Works matching IS 02728397 AND DT 2022 AND VI 43 AND IP 3
Results: 56
Polymer‐based nanocomposites fabricated by microemulsion method.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1282, doi. 10.1002/pc.26504
- By:
- Publication type:
- Article
Comparison of mechanical properties and thermal stability of graphene‐based materials and halloysite nanotubes reinforced maleated polymer compatibilized polypropylene nanocomposites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1852, doi. 10.1002/pc.26503
- By:
- Publication type:
- Article
Anchoring modified polystyrene to boron nitride nanosheets as highly thermal conductive composites for heat dissipation.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1844, doi. 10.1002/pc.26502
- By:
- Publication type:
- Article
Fabrication of thermal conductivity enhanced polymer composites with three‐dimensional networks based on natural cotton.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1832, doi. 10.1002/pc.26501
- By:
- Publication type:
- Article
Degradation of wheat straw/polylactic acid composites by Aspergillus niger.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1823, doi. 10.1002/pc.26500
- By:
- Publication type:
- Article
Effect of weave pattern on high strain rate performance of glass/polytetrafluoroethylene composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1809, doi. 10.1002/pc.26499
- By:
- Publication type:
- Article
Experimental investigation and molecular dynamics simulations of plasma treatment on the interface strength of overmolded hybrid fiber reinforced polypropylene composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1799, doi. 10.1002/pc.26498
- By:
- Publication type:
- Article
Plasma treatment application to improve interfacial adhesion in polypropylene‐flax fabric composite laminates.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1787, doi. 10.1002/pc.26497
- By:
- Publication type:
- Article
Effect of manufacturing processes and multi‐walled carbon nanotube loading on mechanical and dynamic properties of glass fiber reinforced composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1772, doi. 10.1002/pc.26496
- By:
- Publication type:
- Article
Evaluation of mechanical, thermal and morphological properties of corn husk modified pumice powder reinforced polyester composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1763, doi. 10.1002/pc.26495
- By:
- Publication type:
- Article
Prediction of curing process for thermosetting prepreg compression molding process based on machine learning.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1749, doi. 10.1002/pc.26494
- By:
- Publication type:
- Article
Direct measurement of axial compressive strength of carbon fibers using multifilament method.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1742, doi. 10.1002/pc.26493
- By:
- Publication type:
- Article
Investigations on tensile and flexural behaviors of sugarcane fiber/boron nitride/fly ash reinforced polymer matrix composite.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1730, doi. 10.1002/pc.26492
- By:
- Publication type:
- Article
An electric‐driven variable stiffness morphing skin: Preparation and properties.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1718, doi. 10.1002/pc.26491
- By:
- Publication type:
- Article
Constructing three‐dimensional boron nitride network for highly thermally conductive epoxy resin composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1711, doi. 10.1002/pc.26490
- By:
- Publication type:
- Article
Development of PPTA/cellulose three‐layer composite insulating paper with low dielectric constant and good mechanical strength based on molecular dynamics simulation.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1698, doi. 10.1002/pc.26489
- By:
- Publication type:
- Article
Synergistic effect of polyurethane‐coated carbon fiber and electron beam irradiation on the thermal/mechanical properties and long‐term durability of polyamide‐based thermoplastic composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1685, doi. 10.1002/pc.26488
- By:
- Publication type:
- Article
Synthesis, characterization, and properties of silicone grafted epoxy/acrylonitrile butadiene styrene/graphene oxide nanocomposite with high adhesion strength and thermal stability.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1665, doi. 10.1002/pc.26487
- By:
- Publication type:
- Article
Fiber contribution on elastic properties of cellulose composites: A multiscale numerical study.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1656, doi. 10.1002/pc.26486
- By:
- Publication type:
- Article
Design and characterization of high‐performance epoxy adhesive with block copolymer and alumina nanoparticles in aluminum‐aluminum bonded joints: Mechanical properties, lap shear strength, and thermal stability.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1637, doi. 10.1002/pc.26485
- By:
- Publication type:
- Article
Study on cutting force and induced thermal damage of carbon fiber reinforced polymer composites using microscopic simulation modeling.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1626, doi. 10.1002/pc.26484
- By:
- Publication type:
- Article
A comprehensive review on polymer composites in railway applications.
- Published in:
- 2022
- By:
- Publication type:
- Literature Review
Thermal, morphological and mechanical properties of glass fiber reinforced star‐branched polyamide 6.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1617, doi. 10.1002/pc.26482
- By:
- Publication type:
- Article
Molecular dynamic simulation study of tribological mechanism of PI composites reinforced by CNTs with different orientations.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1557, doi. 10.1002/pc.26476
- By:
- Publication type:
- Article
In‐line residual strain monitoring for thermoplastic automated tape layup using fiber Bragg grating sensors.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1590, doi. 10.1002/pc.26480
- By:
- Publication type:
- Article
Impact of winding parameters on the fiber bandwidth in the cylindrical area of a hydrogen pressure vessel for generating a digital twin.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1577, doi. 10.1002/pc.26479
- By:
- Publication type:
- Article
A review on polyhedral oligomeric silsesquioxanes as a new multipurpose nanohybrid additive for poly(lactic acid) and poly(lactic acid) hybrid composites.
- Published in:
- 2022
- By:
- Publication type:
- Literature Review
Physical and mechanical properties of epoxy/Kota stone dust/fly ash hybrid composites for light duty structural applications.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1566, doi. 10.1002/pc.26477
- By:
- Publication type:
- Article
Free vibration optimization of a sandwich structure with a hybrid composite grid core.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1603, doi. 10.1002/pc.26481
- By:
- Publication type:
- Article
Evaluation of conductivity and mechanical properties of natural fiber reinforced soy‐melamine formaldehyde based green composite.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1546, doi. 10.1002/pc.26475
- By:
- Publication type:
- Article
Effect of stacking sequence and metal volume fraction on the ballistic impact behaviors of ARALL fiber‐metal laminates: An experimental study.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1536, doi. 10.1002/pc.26474
- By:
- Publication type:
- Article
Fabrication and characterization of micro alumina zirconia particulate filled dental restorative composite materials.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1526, doi. 10.1002/pc.26473
- By:
- Publication type:
- Article
Coconut waste fiber used as brake pad reinforcement polymer composite and compared to standard Kevlar‐based brake pads to produce an asbestos free brake friction material.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1518, doi. 10.1002/pc.26472
- By:
- Publication type:
- Article
Waste and natural fiber based automotive brake composite materials: Influence of slag and coir on tribological performance.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1508, doi. 10.1002/pc.26471
- By:
- Publication type:
- Article
Comments on "Essential work of fracture analysis for surface modified carbon fiber/polypropylene composites with different interfacial adhesion" [Polymer Composites 41 (9) (2020): 3541–3551].
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1505, doi. 10.1002/pc.26470
- By:
- Publication type:
- Article
Synthesis and modification of spherical SiO<sub>2</sub> nanoparticles with different particle sizes and morphologies and their effects on the properties of thermoplastic polyurethane urea elastomers.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1494, doi. 10.1002/pc.26469
- By:
- Publication type:
- Article
Durability of biopolymeric composites formulated with fillers from a by‐product of coffee roasting.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1485, doi. 10.1002/pc.26468
- By:
- Publication type:
- Article
A novel waterborne g‐CPP sizing agent for the interfacial enhancement of SCF/PP composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1476, doi. 10.1002/pc.26467
- By:
- Publication type:
- Article
Qualitative study on the effects of hydroxyl functionalized multiwall carbon nanotube and silica doped‐epoxy composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1462, doi. 10.1002/pc.26466
- By:
- Publication type:
- Article
Metal inserts for performance improvement in glass fiber‐reinforced polymer nanocomposite joints under accelerated aging conditions.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1448, doi. 10.1002/pc.26465
- By:
- Publication type:
- Article
Improving mechanical toughness and mold resistance of bamboo/high‐density polyethylene composites by pretreatment with the fungus Trametes versicolor.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1438, doi. 10.1002/pc.26464
- By:
- Publication type:
- Article
Effect of high content filling jute fiber with large aspect ratio on structure and properties of PLA composite.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1429, doi. 10.1002/pc.26463
- By:
- Publication type:
- Article
Characterization of interwoven roselle/sisal fiber reinforced epoxy composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1421, doi. 10.1002/pc.26462
- By:
- Publication type:
- Article
Fabrication of aluminum honeycomb cored carbon fabric/epoxy composite sandwich structures via vacuum assisted resin infusion technique.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1407, doi. 10.1002/pc.26461
- By:
- Publication type:
- Article
Vibrational analysis of glass/ramie fiber reinforced hybrid polymer composite.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1395, doi. 10.1002/pc.26460
- By:
- Publication type:
- Article
Erratum to: "Mechanical and thermal properties of fishbone‐based epoxy composites: The effects of thermal treatment" [Polymer Composites 2021; 42: 3 1224–1234] and Degradation analysis of epoxy resin composites reinforced with bioprotein: Effects of hydrolysis using papain and bromelain [Polymer Composites 2021; 42: 6 2717–2727]
- Published in:
- 2022
- Publication type:
- Correction Notice
Influence of surface morphology parameters of steel on tribological properties between glass‐fiber‐reinforced polytetrafluoroethylene composites and steel under dry‐friction and oil‐lubrication conditions.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1383, doi. 10.1002/pc.26456
- By:
- Publication type:
- Article
Acoustic performance of natural fiber reinforced polymer composites: Influencing factors, future scope, challenges, and applications.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1221, doi. 10.1002/pc.26455
- By:
- Publication type:
- Article
Covalent crosslinks turn natural Eucommia ulmoides gum/polybutene‐1 composites into multiple shape memory materials.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1371, doi. 10.1002/pc.26454
- By:
- Publication type:
- Article
Novel epoxy‐based glass fiber reinforced composites containing compatibilized para‐aramid fibers and silanized nanoclay for improved impact strength.
- Published in:
- Polymer Composites, 2022, v. 43, n. 3, p. 1357, doi. 10.1002/pc.26453
- By:
- Publication type:
- Article