Works matching IS 02683768 AND DT 2024 AND VI 133 AND IP 3/4

Results: 61

Correction to: Tool life experiment of coated cermet during nodular cast iron turning.

Published in:

2024

By:

Lánc, Kryštof;
Fiala, Zdeněk;
Zouhar, Jan

Publication type:

Correction Notice

Unveiling interrupted rolling strategy as post-processing impact on dual phase mechanical characteristics and microstructure Mg-8%Li/ bagasse nanoparticle composite.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1903, doi. 10.1007/s00170-024-13956-3

By:

Ezzat, Abdelrahman Osama;
Aigbodion, Victor Sunday;
Al-Lohedan, Hamad A.;
Ozoude, Chinemerem Jerry

Publication type:

Article

Optimization of silicon ingot manufacturing for high production rates.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1893, doi. 10.1007/s00170-024-13953-6

By:

Ansari Dezfoli, Amir Reza

Publication type:

Article

The improvement of the surface morphology via magnetic field-assisted electrochemical machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1823, doi. 10.1007/s00170-024-13944-7

By:

Wang, ManFu;
Xu, JingSheng;
Fan, DongXu;
Liu, Cong;
Wang, SiFan;
Pang, GuiBing

Publication type:

Article

Characterization of heterogeneous mechanical properties for thick welded joints with flow stress variation in the transverse and thickness directions.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1833, doi. 10.1007/s00170-024-13901-4

By:

Yuan, Ke;
Gu, Bin;
Sun, Shixuan;
Yu, Haidong

Publication type:

Article

Shear strength and failure mode of self-piercing riveted similar and dissimilar materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1749, doi. 10.1007/s00170-024-13895-z

By:

Yue, Deyu;
Lin, Jian;
Lei, Yongping;
Fu, Hanguang

Publication type:

Article

Additive friction stir deposition: a review on processes, parameters, characteristics, and applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1111, doi. 10.1007/s00170-024-13890-4

By:

Li, Xia;
Li, Xiaoliang;
Hu, Shenheng;
Liu, Yubing;
Ma, Diao

Publication type:

Article

Analysis of gas-liquid two-phase flow field with six working teeth spiral incremental cathode for deep special-shaped hole in ECM.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1929, doi. 10.1007/s00170-024-13888-y

By:

Jia, Jianli;
Wei, Yougui;
Ma, Baoji;
Xu, Jiang;
Hao, Yajing

Publication type:

Article

Enhancing the wear resistance by mitigation of defect formations in laser powder bed fusion process of Cu–Cr–Zr alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1845, doi. 10.1007/s00170-024-13883-3

By:

Murugesan, Saravana Kumar;
Natarajan, Jeyaprakash;
Yang, Che-Hua

Publication type:

Article

Effects of a modified heat treatment on the quasi-static and dynamic behavior of additively manufactured lattice structures.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1699, doi. 10.1007/s00170-024-13871-7

By:

Rowe, Russell;
Almeida, Nara;
Prather, Andy;
Beck, Sadie;
Palazotto, Anthony N.;
Davami, Keivan

Publication type:

Article

High and low cycle fatigue characterization for 1.2709 maraging steel at different additively manufacturing conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1519, doi. 10.1007/s00170-024-13870-8

By:

Félix-Martínez, Christian;
Cruz-González, Celso E.;
Sánchez-Santana, Ulises;
Salgado-López, Juan Manuel;
Gomez-Ortega, Arturo

Publication type:

Article

Numerical modeling of industrial parts manufacturing using electromagnetic hemming process.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1943, doi. 10.1007/s00170-024-13869-1

By:

Boutana, Ilhem;
Bousba, Abderrahmane;
Benhadj, Yaakoub Nadjari

Publication type:

Article

Deformation behavior of steel sheets under dynamic underwater impact: electric-pulse triggered energetic materials loading vs. wire explosion loading.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1715, doi. 10.1007/s00170-024-13864-6

By:

Xie, Xueyun;
Yu, Haiping

Publication type:

Article

The contribution of 515-nm green laser L-PBF to the thermal performance of lattice-based heat exchangers for hydrogen storage applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1501, doi. 10.1007/s00170-024-13863-7

By:

Zaied, Meher;
Msolli, Sabeur;
Fourment, Hugo;
Aubry, Eric;
Bolot, Rodolphe;
Lebaal, Nadhir;
Fenineche, Nouredine;
Promoppatum, Patcharapit

Publication type:

Article

Research on ultrasonic elliptical vibration-assisted cutting system based on double excitation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1379, doi. 10.1007/s00170-024-13862-8

By:

Sun, Jian;
Li, Pengyang;
Wang, Kai;
Zhang, Ruiyuan;
Chen, Guoqing;
Zhao, Miaomiao;
Dai, Man;
Zhang, Yao;
Shao, Ding

Publication type:

Article

Containing geometrical tolerances in concurrent optimal allocation of design and process tolerances.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1549, doi. 10.1007/s00170-024-13860-w

By:

Peng, Heping;
Han, Qianpeng

Publication type:

Article

Electrical, microstructural, and mechanical behavior of HSLA X70 pipeline welded by GMAW and FCAW processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1761, doi. 10.1007/s00170-024-13859-3

By:

Benaouda, Omar Fethi;
Kellai, Ahmed;
Elbar, Mohamed;
Benlamnouar, Mohamed Farid;
Benmessaoud, Tahar

Publication type:

Article

Research on tool wear classification of milling 508III steel based on chip spectrum feature.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1531, doi. 10.1007/s00170-024-13854-8

By:

Guan, Rui;
Cheng, Yaonan;
Zhou, Shilong;
Gai, Xiaoyu;
Lu, Mengda;
Xue, Jing

Publication type:

Article

Research on the influence of die head arrangement on the precision of discontinuous deformation in multi-points stretch-bending of profiles.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1733, doi. 10.1007/s00170-024-13852-w

By:

Wen, Yu;
Liang, Ce;
Li, Yi;
Liang, Jicai

Publication type:

Article

Multi-objective optimization method of injection molding process parameters based on hierarchical sampling and comprehensive entropy weights.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1481, doi. 10.1007/s00170-024-13848-6

By:

Zeng, Wei;
Yi, Guodong;
Zhang, Shuyou;
Wang, Zili

Publication type:

Article

Structural optimization study of stationary shoulder friction stir welding head with non-rigid support.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1881, doi. 10.1007/s00170-024-13845-9

By:

Jin, Taotao;
Miao, Pei;
Qi, Chuanyue;
Cui, Xiuhui

Publication type:

Article

Research progress on powder bed fusion additive manufacturing of TiAl-based alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1045, doi. 10.1007/s00170-024-13843-x

By:

Jiang, Lulu;
Lan, Liang;
Bai, Chengyan;
Wang, Haoyu;
Gao, Shuang;
He, Bo

Publication type:

Article

Thermal error prediction of ball screws in full-time series using working condition data based on a mechanism and data hybrid-driven model.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1443, doi. 10.1007/s00170-024-13841-z

By:

Wang, Min;
Lu, Wenlong;
Zhang, Kuan;
Zhu, Xiaofeng;
Wang, Mengqi;
Yang, Bo;
Gao, Xiangsheng

Publication type:

Article

Multidimensional information model-driven digital twin for the intelligent evaluation of production capacity.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1621, doi. 10.1007/s00170-024-13840-0

By:

Zhang, Lu;
He, Songping;
Li, Bin;
Mao, Xinyong;
Tan, Xin

Publication type:

Article

Industry 4.0: review and proposal for implementing a smart factory.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1331, doi. 10.1007/s00170-024-13839-7

By:

Wu, Kan;
Xu, Jia;
Zheng, Meimei

Publication type:

Article

Research on complex surface grinding path planning of grinding robot based on NX and Tecnomatix.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1961, doi. 10.1007/s00170-024-13838-8

By:

Song, Haiying;
Ye, Ruifeng;
Xie, Min

Publication type:

Article

Manufacturing of non-grain-oriented electrical steels: review.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1083, doi. 10.1007/s00170-024-13837-9

By:

Karami, Rasoul;
Butler, David;
Tamimi, Saeed

Publication type:

Article

Processing characteristics and loading principle on micro blanking of cavitation jet.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1317, doi. 10.1007/s00170-024-13836-w

By:

Wang, Yun;
Zhu, Cong;
Li, Fuzhu;
Yu, Chao;
Chen, Shijian;
Wu, Jingyi

Publication type:

Article

Laser shock incremental forming by employing high repetition rate laser pulses with pulse duration in the scale of 100 ns.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1393, doi. 10.1007/s00170-024-13835-x

By:

Shen, Tao;
Zhao, Xiaoxiao;
Li, Jian;
Tian, Ziwei;
Yu, Xiaodi;
Fan, Fan;
Hong, Wei

Publication type:

Article

A novel combined extrusion process of thin-walled tubular part with protrusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1463, doi. 10.1007/s00170-024-13833-z

By:

Zhao, Haisheng;
Wu, Xingchen;
Guo, Shichao;
Li, Xubin;
Wang, Qiang

Publication type:

Article

A novel cooling and lubrication approach: Device development and machining performance evaluation of ultrasonic vibration–assisted MQL.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1667, doi. 10.1007/s00170-024-13832-0

By:

Zhang, Minxiu;
Wu, Bangfu;
Zhao, Biao;
Ding, Wenfeng;
Cui, Hailong

Publication type:

Article

An encoder-decoder-based image segmentation method for abrasive height detection of diamond wire.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1431, doi. 10.1007/s00170-024-13829-9

By:

Zhao, Yukang;
Ge, Peiqi;
Bi, Wenbo;
Zheng, Jintao

Publication type:

Article

Utilizing wire electrical discharge machining for surface quality and precise profile control of Inconel 718 fir-tree slot.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1271, doi. 10.1007/s00170-024-13826-y

By:

Sun, Lunye;
Chu, Zhaofu;
Hou, Yonggang;
Rajurkar, Kamlakar;
Li, Xianguo;
Shi, Shanliang

Publication type:

Article

Optimizing hot forging parameters for gas turbine blade formation: a comprehensive study.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1563, doi. 10.1007/s00170-024-13825-z

By:

Javid, Youness

Publication type:

Article

A review of automated cutting tool selection methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1063, doi. 10.1007/s00170-024-13823-1

By:

Navaneethan, Gowthri;
Palanisamy, Suresh;
Jayaraman, Prem Prakash;
Kang, Yong-Bin;
Stephens, Guy;
Papageorgiou, Angelo;
Navarro, John

Publication type:

Article

Mathematical modelling and cutter design for generating chamfering of transversal profile for cylindrical gears.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1405, doi. 10.1007/s00170-024-13822-2

By:

Jia, Kang;
Wang, Hao;
Ren, Dongxu;
Zhang, Yinhang;
Wan, Shaoke

Publication type:

Article

Analysis of abrasive belt wear effect on residual stress distribution in robotic belt grinding of GH4169.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1651, doi. 10.1007/s00170-024-13820-4

By:

Tao, Zhijian;
Qin, Zehang;
Luo, Xudong;
Qi, Junde;
Hu, Xiaolong;
Zhang, Dinghua

Publication type:

Article

Modeling of cutting force in micro-milling considering asymmetric tool wear.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1597, doi. 10.1007/s00170-024-13819-x

By:

Wang, Weisu;
Tang, Yanling;
Guo, Xuhong;
Zhang, Kedong;
Liu, Tongshun;
Wang, Chengdong

Publication type:

Article

On-machine detection of face milling cutter damage based on machine vision.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1865, doi. 10.1007/s00170-024-13818-y

By:

Qu, Jiaxu;
Yue, Caixu;
Zhou, Jiaqi;
Xia, Wei;
Liu, Xianli;
Liang, Steven Y.

Publication type:

Article

Research on online prediction of deformation of thin-walled parts based on digital twin technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1365, doi. 10.1007/s00170-024-13817-z

By:

Geng, Bowen;
Yue, Caixu;
Xia, Wei;
Jia, Ruhong;
Xu, Yongshi

Publication type:

Article

Establishment and correction of the model for smoke diffusion in minimum quantity lubrication cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1233, doi. 10.1007/s00170-024-13812-4

By:

He, Tao;
Liu, Niancong;
Chen, Hongming;
Lu, Hu;
Zheng, Yuanyang;
Li, Daigang;
Chen, Yun

Publication type:

Article

Application of intelligent decision system based on artificial neural network in free forging of the engine main shaft.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1685, doi. 10.1007/s00170-024-13810-6

By:

Xu, Shucong;
Yuan, Lin;
Shan, Debin

Publication type:

Article

Investigating the influence of rotational speed in wire electric discharge machining of cylindrical workpieces: an experimental and simulation study.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1793, doi. 10.1007/s00170-024-13809-z

By:

Khosravi, Jahangir;
Hesni, Hamid;
Azarhoushang, Bahman

Publication type:

Article

A comparative machinability analysis of aged and freshly manufactured epoxy resins through orthogonal machining experiments.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1585, doi. 10.1007/s00170-024-13808-0

By:

Geier, Norbert;
Poór, Dániel István

Publication type:

Article

Experimental study on magnetic ball-assisted magnetic abrasive finishing for irregular spherical internal cavity of waveguide formed by selective laser melting.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1417, doi. 10.1007/s00170-024-13805-3

By:

Kang, Shijie;
Sun, Yuli;
Chen, Fayu;
Wang, Liaoyuan;
Zhang, Guiguan;
Guo, Jiale;
Zuo, Dunwen

Publication type:

Article

Experimental study of cutting forces and surface topography in three-dimensional vibration-assisted milling for fabricating structured surfaces.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1285, doi. 10.1007/s00170-024-13804-4

By:

Wang, Guilian;
Xiao, Mengjie;
Liu, Wenrui;
Lv, Bingrui;
Xu, Jinyou

Publication type:

Article

Pure waterjet drilling thin CFRP laminate with [0/45/–45/90]<sub>2s</sub> stacking sequence.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1777, doi. 10.1007/s00170-024-13801-7

By:

Liao, Yinghao;
Yao, Longxu;
Li, Hui;
Zhao, Changxi;
Zheng, Liyan;
Wang, Bing;
Liu, Xin

Publication type:

Article

AAC theory for ultrasonic vibration-assisted grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1609, doi. 10.1007/s00170-024-13795-2

By:

Hu, Zhongwei;
Chen, Yue;
Lai, Zhiyuan;
Zhang, Yuqiang;
Yu, Yiqing;
Jin, Jianfeng;
Peng, Qing;
Xu, Xipeng

Publication type:

Article

Influence of tool flank wear considering tool edge radius on instantaneous uncut chip thickness and cutting force in micro-end milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1639, doi. 10.1007/s00170-024-13794-3

By:

Gao, Shuaishuai;
Duan, Xianyin;
Zhu, Kunpeng;
Zhang, Yu

Publication type:

Article

A knowledge graph–based structured representation of assembly process planning combined with deep learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1807, doi. 10.1007/s00170-024-13785-4

By:

Shi, Xiaolin;
Tian, Xitian;
Ma, Liping;
Wu, Xv;
Gu, Jianguo

Publication type:

Article