Found: 725
Select item for more details and to access through your institution.
Issue Information.
- Published in:
- Polymer Composites, 2018, v. 39, p. E1951, doi. 10.1002/pc.25187
- Publication type:
- Article
Innovative materials of this era for toughening the epoxy matrix: A review.
- Published in:
- Polymer Composites, 2018, v. 39, p. E1959, doi. 10.1002/pc.24789
- By:
- Publication type:
- Article
Experimental study on compression properties and failure mechanism of 3D MWK carbon/epoxy composites at elevated temperatures.
- Published in:
- Polymer Composites, 2018, v. 39, p. E1987, doi. 10.1002/pc.24372
- By:
- Publication type:
- Article
Characterizing viscoelastic properties of carbon fiber/epoxy composites using vector fitting method.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2000, doi. 10.1002/pc.24377
- By:
- Publication type:
- Article
Epoxy resin modified maleic anhydride‐grafted‐liquid polybutadiene on the properties of short aramid fiber reinforced natural rubber composite.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2006, doi. 10.1002/pc.24397
- By:
- Publication type:
- Article
Design, preparation, and characterization of fast cure epoxy/amine‐functionalized graphene oxide nanocomposites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2016, doi. 10.1002/pc.24415
- By:
- Publication type:
- Article
An investigation into hyper‐elastic behavior of BR/epoxy‐polyester hybrid/nanoclay nanocomposites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2028, doi. 10.1002/pc.24417
- By:
- Publication type:
- Article
Effects of particle size and distribution of the sizing agent on carbon fiber/epoxy composites interfacial adhesion.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2036, doi. 10.1002/pc.24439
- By:
- Publication type:
- Article
Synthesis of epoxy‐ended hyperbranched polyesters with reinforcing and toughening function for diglycidyl ether of bisphenol‐A.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2046, doi. 10.1002/pc.24443
- By:
- Publication type:
- Article
Glass Fiber Epoxy Matrix Composites Containing Zero and Two Dimensional Carbonaceous Nanoreinforcements.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2056, doi. 10.1002/pc.24447
- By:
- Publication type:
- Article
Mechanical and viscoelastic study of functionalized MWCNTs/epoxy/Kevlar composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2064, doi. 10.1002/pc.24452
- By:
- Publication type:
- Article
Effects of moisture ingress on the bond between carbon fiber and epoxy resin investigated with molecular dynamics simulation.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2074, doi. 10.1002/pc.24459
- By:
- Publication type:
- Article
Montmorillonite–graphene oxide hybrids and montmorillonite–graphene oxide/epoxy composite: Synthesis, characterization, and properties.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2084, doi. 10.1002/pc.24461
- By:
- Publication type:
- Article
Experimental studies on the punch shear characterization of glass/epoxy/CNTs laminate nanocomposites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2096, doi. 10.1002/pc.24468
- By:
- Publication type:
- Article
Gamma Ray Shielding Property of Tungsten Powder Modified Continuous Basalt Fiber Reinforced Epoxy Matrix Composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2106, doi. 10.1002/pc.24469
- By:
- Publication type:
- Article
Role of graphene oxide surface chemistry on the improvement of the interlaminar mechanical properties of resin infusion processed epoxy‐carbon fiber composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2116, doi. 10.1002/pc.24478
- By:
- Publication type:
- Article
Thermal conductivity of epoxy resin composites filled with combustion‐synthesized AlN powder.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2125, doi. 10.1002/pc.24481
- By:
- Publication type:
- Article
Anticorrosive performance of epoxy/modified clay nanocomposites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2134, doi. 10.1002/pc.24492
- By:
- Publication type:
- Article
Comparison of microwave absorption properties between BaTiO<sub>3</sub>/Epoxy and NiFe<sub>2</sub>O<sub>4</sub>/Epoxy composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2143, doi. 10.1002/pc.24497
- By:
- Publication type:
- Article
Thermal response of carbon fiber epoxy laminates with metallic and nonmetallic protection layers to simulated lightning currents.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2149, doi. 10.1002/pc.24502
- By:
- Publication type:
- Article
Epoxy nanocomposites as matrices for aramid fiber‐reinforced plastics.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2167, doi. 10.1002/pc.24515
- By:
- Publication type:
- Article
Sisal fibril epoxy composite—a high strength electrical insulating material.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2175, doi. 10.1002/pc.24527
- By:
- Publication type:
- Article
Temperature‐dependent thermal decomposition of carbon/epoxy laminates subjected to simulated lightning currents.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2185, doi. 10.1002/pc.24535
- By:
- Publication type:
- Article
Creep and interfacial behavior of carbon fiber reinforced epoxy filament wound laminates.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2199, doi. 10.1002/pc.24537
- By:
- Publication type:
- Article
Cellulose microcrystal improved interphase of ramie fiber‐reinforced epoxy resin composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2207, doi. 10.1002/pc.24567
- By:
- Publication type:
- Article
Hybrid biobased recyclable epoxy composites for mass production.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2217, doi. 10.1002/pc.24582
- By:
- Publication type:
- Article
Finite element simulation and analysis of the dielectric properties of unidirectional aramid/epoxy composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2226, doi. 10.1002/pc.24586
- By:
- Publication type:
- Article
Chemical degradation of reinforced epoxy‐cement composites under CO<sub>2</sub>‐rich environments.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2234, doi. 10.1002/pc.24589
- By:
- Publication type:
- Article
Crashworthiness characteristics of carbon–jute–glass reinforced epoxy composite circular tubes.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2245, doi. 10.1002/pc.24597
- By:
- Publication type:
- Article
Role and sinergy of block copolymer and carbon nanoparticles on toughness in epoxy matrix.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2262, doi. 10.1002/pc.24599
- By:
- Publication type:
- Article
Effect of basalt fiber hybridization on the vibration‐damping behavior of carbon fiber/epoxy composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2274, doi. 10.1002/pc.24606
- By:
- Publication type:
- Article
Processing, characterization, and parametric analysis of erosion behavior of epoxy‐LD sludge composites using Taguchi technique and response surface method.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2283, doi. 10.1002/pc.24610
- By:
- Publication type:
- Article
Effects of corona treatment on morphology and properties of carbon based fillers/epoxy nanocomposites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2298, doi. 10.1002/pc.24622
- By:
- Publication type:
- Article
Directional diffusion of moisture into unidirectional carbon fiber/epoxy Composites: Experiments and modeling.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2305, doi. 10.1002/pc.24626
- By:
- Publication type:
- Article
Preparation of hybrid composites based on epoxy, novolac, and epoxidized novolac resins and silica nanoparticles with high char residue by sol‐gel method.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2316, doi. 10.1002/pc.24631
- By:
- Publication type:
- Article
Reinforcing effects of functionalized graphene oxide on glass fiber/epoxy composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2324, doi. 10.1002/pc.24646
- By:
- Publication type:
- Article
Synthesis and properties of cured epoxy mixed resin systems modified by polyphenylene oxide for production of high‐frequency copper clad laminates.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2334, doi. 10.1002/pc.24651
- By:
- Publication type:
- Article
Modification of carbon fibers surfaces with polyetheramines: The role of interphase microstructure on adhesion properties of CF/epoxy composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2346, doi. 10.1002/pc.24652
- By:
- Publication type:
- Article
Interfacial interaction and the fracture toughness (K<sub>IC</sub>) trends in epoxy nanocomposites filled with functionalized graphene‐based fillers.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2356, doi. 10.1002/pc.24675
- By:
- Publication type:
- Article
Enhanced adhesion between glass, carbon, and their hybrid fiber‐bundle with epoxy at room and elevated temperatures: A comparative study between graphene and MWCNT filled interface strategies.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2370, doi. 10.1002/pc.24684
- By:
- Publication type:
- Article
An effective non‐covalent grafting approach to functionalize carbon fiber with polyethyleneimine in supercritical fluid to enhance the interfacial strength of carbon fiber/epoxy composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2381, doi. 10.1002/pc.24703
- By:
- Publication type:
- Article
Preparation and characterization of siloxane modified: Epoxy terminated polyurethane‐silver nanocomposites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2390, doi. 10.1002/pc.24708
- By:
- Publication type:
- Article
Photoelastic and numerical analyses of the stress distribution around a fiber in a pull‐out test for a thermoplastic fiber/epoxy resin composite.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2397, doi. 10.1002/pc.24709
- By:
- Publication type:
- Article
Achieving high thermal and mechanical properties of epoxy nanocomposites via incorporation of dopamine interfaced clay.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2407, doi. 10.1002/pc.24716
- By:
- Publication type:
- Article
Corrosion behavior of PANI/Epoxy/nano SnO<sub>2</sub> polymeric nanocomposite coated stainless steel in 3.5 wt% NaCl.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2415, doi. 10.1002/pc.24729
- By:
- Publication type:
- Article
TiO<sub>2</sub>/Halloysite hybrid filler reinforced epoxy nanocomposites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2426, doi. 10.1002/pc.24731
- By:
- Publication type:
- Article
A facile method to prepare nanoscale polyacrylonitrile particles grafted aramid fibers for superior interfacial and mechanical properties of epoxy composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2436, doi. 10.1002/pc.24742
- By:
- Publication type:
- Article
Quantitative evaluation of the effect of dispersion techniques on the mechanical properties of polyhedral oligomeric silsesquioxane (POSS)–epoxy nanocomposites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2445, doi. 10.1002/pc.24744
- By:
- Publication type:
- Article
Effect of pre‐tension on tensile strength of glass fibers‐epoxy composite reinforced with shape memory alloy wire.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2454, doi. 10.1002/pc.24751
- By:
- Publication type:
- Article
An investigation on the reinforcement mechanism of the nano‐sized carbonaceous filled epoxy‐glass fiber hybrid‐composites through analysis of fracture surfaces.
- Published in:
- Polymer Composites, 2018, v. 39, p. E2460, doi. 10.1002/pc.24757
- By:
- Publication type:
- Article