Works matching IS 02683768 AND DT 2024 AND VI 132 AND IP 5/6

Results: 60

The influence of the machining strategy on milling of polyetheretherketone (PEEK).

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2773, doi. 10.1007/s00170-024-13544-5

By:

Beșliu-Băncescu, Irina;
Tamașag, Ioan;
Slătineanu, Laurențiu

Publication type:

Article

Flexural strength prediction model based on online measured temperature of fusion deposited CF/PEEK composites and accommodation mechanism.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 3005, doi. 10.1007/s00170-024-13561-4

By:

Lou, Yan;
Liu, Xunqi;
Chen, Kewei;
Yu, Chunyan;
Gao, Yujing

Publication type:

Article

Effect of texture location in tool-chip friction region on cutting performance in turning AISI 304.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2787, doi. 10.1007/s00170-024-13550-7

By:

Zou, Ping;
Zhou, Liang;
Yang, Zhenyu;
Ren, Boyuan;
Wang, Xue

Publication type:

Article

Non-destructive detection and analysis of weld defects in dissimilar pulsed GMAW and FSW joints of aluminium castings and plates through 3D X-ray computed tomography.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2957, doi. 10.1007/s00170-024-13576-x

By:

Orlando, Mattia;
De Maddis, Manuela;
Razza, Valentino;
Lunetto, Vincenzo

Publication type:

Article

Impact of product family complexity on process performance in electronic component assembly.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2907, doi. 10.1007/s00170-024-13575-y

By:

Puttero, Stefano;
Verna, Elisa;
Genta, Gianfranco;
Galetto, Maurizio

Publication type:

Article

Unraveling the main issues of direct sample printing and sample cutting from a sheet of tensile test samples for characterization of Material Extrusion components.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2991, doi. 10.1007/s00170-024-13572-1

By:

Lambiase, Francesco;
Scipioni, Silvia Ilaria;
Pace, Francesco;
Paoletti, Alfonso

Publication type:

Article

An investigation on the suitability of different welding recovery procedures for cold stamping punches in VF800AT steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2823, doi. 10.1007/s00170-024-13540-9

By:

Pellin, Adonis;
Israel, Charles Leonardo;
Dalcin, Rafael Luciano

Publication type:

Article

Development of devices for measuring contact friction forces in the processes of volumetric plastic deformation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2839, doi. 10.1007/s00170-024-13537-4

By:

Aliiev, Igramotdin S.;
Levchenko, Vladymyr N.;
Markov, Oleg E.;
Kalujniy, Aleksander V.;
Aliieva, Leila I.;
Sivak, Roman I.

Publication type:

Article

Correction method of servo feed trajectory in block divided EDM for diffusion shaped film cooling holes.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2701, doi. 10.1007/s00170-024-13533-8

By:

Cui, Yingjie;
Tong, Hao;
Yao, Yao;
Zhang, Yikang;
Li, Yong;
Yao, Ruimin

Publication type:

Article

Location dependency of green density and dimension variation in binder jetted parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2853, doi. 10.1007/s00170-024-13529-4

By:

Dorula, Maciej;
Khademitab, Meisam;
Jamalkhani, Mohammad;
Mostafaei, Amir

Publication type:

Article

Experimental and numerical investigation on laser transmission welding of stainless steel 304 L and borosilicate glass.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2661, doi. 10.1007/s00170-024-13527-6

By:

Harinarayana, Vaidyanath;
Shin, Yung C.

Publication type:

Article

An experimental study on mixed reality-based user interface for collaborative operation of high-precision process equipment.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2443, doi. 10.1007/s00170-024-13517-8

By:

Wang, Zhuo;
Li, Liang;
Liu, Ye;
Jiang, Yan;
Wang, Yang;
Dai, Yuwei

Publication type:

Article

Empirical analysis of sensor type importance for data preparation of real-time operational status monitoring in fused deposition modeling 3D printers.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2617, doi. 10.1007/s00170-024-13522-x

By:

Baek, Sujeong;
Kim, Byeong Su;
Lee, Yebon

Publication type:

Article

Sustainable machining practices: a comparative study of MQL and MQL with wheel cleaning jet applied to different abrasives.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2395, doi. 10.1007/s00170-024-13521-y

By:

Moretti, Guilherme Bressan;
Machado, Felipe de Carvalho;
Winckler, Leonardo;
Ribeiro, Fernando Sabino Fonteque;
Talon, Anthony Gaspar;
Sanchez, Luiz Eduardo de Angelo;
Bianchi, Eduardo Carlos;
Lopes, José Claudio

Publication type:

Article

Coupled filling-curing simulation and optimized design of cure cycle in liquid composite molding.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2489, doi. 10.1007/s00170-024-13519-6

By:

Yang, Wenkai;
Liu, Wenhao;
Jia, Yunlong;
Chen, Wengang

Publication type:

Article

Influence of fillets onto mechanical properties of octet-truss lattice structures.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2503, doi. 10.1007/s00170-024-13512-z

By:

Doutre, Pierre-Thomas;
Grandvallet, Christelle;
Gobet, Léa;
Vignat, Frédéric;
Dendievel, Rémy

Publication type:

Article

Study on the regulation of deformation uniformity and microstructure law in the forming of gear shafts by cross wedge rolling.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2461, doi. 10.1007/s00170-024-13525-8

By:

Lulu, Chen;
Xuedao, Shu;
Xiaogu, Chen;
Wenwei, Gong;
Zixuan, Li;
Haijie, Xu

Publication type:

Article

Quantitative finite element analysis of microscopic surface formation for TC4 aeroengine blade polishing using single-grain method.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2941, doi. 10.1007/s00170-024-13515-w

By:

Chen, Zhen;
Zhao, Pan;
Yan, Rui;
Tian, Guoliang;
Yang, Mo;
Shi, Yaoyao

Publication type:

Article

Numerical simulation of thermomechanical behavior and mechanical property in HRFSW of Aluminum Alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2411, doi. 10.1007/s00170-024-13510-1

By:

He, Peng;
Shao, Yong;
Sun, Yuji;
Zhang, Rongzhou;
Zhang, Shaoqi;
Guo, Pingyi;
Chen, Shujin

Publication type:

Article

Cooling pattern on the run-out table of a hot rolling mill for an HSLA steel: a finite element analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2381, doi. 10.1007/s00170-024-13513-y

By:

Yazdani, Saba;
Tavakoli, Mohammad Reza;
Niroomand, Mohammad Reza;
Forouzan, Mohammad Reza

Publication type:

Article

Energy efficiency of Gaussian and ring profiles for LPBF of nickel alloy 718.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 3093, doi. 10.1007/s00170-024-13511-0

By:

Cozzolino, Ersilia;
Tiley, Austin J.;
Ramirez, Antonio J.;
Astarita, Antonello;
Herderick, Edward D.

Publication type:

Article

Investigation and chemical processing effect of sisal fiber epoxy composite characteristic enhancement with nano-SiC via injection mold.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2209, doi. 10.1007/s00170-024-13516-9

By:

Karthikeyan, Mariappan Kanaga Vijaya;
Kamaraj, Logesh;
Kavipriya, Senguttuvan;
Rathinavelu, Venkatesh;
Sadagopan, Dinesh Kumar;
Soudagar, Manzoore Elahi M.;
Al Obaid, Sami;
Alharbi, Sulaiman Ali;
Manickaraj, Pethuraj

Publication type:

Article

On the feasibility and the impact resistance of a 3D cross-based fractal produced by powder bed fusion additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2217, doi. 10.1007/s00170-024-13503-0

By:

Viccica, Marco;
Serra, Gabriel Ferreira;
de Sousa, Ricardo Alves;
Galati, Manuela

Publication type:

Article

New multi-function building plate for improving metal laser powder bed fusion by enhancing the alignment accuracy of in-process monitoring data, computed tomography measurements, and building volume geometry.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2369, doi. 10.1007/s00170-024-13514-x

By:

Zanini, Filippo;
Bonato, Nicolò;
Carmignato, Simone

Publication type:

Article

A novel five-axis on-machine measurement error prediction model considering positioning errors of machine tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2971, doi. 10.1007/s00170-024-13502-1

By:

Guo, Yanheng;
Wan, Neng;
Zhuang, Qixin;
Zhu, Guangxu;
Qiao, Hu;
Chang, Zhiyong

Publication type:

Article

Parametric evaluation of chip formation in peripheral milling of single crystal Ni-based superalloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2293, doi. 10.1007/s00170-024-13498-8

By:

Gururaja, Sethurao;
Rahul, Akula;
Nandam, Srinivasa Rao;
Singh, Kundan Kumar

Publication type:

Article

Simulation of temperature field and optimization of welding parameters in friction stir welding thick large circular storage tank.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2807, doi. 10.1007/s00170-024-13509-8

By:

Lu, Xiaohong;
Li, Xiangchun;
Teng, Le;
Luan, Yihan;
Zhang, Haotian;
Zhang, Yu;
Liang, Steven Y.

Publication type:

Article

Investigation into microdefects and corrosion resistance of nickel-titanium shape memory alloy using electrical discharge coating process.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2587, doi. 10.1007/s00170-024-13507-w

By:

Mansor, Ahmad Fairuz;
Azmi, Azwan Iskandar;
Ismail, Sikiru Oluwarotimi

Publication type:

Article

Energy optimization method for variable curvature contour machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2187, doi. 10.1007/s00170-024-13478-y

By:

Ma, Junyan;
Liu, Jiangyou;
Wei, Lutao;
Lu, Juan;
Liao, Xiaoping;
Ou, Chengyi

Publication type:

Article

Effect of print parameters on the tensile strength and built time of FDM-printed PLA parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 3047, doi. 10.1007/s00170-024-13506-x

By:

Hasan, Asif;
Fahad, Muhammad;
Khan, Maqsood Ahmed

Publication type:

Article

Dynamic modelling and energy-efficiency optimization in a 3-DOF parallel robot.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2677, doi. 10.1007/s00170-024-13496-w

By:

Fabris, Giuliano;
Scalera, Lorenzo;
Gasparetto, Alessandro

Publication type:

Article

Investigations on pulsed and continuous supply of a cryogenic medium in milling of Waspaloy and Inconel 718 under various lubri-cooling environments.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 3027, doi. 10.1007/s00170-024-13505-y

By:

Iqbal, Asif;
Saelzer, Jannis;
Ali, Kamran;
Biermann, Dirk;
Sicking, Martin;
Bakar, Muhammad S. Abu;
Khan, Aqib Mashood;
Nauman, Malik M.

Publication type:

Article

A comprehensive investigation on the effect of processing conditions on the dry drilling performance of electron beam melting–manufactured Ti6Al4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2427, doi. 10.1007/s00170-024-13504-z

By:

Jeyamohan, Rajaguru;
Dhayanithi, Selvakumaran;
Krishnaswamy, Hariharan;
Astarita, Antonello;
Narayanan, Arunachalam

Publication type:

Article

Burr formation mechanism and experimental research in longitudinal-torsional ultrasonic-assisted milling Ti-6Al-4 V.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2315, doi. 10.1007/s00170-024-13494-y

By:

Song, Wenbin;
Zhao, Mingli;
Zhu, Junming;
Xue, Boxi;
Wang, Hao

Publication type:

Article

An experimental hybrid customized AI and generative AI chatbot human machine interface to improve a factory troubleshooting downtime in the context of Industry 5.0.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2715, doi. 10.1007/s00170-024-13492-0

By:

Kiangala, Kahiomba Sonia;
Wang, Zenghui

Publication type:

Article

A comprehensive review of recent advances in laser powder bed fusion characteristics modeling: metallurgical and defects.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2233, doi. 10.1007/s00170-024-13491-1

By:

Nabavi, Seyedeh Fatemeh;
Dalir, Hamid;
Farshidianfar, Anooshiravan

Publication type:

Article

Bibliometric and systematic analysis on electric resistance spot welding of 22MnB5 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2129, doi. 10.1007/s00170-024-13487-x

By:

Ribeiro, Robson Raimundo Cardoso;
de Souza, Luiz Gustavo Paes;
de Souza Caliari, Juliana Cássia;
Teodoro, Claudemiro Luz;
de Freitas Gomes, José Henrique

Publication type:

Article

Effects of gas tungsten arc welding on the mechanical properties and microstructure of 316L stainless steel by powder bed fusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2563, doi. 10.1007/s00170-024-13495-x

By:

Kuehn, Kevin;
Wang, Xuan

Publication type:

Article

Numerical prediction and experimental validation of forming limit curves of laminated half-hard aluminum sheets.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2157, doi. 10.1007/s00170-024-13473-3

By:

Bouziane, Khalid;
EL Mrabti, Iliass;
Touache, Abdelhamid;
Chamat, Abderrahim;
EL Hakimi, Abdelhadi;
Moujibi, Nabil

Publication type:

Article

Melt pool width measurement in a multi-track, multi-layer laser powder bed fusion print using single-camera two-wavelength imaging pyrometry.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2575, doi. 10.1007/s00170-024-13486-y

By:

Vallabh, Chaitanya Krishna Prasad;
Zhang, Haolin;
Anderson, David Scott;
To, Albert C.;
Zhao, Xiayun

Publication type:

Article

Modelling the weld cladding process to predict weld clad position and shape error.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2877, doi. 10.1007/s00170-024-13481-3

By:

Votruba, Vojtěch;
Fornůsek, Tomáš;
Havlan, Tomáš;
Kratěna, Tomáš;
Smolík, Jan

Publication type:

Article

2017A Alloy surface layer after flow burnishing with glass microspheres.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2477, doi. 10.1007/s00170-024-13480-4

By:

Korzynska, Katarzyna;
Zarski, Tomasz;
Zeglicki, Wojciech;
Zwolak, Jan

Publication type:

Article

GRAAL—modeling, prototyping and assessing a gamified responsible augmented assembly line system.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2735, doi. 10.1007/s00170-024-13460-8

By:

Agati, Salvador S.;
Hounsell, Marcelo da S.;
Paterno, Aleksander S.

Publication type:

Article

Non-invasive calibration of a Stewart platform by photogrammetry.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2601, doi. 10.1007/s00170-024-13485-z

By:

Karmakar, Sourabh;
Turner, Cameron J.

Publication type:

Article

Powder stream thermal dynamics in directed energy deposition for high aggregation and thermal efficiency using computational fluid dynamics modeling.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2923, doi. 10.1007/s00170-024-13482-2

By:

Qu, Xiaoguang;
Chai, Ze;
Liu, Tongtong;
Chen, Huabin;
Chen, Xiaoqi

Publication type:

Article

Study of multi-pass laser welding deformation of bipolar plates by experiments and simulations.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2863, doi. 10.1007/s00170-024-13466-2

By:

Zhang, Jiabo;
Chen, Kai;
Wang, Yigang;
Tang, Puhong;
Yang, Wenbin

Publication type:

Article

Investigation on ultrasonic-assisted grinding of characteristics of C/SiC composites by brazed and electroplated diamond wheels.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2171, doi. 10.1007/s00170-024-13465-3

By:

Zhang, Chuandian;
Chen, Tao;
Duan, Zhenyan;
Liu, Fengyu

Publication type:

Article

Experimental and numerical optimization of deep drawing process parameters for square medical container design with the Taguchi method.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2643, doi. 10.1007/s00170-024-13477-z

By:

Taşkın, Aleyna;
Dengiz, Cengiz Görkem

Publication type:

Article

A novel method of optimized selective assembly for remanufactured products.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2631, doi. 10.1007/s00170-024-13464-4

By:

Wang, Zisheng;
Jiang, Xingyu;
Yang, Guozhe;
Song, Boxue;
Ni, Zhijia;
Zhang, Ren

Publication type:

Article

Adaptive fuzzy observer and control in servo drivers for two-axis drilling machine.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 3105, doi. 10.1007/s00170-024-13435-9

By:

Lin, Feng-Chieh;
Chen, Chin-Sheng;
Lin, Chia-Jen

Publication type:

Article