Works matching IS 02728397 AND DT 2023 AND VI 44 AND IP 11

Results: 63

Crosslinking networks in epoxidized natural rubber/hemp hurd bio‐composites for the enhancement of thermal, mechanical, and water repellence properties.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8168, doi. 10.1002/pc.27697
By:
- Chen, Guowei;
- Adibi, Azin;
- Jubinville, Dylan;
- Mekonnen, Tizazu H.
Publication type:
Article
Solid epoxy prepregs with patterned resin distribution: Influence of pattern and process parameters on part quality in vacuum‐bag‐only processing.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8153, doi. 10.1002/pc.27696
By:
- Janzen, Jan Philipp;
- May, David
Publication type:
Article
Ultra‐high power density in poly(arylene ether nitrile)‐based composites containing barium titanate and boron nitride nanosheets.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8141, doi. 10.1002/pc.27694
By:
- Pu, Linyu;
- Zeng, Jingjing;
- Long, Yiting;
- Zhang, Huan;
- Huang, Xu;
- Liu, Jingsong
Publication type:
Article
Microstructure development and mechanical performance of MWCNTs/GNPs filled SEBS with different block content.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8125, doi. 10.1002/pc.27693
By:
- Alavi, Kosar;
- Tarashi, Sara;
- Nazockdast, Hossein;
- Rafizadeh, Mehdi
Publication type:
Article
Preparation and characterization of polyhydroxyamide composite fibers reinforced with carbon nanotubes—Experiment and computation collaborative approach.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8116, doi. 10.1002/pc.27692
By:
- Jee, Min Ho;
- Yeo, Moon Jin;
- Jang, Seung Soon;
- Baik, Doo Hyun
Publication type:
Article
Production and tribological performance under sliding contact conditions of zirconia and reduced graphene oxide loaded polymer nanocomposites for biomedical applications.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8097, doi. 10.1002/pc.27691
By:
- Singh, Devendra Kumar;
- Verma, Rajesh Kumar;
- Singh, Vinay Pratap;
- Mishra, Sanjay
Publication type:
Article
The evaluation of waste engine oil/old newspaper in recycled low density polyethylene composites.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8085, doi. 10.1002/pc.27690
By:
- Boran Torun, Sevda;
- Peşman, Emrah;
- Dönmez Çavdar, Ayfer
Publication type:
Article
Lubrication mechanism of polyimide/V2CTx MXene composites based on surface chemistry.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8075, doi. 10.1002/pc.27689
By:
- Jin, Lanyu;
- Wang, Xinrui;
- Huang, Yufei;
- Chen, Guojing;
- Pang, Haosheng;
- Yin, Xuan;
- Chai, Chunpeng
Publication type:
Article
Fabrication and characterization of epoxidized natural rubber nanocomposites reinforced with mercapto‐functionalized nanozirconia filler.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8063, doi. 10.1002/pc.27688
By:
- Toiserkani, Hojjat
Publication type:
Article
Preparation of novel hollow metal organic framework for enhancing flame retardancy of paraffin/EP thermal energy storage materials.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8049, doi. 10.1002/pc.27687
By:
- Wang, Xiu;
- Yan, Meiling;
- Yu, Jun;
- Luo, Weiang;
- Chen, Guorong
Publication type:
Article
Rolling preparation process and interface toughening mechanism of Al/CFRTP/Al composite laminates.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8037, doi. 10.1002/pc.27686
By:
- Wang, Aidong;
- Wang, Jian;
- Wang, Tao;
- Qiao, Tianqi;
- Xiong, Lang;
- Ding, Zijun;
- Wang, Chongyang
Publication type:
Article
Crashworthiness analysis and multi‐objective optimization of Al/CFRP hybrid tube with initial damage under transverse impact.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7953, doi. 10.1002/pc.27678
By:
- Cai, Weiwen;
- Ma, Qihua;
- Wang, Yazhe;
- Gan, Xuehui
Publication type:
Article
Heterostructured rGO/MoS2 to improve friction and wear performance of epoxy resins.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8010, doi. 10.1002/pc.27684
By:
- Song, Yun;
- Rong, Chengjun;
- Feng, Xing;
- Liu, Yujian;
- Zhang, Yan
Publication type:
Article
A unique coupling agent for elastomer nanocomposites with better carbon black dispersion for higher abrasion resistance and lower rolling resistance.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7997, doi. 10.1002/pc.27683
By:
- Gao, Jiaming;
- Xing, Yihao;
- An, Lu;
- Ye, Xin;
- Yao, Hong;
- Wang, Hong;
- Wu, Xiaohui;
- Zhang, Liqun
Publication type:
Article
Epoxy composites integrated with functionalized wet‐milled graphitic nanoparticles: Featuring enhanced mechanical performance and in‐plane fracture resistance.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7985, doi. 10.1002/pc.27681
By:
- Borah, Lakshi Nandan;
- Halder, Sudipta;
- Choudhury, Pannalal
Publication type:
Article
Preparation and performance of self‐healing nanocomposite coating with hydrophobic self‐cleaning ability.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7972, doi. 10.1002/pc.27680
By:
- Liu, Zhihao;
- Zhu, Shanshan;
- Zhang, Haiwei;
- Li, Wenyao;
- Jiang, Li;
- Zhou, Xing
Publication type:
Article
Enhancement of vibrational characteristics of rotating CFRP composite tapered plates reinforced by graphene nanoparticles.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 8021, doi. 10.1002/pc.27685
By:
- George, Manuel;
- Prasad, Mattipally;
- Selvaraj, Rajeshkumar;
- Sakthieswaran, N.;
- Sivakumar, J.;
- Al‐Mohaimeed, Amal M.;
- Chen, Tse‐Wei;
- Al‐Bahrani, Mohammed;
- Capangpangan, Rey Y.;
- Alguno, Arnold C.
Publication type:
Article
Thermal insulation and mechanical properties of carbon fiber‐reinforced thermoplastic polyphthalazine ether sulfone ketone composites reinforced by hollow glass beads.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7941, doi. 10.1002/pc.27677
By:
- Feng, Jingyao;
- Li, Nan;
- Wang, Bing;
- Cheng, Shan;
- Bao, Qingguang;
- Wang, Heming;
- Jian, Xigao
Publication type:
Article
Enhanced mechanical characteristics of polylactic acid/tamarind kernel filler green composite filament for 3D printing.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7925, doi. 10.1002/pc.27676
By:
- Nagarjun, J.;
- Kanchana, J.;
- Rajeshkumar, G.;
- Anto Dilip, A.
Publication type:
Article
Investigating the adhesion and rheological properties of metal organic framework incorporated polyester fiber/zeolite imidazolium salt framework‐67‐modified asphalt composite.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7907, doi. 10.1002/pc.27675
By:
- He, Lu;
- Ren, Denghui;
- Muhammad, Yaseen;
- Lai, Fang;
- Pei, Ruinan;
- Zhao, Zhenxia;
- Yang, Qingzhao;
- Li, Jing
Publication type:
Article
Impact of Mendong fiber–epoxy composite interface properties on electric field frequency exposure.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7895, doi. 10.1002/pc.27674
By:
- Suryanto, Heru;
- Irawan, Yudi Surya;
- Soenoko, Rudy;
- Binoj, Joseph Selvi;
- Osman, Azlin Fazlina;
- Osman, Hakimah;
- Maulana, Jibril;
- Ali, Alamry
Publication type:
Article
Enhanced mechanical properties of poly(vinyl chloride) using hexene‐doping graphitic nanoplatelets.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7887, doi. 10.1002/pc.27673
By:
- Yoon, Seo Jeong;
- Baek, Jaehoon;
- Baek, Jong‐Beom;
- Jeon, In‐Yup
Publication type:
Article
Evaluation of the performance of porous PBAT/modified zeolite composite materials for adsorption of Pb(II) ions from wastewater.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7876, doi. 10.1002/pc.27672
By:
- Zhan, Xiao;
- Sun, Junzhuo;
- Zhang, Daohai
Publication type:
Article
Preparing microcrystalline cellulose‐reinforced polylactic acid composites by an energy saving method.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7865, doi. 10.1002/pc.27671
By:
- Jia, Xue;
- Cui, Boyu;
- Li, Shuang;
- Xie, Hao;
- Wang, Weihong;
- Cui, Yutong;
- Ding, Jiayan;
- Zhang, Xianquan;
- Song, Yongming
Publication type:
Article
Mechanical and thermal properties of high volume‐fraction carbon nanotube/epoxy composites, and property enhancement by UV ozone treatment of carbon nanotubes.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7855, doi. 10.1002/pc.27670
By:
- Kamae, Toshiya;
- Drzal, Lawrence T.
Publication type:
Article
Quasi‐static axial crushing of multi‐tubular foam‐filled carbon fiber reinforced composite structures.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7843, doi. 10.1002/pc.27669
By:
- Khan, Tabrej;
- Alshahrani, Hassan;
- Abd‐Elaziem, Walaa;
- Umarfarooq, M. A.;
- Sebaey, Tamer A.
Publication type:
Article
Effects of anisotropy and off‐axis angle on buckling behavior of carbon/epoxy Z‐pin under axial pressure.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7817, doi. 10.1002/pc.27668
By:
- Lin, Chengxiang;
- Song, Xiaowen;
- Wang, Han;
- Cheng, Liang;
- Wang, Qing;
- Ke, Yinglin
Publication type:
Article
Piezoelectric properties of PVDF‐TrFE/BaTiO3 composite foams with different contents of TrFE units.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7804, doi. 10.1002/pc.27667
By:
- Kubin, Mateja;
- Makreski, Petre;
- Zanoni, Michele;
- Selleri, Giacomo;
- Gasperini, Leonardo;
- Fabiani, Davide;
- Gualandi, Chiara;
- Bužarovska, Aleksandra
Publication type:
Article
Effect of nanosilica on low‐velocity impact and compression after impact properties of continuous carbon fiber‐reinforced epoxy composites manufactured by 3D printing.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7794, doi. 10.1002/pc.27666
By:
- Wagmare, Rajkumar;
- Harshe, Rahul;
- Pednekar, Jaising;
- Patro, T. Umasankar;
- Joshi, Makarand
Publication type:
Article
Influence of moisture absorption on the compressive behavior of halloysite nanotube reinforced buoyant nanocomposite foams for maritime applications.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7783, doi. 10.1002/pc.27665
By:
- Bakshi, Mohammed Sohail;
- Kattimani, Subhaschandra
Publication type:
Article
Free vibration of co‐curing damping sandwich composites with different lay‐up angles.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7768, doi. 10.1002/pc.27664
By:
- Zheng, Changsheng;
- Zhou, Yunfa;
- Su, Jianmin;
- Sun, Pingping;
- Wang, Yanqin
Publication type:
Article
A coarse‐grained molecular dynamics study on the mechanical behavior of carbon nanotubes reinforced vulcanized natural rubber composites.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7752, doi. 10.1002/pc.27662
By:
- Cui, Jianzheng;
- Zeng, Fanlin;
- Wang, Youshan
Publication type:
Article
Unveiling new frontiers: Bast fiber‐reinforced polymer composites and their mechanical properties.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7317, doi. 10.1002/pc.27661
By:
- Syduzzaman, Md.;
- Hassan, Abir;
- Anik, Habibur Rahman;
- Tania, Imana Shahrin;
- Ferdous, Tabassum;
- Fahmi, Fahmida Faiza
Publication type:
Article
Design of 3D graphene‐Ni microsphere based polymeric composites for highly efficient and absorption‐dominated electromagnetic interference shielding performance.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7737, doi. 10.1002/pc.27660
By:
- Qiu, Lijuan;
- Ran, Linxin;
- Sun, Furong;
- Chen, Zhiyi;
- Yi, Longfei;
- Zhao, Lijuan;
- Ji, Xiaoying
Publication type:
Article
Research progress of composite cylindrical shells.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7298, doi. 10.1002/pc.27659
By:
- Zhang, Liwei;
- Zhao, Liyuan;
- Pan, Lin;
- Gao, Jiangang
Publication type:
Article
A study on the crystallization and melting of PLA nanocomposites with cellulose nanocrystals by DSC.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7727, doi. 10.1002/pc.27658
By:
- Kang, Homin;
- Kim, Dae Su
Publication type:
Article
The synergistic impacts of hybrid nanofillers of graphene nanoplatelets/carbon nanotubes on curing behavior of an epoxy‐vinyl ester interpenetrating polymer network nanocomposite coating.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7701, doi. 10.1002/pc.27657
By:
- Molaei, Afrooz;
- Jannesari, Ali
Publication type:
Article
Effect of 3D printing process parameters on the mechanical properties of silica/polyethyleneimine composites using direct‐ink writing.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7687, doi. 10.1002/pc.27656
By:
- Feng, Hui;
- Wang, Shuo;
- Cui, Yanjun;
- Xiang, Yongsheng;
- Liu, Xiaofei;
- Sun, Xiaoliang;
- Zhang, Wenli;
- Tu, Peng
Publication type:
Article
Three‐dimensional porous magnetic polyaniline supported Ag nanoparticles nanocomposites as an efficient and recyclable catalyst for nitrophenol reduction.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7674, doi. 10.1002/pc.27655
By:
- Huang, Huabo;
- Li, Cheng;
- Zhang, Qi;
- Huang, Juan;
- Ji, Jiayou;
- Liu, Yulan;
- Li, Liang
Publication type:
Article
Comparison of low‐velocity impact behavior of thick laminated composite structure with experimental and modeling technique.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7657, doi. 10.1002/pc.27654
By:
- Başoğlu, Furkan;
- Yakar, Ender Can;
- Bora, Mustafa Özgür;
- Tuna, Volkan
Publication type:
Article
Preparation and characterization of silk hybridizing carbon fiber/polybutylene succinate composite.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7643, doi. 10.1002/pc.27653
By:
- Zou, Ting;
- Ji, Ruyi;
- Li, Yuanyuan;
- Zhang, Yan;
- Wang, Ping
Publication type:
Article
Enhancing the foaming properties of polypropylene/basalt fiber composites by altering their rheological and crystallization behavior via polyethylene–octene blending modification.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7631, doi. 10.1002/pc.27650
By:
- Zhu, Nenggui;
- Shen, Chao;
- Zeng, Xiangbu;
- Li, Shengnan;
- Jiang, Tuanhui;
- Gong, Wei;
- He, Li
Publication type:
Article
Mutual dependence of experimental and data analysis features in characterization of fiber‐matrix interface via microdroplets.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7611, doi. 10.1002/pc.27649
By:
- Dsouza, Royson Donate;
- Di Vito, Donato;
- Jokinen, Jarno;
- Kanerva, Mikko
Publication type:
Article
Effect of mold on curing deformation of resin transfer molding‐made textile composites.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7599, doi. 10.1002/pc.27648
By:
- Zhang, Ce;
- Sun, Ying;
- Xu, Jing;
- Shi, Xiaoping;
- Zhang, Guoli
Publication type:
Article
Boron doped graphitic carbon nitride (BN‐g‐C3N4) and palm flower ash reinforced pyrimidinone core‐based polybenzoxazine composites for low‐k and high‐k applications.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7585, doi. 10.1002/pc.27647
By:
- Appasamy, Subasri;
- Kuppusamy, Arunachalam;
- Arumugam, Hariharan;
- Krishnasamy, Balaji;
- Muthukaruppan, Alagar
Publication type:
Article
Flexible polyaniline/MXene/CNF composite nanofibrous mats as high‐performance supercapacitor electrodes.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7571, doi. 10.1002/pc.27646
By:
- Donthula, Kiran;
- Malothu, Usha Rani;
- Araga, Ramya;
- Vooradi, Ramsagar;
- Patnaikuni, Venkata Suresh;
- Reddy, M. V.;
- Kakunuri, Manohar
Publication type:
Article
A systematic molecular dynamics study of the thermal conductivities of polyetherimide/graphene nanocomposites using response surface methodology.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7557, doi. 10.1002/pc.27645
By:
- Mansourian‐Tabaei, Mohammad;
- Jiang, Shan;
- Alkhateb, Hunain;
- Lopez, Alexander M.;
- Al‐Ostaz, Ahmed;
- Nouranian, Sasan
Publication type:
Article
Biodegradable and flexible fiber‐reinforced composite sheet from tannery solid wastes: An approach of waste minimization.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7545, doi. 10.1002/pc.27644
By:
- Ahmed, Hasan;
- Noyon, Md. Ashikur Rahaman;
- Uddin, Md. Elias;
- Jamal, Mamun;
- Palaniappan, Sathish Kumar
Publication type:
Article
Phosphorus‐containing hyperbranched polysiloxanes intercalated graphene oxide and their flame retardant effect on epoxy resin.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7457, doi. 10.1002/pc.27637
By:
- Zhang, Zhongzhou;
- Yin, Qichen;
- Liu, Yuhong
Publication type:
Article
Use of covalent dynamic networks as binders on epoxy‐based carbon fiber composites: Effect on properties, processing, and recyclability.
Published in:
Polymer Composites, 2023, v. 44, n. 11, p. 7444, doi. 10.1002/pc.27636
By:
- Vidal, Julio;
- Hornero, Carlos;
- Garcia, Ruth;
- Cuartero, Jesus;
- Beaucamp, Anne;
- Collins, Maurice N.;
- Garcia, Lidia;
- Ponce, David;
- Royo, Mari Carme;
- Sanchez, Elisabeth;
- Castell, Pere
Publication type:
Article