Works matching IS 03549836 AND DT 2023 AND VI 27 AND IP 4B

Results: 44

IMPROVEMENT OF THE PERFORMANCE OF SMALL-SIZED CAVITATING VENTURIS BY INSERTING OBSTACLES.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3467, doi. 10.2298/TSCI2304467R

By:

ROSTANE, Brahim;
ALIANE, Khaled;
BRAYYICH, Mohammed;
ZEARAH, Sajad A.;
AKGUL, Ali;
ABDULLAEVA, Barno;
MENNI, Younes;
ALSHARARI, Abdulrhman M.;
ASAD, Jihad

Publication type:

Article

IMPORTANT NOTE.

Published in:

2023

By:

Bakić, Vukman

Publication type:

Correction Notice

ENHANCING THERMAL COMFORT IN BUILDINGS Innovations in Sustainable Cooling and Heating Systems Utilizing Geothermal Energy.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3477, doi. 10.2298/TSCI2304477K

By:

KAID, Noureddine;
BAYRAM, Mustafa;
OSRA, Oumr Adnan;
ALMUTERY, Sultan Bader;
HASSAN, Ahmed R.;
MENNI, Younes

Publication type:

Article

NUMERICAL STUDY ON A NATURAL GAS-FUELED ENGINE UNDER LOW TEMPERATURE COMBUSTION MODE.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3457, doi. 10.2298/TSCI2304457K

By:

KEZRANE, Cheikh;
NAIMA, Khatir;
ALSHARARI, Abdulrhman M.;
Al-HAMEED, Mazin Riyadh;
ZEARAH, Sajad A.;
AKGUL, Ali;
ABDULLAEVA, Barno;
MENNI, Younes;
ASAD, Jihad

Publication type:

Article

EXPERIMENTAL INVESTIGATION OF COOLING PERFORMANCE IN ELECTRONIC INSTRUMENTS.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3445, doi. 10.2298/TSCI2304445B

By:

BENSAFI, Mohammed;
KAID, Noureddine;
SHNAWA, Ammar H.;
ALSHARARI, Abdulrhman M.;
MOHSEN, Karrar S.;
AKGUL, Ali;
ABDULLAEVA, Barno;
MENNI, Younes;
SHANAK, Hussein

Publication type:

Article

ARTIFICIAL NEURAL NETWORK BASED PREDICTION OF ENGINE-OUT RESPONSES FROM A BIODIESEL FUELLED COMPRESSION IGNITION ENGINE.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3433, doi. 10.2298/TSCI2304433K

By:

KEZRANE, Cheikh;
HABIB, S. Houcine;
BAYRAM, Mustafa;
ALQAHTANI, Sultan;
ALSHEHERY, Sultan;
IKUMAPAYI, Omolayo M.;
AKINLABI, Esther T.;
AKINLABI, Stephen A.;
LOUBAR, Khaled;
MENNI, Younes

Publication type:

Article

OPTIMIZATION OF THERMAL COMFORT IN BUILDINGS VIA ANALYSIS OF A TROMBE WALL FOR ENHANCED ENERGY EFFICIENCY.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3423, doi. 10.2298/TSCI2304423B

By:

BENSAFI, Mohammed;
BAYRAM, Mustafa;
OSRA, Oumr Adnan;
ALMUTERY, Sultan Bader;
MENNI, Younes

Publication type:

Article

ARTIFICIAL NEURAL NETWORK ASSISTED MULTI-OBJECTIVE OPTIMIZATION OF A METHANE-FED DIR-SOFC SYSTEM WITH WASTE HEAT RECOVERY.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3413, doi. 10.2298/TSCI2304413A

By:

AYBEK, Unsal;
NAMLI, Lutfu;
OZBEY, Mustafa;
DOGAN, Bekir

Publication type:

Article

NUMERICAL SIMULATION OF SLIP BEHAVIORS AND FRICTION REDUCTION EFFECTS IN HYDROPHOBIC MICRO-CHANNEL IN LAMINAR FLOW CONDITIONS.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3405, doi. 10.2298/TSCI2304405D

By:

DOGAN, Bekir;
OZBEY, Mustafa;
NAMLI, Lutfu;
AYBEK, Unsal

Publication type:

Article

RIEMANNIAN SUBMERSIONS ENDOWED WITH A NEW TYPE OF SEMI-SYMMETRIC NON-METRIC CONNECTION.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3393, doi. 10.2298/TSCI2304393K

By:

KARATAS, Esra;
ZEREN, Semra;
ALTIN, Mustafa

Publication type:

Article

ON THE SOLUTION OF LAKE POLLUTION MODEL BY Sinc COLLOCATION METHOD.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3385, doi. 10.2298/TSCI2304385Y

By:

YELOGLU, Turgut

Publication type:

Article

EFFECTIVE UTILIZATION OF SOLAR ENERGY IN SUSTAINABLE AGRICULTURAL IRRIGATION A Provincial Example from Turkiye.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3373, doi. 10.2298/TSCI2304373B

By:

BINGOL, Ali;
ARSLAN, Omer

Publication type:

Article

EFFECTS OF SIX SIGMA IMPLEMENTATION ON OCCUPATIONAL HEALTH AND SAFETY IN INDUSTRIAL DIESEL ENGINE PRODUCTION AND MAINTENANCE PROCESSES.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3361, doi. 10.2298/tsci2304361s

By:

SIMSEK, Suleyman;
TURHAN, Semih

Publication type:

Article

NINE-PARAMETER PATH SYNTHESIS OF PLANAR FOUR-BAR MECHANISM WITH THE AID OF THE GENERAL EQUATION OF COUPLER CURVE.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3349, doi. 10.2298/TSCI2304349M

By:

MUTLU, Huseyin

Publication type:

Article

SIMULATION OF NEWLY DESIGNED VORTEX GENERATORS FOR OPTIMIZING FLUID MIXING EFFICIENCY IN COMPACT STATIC MIXERS WITH SINGLE-EXIT CONFIGURATION.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3337, doi. 10.2298/TSCI2304337K

By:

KAID, Noureddine;
BAYRAM, Mustafa;
ASAD, Jihad;
ATIF, Muhammad;
ALHASSAN, Muataz S.;
AMEUR, Houari;
AHMAD, Hijaz;
MENNI, Younes

Publication type:

Article

DESIGN AND ANALYSIS OF VIBRATORY SCREEN FOR PEANUTS.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3323, doi. 10.2298/TSCI2304323K

By:

KAYGUSUZ, Emre

Publication type:

Article

EXPERIMENTAL INVESTIGATION OF LEVEL INDICATOR ERRORS CAUSED BY TURBULENCE IN VEHICLE FUEL TANKS.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3209, doi. 10.2298/TSCI2304209B

By:

BELLI, Buse;
ATALAY, Oner

Publication type:

Article

WATER QUALITY ASSESSMENT FOR IRRIGATION CANALS Case Study in the Bingol, Turkey.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3299, doi. 10.2298/TSCI2304299E

By:

E. R., Hasan;
SEVIK, Fevzi

Publication type:

Article

MECHANICAL PROPERTIES RESEARCH OF CARBON FIBRE COMPOSITES INCORPORATING NANOCLAY AND GRAPHENE.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3291, doi. 10.2298/tsci2304291o

By:

ONGUN, Alemdar

Publication type:

Article

THE 3-D OPTIMIZATION OF AN AXIAL MIXER PROPELLER THROUGH HIGH FIDELITY SIMULATIONS.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3281, doi. 10.2298/TSCI2304281K

By:

KOZAKA, Engin Orcun;
DEMIRCIOGLU, Pinar;
BOGREKCI, Ismail;
ORNEK, Tarcan;
KOSE, Utku

Publication type:

Article

ENHANCING FLOW STRUCTURE IN HEAT EXCHANGERS Analysis of Dynamic and Thermal Air-Flow Behavior with Perforated and Inclined Baffles.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3269, doi. 10.2298/TSCI2304269A

By:

ALQAHTANI, Sultan;
ALSHEHERY, Sultan;
BAYRAM, Mustafa;
IKUMAPAYI, Omolayo M.;
AKINLABI, Esther T.;
AKINLABI, Stephen A.;
MENNI, Younes

Publication type:

Article

THE EFFECT OF USING ACTIVATED CARBON OBTAINED FROM SEWAGE SLUDGE AS A FUEL ADDITIVE ON ENGINE PERFORMANCE AND EMISSIONS.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3313, doi. 10.2298/TSCI2304313B

By:

BILGIN, Serhat;
ONAL, Yunus;
AKANSU, Selahaddin Orhan;
ILHAK, Mehmet Ilhan

Publication type:

Article

INVESTIGATION OF THE EFFECT OF PRE-DEFORMATION SHAPE ON COLD FORMING PROPERTIES IN THE PRODUCT MATERIAL IN FASTENER PRODUCTION.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3261, doi. 10.2298/TSCI2304261M

By:

MERMER, Murat;
OVALI, Ismail

Publication type:

Article

STATISTICAL ASSESSMENT OF NATURAL FREQUENCY VALUES OBTAINED FROM NUMERICAL ANALYSES IN THE TAPERED COMPOSITE LAMINATED BEAMS.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3241, doi. 10.2298/TSCI2304241O

By:

OVALI, Ismail

Publication type:

Article

COMPARISON OF SIDE COLLISION ANALYZES OF ELECTRIC VEHICLE AND CONVENTIONAL VEHICLE CHASSIS.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3229, doi. 10.2298/TSCI2304229C

By:

CIMENDAG, Muhammed;
ULU, Eylem YILMAZ

Publication type:

Article

THE SnO2 NANOTUBE WITH CNT CORE STRUCTURE (SnO2@VOID@CNT) AND GRAPHENE COMPOSITE ELECTRODE FOR LI-ION BATTERIES.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3217, doi. 10.2298/TSCI2304217A

By:

ALAF, Mirac

Publication type:

Article

THERMAL EFFECT OF QUENCH RATE ON MECHANICAL PROPERTIES OF SIMA 7075-T6.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3199, doi. 10.2298/TSCI2304199G

By:

GUNER, Ali Tekin;
DISPINAR, Derya;
TAN, Engin

Publication type:

Article

ENHANCING THERMAL PERFORMANCE AND SUSTAINABILITY Parabolic trough Concentrator Systems in Djelfa's Solar-Integrated Urban Design.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3251, doi. 10.2298/TSCI2304251T

By:

TLILI, Salah;
KADDOUR, Abdelmadjid;
OSRA, Oumr A.;
BAYRAM, Mustafa;
ATIF, Muhammad;
AHMAD, Hijaz;
MENNI, Younes

Publication type:

Article

EXPERIMENTAL INVESTIGATION OF THE EFFECT OF THE USE OF NANOPARTICLE ADDITIONAL BIODIESEL ON FUEL CONSUMPTION AND EXHAUST EMISSIONS IN TRACTOR USING A COATED ENGINE.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3189, doi. 10.2298/TSCI2304189O

By:

OZER, Salih;
HACIYUSUFOGLU, Fatih;
VURAL, Erdinc

Publication type:

Article

EFFECT OF VARIATION OF EGG-SHELL PARTICULATE REINFORCEMENT ON ULTRASONIC PULSE VELOCITY, ATTENUATION, AND HARDNESS PREDICTION IN CERAMIC-METAL COMPOSITES.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3179, doi. 10.2298/TSCI2304179B

By:

BILICI, Vildan Ozkan;
PESMEN, Gunnur;
YONETKEN, Ahmet;
EROL, Ayhan

Publication type:

Article

COMPARISON OF THE EFFICIENCY OF WIND POWER PLANTS FROM RENEWABLE ENERGY TYPES TO REDUCE ATMOSPHERE POLLUTION IN MARMARA REGION.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3171, doi. 10.2298/TSCI2304171S

By:

SIMSEK, Suleyman;
DOGAN, Funda

Publication type:

Article

NON-POLYNOMIAL CUBIC SPLINE METHOD USED TO FATHOM SINE GORDON EQUATIONS IN 3+1 DIMENSIONS.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3155, doi. 10.2298/TSCI2304155S

By:

SATTAR, Rabia;
AHMAD, Muhammad Ozair;
PERVAIZ, Anjum;
AHMED, Nauman;
AKGUL, Ali;
ABDULLAEV, Sherzod;
ALSHAIKH, Noorhan;
WANNAN, Rania;
ASAD, Jihad

Publication type:

Article

OPTIMIZING SOLAR WATER HEATER PERFORMANCE THROUGH A NUMERICAL STUDY OF ZIG-ZAG SHAPED TUBES.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3143, doi. 10.2298/TSCI2304143K

By:

KORTI, Mohammed Choukri;
YOUCEF, Ahmed;
AKGUL, Ali;
ALWAN, Adil Abbas;
MOHSEN, Karrar S.;
ASAD, Jihad;
JARRAR, Rabab;
SHANAK, Hussein;
MENNI, Younes;
ABDULLAEV, Sherzod

Publication type:

Article

INVESTIGATION OF THE EFFECTS ON ENGINE PERFORMANCE AND EMISSIONS OF ZnFe2O4 AND ZnCO3 NANOPARTICLE ADDITIVES IN A DIESEL ENGINE.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3051, doi. 10.2298/TSCI2304051C

By:

CINAR, Gursel

Publication type:

Article

THERMODYNAMIC ANALYSIS OF COMBINED POWER CYCLE, COMBINING HEAT FROM A WASTE HEAT SOURCE WITH SUB-CYCLES.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3031, doi. 10.2298/TSCI2304031E

By:

ELBIR, Ahmet

Publication type:

Article

CFD STUDY OF A DUAL-PASSAGE SOLAR COLLECTOR WITH LONGITUDINAL AND TRANSVERSE BAFFLES FOR ENHANCED THERMAL PERFORMANCE.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3133, doi. 10.2298/TSCI2304133A

By:

AMRAOUI, Mohammed Amine;
ALKHAFAJI, Mohammed Ayad;
ABDULLAEV, Sherzod;
ZEARAH, Sajad A.;
AKGUL, Ali;
JARRAR, Rabab;
SHANAK, Hussein;
ASAD, Jihad;
MENNI, Younes

Publication type:

Article

CFD SIMULATION AND OPTIMIZATION OF HEAT TRANSFER ENHANCEMENT IN HEV STATIC MIXERS WITH ROTATED ANGLES FOR TURBULENT FLOWS.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3123, doi. 10.2298/TSCI2304123K

By:

KAID, Noureddine;
AKGUL, Ali;
ALKHAFAJI, Mohammed Ayad;
MOHSEN, Karrar S.;
ASAD, Jihad;
JARRAR, Rabab;
SHANAK, Hussein;
MENNI, Younes;
ABDULLAEV, Sherzod

Publication type:

Article

EFFECT OF STRESSES ACTING ON IMPELLER BLADES.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3113, doi. 10.2298/TSCI2304113B

By:

BOGREKCI, Ismail;
DEMIRCIOGLU, Pinar;
SERT, Berkay;
GOGEBAKAN, Ahmet;
ABBAKAR, Mujtaba

Publication type:

Article

EXPERIMENTAL OPTIMIZATION OF TRIBOLOGICAL PROPERTIES OF ALUMINUM BRONZE ALLOYS MADE BY THE FORGING METHOD.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3101, doi. 10.2298/TSCI2304101C

By:

CESUR, Idris;
COBAN, Aslan;
BACAK, Sefa;
OZSERT, Ibrahim;
SECGIN, Omer;
KAPTI, Akin Oguz

Publication type:

Article

EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE EFFECT OF VARIABLE OPERATING CONDITIONS ON PEMFC PERFORMANCE.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3089, doi. 10.2298/TSCI2304089K

By:

KAHRAMAN, Huseyin

Publication type:

Article

ANALYSIS AND FORECASTING OF TEMPERATURE USING TIME SERIES FORECASTING METHODS A Case Study of Mus.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3081, doi. 10.2298/TSCI2304081T

By:

TUGAL, Ihsan;
SEVGIN, Fatih

Publication type:

Article

INVESTIGATION OF LiCoO2 THIN FILM BATTERY PROPERTIES WITH CHANGING Ar/O2 GAS ATMOSPHERE.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3071, doi. 10.2298/TSCI2304071A

By:

ALKAN, Engin;
SINGIL, Mustafa Mahmut;
GUNGOR, Hatice;
GULER, Aslihan;
KURUAHMET, Deniz;
GULER, Mehmet Oguz;
AKBULUT, Hatem

Publication type:

Article

EXPERIMENTAL AND NUMERICAL ANALYSIS OF DISTORTIONS AFTER ENAMEL COATING PROCESS ON OVEN CATALYTIC SIDE PANEL SHEETS.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3061, doi. 10.2298/TSCI2304061Y

By:

Harun YAKA;
Samet DURMUS

Publication type:

Article

WOOL DRYING PROCESS IN HEAT-PUMP-ASSISTED DRYER BY FUZZY LOGIC MODELLING.

Published in:

Thermal Science, 2023, v. 27, n. 4B, p. 3043, doi. 10.2298/TSCI2304043A

By:

KODALOGLU, Feyza AKARSLAN;
ELBIR, Ahmet;
SAHIN, Mehmet Erhan

Publication type:

Article