Works matching IS 02728397 AND DT 2022 AND VI 43 AND IP 5
Results: 65
Influence of graphene nanoplatelet concentration on the electrical, mechanical, and piezoresistive properties of glass fiber/epoxy composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3276, doi. 10.1002/pc.26616
- By:
- Publication type:
- Article
Recent developments and challenges in natural fiber composites: A review.
- Published in:
- 2022
- By:
- Publication type:
- Literature Review
Prominence of quantitative fiber loading on free vibration, damping behavior, inter‐laminar shear strength, fracture toughness, thermal conductivity, and flammability properties of jute–banana hybrid fiber phenol‐formaldehyde composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3313, doi. 10.1002/pc.26618
- By:
- Publication type:
- Article
Study on microstructure and tribological properties of hierarchical 3D braid applicable in heavy operating tribology conditions.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3290, doi. 10.1002/pc.26617
- By:
- Publication type:
- Article
Experimental investigation on the effect of geopolymer adhesive on the bond behavior between CFRP and concretes.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3259, doi. 10.1002/pc.26615
- By:
- Publication type:
- Article
An experimental investigation into the mechanical behavior of UHMWPE and basalt polyetherimide bonded composites at high strain rates.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3242, doi. 10.1002/pc.26614
- By:
- Publication type:
- Article
Z‐pin effect on interlaminar mechanical and ablation performance of quartz‐phenolic composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3228, doi. 10.1002/pc.26613
- By:
- Publication type:
- Article
Effect of poly ether ether ketone particles on v‐notched shear and drop weight impact behavior of carbon/epoxy composite.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3219, doi. 10.1002/pc.26612
- By:
- Publication type:
- Article
A spatial distribution effect of almond shell bio filler on physical, mechanical, thermal deflection and water absorption properties of vinyl ester polymer composite.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3204, doi. 10.1002/pc.26611
- By:
- Publication type:
- Article
Effect of biomass‐biochar content on the erosion wear performance of biochar epoxy composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3189, doi. 10.1002/pc.26610
- By:
- Publication type:
- Article
Digital light processing mediated 3D printing of biocomposite bone scaffolds: Physico‐chemical interactions and in‐vitro biocompatibility.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3175, doi. 10.1002/pc.26609
- By:
- Publication type:
- Article
Improving the thermal properties of olive/bamboo fiber‐based epoxy hybrid composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3167, doi. 10.1002/pc.26608
- By:
- Publication type:
- Article
Fatigue behavior and modeling of chopped carbon fiber reinforced sheet molding compound composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3150, doi. 10.1002/pc.26607
- By:
- Publication type:
- Article
Modeling analysis of elastic properties of graphene‐carbon nanotube (G‐C) reinforced composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3136, doi. 10.1002/pc.26606
- By:
- Publication type:
- Article
Toughening and rapid self‐healing for carbon fiber/epoxy composites based on electrospinning thermoplastic polyamide nanofiber.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3124, doi. 10.1002/pc.26605
- By:
- Publication type:
- Article
Application of polyfunctional nanomaterials for 3D printing.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3116, doi. 10.1002/pc.26604
- By:
- Publication type:
- Article
Influence of contact friction on mechanical properties of pre‐tightened teeth connection.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3104, doi. 10.1002/pc.26603
- By:
- Publication type:
- Article
Novel of (PLA/PCL blend)/Gd<sub>2</sub>O<sub>3</sub> rare earth oxide nanocomposites: Shape memory effect, thermal, magnetic, and mechanical properties.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3096, doi. 10.1002/pc.26602
- By:
- Publication type:
- Article
Effects of midplane carbon nanotube sheet interleave on the strength and impact damage resistance of carbon fiber reinforced polymer composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3085, doi. 10.1002/pc.26601
- By:
- Publication type:
- Article
Investigation on the dynamic behavior of composite gradient double‐arrow auxetic structure under local impact load.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3068, doi. 10.1002/pc.26600
- By:
- Publication type:
- Article
Experimental and numerical study of the behavior of epoxy foam‐filled 3D woven spacer composites under bending load.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3057, doi. 10.1002/pc.26599
- By:
- Publication type:
- Article
Synergetic impacts of two rigid nano‐scale inclusions on the mechanical and thermal performance of POM/carbon black/CaCO<sub>3</sub> ternary nanocomposite systems.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3041, doi. 10.1002/pc.26598
- By:
- Publication type:
- Article
Tribological behavior of zinc oxide‐hydroxyapatite particulates filled dental restorative composite materials.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3029, doi. 10.1002/pc.26597
- By:
- Publication type:
- Article
Suitability examination of a new cellulosic fiber extracted from the stem of Ventilago maderaspatana plant as polymer composite reinforcement.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3015, doi. 10.1002/pc.26596
- By:
- Publication type:
- Article
Hybrid materials for electromagnetic shielding: A review.
- Published in:
- 2022
- By:
- Publication type:
- Literature Review
Tribological and compressive creep properties of polytetrafluoroethylene/nickel‐titanium shape memory alloy composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 3003, doi. 10.1002/pc.26594
- By:
- Publication type:
- Article
Mode II interlaminar fracture toughness enhancement of fine z‐pin reinforced carbon fiber composite with low fraction of pins.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2992, doi. 10.1002/pc.26593
- By:
- Publication type:
- Article
Study on polyetheretherketone prepreg manufactured by aqueous system of powder impregnation.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2980, doi. 10.1002/pc.26592
- By:
- Publication type:
- Article
Electrically conductive nanocomposites produced by in situ polymerization of pyrrole in pre‐vulcanized natural rubber latex.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2972, doi. 10.1002/pc.26591
- By:
- Publication type:
- Article
Advanced Kolarik model for the modulus of a nanocomposite system reinforced by halloysite nanotubes and interphase zone.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2963, doi. 10.1002/pc.26590
- By:
- Publication type:
- Article
Higher strength carbon fiber lithium‐ion polymer battery embedded multifunctional composites for structural applications.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2952, doi. 10.1002/pc.26589
- By:
- Publication type:
- Article
Experimental investigations on thermal, flame retardant, and impact properties of additively manufactured continuous FRPC.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2941, doi. 10.1002/pc.26588
- By:
- Publication type:
- Article
Resin infusion process monitoring using graphene coated glass fabric sensors and infusible thermoplastic and thermoset matrices.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2924, doi. 10.1002/pc.26587
- By:
- Publication type:
- Article
Experimental investigation on physical, mechanical, and thermal properties of jute and hemp fibers reinforced hybrid polylactic acid composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2854, doi. 10.1002/pc.26581
- By:
- Publication type:
- Article
Enhanced ablation resistance of Divinyl‐POSS modified additional liquid silicone rubber and its fiber reinforced composite.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2896, doi. 10.1002/pc.26585
- By:
- Publication type:
- Article
Bamboo natural fiber and PAN fiber used as a reinforced brake friction material: Developed asbestos‐free brake pads.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2888, doi. 10.1002/pc.26584
- By:
- Publication type:
- Article
A morphological and mechanical analysis of composites from modified bagasse fibers and recycled polyvinyl chloride.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2878, doi. 10.1002/pc.26583
- By:
- Publication type:
- Article
Flexural damage and failure behavior of 3D printed continuous fiber composites by complementary nondestructive testing technology.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2864, doi. 10.1002/pc.26582
- By:
- Publication type:
- Article
Mechanical behavior and damage kinetics of a unidirectional carbon/epoxy laminated composite under dynamic compressive loading.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2909, doi. 10.1002/pc.26586
- By:
- Publication type:
- Article
Utilization of discarded Cymbopogon flexuosus root waste as a novel lignocellulosic fiber for lightweight polymer composite application.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2838, doi. 10.1002/pc.26580
- By:
- Publication type:
- Article
Study on friction and wear of preform Z‐directional fiber.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2779, doi. 10.1002/pc.26574
- By:
- Publication type:
- Article
The influence of fabric architecture on impregnation behavior and void formation: Artificial neural network and statistical‐based analysis.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2812, doi. 10.1002/pc.26578
- By:
- Publication type:
- Article
Carbon fiber/polyetherketoneketone composites. Part I: An ideal and uniform composition via solution‐based processing.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2803, doi. 10.1002/pc.26577
- By:
- Publication type:
- Article
Structural, electrical, and electromagnetic shielding properties of nanocarbon‐coated glass fiber‐reinforced polypropylene.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2796, doi. 10.1002/pc.26576
- By:
- Publication type:
- Article
Thermoplastic matrix‐based composites produced by resin transfer molding: A review.
- Published in:
- 2022
- By:
- Publication type:
- Literature Review
Influence of silver nanoparticles on mechanical, thermal and antibacterial properties of poly (vinyl alcohol)/rice hull powder hybrid biocomposite films.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2824, doi. 10.1002/pc.26579
- By:
- Publication type:
- Article
Evaluation of impact, thermo‐physical properties, and morphology of cornhusk fiber‐reinforced polyester composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2771, doi. 10.1002/pc.26573
- By:
- Publication type:
- Article
Nonisothermal crystallization behavior and mechanical properties of poly(lactic acid)/ramie fiber biocomposites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2759, doi. 10.1002/pc.26572
- By:
- Publication type:
- Article
High‐strength wood‐based composites via laminated delignified wood veneers with different adhesive contents for structural applications.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2746, doi. 10.1002/pc.26571
- By:
- Publication type:
- Article
Thermal conductivity and mechanical properties enhancement of CF/PPBESK thermoplastic composites by introducing graphene.
- Published in:
- Polymer Composites, 2022, v. 43, n. 5, p. 2736, doi. 10.1002/pc.26570
- By:
- Publication type:
- Article