Works matching IS 02728397 AND DT 2023 AND VI 44 AND IP 6

Results: 53

Preparation of highly thermally conductive epoxy composites featuring self‐healing and reprocessability.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3698, doi. 10.1002/pc.27355
By:
- Cui, Wenqi;
- Hu, Ting;
- Yang, Shuguang;
- Huang, Baoquan;
- Qian, Qingrong;
- Chen, Qinghua;
- Luo, Fubin
Publication type:
Article
Quasi‐static compression behavior and crashworthiness of GLARE laminate conical frustum with progressive circular and square cut‐outs.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3685, doi. 10.1002/pc.27354
By:
- Logesh, K.;
- Hariharasakthisudhan, P.;
- Bright, Renjin J.;
- Kannan, Sathish;
- Khalkar, V.;
- Sundaraiah, N.
Publication type:
Article
Analysis of ducted fan warpage based on the response surface methodology and a genetic algorithm.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3670, doi. 10.1002/pc.27353
By:
- Liu, Liang;
- Lyu, Qiongying;
- Cao, Cong
Publication type:
Article
Constructing Fe2O3 particles uniformly grown on graphene oxide as additives for ethylene vinyl acetate copolymer thermal stability, thermal conductivity and anti‐static performance enhancement.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3658, doi. 10.1002/pc.27352
By:
- Hong, Xiansheng;
- Lin, Fanyi;
- Zheng, Weijie;
- Zheng, Yuying
Publication type:
Article
Dynamic viscoelastic behavior and interlaminar performance of glass/epoxy composites with binary nano‐fillers at different in‐situ elevated temperature environments.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3646, doi. 10.1002/pc.27351
By:
- Shubham;
- Prusty, Rajesh Kumar;
- Ray, Bankim Chandra
Publication type:
Article
Placement defects in thermoset‐impregnated rovings deposited along curved paths.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3634, doi. 10.1002/pc.27350
By:
- Eckrich, Maximilian;
- Arrabiyeh, Peter A.;
- Dlugaj, Anna M.;
- May, David
Publication type:
Article
Mode I and II interlaminar fracture toughness of glass/carbon inter‐ply hybrid FRP composites: Effects of stacking sequence and testing temperature.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3622, doi. 10.1002/pc.27349
By:
- Dasari, Srinivasu;
- Patnaik, Satyaroop;
- Bhattacharyya, Tanmay;
- Mukherjee, Subrata;
- Ray, Bankim Chandra;
- Prusty, Rajesh Kumar
Publication type:
Article
Preparation of a 3D BN network structure by a salt‐template‐assisted method filled with epoxy resin to obtain high thermal conductivity nanocomposites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3610, doi. 10.1002/pc.27348
By:
- Wang, Zhanyi;
- Wang, Xuan;
- Zhang, Zhonghua;
- Liang, Liang;
- Zhao, Zhihang;
- Shi, Jiahao
Publication type:
Article
Strength prediction and experimental damage investigations of plain woven CFRPs with interacting holes using multi‐instrument measurements.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3594, doi. 10.1002/pc.27347
By:
- Khan, Raja Muhammad Awais;
- Shafighfard, Torkan;
- Ali, Hafiz Qasim;
- Mieloszyk, Magdalena;
- Yildiz, Mehmet
Publication type:
Article
Combined effects of nanoparticle and stretch‐induced orientation on crystal structure and properties of UHMWPE/TiO2 composite microporous membranes.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3580, doi. 10.1002/pc.27346
By:
- Hu, Tao;
- Mu, Yue;
- Chen, Yunqiang;
- Zhou, Chengfan;
- Zhao, Guoqun;
- Dong, Guiwei
Publication type:
Article
Enhancing energy storage property of polymer nanocomposites by rationally regulating shell thickness of core–shell structured nanoparticles.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3567, doi. 10.1002/pc.27345
By:
- Gao, Liang;
- Zhang, Jiaqi;
- Chen, Zijun;
- Wang, Xuan
Publication type:
Article
Mechanical characterization of hybrid biocomposites reinforced with nonwoven hemp and unidirectional flax fibers.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3555, doi. 10.1002/pc.27344
By:
- Baysal, Ataberk;
- Yayla, Paşa;
- Turkmen, Halit Suleyman;
- Karaca Ugural, Burcu
Publication type:
Article
Improved dispersion of reduced graphene oxide in benzoxazine composites via electrostatic interaction with M‐cresol.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3544, doi. 10.1002/pc.27343
By:
- Du, Jie;
- Li, Shuiquan;
- Wang, Meichen;
- Liu, Huihui;
- Wang, Yan;
- Song, Ping;
- Wang, Zhi
Publication type:
Article
Thermal conduction network constructed by boron nitride core–shell structure with loading on silver particles.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3535, doi. 10.1002/pc.27342
By:
- Qin, Sijie;
- Weng, Ling;
- Sun, Xiaohang;
- Yu, Xin;
- Guan, Lizhu;
- Wu, Zijian
Publication type:
Article
Preparation of carbon black/graphene nanosheets/PP composites with 3D separated conductive networks based on selective laser sintering.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3522, doi. 10.1002/pc.27341
By:
- Shen, Hui;
- Wu, Wei;
- Hu, Huanbo;
- Rui, Zhengguo;
- Ye, Junjian;
- Zhang, Cheng
Publication type:
Article
Properties of basalt/aramid fiber reinforced hybrid composites compared to carbon fiber composites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3509, doi. 10.1002/pc.27339
By:
- Çelik, Okan;
- Yaşar, Abdulkadir;
- Karaçor, Berkay
Publication type:
Article
Advanced biodegradable thermoplastic elastomer/reduced graphene oxide nanocomposites by in situ compositing process.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3500, doi. 10.1002/pc.27338
By:
- Zhong, Runlian;
- Luan, Zhennan;
- Yan, Siwei;
- Cui, Quande;
- Zhu, Fuhao;
- Qi, Qianqian;
- Wang, Qingguo
Publication type:
Article
Influence of alkali treatment on the interfacial shear strength of Agave lechuguilla fiber and its significance as a reinforcing material in polymer composites for mechanical applications.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3487, doi. 10.1002/pc.27336
By:
- Majhi, Sudhakar;
- Pradhan, Subhrajit;
- Prakash, Ved;
- Acharya, Samir Kumar
Publication type:
Article
Preparation and properties of three‐dimensional boron nitride submicron tube/epoxy resin composites with high thermal conductivity.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3477, doi. 10.1002/pc.27335
By:
- Wang, Jilin;
- Li, Zhengde;
- Chen, Wenzhuo;
- Xuan, Weiping;
- Li, Wenbiao;
- Li, Shaofei;
- Ji, Yuchun;
- Zheng, Guoyuan;
- Long, Fei
Publication type:
Article
Effect of corn husk fiber length and diameter on load bearing, fatigue, and DMA properties of biosilica toughened epoxy composite.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3469, doi. 10.1002/pc.27334
By:
- K., Pratheesh;
- S. V., Gurupranes;
- Kumar, Aditya;
- P. Patil, Pravin
Publication type:
Article
Investigation on the bending behaviors of reinforced thermoplastic pipes using a strain energy equivalence method and a continuum damage numerical model.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3452, doi. 10.1002/pc.27333
By:
- Ding, Xindong;
- Liu, Wencheng;
- Wang, Shuqing;
- Bu, Jiarun
Publication type:
Article
Self‐healing study of impact damage in carbon fiber composites based on electrostatically spun polyacrylonitrile core–shell nanofibers.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3435, doi. 10.1002/pc.27332
By:
- Mao, Chi;
- Cai, Haopeng;
- Gan, Yu;
- Li, Mengzhi
Publication type:
Article
Effect of CNTs/nano‐TiO2 hybrid system on the drop‐weight impact response of Kevlar fiber/epoxy composites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3425, doi. 10.1002/pc.27331
By:
- Soltaninejad, Sareh;
- Tohidlou, Esmaeil;
- Khosravi, Hamed
Publication type:
Article
Investigating the synergistic effect of olive trunk leaves powder and pineapple leaf fibers on the physical, tensile, and thermal properties of epoxy‐based composites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3416, doi. 10.1002/pc.27330
By:
- Senthilkumar, K.;
- Chandrasekar, M.;
- Jawaid, Mohammad;
- Mahmoud, Mohamed H.;
- Fouad, Hassan;
- Santulli, Carlo;
- Zaki, Sheikh Ahmad
Publication type:
Article
Effect of partially reduced fullerenol‐graphene hybrid nanofiller on photophysical and super capacitance properties of fluorescence conducting polymer nanocomposites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3401, doi. 10.1002/pc.27329
By:
- Jaiswal, Rimpa;
- Saha, Uttam;
- Goswami, Thako Hari;
- Maji, Pradip K.
Publication type:
Article
High‐performance hierarchical composites based on polyamide 6, carbon fiber and graphene oxide.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3387, doi. 10.1002/pc.27328
By:
- Damacena, Luiz Henrique Cavalcante;
- Ferreira, Eder Henrique Coelho;
- Ribeiro, Hélio;
- Fechine, Guilhermino José Macedo;
- Souza, Adriana Martinelli Catelli
Publication type:
Article
In situ resin‐injection approach for repairing barely visible impact damaged carbon‐fiber reinforced epoxy laminates: Optimizing the repair parameters using Taguchi method.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3372, doi. 10.1002/pc.27327
By:
- Lai, W. L.;
- Saeedipour, H.;
- Wong, W. L. E.;
- Goh, K. L.
Publication type:
Article
Mechanical properties of carbon fiber/PPS laminates processed by hot compression molding under different consolidation cycles.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3358, doi. 10.1002/pc.27326
By:
- Montagna, Larissa Stieven;
- Morgado, Guilherme Ferreira de Melo;
- Marini, Juliano;
- Guimarães, Alessandro;
- Passador, Fabio Roberto;
- Rezende, Mirabel Cerqueira
Publication type:
Article
Effects of fabrication parameters on the mechanical properties of short basalt‐fiber‐reinforced thermoplastic composites for fused deposition modeling‐based 3D printing.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3341, doi. 10.1002/pc.27325
By:
- Hua, Luqing;
- Wang, Xin;
- Ding, Lining;
- Zeng, Siheng;
- Liu, Jianxun;
- Wu, Zhishen
Publication type:
Article
Characterization of moisture absorption and flexural performance of functionalized graphene modified carbon fiber composites under low energy impact.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3325, doi. 10.1002/pc.27324
By:
- Korkees, Feras;
- Morris, Elliot;
- Jarrett, William;
- Swart, Russo
Publication type:
Article
Enhanced electrical and electromagnetic interference shielding performance of immiscible poly(vinylidene chloride)/poly(lactic acid)/multi‐walled carbon nanotube composites via constructing filler‐wrapped porous structure.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3313, doi. 10.1002/pc.27323
By:
- Li, Yilong;
- Nie, Cong;
- Song, Danyang;
- Liu, Yujie;
- Jia, Yunchao;
- Zheng, Hongjuan
Publication type:
Article
Effect of bamboo particle blending system on the properties of its composites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3301, doi. 10.1002/pc.27322
By:
- Zhao, Wenjuan;
- Zhang, Wenfu;
- Zhang, Jian;
- Yuan, Shaofei;
- Chen, Hong
Publication type:
Article
The influence of fiber addition and different fabrication conditions in manufacturing plasma treated polyethylene/carbon fiber composites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3288, doi. 10.1002/pc.27320
By:
- Keerthiveettil Ramakrishnan, Sumesh;
- Spatenka, Petr;
- Vackova, Tatana
Publication type:
Article
Effect of silver nanoparticles on structural, thermal, electrical, and mechanical properties of poly(vinyl alcohol) polymer nanocomposites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3281, doi. 10.1002/pc.27319
By:
- Kareem, Aseel A.;
- Polu, Anji Reddy;
- Rasheed, Hussein Kh.;
- Alomayri, Thamer
Publication type:
Article
Frequency‐dependent dynamic moduli prediction for general bio‐inspired staggered platelet reinforced composites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3268, doi. 10.1002/pc.27318
By:
- Rao, Yanni;
- Wan, Wei;
- Wei, Ning;
- Wang, Kui
Publication type:
Article
Impact of electrical percolation on mechanical, thermal and flame properties of carbon filler‐epoxy composites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3255, doi. 10.1002/pc.27316
By:
- Rashmi;
- Poornima;
- Sundara Rajan, J.
Publication type:
Article
Tuning the micro‐structure, laser ignition, and isovolumetric burning performance of nitrocellulose propellant via incorporation of graphene oxide.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3245, doi. 10.1002/pc.27315
By:
- Xianrui, Shi;
- Chuandong, Luo;
- Lu, Tian;
- Ke, Zeng;
- Lingfeng, Yang;
- Chonghua, Pei
Publication type:
Article
Impact of fiber‐type and autoclave‐treatment at different temperatures on the mechanical properties and interface performance of various fiber‐reinforced 3D‐printed composites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3232, doi. 10.1002/pc.27314
By:
- Ali, Zeeshan;
- Yan, Yuekai;
- Mei, Hui;
- Cheng, Laifei;
- Zhang, Litong
Publication type:
Article
ZnO nanowire‐decorated Al2O3/graphene aerogel for improving the thermal conductivity of epoxy composites.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3221, doi. 10.1002/pc.27313
By:
- Lu, Zijian;
- Wu, Wei;
- Drummer, Dietmar;
- Wang, Yi;
- Liu, Chao;
- Li, Shuo;
- Zhao, Xintong
Publication type:
Article
Effect of meso‐structure characteristics on surface emissivity of 2.5D Woven ablative composite for thermal protection.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3209, doi. 10.1002/pc.27312
By:
- Liang, Haoran;
- Li, Weijie;
- Wang, Liyan;
- Yang, Guang
Publication type:
Article
Experimental investigation on mechanical behaviors of composite sandwich panels with a hybrid facesheet.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3196, doi. 10.1002/pc.27311
By:
- Zhu, Shuhua;
- Wang, Yuequan;
- Zhou, Long;
- Yi, Wentao;
- Hu, Li;
- Liu, Jian;
- Kang, Xinran;
- Li, Hongshuang
Publication type:
Article
Characterization of the tensile behavior of continuous carbon fiber reinforced polyamide 6 under self‐resistance electrical heating.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3185, doi. 10.1002/pc.27310
By:
- Xie, Yuxuan;
- Zhai, Zhanyu;
- Liu, Yunhuan
Publication type:
Article
Investigation of charge dynamics in the corona‐aged silicone rubber alumina nanocomposite.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3169, doi. 10.1002/pc.27309
By:
- Thangabalan, B.;
- Sarathi, R.;
- Harid, N.;
- Griffiths, H.
Publication type:
Article
Analysis of tensile damage characteristics of single filled bolt hole in laminate.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3153, doi. 10.1002/pc.27308
By:
- Zhang, Fa;
- Zhang, Huanshi;
- Pan, Zhongxiang;
- Liu, Meina;
- Liu, Tierang;
- Wan, Yumin
Publication type:
Article
Energy absorption and collapse behavior of PP‐based pin‐reinforced composite sandwich panels under quasi‐static flatwise compression loading.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3139, doi. 10.1002/pc.27307
By:
- Pedram, Ehsan;
- Ahmadi, Hamed;
- Kabiri, Ali;
- Choobar, Mehran Ghalami;
- Razmkhah, Omid;
- Fellows, Neil;
- Liaghat, Gholamhossein
Publication type:
Article
Robust polyamide 66 composites with hybrid fillers for thermal management and electromagnetic shielding.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3126, doi. 10.1002/pc.27306
By:
- Wu, Bozhen;
- Yang, Yuhao;
- Zhu, Kaiqi;
- Liu, Shengyang;
- Liu, Renrong;
- Zhu, Honghao;
- Li, Yulin
Publication type:
Article
An adaptive activation energy method for predicting resin curing behavior and thermal overshoot in thick CFRP plates.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3106, doi. 10.1002/pc.27305
By:
- Chen, Qisen;
- Ye, Yaoyao;
- Li, Hao;
- Zhang, Fan;
- Xu, Qiang;
- Song, Xiaowen;
- Ke, Yinglin
Publication type:
Article
Healable carbon fiber reinforced epoxy composites: Synchronous healing of matrix and interface damage.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3095, doi. 10.1002/pc.27304
By:
- Xu, Xirong;
- Yuan, Weihao;
- Liu, Pengxiang;
- Liu, Li;
- Huang, Yudong;
- Hu, Zhen
Publication type:
Article
Laser assisted rapid 3D printing of continuous carbon fiber reinforced plastics: Simulation, characterization, and properties.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3084, doi. 10.1002/pc.27303
By:
- Yiwen, Tu;
- Yuegang, Tan;
- Fan, Zhang;
- Jun, Zhang
Publication type:
Article
Low‐velocity impact response and damage tolerance of hybrid biaxial/triaxial braided composite laminates.
Published in:
Polymer Composites, 2023, v. 44, n. 6, p. 3068, doi. 10.1002/pc.27302
By:
- Wu, Zhenyu;
- Wang, Kang;
- Shi, Lin;
- Cheng, Xiaoying;
- Yuan, Yanhong
Publication type:
Article