Works matching IS 02728397 AND DT 2023 AND VI 44 AND IP 5

Results: 34

Infiltration monitoring using carbon nanotube buckypaper for the characterization of out‐of‐plane unsaturated permeability.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 3020, doi. 10.1002/pc.27299
By:
- Zhang, Jiaxing;
- Zhang, Wei;
- Wang, Shaokai;
- Xing, Fei;
- Gu, Yizhuo;
- Wang, Yanjie;
- Li, Min
Publication type:
Article
Experimental research on the high‐temperature compression mechanical properties of carbon/phenolic composites in rapid carbonization conditions.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 3007, doi. 10.1002/pc.27298
By:
- Lin, Xiaochu;
- Yi, Fajun;
- Xie, Weihua;
- Xu, Chenghai;
- Meng, Songhe
Publication type:
Article
Nano‐mechanical approach to study the behavior of annealed nanodiamond reinforced epoxy nanocomposites.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2997, doi. 10.1002/pc.27297
By:
- Singh, Baljit;
- Mohanty, Akash
Publication type:
Article
Analysis of vibration characteristics based on variable‐angle hybrid laminates.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2988, doi. 10.1002/pc.27296
By:
- Sun, Ying;
- Yu, Xiao;
- Ren, Jiajun;
- Wang, Xianfeng;
- Xiao, Jun
Publication type:
Article
Polypropylene‐based nanocomposite with improved mechanical properties: Effect of cellulose nanofiber and polyrotaxane with partial miscibility.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2977, doi. 10.1002/pc.27295
By:
- Harada, Ko;
- Chu, Pinjung;
- Xu, Kai;
- Fujimori, Atsuhiro
Publication type:
Article
Enhancing thermal conductivity of epoxy composites via f‐BN@f‐MgO hybrid fillers assisted by hot pressing.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2966, doi. 10.1002/pc.27294
By:
- Wu, Xudong;
- Yu, Haojie;
- Wang, Li;
- Meng, Xingguang;
- Huang, Zhikun;
- Liu, Xiaowei;
- Gong, Xiaodan;
- Liu, Jinyi
Publication type:
Article
Monitoring and verification of micro‐strain generated inside the laminate subjected to thermal loading through fiber bragg grating sensors and classical laminate theory.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2956, doi. 10.1002/pc.27293
By:
- Yılmaz, Çağatay;
- Ali, Hafiz Qasim;
- Yıldız, Mehmet
Publication type:
Article
Comparison of mechanical properties of the Type 1 and Type 2 composite hydraulic cylinder designs: A numerical study.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2941, doi. 10.1002/pc.27292
By:
- Coskun, Taner;
- Sahin, Omer Sinan
Publication type:
Article
A statistical approach to predict fatigue failure of leaf springs manufactured with nanotube incorporated epoxy‐woven glass fiber composites.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2925, doi. 10.1002/pc.27291
By:
- Turan, Fatih;
- Gurkan, Koray;
- Guclu, Mehmet;
- Durmus, Ali;
- Taskin, Yener
Publication type:
Article
Carbon‐glass reinforced epoxy hybrid composites for crashworthy structural applications.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2910, doi. 10.1002/pc.27290
By:
- El Aal, Mohamed Ibrahim Abd;
- Awd Allah, Mahmoud M.;
- Abd El‐baky, Marwa A.
Publication type:
Article
High‐fidelity modeling of the braiding process for generating the realistic mesostructure of preforms in braided composites.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2898, doi. 10.1002/pc.27289
By:
- Li, Yiding;
- Yan, Shibo;
- Yan, Ying;
- Zhang, Weijie
Publication type:
Article
Aramid pulp modified with imidazolium ionic liquids as a potential replacement for carbon black in fluorinated rubber composites.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2887, doi. 10.1002/pc.27288
By:
- Kerche, Eduardo Fischer;
- Demétrio da Silva, Vinícius;
- da Cruz, Joziel Aparecido;
- Lazzari, Lídia Kunz;
- Neves, Roberta Motta;
- Ornaghi, Heitor Luiz
Publication type:
Article
Transverse fatigue behavior analysis of symmetric and asymmetric glass fiber‐reinforced laminates.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2871, doi. 10.1002/pc.27287
By:
- Sharma, Nisha;
- Singh, Kalyan Kumar
Publication type:
Article
Tensile properties and failure mechanism of enhanced carbon nanotube/epoxy resin composite strips.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2860, doi. 10.1002/pc.27286
By:
- Yue, Chengming;
- Li, Huigai;
- Xu, Weihao;
- Zhang, Yan;
- Wang, Ping;
- Lyu, Weibang;
- Li, Yuanyuan
Publication type:
Article
Optimization of Charpy‐impact strength of 3D‐printed carbon fiber/polyamide composites by Taguchi method.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2846, doi. 10.1002/pc.27285
By:
- Beylergil, Bertan;
- Al‐Nadhari, Abdulrahman;
- Yildiz, Mehmet
Publication type:
Article
Three‐dimensional graphene/carbon nanotube electromagnetic shielding composite material based on melamine resin foam template.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2836, doi. 10.1002/pc.27284
By:
- Song, Jinwei;
- Xu, Kangjun;
- He, Jie;
- Ye, Huijian;
- Xu, Lixin
Publication type:
Article
Distinct strategy for the improvement of conductivity and electromagnetic shielding properties of MWCNTs/PLA/PBS composites: Synergistic effects of double percolation structure and UV aging.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2816, doi. 10.1002/pc.27283
By:
- Jia, Shikui;
- Yan, Zongying;
- Zhu, Yan;
- Zhang, Qifeng;
- Zhang, Xiangyang;
- Coates, Phil;
- Liu, Wei;
- Zhao, Zhongguo
Publication type:
Article
Effect of silicon dioxide and organized montmorillonite on the crystalline morphology and dielectric properties of polypropylene‐based composites.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2804, doi. 10.1002/pc.27281
By:
- Gao, Junguo;
- Ju, Huicheng;
- Yao, Ziheng;
- Zhang, Guangwei;
- Liu, Yanli;
- Niu, Jicheng
Publication type:
Article
Synthesis and characterization of novel epoxy‐urethane coating and its graphene nanocomposites.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2794, doi. 10.1002/pc.27280
By:
- Hosseini, Seyedeh Razieh;
- Alavi Nikje, Mir Mohammad
Publication type:
Article
An investigation on Moringa oleifera fruit (drumstick)‐derived cellulose micro and nanofiber reinforced styrene butadiene rubber composites.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2778, doi. 10.1002/pc.27279
By:
- Koley, Riya;
- Ghorai, Uttam Kumar;
- Chattopadhyay, Santanu;
- Bhowmick, Anil K.
Publication type:
Article
Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2766, doi. 10.1002/pc.27278
By:
- Li, Min;
- Xing, Fei;
- Li, Tianshu;
- Wang, Shaokai;
- Gu, Yizhuo;
- Zhang, Wei;
- Wang, Yanjie;
- Li, Qinghui
Publication type:
Article
Zero‐temperature‐coefficient of capacitance in BaTiO3/PI composite films using paraffin as barrier layer.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2757, doi. 10.1002/pc.27277
By:
- Pu, Linyu;
- Li, Yu;
- Tang, Jingyuan;
- Long, Yiting;
- Wang, Wei;
- Dai, Yatang;
- Huang, Xu
Publication type:
Article
Thermoelectric properties of polyvinylpyrrolidone/polyaniline‐mixed Bi2Te3 composites prepared by electrospinning.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2745, doi. 10.1002/pc.27276
By:
- Khan, Jan Sher;
- Akram, Rizwan;
- Hussain, Mozaffar;
- Rafique, Saima;
- Kayani, Farrukh Bashir;
- Rehman, Anis ur
Publication type:
Article
A thermal conductivity computation model of the carbon fiber reinforced polymer/aramid fiber reinforced polymer laminate considering the bi‐material composite interfaces.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2735, doi. 10.1002/pc.27275
By:
- Bao, Yongjie;
- Ma, Yuxin;
- Zheng, Zhi;
- Yang, Yuxing;
- Ji, Xiukun
Publication type:
Article
A comprehensive review on plant‐based natural fiber reinforced polymer composites: Fabrication, properties, and applications.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2598, doi. 10.1002/pc.27274
By:
- Akhil, U. V.;
- Radhika, N.;
- Saleh, Bassiouny;
- Aravind Krishna, S.;
- Noble, Niveditha;
- Rajeshkumar, L.
Publication type:
Article
Investigating the use of natural hollow fibers from common milkweed to improve the mechanical and thermal properties of epoxy resin.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2723, doi. 10.1002/pc.27273
By:
- Sanchez‐Diaz, Simon;
- Ouellet, Carl;
- Elkoun, Saïd;
- Robert, Mathieu
Publication type:
Article
Wood‐framed binary eutectic polyethylene glycol (BEPEG) as phase change materials for thermal storage.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2710, doi. 10.1002/pc.27272
By:
- Wang, Yan;
- Zhang, Wenliang;
- Cao, Jinzhen
Publication type:
Article
Identification of micro‐failure processes of HDPE‐henequen fiber composite material by using acoustic emission monitoring: Effect of fiber surface modification.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2697, doi. 10.1002/pc.27271
By:
- Anaya‐Ramirez, Roberto Carlos;
- Rios‐Soberanis, Carlos Rolando;
- Herrera‐Franco, Pedro Jesus
Publication type:
Article
Effect of graphene and MXene as 2D filler material on physico‐mechanical properties of hemp/E‐glass fibers reinforced hybrid composite: A comparative study.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2685, doi. 10.1002/pc.27270
By:
- Priyadarshini, Saigeeta;
- Soren, Shatrughan;
- Durga, Geeta
Publication type:
Article
Residual compressive strength of polyamide fiber‐reinforced epoxy composites after low‐velocity impact.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2671, doi. 10.1002/pc.27269
By:
- Coskun, Taner;
- Yar, Adem;
- Demir, Okan;
- Sahin, Omer Sinan
Publication type:
Article
A comprehensive investigation of drilling performance of anisotropic stacked glass‐carbon fiber reinforced hybrid laminate composites.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2656, doi. 10.1002/pc.27268
By:
- Ergene, Berkay;
- Bolat, Cagin;
- Karakilinc, Ucan;
- Irez, Alaeddin Burak
Publication type:
Article
Tensile behavior of the bolt‐jointed GFRP after low‐velocity impact.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2645, doi. 10.1002/pc.27267
By:
- Wan, Yun;
- Lu, Wenbin;
- Li, Hao;
- Huang, Yonghu;
- Lei, Zuxiang;
- Yang, Bin
Publication type:
Article
Zein/hydroxypropylcellulose biofilms with hydrophilic and hydrophobic montmorillonite clays.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2634, doi. 10.1002/pc.27266
By:
- Ulrich, Gabriella D.;
- Lemos, Ana G.;
- Silva‐Alvarez, Amanda C. F.;
- Paiva, Lucilene B.;
- Gavioli, Renato R.;
- da Silva, Lucimara L.;
- de Freitas, Osvaldo;
- Francisco, Kelly R.
Publication type:
Article
Issue Information.
Published in:
Polymer Composites, 2023, v. 44, n. 5, p. 2593, doi. 10.1002/pc.26743
Publication type:
Article

Works matching IS 02728397 AND DT 2023 AND VI 44 AND IP 5

Infiltration monitoring using carbon nanotube buckypaper for the characterization of out‐of‐plane unsaturated permeability.

Experimental research on the high‐temperature compression mechanical properties of carbon/phenolic composites in rapid carbonization conditions.

Nano‐mechanical approach to study the behavior of annealed nanodiamond reinforced epoxy nanocomposites.

Analysis of vibration characteristics based on variable‐angle hybrid laminates.

Polypropylene‐based nanocomposite with improved mechanical properties: Effect of cellulose nanofiber and polyrotaxane with partial miscibility.

Enhancing thermal conductivity of epoxy composites via f‐BN@f‐MgO hybrid fillers assisted by hot pressing.

Monitoring and verification of micro‐strain generated inside the laminate subjected to thermal loading through fiber bragg grating sensors and classical laminate theory.

Comparison of mechanical properties of the Type 1 and Type 2 composite hydraulic cylinder designs: A numerical study.

A statistical approach to predict fatigue failure of leaf springs manufactured with nanotube incorporated epoxy‐woven glass fiber composites.

Carbon‐glass reinforced epoxy hybrid composites for crashworthy structural applications.

High‐fidelity modeling of the braiding process for generating the realistic mesostructure of preforms in braided composites.

Aramid pulp modified with imidazolium ionic liquids as a potential replacement for carbon black in fluorinated rubber composites.

Transverse fatigue behavior analysis of symmetric and asymmetric glass fiber‐reinforced laminates.

Tensile properties and failure mechanism of enhanced carbon nanotube/epoxy resin composite strips.

Optimization of Charpy‐impact strength of 3D‐printed carbon fiber/polyamide composites by Taguchi method.

Three‐dimensional graphene/carbon nanotube electromagnetic shielding composite material based on melamine resin foam template.

Distinct strategy for the improvement of conductivity and electromagnetic shielding properties of MWCNTs/PLA/PBS composites: Synergistic effects of double percolation structure and UV aging.

Effect of silicon dioxide and organized montmorillonite on the crystalline morphology and dielectric properties of polypropylene‐based composites.

Synthesis and characterization of novel epoxy‐urethane coating and its graphene nanocomposites.

An investigation on Moringa oleifera fruit (drumstick)‐derived cellulose micro and nanofiber reinforced styrene butadiene rubber composites.

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites.

Zero‐temperature‐coefficient of capacitance in BaTiO<sub>3</sub>/PI composite films using paraffin as barrier layer.

Thermoelectric properties of polyvinylpyrrolidone/polyaniline‐mixed Bi<sub>2</sub>Te<sub>3</sub> composites prepared by electrospinning.

A thermal conductivity computation model of the carbon fiber reinforced polymer/aramid fiber reinforced polymer laminate considering the bi‐material composite interfaces.

A comprehensive review on plant‐based natural fiber reinforced polymer composites: Fabrication, properties, and applications.

Investigating the use of natural hollow fibers from common milkweed to improve the mechanical and thermal properties of epoxy resin.

Wood‐framed binary eutectic polyethylene glycol (BEPEG) as phase change materials for thermal storage.

Identification of micro‐failure processes of HDPE‐henequen fiber composite material by using acoustic emission monitoring: Effect of fiber surface modification.

Effect of graphene and MXene as 2D filler material on physico‐mechanical properties of hemp/E‐glass fibers reinforced hybrid composite: A comparative study.

Residual compressive strength of polyamide fiber‐reinforced epoxy composites after low‐velocity impact.

A comprehensive investigation of drilling performance of anisotropic stacked glass‐carbon fiber reinforced hybrid laminate composites.

Tensile behavior of the bolt‐jointed GFRP after low‐velocity impact.

Zein/hydroxypropylcellulose biofilms with hydrophilic and hydrophobic montmorillonite clays.

Issue Information.