Works matching IS 02728397 AND DT 2022 AND VI 43 AND IP 11
Results: 71
Comprehensive characterization of novel Robusta (AAA) banana bracts fibers reinforced polylactic acid based biocomposites for lightweight applications.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8569, doi. 10.1002/pc.27025
- By:
- Publication type:
- Article
Composite laminates made of unidirectional carbon fiber reinforced polymer interleaved with recycled carbon fiber and short virgin aramid fiber non‐woven mats for structural applications.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8560, doi. 10.1002/pc.27024
- Publication type:
- Article
Development of nanohybrid dental composite containing mesoporous carrier silica particles: Synthesis particles, determination of fluoride adsorption capacities, and addition of the composite.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8545, doi. 10.1002/pc.27023
- By:
- Publication type:
- Article
Thermal and mechanical characteristic investigation of the hybridization of basalt fiber with aramid fiber and carbon fiber.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8529, doi. 10.1002/pc.27022
- By:
- Publication type:
- Article
Microscale investigation on the carbon fiber surface physical properties and interfacial behavior of carbon fiber/polypropylene composites fabricated by self‐resistance electric heating technique.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8517, doi. 10.1002/pc.27021
- By:
- Publication type:
- Article
Modelling on stress redistribution around broken fibers for fiber reinforced plastic with poor fiber distribution uniformity.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8507, doi. 10.1002/pc.27020
- By:
- Publication type:
- Article
Experimental investigations for variability quantification of vibration response of short(−natural)‐fiber‐reinforced polypropylene.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8499, doi. 10.1002/pc.27019
- By:
- Publication type:
- Article
Investigation of the way to enhance the synergistic effect between polyimide and graphene on the tribological performance of polytetrafluoroethylene composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8426, doi. 10.1002/pc.27013
- By:
- Publication type:
- Article
A heat‐press‐treatment method for 3D printed thin‐walled composite structures with improved interfacial and compressive properties.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8471, doi. 10.1002/pc.27017
- By:
- Publication type:
- Article
Multi‐functional structural supercapacitor based on manganese oxide‐hydroxide nanowires modified carbon fiber fabric electrodes.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8458, doi. 10.1002/pc.27016
- By:
- Publication type:
- Article
Mechanical and tribological properties of carbon fiber‐reinforced polyetheretherketone composite coatings by flame‐spraying method.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8443, doi. 10.1002/pc.27015
- By:
- Publication type:
- Article
Simultaneously improve the mode II interlaminar fracture toughness, flexural properties, and impact strength of CFRP composites with short aramid fiber interlaminar toughening.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8437, doi. 10.1002/pc.27014
- By:
- Publication type:
- Article
Effects of functionalized graphene oxide modified sizing agent on the interfacial and mechanical properties of carbon fiber reinforced polyamide 6 composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8483, doi. 10.1002/pc.27018
- By:
- Publication type:
- Article
Poly(lactic acid) composites with few layer graphene produced by noncovalent chemistry.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8409, doi. 10.1002/pc.27012
- By:
- Publication type:
- Article
Effects of meso‐ and micro‐scale defects on hygrothermal aging behavior of glass fiber reinforced composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8396, doi. 10.1002/pc.27011
- By:
- Publication type:
- Article
Mechanical, fracture toughness, and Dynamic Mechanical properties of twill weaved bamboo fiber‐reinforced Artocarpus heterophyllus seed husk biochar epoxy composite.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8388, doi. 10.1002/pc.27010
- By:
- Publication type:
- Article
Role of carbonaceous fillers in electromagnetic interference shielding behavior of polymeric composites: A review.
- Published in:
- 2022
- By:
- Publication type:
- Literature Review
Low‐velocity impact response of halloysite nanotube reinforced glass/epoxy multi‐scale composite. Part 1: Dynamic loading performance.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8377, doi. 10.1002/pc.27008
- By:
- Publication type:
- Article
Effect of NdFeB particle size on the performance of 3D printed bonded magnets of polyamide‐based composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8368, doi. 10.1002/pc.27007
- By:
- Publication type:
- Article
Effect of GO agglomeration on the mechanical properties of graphene oxide and nylon 66 composites and micromechanical analysis.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8356, doi. 10.1002/pc.27006
- By:
- Publication type:
- Article
Assessment of a 3D ablation material response model for lightweight quartz fiber reinforced phenolic composite.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8341, doi. 10.1002/pc.27005
- By:
- Publication type:
- Article
The influence of induced holes on crashworthy ability of glass reinforced epoxy square tubes.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8322, doi. 10.1002/pc.27004
- By:
- Publication type:
- Article
Controlling resin flow in Liquid Composite Moulding processes through localized irradiation with ultraviolet light.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8308, doi. 10.1002/pc.27001
- By:
- Publication type:
- Article
Mechanical, absorption, and swelling properties of jute/kenaf/banana reinforced epoxy hybrid composites: Influence of various stacking sequences.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8297, doi. 10.1002/pc.26999
- By:
- Publication type:
- Article
Comprehensive characterization of AA 2024T3 fiber metal laminate with nanosilica‐reinforced epoxy based polymeric composite panel for lightweight applications.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8274, doi. 10.1002/pc.26998
- By:
- Publication type:
- Article
Development of eco‐friendly bio‐composite by reinforcing pineapple fruit waste crown fiber to ethylene‐propylene rubber modified polyethylene.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8259, doi. 10.1002/pc.26997
- By:
- Publication type:
- Article
Construction of soft polyurethane cushioning composites based on integral fabric air layer: Reaching new levels in compression and cushioning behaviors.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8250, doi. 10.1002/pc.26996
- By:
- Publication type:
- Article
Preliminary study of particleboards manufactured with pine cones and Eucalyptus globulus capsules with a bio‐based polyurethane adhesive.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8239, doi. 10.1002/pc.26995
- By:
- Publication type:
- Article
In situ assembled C<sub>3</sub>N<sub>4</sub>/SiO<sub>2</sub> nanohybrids for high comprehensive performance solution polymerized styrene‐butadiene rubber/butadiene rubber.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8228, doi. 10.1002/pc.26994
- By:
- Publication type:
- Article
The role of graphene nanoplatelets in the friction reducing process of polymer.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8213, doi. 10.1002/pc.26991
- By:
- Publication type:
- Article
Analysis of silica and silicon carbide abrasives characteristics on denim wear.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8202, doi. 10.1002/pc.26988
- By:
- Publication type:
- Article
Compaction behavior of 3D woven preforms with hybrid fibers and under different process parameters.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8192, doi. 10.1002/pc.26987
- By:
- Publication type:
- Article
In situ growth of ZnO on carbon nanospheres and its properties in natural rubber.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8181, doi. 10.1002/pc.26986
- By:
- Publication type:
- Article
Demystifying the role of graphene nanoplatelets percentage and sonication duration on the mechanical properties of the glass fabric/graphene nanoplatelets hybrid nano‐composite.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8170, doi. 10.1002/pc.26985
- By:
- Publication type:
- Article
Impact damage assessment in patch‐repaired carbon fiber‐reinforced polymer laminates using the nonlinear Lamb wave‐mixing technique.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8152, doi. 10.1002/pc.26984
- By:
- Publication type:
- Article
Low‐velocity impact damage and compression after impact behavior of CF/PEEK thermoplastic composite laminates.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8136, doi. 10.1002/pc.26983
- By:
- Publication type:
- Article
Comparative study on the mechanical and thermal properties of polycarbonate composites reinforced by KH570/SA/SDBS modified wollastonite fibers.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8125, doi. 10.1002/pc.26975
- By:
- Publication type:
- Article
In‐line measurement and characterization in glass bead‐filled polypropylene extrusion based on machine vision.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8116, doi. 10.1002/pc.26973
- By:
- Publication type:
- Article
Closed‐loop recycling of thermoset composites from electric motor assembly process into flexible polyurethane foams.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8105, doi. 10.1002/pc.26966
- By:
- Publication type:
- Article
Fabrication and properties of aluminum phosphate framework/bismaleimide composites with double‐crosslinking structures.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8095, doi. 10.1002/pc.26963
- By:
- Publication type:
- Article
Newly developed biocarbon to increase electrical conductivity in sustainable polyamide 12 composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8084, doi. 10.1002/pc.26953
- By:
- Publication type:
- Article
Fabrication and characterization of graphene oxide and glass fiber‐based hybrid epoxy composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8072, doi. 10.1002/pc.26952
- By:
- Publication type:
- Article
Finite element analysis of biaxial tensile mechanical properties and burst properties of woven fabric for layflat hose.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8060, doi. 10.1002/pc.26947
- By:
- Publication type:
- Article
Vertically interconnected network of graphene fluoride for highly thermoconductive and electrically insulating epoxy composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8050, doi. 10.1002/pc.26946
- By:
- Publication type:
- Article
Enhancing low velocity impact characteristics of glass fiber laminates by short fiber reinforcement—Failure evolution and damage mechanisms.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8030, doi. 10.1002/pc.26945
- By:
- Publication type:
- Article
Lightweight biodegradable hybrid composite sandwich panel under three‐point bending loads—Experimental and numerical.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 8007, doi. 10.1002/pc.26944
- By:
- Publication type:
- Article
Thermal buckling analysis of tapered laminated composite beam: Numerical and experimental investigation.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 7992, doi. 10.1002/pc.26941
- By:
- Publication type:
- Article
Study on progressive damage performance of basalt‐fiber wound composite tube.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 7977, doi. 10.1002/pc.26933
- By:
- Publication type:
- Article
Self‐lubrication and tribological properties of SBA‐15 as smart microcontainer and resin composites.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 7967, doi. 10.1002/pc.26932
- By:
- Publication type:
- Article
Nonlinear buckling of axially compressed FG‐GRCL stiffened cylindrical panels with a piezoelectric layer by using Reddy's higher‐order shear deformation theory.
- Published in:
- Polymer Composites, 2022, v. 43, n. 11, p. 7952, doi. 10.1002/pc.26931
- By:
- Publication type:
- Article