Works matching IS 02728397 AND DT 2025 AND VI 46 AND IP 7

Results: 65

Cover Image.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. i, doi. 10.1002/pc.30005

By:

Maalihan, Reymark D.;
Domalanta, Marcel Roy B.;
Corrales, Andrea Clarisse C.;
Caldona, Eugene B.

Publication type:

Article

Enhancing interfacial adhesion in carbon fiber‐reinforced composites through polydopamine‐assisted nanomaterial coatings.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6768, doi. 10.1002/pc.29479

By:

Sharma, Prabhjot;
Sharma, Sahendra P.

Publication type:

Article

Magnetic field‐enhanced anisotropic electrorheological elastomer with magnetic/electric dual‐responsive rod particles.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6755, doi. 10.1002/pc.29394

By:

Zhao, Xinye;
Niu, Chenguang;
Jia, Zhaomin;
Dong, Xufeng;
Xiong, Xiaoyan

Publication type:

Article

Enhanced poly(butylene adipate‐co‐terephthalate) composite films reinforced with nano‐calcium carbonate modified by a comb‐like polyacrylic superdispersant.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6740, doi. 10.1002/pc.29392

By:

Li, Zhengxiao;
Sun, Yuemeng;
Liang, Linzhi;
Lu, Zhenliang;
Xie, Yanlin;
Dong, Beibei;
Qu, Xiongwei;
Chen, Shengli

Publication type:

Article

Field sensing of temperature and degree of cure for composites manufacture using parameterized physical‐informed neural networks and sparse FBG sensors.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6725, doi. 10.1002/pc.29391

By:

Ma, Yongji;
Zhou, Jinzhu;
Yang, Ting;
Lin, Qiangqiang;
Zhao, Ping;
Li, Honglu

Publication type:

Article

Characterization of interlaminar properties across processing parameters of consolidation of CF/PEKK composites for benchmarking performance.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6714, doi. 10.1002/pc.29390

By:

Korayem, Abd‐Elrahman;
Venkatesan, Karthik;
Chen, Si;
Mapkar, Javed;
Haq, Mahmoodul

Publication type:

Article

Effect of functionalized graphene on mechanical and rheological properties of melt processed polyamide 6 nanocomposites.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6696, doi. 10.1002/pc.29389

By:

Gholizadeh, Armin;
Babaei, Amir;
Haji Abdolrasouli, Mehdi

Publication type:

Article

Investigation on the mechanical properties and ballistic behaviors of sandwich structure of CFRP and biomimetic tendon plates with aramid filaments bundle.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6681, doi. 10.1002/pc.29388

By:

Chu, Yanyan;
Zhao, Xian;
Wang, Xucai;
Xu, Jingyu;
Zhu, Baokun;
Huang, Weihan;
Peng, Tao

Publication type:

Article

Green friction: Exploring the evolution and potential of natural fibers and other brake pad ingredients in sustainable automotive engineering—A review.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 5882, doi. 10.1002/pc.29387

By:

Muthu Samy, M.;
Lenin Singaravelu, D.

Publication type:

Article

Performance analysis of 3D orthogonal polymeric composites reinforced with metallic and glass fibrous z‐binders of varying sizes.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6670, doi. 10.1002/pc.29386

By:

Ghandour, A. Ashraf;
Selmy, A. I.;
Megahed, M.;
Kabeel, A. M.;
Ibrahim, Ahmed

Publication type:

Article

Modeling‐based characterization for thermal expansion and chemical shrinkage of highly viscous epoxy resin with thermoplastic additives under the curing condition.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6657, doi. 10.1002/pc.29385

By:

Liu, Meiyu;
Feng, Yuncong;
Sun, Deyong;
Zhao, Yueqing;
Li, Xiaobing;
Li, Xiaoqiang;
Zhang, Weizhao

Publication type:

Article

In‐situ reduction method to build Chitosan@silver nanoparticles and its application for bis(2‐hydroxyethyl) terephthalate‐based polyurethane composite films with excellent antibacterial and mechanical properties.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6645, doi. 10.1002/pc.29384

By:

Li, Qunyang;
He, Hui;
Liang, Xutong;
Shen, Yue;
Zhang, Cheng;
Kang, Fan;
Zhai, Hongyu;
Zhang, Qianqian

Publication type:

Article

Epoxy resin‐based biomass composites based on modified corn stalks: Preparation, properties, and toughening mechanism.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6634, doi. 10.1002/pc.29383

By:

Lou, Chunhua;
Yang, Yuxin;
Jiang, Siyu

Publication type:

Article

Investigating the bonding performance of metal‐CFRP hybrid composites: A study on aircraft components.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6623, doi. 10.1002/pc.29382

By:

Akalın, Yavuz;
Dilsiz, Nursel;
Özgür, Derya Öncel

Publication type:

Article

Novel hybrid polymer composites for optimized thermal performance in electric vehicle battery cases.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6609, doi. 10.1002/pc.29381

By:

Cebe, Emrullah;
Irez, Alaeddin Burak

Publication type:

Article

Rotomolded polypropylene‐ignimbrite composites: Giving a second life to mineral dust wastes.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6594, doi. 10.1002/pc.29380

By:

Romero, Francisco;
Suárez, Luis;
Díaz, Sara;
Ortega, Zaida

Publication type:

Article

Interfacial and mechanical properties of silane coupling agent interface‐modified basalt fiber reinforced thermoplastic polypropylene resin composites.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6582, doi. 10.1002/pc.29379

By:

Zhang, Zhiqiang;
Sun, Wenhao;
Huang, Weipeng;
Zhu, Yanchao;
Li, Juntao;
Liang, Ce;
Gao, Shuang

Publication type:

Article

Post‐curing effect on the mode I fracture toughness of the glass/epoxy laminates.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6571, doi. 10.1002/pc.29378

By:

Esmaili, Ali;
Taheri‐Behrooz, Fathollah

Publication type:

Article

Improved fracture toughness of glass fibers reinforced polypropylene composites through hybridization with polyolefin elastomers and polymeric fibers for automotive applications.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6553, doi. 10.1002/pc.29377

By:

AlSuhaibani, Faisal A.;
Falath, Wail;
Theravalappil, Rajesh

Publication type:

Article

A novel method and equipment for manufacturing high‐performance fiber‐reinforced polymer composite based on chaotic mixing and stretching force field.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6536, doi. 10.1002/pc.29376

By:

Tan, Lingcao;
Guo, Wenshuai;
Gao, Qi;
Li, Jiqian;
He, Yue;
Huang, Jiarong;
Xu, Wenhua;
Xiao, Shuping;
Yu, Huiwen;
Xu, Baiping

Publication type:

Article

Biodegradable composites filled with agro‐industrial waste and fertilizers for filament production and application in active manufacturing.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6522, doi. 10.1002/pc.29375

By:

de Farias Braz, Cristiano José;
de Oliveira Dias, Alisson Rodrigues;
Figueiredo, Samuel Nogueira;
dos Santos Rosa, Ana Carolina Ferreira;
de Sousa Barros, Iagho;
Alves, Albaniza Tavares;
de Lima Silva, Suédina Maria;
de Carvalho, Laura Hecker;
Barbosa, Renata;
Alves, Tatianny Soares

Publication type:

Article

Electromagnetic shielding property and electrical conductivity of multi‐walled carbon nanotubes filled poly(ε‐caprolactone) composites with dense conductive networks: A simulation and experimental study.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6509, doi. 10.1002/pc.29374

By:

Zheng, Yu‐Chen;
Jiang, Ke;
Hou, Xin;
Feng, Xue‐Rong;
Liu, Jiang‐Tao;
Wang, Ming

Publication type:

Article

Tension fluctuation analysis and structure optimization of yarn carriers in the carbon fiber braiding machine.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6494, doi. 10.1002/pc.29373

By:

Du, Yage;
He, Lei;
An, Zhengyu;
Qi, Bin;
Dong, Benfengnian;
Wang, Yinghao

Publication type:

Article

Molecular dynamics and experimental study of mechanical and tribological properties of graphene‐reinforced nitrile butadiene rubber–phenolic resin composites.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6473, doi. 10.1002/pc.29372

By:

Li, Yunlong;
Chen, Zhiju;
Qian, Cheng;
Wang, Shijie;
Nie, Rui

Publication type:

Article

Mechanical behavior and fracture analysis of the cylindrical component of type‐III high‐pressure composite tanks.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6458, doi. 10.1002/pc.29371

By:

Avcu, Adem;
Seyedzavvar, Mirsadegh;
Boğa, Cem;
Choupani, Naghdali

Publication type:

Article

Experimental investigation of laser texturing on surface roughness and wettability of PAHT CF15 fabricated by fused deposition modeling.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6443, doi. 10.1002/pc.29370

By:

Prasad, Shivam;
Prakash, Shashi

Publication type:

Article

Orientation control of magnetically functionalized graphene oxide nanohybrids in unsaturated polyester resin with enhanced mechanical, thermal, and fire safety performance.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6427, doi. 10.1002/pc.29369

By:

Tang, Tao;
Huo, Junjie;
Li, Weijin;
Lin, Chubin;
Yu, Fuhao;
Wang, Bibo;
Dai, Kang

Publication type:

Article

Micromechanics‐based theoretical modeling and analysis of temperature and moisture‐dependent tensile strength of fiber‐reinforced polymer composites at hygrothermal conditions.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6415, doi. 10.1002/pc.29368

By:

Li, Ying;
Zuo, Mini;
Lin, Yi;
Mai, Zhipeng;
Deng, Qian;
Yang, Mengqing;
Li, Weiguo

Publication type:

Article

Theoretical modeling of the interfacial shear and contact stresses of 2D braided composite cylinders.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6397, doi. 10.1002/pc.29367

By:

Mojarrad, Maryam Zeynivand;
Gharehaghaji, Ali Akbar;
Dabiryan, Hadi;
Rezadoust, Amir Masoud

Publication type:

Article

Enhanced mechanical property of polyethylene wax/gadolinium oxide/methyl vinyl silicone rubber composites via gamma irradiation.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6382, doi. 10.1002/pc.29366

By:

Xin, Lingfei;
Dai, Yaodong;
Qian, Bingbing;
Yao, Chuqing;
Wang, Guohui

Publication type:

Article

Synergies of polypyrrole and carbon nanotube on carbon fiber fabrics for improving electrochemical and mechanical properties of structural supercapacitor electrodes.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6360, doi. 10.1002/pc.29365

By:

Zeng, Siheng;
Wang, Xin;
Wu, Zhishen;
Hua, Luqing

Publication type:

Article

Mechanical behavior, energy absorption, and failure mechanism of 3D‐printed hexagonal honeycomb core under dynamic and quasi‐static loadings.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6346, doi. 10.1002/pc.29364

By:

Ainin, F. Nur;
Azaman, M. D.;
Abdul Majid, M. S.;
Ridzuan, M. J. M.

Publication type:

Article

Bio‐based epoxidized natural rubber nanocomposites for high‐performance tire tread applications.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6335, doi. 10.1002/pc.29363

By:

Zhao, Luan;
Liu, Ling;
Li, Hanyu;
Zhang, Yuxi;
Zhang, Liqun

Publication type:

Article

Fabrication of microfibrillated cellulose reinforced polypropylene composites assisted by a synergistic strategy of pre‐quaternization and paper‐making process.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6322, doi. 10.1002/pc.29362

By:

Guo, Kunwu;
Yao, Chenguang;
Huang, Zhen;
Liu, Hongzhi

Publication type:

Article

Effect of laminae count and manufacturing methods on mechanical properties of thin‐ply woven composites.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6305, doi. 10.1002/pc.29361

By:

Kushwaha, Shashank;
Mahrous, Mahmoud A.;
Meyer, Jacob L.;
Chadha, Charul;
Jasiuk, Iwona M.

Publication type:

Article

Methacrylamide‐substituted para‐aramid as an innovative sizing agent for improving the mechanical properties of carbon fiber/vinyl ester resin composites.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6290, doi. 10.1002/pc.29360

By:

Yu, Boshi;
Zhang, Yiwei;
Liu, Yue;
Jin, Yewei;
Song, Yihu;
Peng, Mao

Publication type:

Article

Silane‐treated kapok fiber/epoxy composites for aerospace cabin interiors: Synthesis and characterization.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6270, doi. 10.1002/pc.29359

By:

Das, Ramyaranjan;
Sahu, Dhaneshwar Prasad;
Bisoyi, Dillip Kumar

Publication type:

Article

Advances in interfacially engineered surface‐functionalized fillers for multifunctional polymer composite coatings.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 5857, doi. 10.1002/pc.29358

By:

Maalihan, Reymark D.;
Domalanta, Marcel Roy B.;
Corrales, Andrea Clarisse C.;
Caldona, Eugene B.

Publication type:

Article

Enhanced flexural and vibration behavior of interleaved CFRP composite joints with modified multiwalled carbon nanotube adhesives for aerospace and aircraft applications.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6254, doi. 10.1002/pc.29357

By:

Karthikeyan, N.;
Naveen, Jesuarockiam

Publication type:

Article

Comparative study on flexural performances of carbon fiber reinforced polymers with micro‐, micro‐/nano‐, and nano‐sized aramid fiber interlayers.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6241, doi. 10.1002/pc.29356

By:

Hu, Yunsen;
Gao, Yuxuan;
Tan, Bo;
Hu, Xiaozhi;
Zhang, Jian

Publication type:

Article

The influence of water absorption on the mechanical performance of 3D‐printed sandwich composite structures made from PLA‐based materials under quasi‐static loading conditions.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6221, doi. 10.1002/pc.29355

By:

Ainin, F. Nur;
Azaman, M. D.;
Abdul Majid, M. S.;
Ridzuan, M. J. M.

Publication type:

Article

Green and mild approach for carbon fibers recycling from honeycomb sandwich thermoset composite wastes.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6208, doi. 10.1002/pc.29354

By:

Zhao, Qi;
Chen, Junzhen;
Yang, Guoyu;
Wang, Shaozhe;
Li, Yujun;
Jiang, Jianjun

Publication type:

Article

Efficacy of carbon nanotube bucky paper for interlaminar damage sensing in composites and fiber‐metal laminates.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6192, doi. 10.1002/pc.29353

By:

Kumar, Vinay;
Agnihotri, Prabhat K.

Publication type:

Article

Enhancing impact resistance of fiber‐reinforced polymer composites through bio‐inspired helicoidal structures: A review.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 5823, doi. 10.1002/pc.29352

By:

Xu, Yaxing;
Feng, Dianshi

Publication type:

Article

Temperature effects on tensile and bending properties of carbon/Kevlar hybrid fiber sandwich composites.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6179, doi. 10.1002/pc.29351

By:

Chen, Miao;
Gao, Xiaoping;
Chen, Jiawei;
You, Geyi;
Liu, Ce;
Zhao, Ke

Publication type:

Article

An induction curing technique for CFRP laminate via magnetic particle‐induced in situ heating.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6169, doi. 10.1002/pc.29350

By:

Li, Yichao;
Hu, Xiafen;
Hao, Lei;
Liang, Jiqiu;
Wu, Dan;
Sun, Ao;
Xi, Zhaojun;
Jin, Peng;
Xiong, Yi

Publication type:

Article

Effect of fatigue loading on physical and structural properties of epoxy in glass fiber reinforced polymer: An analysis.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6156, doi. 10.1002/pc.29349

By:

Moghadas, S. A.;
Zabett, Ahad;
Sahebian, Samaneh;
Ramezanian, N.

Publication type:

Article

Study on mechanical performance of carbon fiber reinforced polyetherketoneketone prepreg and its composites prepared by slurry method.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6146, doi. 10.1002/pc.29348

By:

Cheng, Dongcai;
Shen, Wensi;
Chen, Yuxi;
Zhang, Weijian;
Huang, Yuexing;
He, Yuzhao;
Yu, Lichao;
Shen, Linfeng

Publication type:

Article

Percolation theory analysis of nacre‐like bioinspired poly(trimethylene terephthalate)/graphene nanosheets‐iron oxide composites.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6126, doi. 10.1002/pc.29347

By:

Huang, Chien‐Lin;
Lin, En‐Zai;
Tung, Ping‐Zhang;
Xue, Ming‐Ru

Publication type:

Article

Interconnected expanded graphite/stearic acid networks for self‐lubricating PA6 composites with excellent heat dissipation performance.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6113, doi. 10.1002/pc.29346

By:

Feng, Wenkai;
Liang, Bo;
Li, Haorong;
Chen, Jing;
Gao, Xiping;
Yao, Dahu;
Lu, Chang;
Pang, Xinchang

Publication type:

Article