Works matching IS 02683768 AND DT 2025 AND VI 137 AND IP 7

Results: 55

Machinability assessment and optimization of turning AISI H11 steel under various minimum quantity lubrication (MQL) conditions using nanofluids.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 4089, doi. 10.1007/s00170-025-15418-w

By:

Hamdi, Amine;
Yapan, Yusuf Furkan;
Uysal, Alper;
Merghache, Sidi Mohammed

Publication type:

Article

Next-generation printed circuit boards manufacturing: an innovative numerical investigation using electroforming process.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 4169, doi. 10.1007/s00170-025-15412-2

By:

Boutana, Ilhem;
Mekideche, Mohamed Rachid;
Boultif, Oussama;
Zait, Abdessalam

Publication type:

Article

Cryogenic turning of Ti-15Mo alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 4129, doi. 10.1007/s00170-025-15410-4

By:

Rubio, Juan C. C.;
Ricci, Virgílio P.;
Rodrigues, Alessandro R.;
Kliauga, Andrea M.;
Ventura, Carlos E. H.

Publication type:

Article

Statistical approach to determine cutting conditions and cutting geometry for edge trimming of G/PA12 plates.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3977, doi. 10.1007/s00170-025-15405-1

By:

Masek, Petr;
Kovalcik, Jaroslav;
Zeman, Pavel

Publication type:

Article

Laser surface treatment of Ti6Al4V alloy: finite element analysis for predicting molten pool geometry and microstructure modifications.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3967, doi. 10.1007/s00170-025-15403-3

By:

Caruso, Serafino;
Saffioti, Maria Rosaria;
Del Prete, Antonio;
Rotella, Giovanna

Publication type:

Article

Prediction of photopolymerization deformation for additive manufacturing based on thermal simulation approximation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 4109, doi. 10.1007/s00170-025-15400-6

By:

Yang, Yizhe;
Liu, Bingshan;
Liu, Xiaodong;
Li, Tao;
Wang, Gong

Publication type:

Article

Forming mechanism, microstructure, and mechanical properties of double-sided gradient structural sheets fabricated by extrusion machining with arrayed sawteeth.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 4023, doi. 10.1007/s00170-025-15399-w

By:

Zhang, Zhuohan;
Zhong, Peixuan;
Hao, Xingsheng;
Shu, Hao;
Deng, Wenjun

Publication type:

Article

An improvement for experiment of manufacturing Roots pump rotors by conical milling cutter.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 4037, doi. 10.1007/s00170-025-15397-y

By:

Tran, Van-Quyet

Publication type:

Article

Novel insights for machining and metallurgical surface features of the heat treatment and non-heat treatment X40CrMoV51 tool steel by powder-added EDM process.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 4063, doi. 10.1007/s00170-025-15396-z

By:

Le, Van-Tao;
Nguyen, Thi Hong Minh;
Hoang, Tien Dung;
Nguyen, Van Son

Publication type:

Article

A through-process modelling approach of aluminium heat-affected zone softening and weld joint performance.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 4011, doi. 10.1007/s00170-025-15395-0

By:

Bunaziv, Ivan;
Tomstad, Asle Joachim;
Kvam-Langelandsvik, Geir;
Eriksson, Magnus

Publication type:

Article

Evaluation of long-term design strength for aluminum alloy SPR joint after aging.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3763, doi. 10.1007/s00170-025-15394-1

By:

Zhao, Lun;
Ye, Kai;
Xiao, Qiqi

Publication type:

Article

Hierarchically rough superhydrophobic metal surfaces fabricated by a sandblasting and hot water treatment process.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 4051, doi. 10.1007/s00170-025-15393-2

By:

Hassan, Laylan B.;
Saadi, Nawzat S.;
Karabacak, Tansel

Publication type:

Article

Multi-objective optimization of FDM process parameters for 3D-printed polycarbonate using Taguchi-based Gray Relational Analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3709, doi. 10.1007/s00170-025-15392-3

By:

Cicek, Umur I.;
Johnson, Andrew A.

Publication type:

Article

Microstructural evolution and hardness enhancement in a novel Cr-Mn-Fe-Co–Ni high entropy alloy processed by laser surface remelting.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3833, doi. 10.1007/s00170-025-15390-5

By:

Lopes, Maria Helena Teles;
Rodrigues, Adilson Vitor;
de Souza, Pablo Miguel;
Stumpf, Guilherme Cardeal;
Mazzer, Eric Marchezini;
Coury, Francisco Gil;
Ramirez, Andres Felipe;
Fogagnolo, João Batista;
Rodrigues Pereira, Pedro Henrique;
Wolf, Witor

Publication type:

Article

Plasticity and ductile fracture of conventionally manufactured AISI 316L compared to one produced by selective laser melting with and without machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3933, doi. 10.1007/s00170-025-15387-0

By:

Šebek, František;
Kubík, Petr;
Zapletal, Josef;
Kunčická, Lenka;
Kocich, Radim;
Pagáč, Marek;
Paška, Zbyněk;
Fojtík, František;
Halama, Radim

Publication type:

Article

On the transferability of post-processing heat treatments designed for PBF-LB IN718 alloys to directed energy deposition specimens.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3949, doi. 10.1007/s00170-025-15386-1

By:

Serrano-Munoz, Itziar;
Agudo Jácome, Leonardo;
Thompsom, Sean;
Schneider, Judy

Publication type:

Article

Review of solder joint vision inspection for industrial applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3257, doi. 10.1007/s00170-025-15383-4

By:

Ong, Teng Yeow;
Tan, Koon Tatt;
Teoh, Ping Chow;
Haron, Mohamad Hushnie

Publication type:

Article

Investigation of the effects of deposition scan patterns on STS 316L thin-wall structures in directed energy deposition.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3727, doi. 10.1007/s00170-025-15382-5

By:

Han, Jisu;
Yang, Jeongho;
Eo, Du-Rim;
Kang, Dongseok;
Yeon, Simo;
Hong, Sukjoon;
Lee, Hyub

Publication type:

Article

Deep learning-based YOLO for semantic segmentation and classification of weld pool thermal images.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3573, doi. 10.1007/s00170-025-15378-1

By:

Jorge, Vinicius Lemes;
Bendaoud, Issam;
Soulié, Fabien;
Bordreuil, Cyril

Publication type:

Article

Additive manufacturing of functional gradient thermoplastic composite using fused deposition modelling and coextrusion continuous fibres.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3587, doi. 10.1007/s00170-025-15376-3

By:

Sotov, Anton;
Abdrakhmanova, Anna;
Zaytsev, Alexander;
Popovich, Anatoliy

Publication type:

Article

Grinding state recognition of arc-shaped CVD diamond tools based on multi-scale acoustic emission features.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3561, doi. 10.1007/s00170-025-15375-4

By:

Zhu, Zhenwei;
Zhao, Huadong;
Chang, Jiahao;
Zhang, Rui;
Tie, Ying

Publication type:

Article

A novel method of volumetric error compensation for aspherical grinding machine considering error coupling effect and compensation strategy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3673, doi. 10.1007/s00170-025-15374-5

By:

Zhang, Kai;
He, Xiangbo;
Li, Ruirui;
Huang, Peizhi;
Feng, Bingjia;
Feng, Huiming;
Huang, Linbin;
Peng, Yunfeng

Publication type:

Article

Compaction effects on the thermal properties of stainless steel 316L powders in 3D printing processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3877, doi. 10.1007/s00170-025-15373-6

By:

Rojas Dorantes, Carlos Abel;
Czekanski, Aleksander

Publication type:

Article

Surface quality prediction in abrasive flow machining using ANN model on small data sets.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3915, doi. 10.1007/s00170-025-15372-7

By:

Wang, Haiquan;
Guo, Yiao;
Wang, Xuanping;
Gao, Hang

Publication type:

Article

Dynamic performance optimization of five-axis machine tools based on S-specimen and servo dynamics matching degree indexes.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3887, doi. 10.1007/s00170-025-15371-8

By:

Guan, Liwen;
Chen, Yanyu;
Wang, Zijian

Publication type:

Article

Suppression strategies of chatter in the cold rolling by regulating interface friction based on dynamic stability analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3743, doi. 10.1007/s00170-025-15370-9

By:

Xin, Yanli;
Gao, Zhiying;
Wang, Xiaoyong

Publication type:

Article

Mitigation strategies for waste elimination and cost reduction in the manufacture of Bowden cables.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 4143, doi. 10.1007/s00170-025-15367-4

By:

Koch, Luís;
Gomes da Silva, Francisco José;
Campilho, Raul Duarte Salgueiral Gomes;
Vieira de Sá, José Carlos;
Resende Lucas, Rafael;
Sales-Contini, Rita de Cássia Mendonça

Publication type:

Article

Developing an intelligent approach based on ANFIS and advanced NSGA-III for improving the turning performance of additively manufactured γ-TiAl alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3333, doi. 10.1007/s00170-025-15366-5

By:

Nasr, Mustafa M.;
Anwar, Saqib

Publication type:

Article

Optimization of open-casting process parameters for fabrication of high-performance TPU/CNT/Fe multi-functional polymer composites: a Taguchi with TOPSIS approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3841, doi. 10.1007/s00170-025-15365-6

By:

Omosa, Geoffrey Barongo;
Mwema, Fredrick Madaraka;
Akinlabi, Esther Titilayo;
Jen, Tien-Chien

Publication type:

Article

On the development of an operational map and a robust processing range for laser-directed energy deposition of AISI 410L stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3443, doi. 10.1007/s00170-025-15362-9

By:

de Sousa, Jurandir Marcos Sá;
Pereira, Milton;
Ferreira, Henrique Santos;
Thiesen, Anselmo;
Gutjahr, Jhonattan;
da Silva, Leandro João

Publication type:

Article

Composite coatings based on nickel and Y<sub>2</sub>O<sub>3</sub> nanoparticles: a comprehensive analysis of developments in electrodeposition and functional property optimization.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3273, doi. 10.1007/s00170-025-15360-x

By:

Abdesselam, Yassine;
Belloufi, Abderrahim;
Rezgui, Imane;
Abdelkrim, Mourad;
Catalin, Tampu;
Chiriță, Bogdan

Publication type:

Article

Mechanical modeling and material damage behavior of CFRP pipe drilling.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3993, doi. 10.1007/s00170-025-15358-5

By:

Tang, Lingyan;
Tang, Siwen;
Qiu, Xinyi;
Li, Pengnan;
Li, Shujian;
Li, Changping;
Liu, Hailang

Publication type:

Article

Integrated vision-based seam tracking system for robotic laser welding of curved closed square butt joints.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3387, doi. 10.1007/s00170-025-15357-6

By:

Nilsen, Morgan;
Sikström, Fredrik

Publication type:

Article

Simulation of aerodynamic characteristics and particle motion laws in shot peening with a B-type nozzle.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3463, doi. 10.1007/s00170-025-15354-9

By:

Fan, Junkai;
Jiang, Shuhui;
Guo, Chaojie;
Gong, Sanpeng;
Zhao, Guofeng;
Luo, Chenxu

Publication type:

Article

BoT-YOLOv8: a highly accurate and stable initial weld position segmentation method for medium-thickness plate.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3813, doi. 10.1007/s00170-025-15353-w

By:

Liu, Zongmin;
Li, Jie;
Zhang, Shunlong;
Qin, Lei;
Shi, Changcheng;
Liu, Ning

Publication type:

Article

Analysis and optimization of the deformability of flax fiber nonwoven tapes during the tape-laying process.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3641, doi. 10.1007/s00170-025-15351-y

By:

Lu, Jingshu;
Krugl, Sascha;
Pidancier, Christian;
L'Hostis, Gildas;
Wang, Peng

Publication type:

Article

Investigating performance and reliability of resistance spot welds on additively manufactured battery tabs using microscopic resolution ultrasonic imaging.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3479, doi. 10.1007/s00170-025-15350-z

By:

Bourgeois, Desmond;
Na, Jeong;
Tiley, Austin;
Walker, Luke;
Middendorf, John;
Kimchi, Menachem

Publication type:

Article

Optimization of multi-track, multi-layer laser cladding process parameters using Gaussian process regression and improved multi-objective particle swarm optimization.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3503, doi. 10.1007/s00170-025-15349-6

By:

Hu, Kaixiong;
Huang, Qiaoyang;
Wang, Li;
Zhou, Yong;
Li, Weidong

Publication type:

Article

Evolution mechanisms in cylindrical grinding of ceramic materials: from cylindrical transverse grinding to cup wheel grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3541, doi. 10.1007/s00170-025-15348-7

By:

Zhou, Jingguo;
Lin, Bin;
Sui, Tianyi;
Zhao, Pengcheng;
Li, Jinming;
Zhang, Jinshuo

Publication type:

Article

Clarification of material removal mechanism in fast ED-milling - part II: numerical simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3657, doi. 10.1007/s00170-025-15345-w

By:

Wang, Jian;
Ma, Jie-Yu;
Lu, Yi-Fan;
Zhang, Ya-Ou;
Zhao, Wan-Sheng

Publication type:

Article

The review and prospect of tool coating technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3107, doi. 10.1007/s00170-025-15344-x

By:

Kang, Kejia;
Su, Sen;
Yu, Bo;
Sun, Zhibin;
Hu, Sumeng;
Wang, Zimian;
Zhao, Chenhao;
Wu, Lan;
Luo, Guoqiang;
Wei, Ronghan

Publication type:

Article

Clarification of material removal mechanism in fast ED milling: part I—experimental investigation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3627, doi. 10.1007/s00170-025-15343-y

By:

Wang, Jian;
Chu, Hao-Yu;
Zhang, Ya-Ou;
Zhao, Wan-Sheng

Publication type:

Article

A practical approach to model tightly coupled elastohydrodynamic lubrication (EHL) at sliding contacts.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3603, doi. 10.1007/s00170-025-15341-0

By:

Bi, Zhuming;
Mueller, Donald;
Mikkola, Aki

Publication type:

Article

Enhancement of the hole quality of freeform CFRP with industrial robot posture optimization.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3489, doi. 10.1007/s00170-025-15333-0

By:

Kang, Yun Seok;
Lee, Haegu;
Kim, Dong Chan;
Seo, Jaewoo;
Park, Hyung Wook

Publication type:

Article

Advances in friction stir processing of aluminum 2024: a review of nanoparticle-reinforced surface composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3141, doi. 10.1007/s00170-025-15332-1

By:

Naumov, Anton Alekseevich;
Safi, Seyed Vahid;
Safi, Seyed Majid

Publication type:

Article

Ultrasonic-driven adaptive control of robotic plasma arc cutting for bevel applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3783, doi. 10.1007/s00170-025-15331-2

By:

Mohamed, Aasim;
Loukas, Charalampos;
Vasilev, Momchil;
Sweeney, Nina;
Dobie, Gordon;
Macleod, Charles

Publication type:

Article

Autonomous direct freeform fabrication strategy for multi-axis additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3525, doi. 10.1007/s00170-025-15329-w

By:

Xiao, Xinyi;
Lee, Yousub;
Feldhausen, Thomas

Publication type:

Article

Predictive maintenance system for screw compressors using machine learning: a comparative study.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3695, doi. 10.1007/s00170-025-15328-x

By:

Daoudi, Nawal;
Zaki, Smail;
Aboussaleh, Mohamed

Publication type:

Article

A method for predicting machining error of thin-walled part considering the dynamic response of elastic deformation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3799, doi. 10.1007/s00170-025-15304-5

By:

Li, Wangfei;
Ren, Junxue;
Shi, Kaining;
Lu, Yanru;
Zhou, Jinhua;
Zheng, Huan

Publication type:

Article

Overview on material removal mechanisms and surface textures modelling in abrasive jet machining processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3165, doi. 10.1007/s00170-025-15300-9

By:

Zhang, Shibo;
Zhang, Zhenzhong;
Lu, Laixiao;
Wang, Zhen;
Yao, Peng

Publication type:

Article