Works matching IS 02728397 AND DT 2024 AND VI 45 AND IP 2
Results: 69
Plastic composite of bamboo charcoal stabilized polyethylene glycol with thermal energy storage and temperature regulation for building energy efficiency.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1910, doi. 10.1002/pc.27898
- By:
- Publication type:
- Article
A novel wood fiber/waterborne epoxy resin composite with high fiber content and performance fabricated by a green and simple process.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1898, doi. 10.1002/pc.27897
- By:
- Publication type:
- Article
Experimental investigations on the repeated low velocity impact and compression‐after‐impact behaviors of woven glass fiber reinforced composite laminates.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1884, doi. 10.1002/pc.27896
- By:
- Publication type:
- Article
Superior strength in the 3D‐printed polyether‐ether‐ketone composites reinforced by annealing and carbon fibers.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1872, doi. 10.1002/pc.27895
- By:
- Publication type:
- Article
Development of novel models for fatigue life assessment of natural rubber/styrene‐butadiene rubber/nanoclay nanocomposite.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1851, doi. 10.1002/pc.27894
- By:
- Publication type:
- Article
Achieving superior pyroresistive reproducibility at HDPE/PVDF composites with tailored conductive phase size.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1839, doi. 10.1002/pc.27893
- By:
- Publication type:
- Article
In situ exfoliation and surface functionalization of graphene oxide for epoxy composites with improved thermal and mechanical properties.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1826, doi. 10.1002/pc.27892
- By:
- Publication type:
- Article
Fast and accurate prediction of cure quality and mechanical performance in fiber‐reinforced polymer composite using dielectric variables and machine learning.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1810, doi. 10.1002/pc.27891
- By:
- Publication type:
- Article
Buckling analysis of composite plates surface bonded with graphene‐reinforced piezoelectric actuators.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1793, doi. 10.1002/pc.27890
- By:
- Publication type:
- Article
Effect of fillers and weave architecture hybridization on the impact performance of 3D woven hybrid green composites.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1776, doi. 10.1002/pc.27889
- By:
- Publication type:
- Article
Investigation of the bending and quasi‐static indentation properties of three‐dimensional (3D) textile‐reinforced composites.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1703, doi. 10.1002/pc.27883
- By:
- Publication type:
- Article
Regulation and prediction of the dielectric constant and interfacial binding energy of surface modified hexagonal boron nitride/polyphenylene oxide@cyanate ester resin.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1749, doi. 10.1002/pc.27887
- By:
- Publication type:
- Article
Glass fiber/epoxy composites with improved interfacial adhesion by using cross‐linking sizing agent.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1737, doi. 10.1002/pc.27886
- By:
- Publication type:
- Article
Study of the influence of PPS, PAEK, and PEEK thermoplastic matrices on the static mechanical behavior of carbon fiber‐reinforced composites.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1726, doi. 10.1002/pc.27885
- By:
- Publication type:
- Article
Modeling thermal conductivity of polymer/carbon fiber composites prepared by SCFNA method.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1715, doi. 10.1002/pc.27884
- By:
- Publication type:
- Article
Experimental investigation on mechanical performance of PVC foam‐based E‐glass isophthalic polyester composites.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1762, doi. 10.1002/pc.27888
- By:
- Publication type:
- Article
Experimental validation study on snap through and coiling up of deployable composite shells.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1688, doi. 10.1002/pc.27882
- By:
- Publication type:
- Article
Improving the mechanical properties and curing characteristics of styrene‐butadiene rubber/butadiene rubber composites by incorporating silicon carbide.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1676, doi. 10.1002/pc.27881
- By:
- Publication type:
- Article
A new method for studying the wear properties of novel wear‐resistant ethylene propylene diene monomers/polyamide elastomer material from the perspective of cross‐linked network structure.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1664, doi. 10.1002/pc.27880
- By:
- Publication type:
- Article
Preparation and sound insulation of honeycomb composite structures filled with glass fiber.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1649, doi. 10.1002/pc.27879
- By:
- Publication type:
- Article
Failure behavior and crashworthiness characteristic of repaired composites‐metal hybrid tubes by acoustic emission.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1632, doi. 10.1002/pc.27878
- By:
- Publication type:
- Article
Synthesis and effect of using silica fume particles on shear properties of basalt fibers‐epoxy composites.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1619, doi. 10.1002/pc.27877
- By:
- Publication type:
- Article
Investigation on the effect of multiwalled carbon nanotubes in carbon fiber‐reinforced epoxy composites manufactured using vacuum infusion process and hand layup process followed by vacuum bagging.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1600, doi. 10.1002/pc.27876
- By:
- Publication type:
- Article
A new parameter to describe crippling strength: Experimental and theoretical investigations for post‐buckling behaviors of the composite structures.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1585, doi. 10.1002/pc.27875
- By:
- Publication type:
- Article
Effect of process parameters on the mechanical behavior of additively manufactured and FSW joined PLA wood sheets.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1568, doi. 10.1002/pc.27874
- By:
- Publication type:
- Article
Effect of surface texture spacing on interface heat transfer and tensile property of laser‐welded steel/CFRTP joint.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1551, doi. 10.1002/pc.27873
- By:
- Publication type:
- Article
Two‐dimensional Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> (MXene)‐multiwalled carbon nanotubes reinforced ethyl methyl acrylate/ethylene octene copolymer binary blend hybrid nanocomposites with enhanced thermal and dielectric properties.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1534, doi. 10.1002/pc.27872
- By:
- Publication type:
- Article
An energy storage composite using cellulose grafted polyethylene glycol as solid–solid phase change material.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1524, doi. 10.1002/pc.27871
- By:
- Publication type:
- Article
Laponite/magnetite nanoparticles including waterborne latexes and effect of conditions for stable composite latexes.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1508, doi. 10.1002/pc.27870
- By:
- Publication type:
- Article
Effect of inorganic particles gradation on the properties of high‐filled unsaturated polyester resin/CaCO<sub>3</sub> composites.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1494, doi. 10.1002/pc.27869
- By:
- Publication type:
- Article
Core–sheath structured polystyrene‐ethylene‐butene‐styrene/carbon nanotubes/carbonyl iron particlecomposite fiber with high stretchability for strain and magnetic field dual‐mode sensing.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1483, doi. 10.1002/pc.27868
- By:
- Publication type:
- Article
Research and prediction of creep behavior of triaxial warp‐knitted composites by time–temperature equivalent principle.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1472, doi. 10.1002/pc.27867
- By:
- Publication type:
- Article
Atmospheric pressure plasma application on the adhesive bonding improvement of CFRP via surface configuration comparison.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1461, doi. 10.1002/pc.27866
- By:
- Publication type:
- Article
Comprehensive analysis of 3D printed PA6.6 and fiber‐reinforced variants: Revealing mechanical properties and adhesive wear behavior.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1446, doi. 10.1002/pc.27865
- By:
- Publication type:
- Article
Preparation of continuous carbon fiber‐filled silicone rubber with high thermal conductivity through wrapping.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1437, doi. 10.1002/pc.27864
- By:
- Publication type:
- Article
Rheological percolation, gel‐like behavior and electrical conductivity of multi‐walled carbon nanotubes filled ethylene‐vinyl acetate copolymer/acrylonitrile‐butadiene rubber nanocomposites.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1422, doi. 10.1002/pc.27863
- By:
- Publication type:
- Article
Study on the heating mechanism and macro/micro properties of composite materials under microwave curing.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1405, doi. 10.1002/pc.27862
- By:
- Publication type:
- Article
Preparation, characterization, and in vitro biological evaluation of salicylic acid‐modified polyphenylene sulfide/quartz fiber/hydroxyapatite composite with high mechanical property for bone replacement.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1391, doi. 10.1002/pc.27861
- By:
- Publication type:
- Article
Analyzing the effect of fiber path curvature on the fracture behavior of braided composite cylinders; experimental study.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1378, doi. 10.1002/pc.27860
- By:
- Publication type:
- Article
A novel design of three‐dimensional/unidirectional hybrid composites to balance in‐plane and interlaminar mechanical properties.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1361, doi. 10.1002/pc.27859
- By:
- Publication type:
- Article
Distribution and reinforcement effect of carbon fiber at the interface in injection welding of polyamide 6 composites.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1347, doi. 10.1002/pc.27858
- By:
- Publication type:
- Article
Cycle deformation behavior of 3D‐printed CF/PEEK honeycomb metamaterials with zero Poisson's ratios.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1329, doi. 10.1002/pc.27857
- By:
- Publication type:
- Article
Interface failure identification of argon/nitrogen double plasma modified hybrid laminated para‐aramid composites.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1316, doi. 10.1002/pc.27856
- By:
- Publication type:
- Article
Crushing behavior optimization of octagonal lattice‐structured thin‐walled 3D printed carbon fiber reinforced PETG (CF/PETG) composite tubes under axial loading.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1228, doi. 10.1002/pc.27848
- By:
- Publication type:
- Article
An investigation of the mechanical characteristics of natural particle‐reinforced glass and epoxy composites after immersion in acidic and basic aging solutions.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1288, doi. 10.1002/pc.27854
- By:
- Publication type:
- Article
Multi‐physical honeycomb metastructure fabricated by fused deposition modeling with broadband radar absorption and mechanical resistance for drones.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1278, doi. 10.1002/pc.27853
- By:
- Publication type:
- Article
Preparation of GO‐SiO<sub>2</sub> three‐dimensional point‐plane nanomaterials and enhancement of epoxy resin mechanical property.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1266, doi. 10.1002/pc.27851
- By:
- Publication type:
- Article
Compatibility of high strength silica‐modified microcapsules modified with polydopamine in elastomer substrates.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1250, doi. 10.1002/pc.27850
- By:
- Publication type:
- Article
Characterization of the void content and laminate quality of fiber‐reinforced plastic composites manufactured using the resin spray and compaction method.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1300, doi. 10.1002/pc.27855
- By:
- Publication type:
- Article
Robust multi‐walled carbon nanotubes@thermoplastic polyurethane porous films with conductive fabrics for wearable triboelectric nanogenerators.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1208, doi. 10.1002/pc.27846
- By:
- Publication type:
- Article