Works matching IS 09544089 AND DT 2024 AND VI 238 AND IP 6

Results: 41

Experimental investigation of micro-machining on borosilicate glass using mist flow aided WECDM.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2782, doi. 10.1177/09544089231189469

By:

Singh, Sitanshu;
Singh, Sarbjit;
Chaudhary, Neeru;
Grover, Sahil;
Yadav, Vikas

Publication type:

Article

A new approach for determining optimum number of cell, cell formation and intra-machine cell layout with considering operation sequence.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2770, doi. 10.1177/09544089231194422

By:

Raja, Shanmuganantham;
Vignesh, Krishnan

Publication type:

Article

Innovative methods in the construction of digital twin factory.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2633, doi. 10.1177/09544089241267144

By:

Liu, Dongmei;
Tarelnyk, Viacheslav

Publication type:

Article

Recent research progress on various cooling and lubrication techniques used in sustainable hard machining: A comprehensive review.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 3009, doi. 10.1177/09544089231169655

By:

Khatai, Saswat;
Sahoo, Ashok Kumar;
Kumar, Ramanuj;
Panda, Amlana

Publication type:

Article

Formulation and selection of composite biomaterials for acetabular cup of hip prosthesis with wear analysis.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2983, doi. 10.1177/09544089231169648

By:

Das, Shankar Swarup;
Chakraborti, Prasun

Publication type:

Article

Surface pre-reacted glass reinforced dental composite: Performance assessment of physicochemical, static mechanical, dynamic mechanical and wear properties.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2973, doi. 10.1177/09544089231169646

By:

Kumar, Shiv Ranjan;
Sharma, Ajay

Publication type:

Article

Effects of incident angle of sealing ring clearance on internal flow and cavitation of centrifugal pump.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2867, doi. 10.1177/09544089231169617

By:

Jia, XiaoQi;
Yu, YiFan;
Li, Bo;
Wang, FeiCan;
Zhu, ZuChao

Publication type:

Article

Influence of processing parameters on joint characterization of SS 304 using microwave hybrid heating.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2964, doi. 10.1177/09544089231169586

By:

Gautam, Uma;
Vipin

Publication type:

Article

A short review on SLM-processed Ti6Al4V composites.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 3054, doi. 10.1177/09544089231169380

By:

Kathiresan, M;
Karthikeyan, M;
Immanuel, R Jose

Publication type:

Article

Mechanical performance and microscopic characterization of additively manufactured functionally graded material (WPC/Ceramic-PLA) via fused deposition modelling.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2642, doi. 10.1177/09544089231166497

By:

Subramaniyan, Mohan Kumar;
Veeman, Dhinakaran;
Gurusamy John Kennedy, Surendhar;
Panda, Biranchi;
Yang, Chunhui

Publication type:

Article

Effect of valve plug shapes on vortex-induced vibration characteristics through a multistage pressure-reducing valve.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2908, doi. 10.1177/09544089231168222

By:

Xu, Dongtao;
Ge, Changrong;
Liu, Jingqiang;
Zhu, Chengzhi

Publication type:

Article

Synthesis and characterisation of magnesium-based nano-composite – A review.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2994, doi. 10.1177/09544089231167758

By:

Mitra, Anirban;
Mandal, Suman Kumar;
Rai, Ram Naresh

Publication type:

Article

Fabrication of bio-fiber based Eichhornia crassipes /Al2O3 particles hybrid biocomposites and investigation of important properties.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2941, doi. 10.1177/09544089231167750

By:

Herlina Sari, Nasmi;
Suteja;
Sujita;
Ilyas, Rushdan Ahmad;
Sari, Eka;
Sanjay, Mavinkere Rangappa;
Siengchin, Suchart

Publication type:

Article

Surface topography of cylindrical precision grinding based on multi-source information fusion.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2894, doi. 10.1177/09544089231166657

By:

Hu, Lai;
Zhang, Hua;
Zha, Jun;
Chen, Yaolong

Publication type:

Article

Effect of process parameters on surface roughness of NiCu alloy in fluid jet polishing.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2883, doi. 10.1177/09544089231166651

By:

Choudhary, Shubham;
Duvedi, Ravinder Kumar;
Saini, Jaswinder Singh

Publication type:

Article

Intelligent assessment of quality characteristics of miscanthus fiber-reinforced polypropylene for sustainable products development.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2950, doi. 10.1177/09544089231167761

By:

Ihueze, Chukwutoo Christopher;
Celestine, Okoli Ndubuisi;
Onwurah, Uchendu Onwusoronye;
Okafor, Christian Emeka;
Kingsley-Omoyibo, Queeneth Adesuwa

Publication type:

Article

Casing failure mechanism and slip anchoring optimization of the compression packer in the oil and gas well.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2759, doi. 10.1177/09544089231165128

By:

Tang, Yang;
Wang, Jie;
Zhou, Minghai;
Li, Guangyao;
Xiao, Xiao

Publication type:

Article

A nature-inspired optimal design for a ventilated brake disc.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2587, doi. 10.1177/09544089221116166

By:

Shinde, Dinesh;
Öktem, Hasan;
Uygur, Ilyas

Publication type:

Article

Analyzing the geometrical errors of silicon nitride-titanium nitride on performing electric discharge machining using response surface methodology.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2917, doi. 10.1177/09544089231166303

By:

Lakshmanan, Selvarajan;
Rajendran, Rajavel;
Shanmugakani, Senthil Kumar;
Krishnamoorthy, Venkataramanan

Publication type:

Article

Investigations on nonlinear processes of a Gifford-McMahon type orifice pulse tube refrigerator.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2797, doi. 10.1177/09544089231165942

By:

Panda, Debashis;
Kumar, Manoj;
Satapathy, Ashok K;
Sarangi, S K;
Behera, Upendra

Publication type:

Article

Identifying and prioritizing the factors to determine best insulation material using Bayesian best worst method.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2561, doi. 10.1177/09544089221111586

By:

Ayyildiz, Ertugrul;
Erdogan, Melike

Publication type:

Article

A novel comparative model proposal for hospital pneumatic systems.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2577, doi. 10.1177/09544089221110432

By:

Takgil, Büşra;
Kara, Resul

Publication type:

Article

Observable responses of micro-cantilever array to dynamic acoustic forces at higher mode in the broadband frequency window.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2568, doi. 10.1177/09544089221111753

By:

Yilmaz, Cagri;
Sahin, Ramazan;
Topal, Eyup Sabri

Publication type:

Article

Understanding the slurry erosion behaviour of iron-based chromium carbide coating material during deposition via arc spray coating method.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2854, doi. 10.1177/09544089231164841

By:

Demirsöz, Recep;
Singla, Anil Kumar;
Uğur, Abdullah;
Erdoğdu, Ahmet Emrah;
Korkmaz, Mehmet Erdi;
Gupta, Munish Kumar;
Królczyk, Jolanta Beata;
Ross, Nimel Sworna

Publication type:

Article

Multi-objective parametric optimization of AWJM process using Taguchi-based GRA and DEAR methodology.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2845, doi. 10.1177/09544089231164836

By:

Pathapalli, Venkateshwar Reddy;
Pittam, Srinivasa Rao;
Sarila, Venukumar;
Burragalla, Dhanraj;
Gagandeep, Arora

Publication type:

Article

Energetic and exergetic performance investigation of a cross-flow regenerative indirect evaporative cooler made up of aluminium plate heat exchangers.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2821, doi. 10.1177/09544089231164830

By:

Inanli, Mert;
Aydin, Devrim;
Rezaei, Marzieh

Publication type:

Article

Study on pressure pulsations and transient fluid forces in centrifugal pump under different degrees of cavitation.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2834, doi. 10.1177/09544089231164832

By:

Jia, XiaoQi;
Yang, XiaoQiang;
Zhu, ZuChao

Publication type:

Article

Fault-related feature discrimination network for cell partitioning and defect classification in real-time solar panel manufacturing.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2809, doi. 10.1177/09544089231164829

By:

Rajeshkanna, R.;
Meikandan, M.;
Daxayani, C.;
Ganesh Kumar, P.

Publication type:

Article

A novel approach to develop and characterize bi-directional aluminum-copper functionally graded material.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2750, doi. 10.1177/09544089231163746

By:

Boggarapu, Vasavi;
RamaSreekanth, PS;
Peddakondigalla, Venkateswara Babu;
Mallampati, Somaiah Chowdary;
Kanakam, Rakesh;
Ojha, Shakuntla;
Gujjala, Jayachandra;
Valasingam, Suresh Babu;
Gujjala, Raghavendra

Publication type:

Article

Multi-response optimization on abrasive water jet machining of Aluminum 7075 alloy using Taguchi–DEAR methodology.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2691, doi. 10.1177/09544089231163724

By:

Shanmugam, Ayyagounder;
Mohanraj, Thangamuthu;
Krishnamurthy, Kasilingam;
Gur, Ali Kaya;
Caligulu, Ugur

Publication type:

Article

Experimental validation of the screw compressor oil drag model for various rotor profiles.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2740, doi. 10.1177/09544089231163514

By:

Abdan, Suraj;
Patil, Sumit;
Stosic, Nikola;
Kovacevic, Ahmed;
Smith, Ian

Publication type:

Article

Multi-performance optimization of the diamond burnishing process in terms of energy saving and tribological factors.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2714, doi. 10.1177/09544089231163407

By:

Nguyen, Trung-Thanh;
Nguyen, Truong-An;
Dang, Xuan-Ba;
Van, An-Le

Publication type:

Article

Fault diagnosis of reciprocating compressor based on the prediction of comprehensive index extracted from the expansion process in indicator diagram.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2681, doi. 10.1177/09544089231163377

By:

Wu, Weifeng;
Li, Chengyi;
Zhang, Jing;
Zhang, Yin;
Li, Xiaoran;
Yang, Yifan;
Zhu, Zhongqing;
Wang, Bingsheng

Publication type:

Article

Forced convection heat transfer of concurrent Al2O3/PCM nanofluid flows in a concentric double tube.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2700, doi. 10.1177/09544089231163371

By:

Ho, C J;
Huang, S H;
Lai, Chi-Ming

Publication type:

Article

Comparative study of microwave and thermal curing processes in terms of temperature characteristics and mechanical performance of carbon fibre composites.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2728, doi. 10.1177/09544089231162778

By:

Kumar, Rajeev;
Zafar, Sunny

Publication type:

Article

Role of suction/injection with magnetic dipole and double diffusion on nonlinear radiative Eyring–Powell nanofluid.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2652, doi. 10.1177/09544089231162715

By:

Jabeen, Kanwal;
Mushtaq, Muhammad;
Naeem, Sahar

Publication type:

Article

Effect of alkali treatment on cotton/bamboo fibres for application as a reinforcement material.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2670, doi. 10.1177/09544089231162292

By:

Karthik, A;
Daniel James D, Jafrey;
Sampath, PS;
Thirumurugan, V

Publication type:

Article

Investigation of the effects of deep cryogenic treatment on the structural and mechanic properties of polyoxymethylene copolymer (POM-C) materials.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2623, doi. 10.1177/09544089221139647

By:

Altinsoy, Alirıza;
Arslan, Yusuf

Publication type:

Article

Increasing the efficiency of perovskite solar cells using Cs4CuSb2Cl12 quantum dots as an interface layer: A numerical study.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2608, doi. 10.1177/09544089221134394

By:

Çadirci, Musa;
Bakay, Melahat Sevgül

Publication type:

Article

Investigation of power generation from river surface runoff with a novel tilted axis hydrokinetic turbine for off-grid sites.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2615, doi. 10.1177/09544089221132439

By:

Gökgedik, Harun;
Özgür, Arif Emre;
Gürbüz, Emine Yağız;
Keçebaş, Ali

Publication type:

Article

Determination of epoxy resin usability for mass production of reinforced laminated veneer lumber.

Published in:

Proceedings of the Institution of Mechanical Engineers: Part E: Journal of Process Mechanical Engineering (Sage Publications, Ltd.), 2024, v. 238, n. 6, p. 2599, doi. 10.1177/09544089221118217

By:

Çiftçi, Seymen;
Ciritcioglu, Hasan Hüseyin;
As, Nusret;
Tankut, Nurgül

Publication type:

Article