Works matching IS 02728397 AND DT 2024 AND VI 45 AND IP 17

Results: 66

Enhancing structural performance of 3D‐printed adhesively bonded flat‐joggle‐flat polymer joints with graphene‐reinforced adhesive.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16335, doi. 10.1002/pc.29037

By:

Dhilipkumar, Thulasidhas;
Venkatesan, Raja;
Hiremath, Vinayak S.;
Kesavan, S.;
P, Karuppusamy;
Shankar, Karthik V.;
Alduhaish, Osamah

Publication type:

Article

Performance assessment of agricultural waste based eco‐friendly brake friction composites.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16317, doi. 10.1002/pc.29007

By:

Kılıç, Halil

Publication type:

Article

Development and characterization of polymer composites with cotton straw fiber derived from agricultural wastes.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16304, doi. 10.1002/pc.28957

By:

Liu, Yucheng;
Ou, Mingxiong;
Gao, Yuanyuan;
Ding, Hengnan;
Zhuo, Liucheng;
Ma, Yunhai

Publication type:

Article

Study on a novel flexible high dielectric poly (isoprene‐co‐acrylonitrile)/barium titanate composite with a reversible cross‐linked structure.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16218, doi. 10.1002/pc.28901

By:

Dai, Xin;
Liu, Lijiang;
Lin, Fangjun;
Wang, Zhenxi;
Peng, Yong;
Liu, Youping;
Luo, Jixiang;
Ma, Ziyong

Publication type:

Article

Unveiling the impact of percolation phenomenon on the microstructure of polymer nanocomposites based on the combination of scaling and percolation theories.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16280, doi. 10.1002/pc.28905

By:

Ader, Fiona;
Sharifzadeh, Esmail;
Azimi, Neda

Publication type:

Article

Polyethylene/graphene‐nanoplatelets nanocomposites with improved thermochemical stability: The role of surface polarity of graphene‐nanoplatelets.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16262, doi. 10.1002/pc.28904

By:

Ghadami Karder, Hamidreza;
Pircheraghi, Gholamreza

Publication type:

Article

Study on short fiber reinforcement mechanism for mechanical performance improvement of 3D‐printed short‐continuous carbon fiber reinforced thermoplastic composites.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16244, doi. 10.1002/pc.28903

By:

Wang, Gongshuo;
Wang, Fuji;
Wang, Hongquan;
Fu, Rao;
Zhou, Jianming

Publication type:

Article

Mechanical behavior of hybrid glass‐flax‐carbon fiber‐reinforced polymer composites under static and dynamic loading.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16228, doi. 10.1002/pc.28902

By:

Mabrouk, Osama M.;
Khair‐Eldeen, Wael;
Hassanin, Ahmed H.;
Hassan, Mohsen A.

Publication type:

Article

In‐situ preparation of modified‐halloysite/thermoset nanocomposites via thiol‐epoxy click chemistry.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16293, doi. 10.1002/pc.28932

By:

Bekin Acar, Seda

Publication type:

Article

Biocompatibility, thermal and mechanical properties of glass fiber‐reinforced polybenzoxazine composites as a potential new endodontic post.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16205, doi. 10.1002/pc.28900

By:

Mora, Phattarin;
Rimdusit, Sarawut;
Karagiannidis, Panagiotis;
Srisorrchart, Ukrit;
Jubsilp, Chanchira

Publication type:

Article

Effect of annealing treatment on impact toughness and crystallization behaviors of polypropylene/ethylene vinyl acetate copolymer/layered double hydroxide composites.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16193, doi. 10.1002/pc.28899

By:

Guo, Xincheng;
Lian, Honglin;
Qin, Jun;
Guo, Jianbing;
Chen, Xiaolang;
Chu, Longsheng

Publication type:

Article

Fluorosilane modification on BaTiO<sub>3</sub> particles: A facile method to fabricate PVDF dielectric composites with desirable mechanical properties.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16179, doi. 10.1002/pc.28898

By:

Shi, Yuqi;
Tang, Junhang;
Chen, Qiuyue;
Chen, Xin;
Mao, Zepeng

Publication type:

Article

A stiffness prediction method for variable cross‐section CFRP laminated beam.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16167, doi. 10.1002/pc.28897

By:

Yang, Yuxing;
Liu, Zhen;
Zheng, Zhi;
Zhang, Leqiang;
Bao, Yongjie;
Chen, Chen

Publication type:

Article

Correlation between the electrical and thermal conductivity of acrylonitrile butadiene styrene composites with carbonaceous fillers with different dimensionality.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16153, doi. 10.1002/pc.28896

By:

Tubio, Carmen R.;
Merazzo, Karla J.;
Abad, Maria‐Jose;
Ares‐Penas, Ana I.;
Malet, Ramón;
Pérez, Marc;
Costa, Pedro;
Lanceros‐Mendez, Senentxu

Publication type:

Article

Evaluation of wear and friction properties of graphite modified Lubri polylactic acid with various infill fabricated by additive manufacturing techniques.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16133, doi. 10.1002/pc.28895

By:

Şirin, Şenol;
Yıldırım, Çağrı Vakkas;
Sevinç, Alperen Mehmet;
Ceylan, Alpertunga;
Kara, Muhammed İkbal

Publication type:

Article

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16112, doi. 10.1002/pc.28894

By:

Shah, Adarsh Kumar;
Vora, Yash Anup;
Palit, Arnab;
Williams, Mark A.;
Wilson, Paul F.;
Jain, Atul

Publication type:

Article

Low‐velocity impact damage behavior of glass fiber reinforced composites with different crack propagation.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16097, doi. 10.1002/pc.28892

By:

Yang, Shun;
Wei, Ying;
Yin, Hongfeng;
Li, Dawei;
Xue, Feibiao;
Song, Fang;
Liu, Ziqiang

Publication type:

Article

Impact resistance optimization of composite laminates based on variable‐fidelity surrogate model.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16075, doi. 10.1002/pc.28891

By:

Liu, Yuchi;
Lu, Jing;
Zhang, Haowei;
Wang, Haijin;
Wang, Han;
Bi, Yunbo

Publication type:

Article

Material property characterization of 3D printed polypropylene wood plastic composites.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16058, doi. 10.1002/pc.28890

By:

Hwang, Sungjun;
Fowler, Gavin;
Han, Yousoo;
Gardner, Douglas J.

Publication type:

Article

Improving interfacial bonding and impact characteristics of Sandwich composites by interweaving carbon fiber.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16043, doi. 10.1002/pc.28889

By:

Rajesh, Shalaka;
Taywade, Soham Ravindra;
Devaraj, Selwyn Jebadurai;
Arputham, Arul Jeya Kumar

Publication type:

Article

Transverse tensile behavior of carbon fiber/epoxy composite at different temperatures and strain rates.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16033, doi. 10.1002/pc.28888

By:

Wu, Qiaoguo;
Wu, Yuxiang;
Zu, Lei;
Wang, Qiankun;
Zhang, Qian;
Zhang, Guiming;
Fu, Jianhui;
Zhou, Lichuan;
Pan, Helin

Publication type:

Article

Study on the process of hot gas‐assisted GF/PA5X thermoplastic composites automated tape placement.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 16021, doi. 10.1002/pc.28886

By:

Liu, Hao;
Li, Yong;
Huan, Da‐Jun;
Zhu, Kang;
Guo, Da

Publication type:

Article

Influence of out‐of‐autoclave and autoclave manufacturing processes on mechanical properties of glass fiber‐reinforced epoxy composite.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15998, doi. 10.1002/pc.28885

By:

Dewangan, Bhishm;
Chakladar, N. D.

Publication type:

Article

Enhanced interface electrical insulation of aramid‐reinforced resin composites via iron phthalocyanine self‐assembled structures on the surface of aramid.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15983, doi. 10.1002/pc.28884

By:

Xie, Jun;
Zhang, Youzhi;
Xia, Guowei;
Xu, Bobin;
Qiao, Longyin;
Hu, Chengming;
Xie, Qing

Publication type:

Article

Enhanced thermal conductivity of polypropylene/polyamide 6 composites via optimizing the selective distribution of h‐BN and NH<sub>2</sub>‐CNTs hybrid fillers within the co‐continuous structure.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15968, doi. 10.1002/pc.28883

By:

Jing, Xinyi;
Meng, Linggong;
Liu, Tong;
Ye, Xinming;
Yang, Shuai;
He, Zhichao;
Wang, Wensheng;
Li, Jie;
Li, Yingchun

Publication type:

Article

Synthesis of multicomponent boron nitride/carbon nanotube conjugated hybrid composite nanosol aqueous sizing agent to improve mechanical properties and thermal conductivity of carbon fiber composites.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15954, doi. 10.1002/pc.28882

By:

Wu, Yunhuan;
Li, Weiwen;
Quan, Guipeng;
Ao, Yuhui;
Xiao, Linghan;
Liu, Yujing

Publication type:

Article

Comparison of the dynamic characteristics of GFRP, CFRP, and hybrid composites subjected to repeated low‐velocity impact.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15941, doi. 10.1002/pc.28881

By:

Sozen, Betul;
Coskun, Taner;
Kapıcı, Serkan;
Sahin, Omer Sinan

Publication type:

Article

Enhancing mechanical and tribological performance of hybrid composites: An experimental study utilizing response surface methodology and firefly algorithm.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15924, doi. 10.1002/pc.28880

By:

Dash, Soumya;
Satpathy, Mantra Prasad;
Routara, Bharat Chandra;
Pati, Pravat Ranjan;
Gantayat, Subhra

Publication type:

Article

Synthesis of a novel fluorinated polyimide for preparing thermally conductive polyimide composites.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15915, doi. 10.1002/pc.28879

By:

Lee, Wondu;
Kim, Jihoon;
Hong, Hyeokgi;
Noh, Hohyeon;
Park, Dabin;
Jung, Hyun Min;
Kim, Jooheon

Publication type:

Article

Improvement of interfacial adhesion of aramid fiber/polycarbonate composites by surface modification with graphene oxide modified sizing agents.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15901, doi. 10.1002/pc.28878

By:

Zhang, Peng;
Zhu, Liangbo;
Song, Jiyin;
Ma, Yufang;
Kong, Haijuan;
Yu, Muhuo;
Chen, Chaofeng

Publication type:

Article

Tensile and flexural behavior of graphene‐reinforced carbon/epoxy composites manufactured via compression molding method.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15891, doi. 10.1002/pc.28877

By:

Shelar, Mahendra L.;
Suryawanshi, Vinod B.;
Wayzode, Neerajkumar

Publication type:

Article

Mechanical and thermal properties of rice husk/glass fiber/polylactic acid composites.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15878, doi. 10.1002/pc.28876

By:

Sun, Yufeng;
Zhang, Ziheng;
Wang, Jinwei;
Liu, Hengyu;
Shi, Dongming;
Liu, Mingyang;
Ying, Jilai;
Mu, Wenlong;
Li, Defeng;
Wu, Song

Publication type:

Article

DeoxyriboNucleic acid‐enhanced carbon nanotube dispersed epoxy resin composites: Mechanical and thermal properties study.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15857, doi. 10.1002/pc.28875

By:

Li, Qianxi;
Peng, Xiong;
Zhong, Xingu;
Zhou, Yi;
Luo, Tianye;
Zhang, Xinke

Publication type:

Article

Coir fiber reinforced chemically functionalized ethylene butylene acrylate composites.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15846, doi. 10.1002/pc.28874

By:

Gupta, Hariome Sharan;
Palsule, Sanjay

Publication type:

Article

High performance poly(ethylene‐co‐vinyl acetate)/nickel oxide nanocomposite prepared through open mill mixing technique for energy storage applications.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15832, doi. 10.1002/pc.28873

By:

Shini, M.;
Arun, K.;
Ramesan, M. T.

Publication type:

Article

Insights from dispersion in carbon nanotubes‐based poly(vinylidene fluoride‐co‐hexafluoropropylene) wearable sensors via solvent casting.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15741, doi. 10.1002/pc.28867

By:

Díaz‐Mena, V.;
Sánchez‐Romate, Xoan F.;
Sánchez, M.;
Ureña, A.

Publication type:

Article

Effect of cobalt ferrite concentration on the EMI shielding effectiveness of cobalt ferrite/graphene based epoxy composites.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15804, doi. 10.1002/pc.28871

By:

S., Manobalan;
Bose, Suryasarathi;
T. P., Sumangala

Publication type:

Article

The effect of absorbed moisture and resin pressure on porosity in autoclave cured epoxy resin.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15793, doi. 10.1002/pc.28870

By:

Dei Sommi, Andrea;
Lionetto, Francesca;
Buccoliero, Giuseppe;
Maffezzoli, Alfonso

Publication type:

Article

Compression behavior and design optimization of triggered glass fiber reinforced polymer square tubes.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15776, doi. 10.1002/pc.28869

By:

Baykasoğlu, Cengiz;
Baykasoğlu, Adil;
Erdin, Muhammed Emin;
Cetin, Erhan

Publication type:

Article

Investigating the effect of Nylon 6.6 electrospun nanofiber mats and punch—Die clearance on the damaged area and residual strength of punched glass/epoxy composite laminates.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15759, doi. 10.1002/pc.28868

By:

Gholizadeh, Ali;
Nikbakht, Ali;
Mollaei Dariani, Bijan

Publication type:

Article

Effect of hollow glass microspheres on transverse properties of carbon fiber reinforced epoxy composites.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15820, doi. 10.1002/pc.28872

By:

Tejasvi, K.;
Sharma, Annu;
Ranga, K. V. S.;
Gurusideswar, S.;
Sundar Singh, P.

Publication type:

Article

Solutions and applications of fracture properties for clamped single edge notched tensile specimen of orthotropic materials.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15726, doi. 10.1002/pc.28866

By:

Wang, Jinghui;
Jin, Pengfei;
Chen, Haoruo;
Liu, Zheng;
Zhang, Zhe;
Wang, Xin;
Chen, Xu

Publication type:

Article

Flexible hexagonal boron nitride@liquid metal/polydimethylsiloxane composites with excellent thermal conductivity and superior mechanical properties.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15715, doi. 10.1002/pc.28865

By:

Chen, Yu;
Yao, Fei;
Niu, Hongrang;
Liu, Chuanqi;
Yang, Zhou;
Jiang, Yue;
Luo, Zhou;
Xu, Zhiguang

Publication type:

Article

Enhanced mechanical property and flame retardancy of halogen‐free PE/EVA composites through crosslinking and carbon fiber inclusion.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15704, doi. 10.1002/pc.28864

By:

Du, Ao;
Chen, Hongmei;
Chen, Jie;
Wang, Bo;
Cai, Zeyun;
Qiu, Hua‐Jun;
Xie, Guoqiang

Publication type:

Article

Cellulose nanofibers from sugarcane bagasse and their application in starch‐based packaging films.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15689, doi. 10.1002/pc.28861

By:

Siriwong, Chomsri;
Sae‐oui, Pongdhorn;
Chuengan, Saksit;
Ruanna, Monthita;
Siriwong, Khatcharin

Publication type:

Article

Reinforcing and toughening poly (lactic acid) using cellulose nanocrystal grafted with epoxidized soybean oil.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15675, doi. 10.1002/pc.28860

By:

Xie, Zhongyuan;
Li, Xinyu;
Zhang, Qiyuan;
Jiang, Hua

Publication type:

Article

Interface modification strategy to construct SiC nanowires@pyrolytic carbon reinforcement for carbon fiber composites.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15664, doi. 10.1002/pc.28859

By:

Wan, Xinyi;
Zhang, Leilei;
Shen, Xuetao;
Wang, Tiantian;
Sheng, Hongchao;
Li, Hejun

Publication type:

Article

Comparison of carbon‐reinforced composites manufactured by vacuum assisted resin infusion with traditional and fully recyclable epoxy resins.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15649, doi. 10.1002/pc.28858

By:

Tosto, Claudio;
Saitta, Lorena;
Barouni, Antigoni;
Sarasini, Fabrizio;
Tirilló, Jacopo;
Bavasso, Irene;
Ziegmann, Gerhard

Publication type:

Article

Enhanced mechanical, thermal properties and thermal conductivities of epoxy composites via incorporating graphene oxide‐grafted carbon nanotubes hybrids.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15637, doi. 10.1002/pc.28857

By:

Liu, Song;
Zhang, Jingshan;
Fan, Xiangying;
Hu, Linchen;
Guan, Jun;
Zeng, Shaohua

Publication type:

Article

Mechanical study on hybrid joining type carbon fiber reinforced composite.

Published in:

Polymer Composites, 2024, v. 45, n. 17, p. 15625, doi. 10.1002/pc.28856

By:

Kaplan, Nil;
Gulluoglu, Arif Nihat;
Turkmen, Halit Suleyman

Publication type:

Article