan, Hongbin

Publication type:

Article

Pressure drop of turbulent flow across pipe bends.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 194, doi. 10.1177/09544089231172593

By:

Al-Tameemi, Wameedh TM;
Kader, Ekhlas Edan

Publication type:

Article

Changes in the mode of transportation using active magnetic technology for non-standard equipment.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 258, doi. 10.1177/09544089231172328

By:

Zhang, Hongsheng;
Li, Yanbin;
Guo, Kai

Publication type:

Article

Investigation of microstructural, hardness, and thermal properties of mechanically milled Al-Co-Cu-Mg alloys.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 202, doi. 10.1177/09544089231172291

By:

Okumuş, Mustafa;
Demir, Mehmet Emin;
Dal, Ahmet

Publication type:

Article

Soret and Dufour effects on the magnetohydrodynamic free convective flow of Maxwell nanofluid past an infinite stretching sheet.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 151, doi. 10.1177/09544089231172163

By:

Harikrushna, M;
Prabhakara Rao, G;
Veera Krishna, M

Publication type:

Article

Detection and evaluation of load oscillations in induction motors based on MCSA.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 244, doi. 10.1177/09544089231172029

By:

Han, Yuejiang;
Yuan, Jianping;
Luo, Yin;
Zou, Jiamin;
Qin, Xuecong

Publication type:

Article

Microstructure, mechanical and magnetic properties of a nickel-free austenitic stainless steel fabricated by hot powder forging.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 231, doi. 10.1177/09544089231172018

By:

Tangestani, Amir;
Hadianfard, Mohammad Jafar;
Vashaee, Daryoosh

Publication type:

Article

Modeling of physicochemical and thermophysical characteristics of SrO-CaO-Al2O3-CaF2-based shielded metal arc welding coating.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 167, doi. 10.1177/09544089231172017

By:

Gupta, Alok;
Singh, Jaiveer;
Chhibber, Rahul

Publication type:

Article

Performance of single slope solar still with various operation parameters—An experimental, statistical, and CFD simulation approach toward optimality.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 158, doi. 10.1177/09544089231172015

By:

Prasad, Rakesh;
Singh, Yashvir;
Sharma, Anuj Kumar;
Sahu, Rohit;
Dwivedi, Vijay Kumar;
Kumar, Sanjeev

Publication type:

Article

Fabrication of through-holes of different shapes using foil tool in EDM: Process development and analysis.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 140, doi. 10.1177/09544089231171467

By:

Padhi, Bibeka Nanda;
Choudhury, Sounak Kumar;
Janakarajan, Ramkumar

Publication type:

Article

Surface integrity evaluation in ecological nanofluids assisted grinding of Inconel 718 superalloy.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 75, doi. 10.1177/09544089231171042

By:

Sinha, Manoj Kumar;
Kishore, Kamal;
Sharma, Pankaj

Publication type:

Article

Magnetohydrodynamic flow of Carreau Yasuda fluid inside a complex wavy passage formed by beating cilia: A finite-difference analysis.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 87, doi. 10.1177/09544089231171037

By:

Asghar, Zeeshan;
Khan, Muhammad Waris Saeed;
Gondal, Muhammad Asif;
Ghaffari, Abuzar

Publication type:

Article

Relative analysis on fluid flow models for graphene oxide suspended blood flow: A Keller-box approach.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 99, doi. 10.1177/09544089231171036

By:

Rathore, Niraj;
Sandeep, N.

Publication type:

Article

Parametric optimization and ranking analysis of basalt fiber–marble dust particulates–polyamide 66 polymer composites under dry sliding wear investigation.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 40, doi. 10.1177/09544089231170999

By:

Sharma, Ravi Prakash;
Sharma, Ankit;
Jeganmohan, Sudhanraj;
Kumar, Mukesh;
Kumar, Ashiwani

Publication type:

Article

Evaluation of microstructural, tribological and tensile characteristics of AA7075 surface composites fabricated through friction stir process.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 27, doi. 10.1177/09544089231170987

By:

Suganeswaran, K.;
Muthukumar, P.;
Sathiskumar, R.;
Parameshwaran, R.;
Nithyavathy, N.

Publication type:

Article

An empirical study of CMT-welded interface features and corrosion characteristics of dissimilar joints.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 118, doi. 10.1177/09544089231170986

By:

Selvamani, S.T.;
Bakkiyaraj, M.;
Yoganandan, G.;
N, Dilip Raja

Publication type:

Article

Investigation on the effects of powder mixing method on mechanical properties and wear resistance of Al/graphene composites.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 16, doi. 10.1177/09544089231170984

By:

Rashidi, Kambiz;
Moazami-Goudarzi, Mohammad;
Masoudi, Afshin

Publication type:

Article

A study on the metallurgical characterisation of the longitudinally sampled friction stir processed TIG welded dissimilar aluminum joints.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2025, v. 239, n. 1, p. 5, doi. 10.1177/09544089231169589

By:

Mabuwa, Sipokazi;
Msomi, Velaphi;
Mehdi, Husain;
Ngonda, Tiyamike

Publication type:

Article