Works matching IS 02728397 AND DT 2016 AND VI 37 AND IP 1

Results: 36

Influence of Fiber Slippage Coefficient Distributions on the Geometry and Performance of Composite Pressure Vessels.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 315, doi. 10.1002/pc.23183
By:
- Zu, Lei;
- Wang, Jihui;
- Li, Shuxin
Publication type:
Article
Mechanical Properties of Defective Carbon Nanotube/ Polyethylene Nanocomposites: A Molecular Dynamics Simulation Study.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 305, doi. 10.1002/pc.23182
By:
- Islam, M. Zahabul;
- Mahboob, Monon;
- Lowe, Robert L.
Publication type:
Article
Impact of BaTiO3 as Insulative Ferroelectric Barrier on the Broadband Dielectric Properties of MWCNT/PVDF Nanocomposites.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 299, doi. 10.1002/pc.23181
By:
- Arjmand, Mohammad;
- Sundararaj, Uttandaraman
Publication type:
Article
Morphology and Viscoelastic Properties of Melt-Spun HDPE/Hydrotalcite Nanocomposite Fibers.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 288, doi. 10.1002/pc.23180
By:
- Fambri, Luca;
- Dabrowska, Izabela;
- Ferrara, Giuseppe;
- Pegoretti, Alessandro
Publication type:
Article
Synthesis and Physicochemical Studies of Jute and Glass Composites of Styrenated Vinyl Esters of Multifunctional Epoxy Resin Containing s-Triazine Ring.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 279, doi. 10.1002/pc.23179
By:
- Ghumara, Rizwan Y.;
- Adroja, Pooja P.;
- Parsania, Parsotam H.
Publication type:
Article
Three-Body Abrasive Wear Behavior of Short Jute Fiber Reinforced Epoxy Composites.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 270, doi. 10.1002/pc.23178
By:
- Mishra, Vivek;
- Biswas, Sandhyarani
Publication type:
Article
Bending Actuation and Charge Distribution Behavior of Polyurethane/Carbon Nanotube Electroactive Nanocomposites.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 262, doi. 10.1002/pc.23177
By:
- Melvin, Gan Jet Hong;
- Ni, Qing ‐ Qing;
- Natsuki, Toshiaki
Publication type:
Article
Effect of Sizing on Interfacial Adhesion of Commercial High Strength Carbon Fiber-Reinforced Resin Composites.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 254, doi. 10.1002/pc.23176
By:
- Wu, Qing;
- Li, Min;
- Gu, Yizhuo;
- Wang, Shaokai;
- Yao, Lirui;
- Zhang, Zuoguang
Publication type:
Article
Influence of Two Carbon Plies on Adhesion of Unidirectional Flax-Fibers Reinforced Epoxy Composites.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 241, doi. 10.1002/pc.23175
By:
- Karray, Mayssa;
- Triki, Asma;
- Poilâne, Christophe;
- Picart, Pascal;
- Gargouri, Mohamed
Publication type:
Article
An Improved Pull-Out Model for the Carbon Nanotube/Nanofiber-Reinforced Polymer Composites With Interfacial Defects.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 229, doi. 10.1002/pc.23174
By:
- Lu, Zixing;
- Chen, Mingyang;
- Yang, Zhenyu
Publication type:
Article
Statistics on the Fracture Strength of Bamboo Fibers.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 221, doi. 10.1002/pc.23173
By:
- Wang, Fang;
- Shao, Jiaxing;
- Li, Xue
Publication type:
Article
Injection Molded Noil Hemp Fiber Composites: Interfacial Shear Strength, Fiber Strength, and Aspect Ratio.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 313, doi. 10.1002/pc.23172
By:
- Etaati, Amir;
- Pather, Selvan;
- Cardona, Francisco;
- Wang, Hao
Publication type:
Article
Optically Transparent Polycarbonate/Clay Nanocomposites With Improved Performance Using Phosphonium Modified Organoclay: Preparation and Characterizations.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 199, doi. 10.1002/pc.23171
By:
- Suin, Supratim;
- Shrivastava, Nilesh K.;
- Maiti, Sandip;
- Khatua, Bhanu B.
Publication type:
Article
New Heat Resistant Nanocomposites Reinforced Silicate Nanolayers Containing Triazine Rings Based on Polyamide: Synthesis, Characterization, and Flame Retardancy Study.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 188, doi. 10.1002/pc.23170
By:
- Hajibeygi, Mohsen;
- Shabanian, Meisam;
- Khodaei ‐ Tehrani, Majid
Publication type:
Article
Preparation of Novel pH-Sensitive Nanocomposites Based on Ionic-Liquid Modified Montmorillonite for Colon Specific Drug Delivery System.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 182, doi. 10.1002/pc.23169
By:
- Mahkam, Mehrdad;
- Abbaszad Rafi, Abdolrahim;
- Mohammadzadeh Gheshlaghi, Leila
Publication type:
Article
Feather-Inspired Carbon Fiber Reinforced Polymers With Nanofibrous Fractal Interlayer.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 168, doi. 10.1002/pc.23168
By:
- Drakonakis, Vasileios M.;
- Velisaris, Chris N.;
- Seferis, James C.;
- Doumanidis, Charalabos C.
Publication type:
Article
Dielectric Properties of Multiwalled Carbon Nanotube/Clay/Polyvinylidene Fluoride Nanocomposites: Effect of Clay Incorporation.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 161, doi. 10.1002/pc.23167
By:
- Khajehpour, Maryam;
- Arjmand, Mohammad;
- Sundararaj, Uttandaraman
Publication type:
Article
Luminescent Cellulose Fibers Modified With Cerium Fluoride Doped With Terbium Particles.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 153, doi. 10.1002/pc.23166
By:
- Kulpinski, Piotr;
- Erdman, Aleksandra;
- Grzyb, Tomasz;
- Lis, Stefan
Publication type:
Article
The Temperature Dependence of the Coefficients of Thermal Expansion of Phenolic Resin.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 146, doi. 10.1002/pc.23165
By:
- Wang, Yong;
- Bian, Cheng;
- Cui, Jiajia;
- Jing, Xinli
Publication type:
Article
Synthesis, Chemical Resistance, and Water Absorption of Bamboo Fiber Reinforced Epoxy Composites.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 141, doi. 10.1002/pc.23164
By:
- Gupta, Anu
Publication type:
Article
Electrospinning of Poly(ε-caprolactone) Solutions Containing Graphene Oxide: Effects of Graphene Oxide Content and Oxidation Level.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 131, doi. 10.1002/pc.23163
By:
- Ramazani, Soghra;
- Karimi, Mohammad
Publication type:
Article
In Situ Preparation of Polyimide/Titanium Carbide Composites With Enhanced Dielectric Constant.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 125, doi. 10.1002/pc.23162
By:
- Weng, Ling;
- Xia, Qian ‐ shan;
- Yan, Li ‐ wen;
- Liu, Li ‐ zhu;
- Sun, Zhi
Publication type:
Article
Dielectric Properties of Epoxy/Montmorillonite Nanocomposites and Nanostructured Epoxy/SiO2/Montmorillonite Microcomposites.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 115, doi. 10.1002/pc.23161
By:
- Couderc, Hugues;
- Fréchette, Michel;
- David, Éric;
- Savoie, Sylvio;
- Guastavino, Francesco;
- Thelakkaday, Abdul Salam;
- Coletti, Gianfranco;
- Fina, Alberto
Publication type:
Article
Characterization of Dielectric Properties of Developed CdS-Gum Arabic Composites in Low Frequency Region.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 108, doi. 10.1002/pc.23160
By:
- Barik, P.;
- Bhattacharjee, A.;
- Roy, M.
Publication type:
Article
Effect of SiO2/EVA on the Mechanical Properties, Permeability, and Residual Solvent of Polypropylene Packaging Films.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 101, doi. 10.1002/pc.23159
By:
- Li, Dongli;
- Zhang, Jingyong;
- Xu, Wencai;
- Fu, Yabo
Publication type:
Article
Effects of Chemical Surface Pretreatment on Tensile Properties of a Single Glass Fiber and the Glass Fiber Reinforced Epoxy Composite.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 91, doi. 10.1002/pc.23158
By:
- Safi, Somayeh;
- Zadhoush, Ali;
- Masoomi, Mahmood
Publication type:
Article
Synthesis and Cytocompatibility of Collagen/Hydroxyapatite Nanocomposite Scaffold for Bone Tissue Engineering.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 81, doi. 10.1002/pc.23157
By:
- Chen, Li;
- Hu, Jingxiao;
- Ran, Jiabing;
- Shen, Xinyu;
- Tong, Hua
Publication type:
Article
Silver Nanoparticle Anchored With Novel Crosslinked Beaded Polystyrene/Polyamidoxime Sequential Interpenetrating Polymer Networks (IPNs) and its Antibacterial Activity.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 70, doi. 10.1002/pc.23156
By:
- Sharma, Saroj;
- Sharma, Chirag R.;
- Bhayani, Khushbu;
- Mishra, Sandhya
Publication type:
Article
Simulation of Percolation Threshold and Electrical Conductivity in Composites Filled With Conductive Particles: Effect of Polydisperse Particle Size Distribution.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 61, doi. 10.1002/pc.23155
By:
- Arenhart, R.G.;
- Barra, G.M.O.;
- Fernandes, C.P.
Publication type:
Article
Structural Characterization, Thermal Properties, and Density Functional Theory Studies of PMMA-Maghemite Hybrid Material.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 51, doi. 10.1002/pc.23154
By:
- Rocha, Marcus V.J.;
- Carvalho, Hudson W.P.;
- Sarmento, Victor H.V.;
- Craievich, Aldo F.;
- Ramalho, Teodorico C.
Publication type:
Article
Effect of Reduced Graphene Oxide Functionalization by Sulfanilic Acid on the Mechanical Properties of Poly(styrene-co-acrylonitrile)/Reduced Graphene Oxide Composites.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 44, doi. 10.1002/pc.23153
By:
- Vu, Thi Diem Tuyet;
- Pham, Viet Hung;
- Hur, Seung Hyun;
- Chung, Jin Suk
Publication type:
Article
Preparation, Characterization, and Properties of Silicate/Polyurethaneurea Composites Based on Dipropylene Glycol Dibenzoate.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 37, doi. 10.1002/pc.23152
By:
- Yang, Zhengpeng;
- Zhang, Wujun;
- Guan, Xuemao;
- Zhang, Chunjing
Publication type:
Article
Temperature-Induced Evolution of Micro-Morphology of Polyaniline Prepared by Gradually Adding Oxidants: Experiments and Mechanism.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 28, doi. 10.1002/pc.23151
By:
- Li, Benxiang;
- Liu, Dengyou
Publication type:
Article
Synthesis and Characterization of Poly(propylene carbonate)/Modified Sepiolite Nanocomposites.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 21, doi. 10.1002/pc.23150
By:
- Zheng, Fang;
- Mi, Qing Hua;
- Zhang, Kun;
- Xu, Jing
Publication type:
Article
Research on the Mechanical Properties Prediction of Carbon/Epoxy Composite Laminates With Different Void Contents.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 14, doi. 10.1002/pc.23149
By:
- Zhang, Aying;
- Lu, Haibao;
- Zhang, Dongxing
Publication type:
Article
Studies on Thermal, Mechanical, Morphological, and Viscoelastic Properties of Polybenzimidazole Fiber Reinforced High Density Polyethylene Composites.
Published in:
Polymer Composites, 2016, v. 37, n. 1, p. 5, doi. 10.1002/pc.23148
By:
- Faiz, Shan;
- Anis, Arfat;
- Luqman, Mohammad;
- Al Zahrani, Saeed M.
Publication type:
Article

Works matching IS 02728397 AND DT 2016 AND VI 37 AND IP 1

Influence of Fiber Slippage Coefficient Distributions on the Geometry and Performance of Composite Pressure Vessels.

Mechanical Properties of Defective Carbon Nanotube/ Polyethylene Nanocomposites: A Molecular Dynamics Simulation Study.

Impact of BaTiO<sub>3</sub> as Insulative Ferroelectric Barrier on the Broadband Dielectric Properties of MWCNT/PVDF Nanocomposites.

Morphology and Viscoelastic Properties of Melt-Spun HDPE/Hydrotalcite Nanocomposite Fibers.

Synthesis and Physicochemical Studies of Jute and Glass Composites of Styrenated Vinyl Esters of Multifunctional Epoxy Resin Containing s-Triazine Ring.

Three-Body Abrasive Wear Behavior of Short Jute Fiber Reinforced Epoxy Composites.

Bending Actuation and Charge Distribution Behavior of Polyurethane/Carbon Nanotube Electroactive Nanocomposites.

Effect of Sizing on Interfacial Adhesion of Commercial High Strength Carbon Fiber-Reinforced Resin Composites.

Influence of Two Carbon Plies on Adhesion of Unidirectional Flax-Fibers Reinforced Epoxy Composites.

An Improved Pull-Out Model for the Carbon Nanotube/Nanofiber-Reinforced Polymer Composites With Interfacial Defects.

Statistics on the Fracture Strength of Bamboo Fibers.

Injection Molded Noil Hemp Fiber Composites: Interfacial Shear Strength, Fiber Strength, and Aspect Ratio.

Optically Transparent Polycarbonate/Clay Nanocomposites With Improved Performance Using Phosphonium Modified Organoclay: Preparation and Characterizations.

New Heat Resistant Nanocomposites Reinforced Silicate Nanolayers Containing Triazine Rings Based on Polyamide: Synthesis, Characterization, and Flame Retardancy Study.

Preparation of Novel pH-Sensitive Nanocomposites Based on Ionic-Liquid Modified Montmorillonite for Colon Specific Drug Delivery System.

Feather-Inspired Carbon Fiber Reinforced Polymers With Nanofibrous Fractal Interlayer.

Dielectric Properties of Multiwalled Carbon Nanotube/Clay/Polyvinylidene Fluoride Nanocomposites: Effect of Clay Incorporation.

Luminescent Cellulose Fibers Modified With Cerium Fluoride Doped With Terbium Particles.

The Temperature Dependence of the Coefficients of Thermal Expansion of Phenolic Resin.

Synthesis, Chemical Resistance, and Water Absorption of Bamboo Fiber Reinforced Epoxy Composites.

Electrospinning of Poly(ε-caprolactone) Solutions Containing Graphene Oxide: Effects of Graphene Oxide Content and Oxidation Level.

In Situ Preparation of Polyimide/Titanium Carbide Composites With Enhanced Dielectric Constant.

Dielectric Properties of Epoxy/Montmorillonite Nanocomposites and Nanostructured Epoxy/SiO<sub>2</sub>/Montmorillonite Microcomposites.

Characterization of Dielectric Properties of Developed CdS-Gum Arabic Composites in Low Frequency Region.

Effect of SiO<sub>2</sub>/EVA on the Mechanical Properties, Permeability, and Residual Solvent of Polypropylene Packaging Films.

Effects of Chemical Surface Pretreatment on Tensile Properties of a Single Glass Fiber and the Glass Fiber Reinforced Epoxy Composite.

Synthesis and Cytocompatibility of Collagen/Hydroxyapatite Nanocomposite Scaffold for Bone Tissue Engineering.

Silver Nanoparticle Anchored With Novel Crosslinked Beaded Polystyrene/Polyamidoxime Sequential Interpenetrating Polymer Networks (IPNs) and its Antibacterial Activity.

Simulation of Percolation Threshold and Electrical Conductivity in Composites Filled With Conductive Particles: Effect of Polydisperse Particle Size Distribution.

Structural Characterization, Thermal Properties, and Density Functional Theory Studies of PMMA-Maghemite Hybrid Material.

Effect of Reduced Graphene Oxide Functionalization by Sulfanilic Acid on the Mechanical Properties of Poly(styrene-co-acrylonitrile)/Reduced Graphene Oxide Composites.

Preparation, Characterization, and Properties of Silicate/Polyurethaneurea Composites Based on Dipropylene Glycol Dibenzoate.

Temperature-Induced Evolution of Micro-Morphology of Polyaniline Prepared by Gradually Adding Oxidants: Experiments and Mechanism.

Synthesis and Characterization of Poly(propylene carbonate)/Modified Sepiolite Nanocomposites.

Research on the Mechanical Properties Prediction of Carbon/Epoxy Composite Laminates With Different Void Contents.

Studies on Thermal, Mechanical, Morphological, and Viscoelastic Properties of Polybenzimidazole Fiber Reinforced High Density Polyethylene Composites.