Works matching IS 02683768 AND DT 2024 AND VI 131 AND IP 7/8

Results: 62

Correction to: Closed-loop quality control system for laser chemical machining in metal micro-production.

Published in:

2024

By:

Zhang, P.;
von Freyberg, A.;
Fischer, A.

Publication type:

Correction Notice

Study on the formation mechanism of surface defects in the processing of large particle SiCp/Al composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4165, doi. 10.1007/s00170-024-13287-3

By:

Chen, Zhigao;
Wang, Bo;
Li, Duo;
Li, Ziteng;
Chen, Mingjun

Publication type:

Article

Correction to: Research status of influence mechanism of surface integrity on fatigue behavior of metal workpieces: a review.

Published in:

2024

By:

Yao, Jun;
Li, Xun;
Du, Baorui;
Zhang, Ning;
Gou, Ruijie

Publication type:

Correction Notice

Evolution of hot metal gas forming (HMGF) technologies and its applications: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3441, doi. 10.1007/s00170-024-13289-1

By:

Blala, Hamza;
Pengzhi, Cheng;
Shenglun, Zhang;
Khan, Shahrukh

Publication type:

Article

Numerical analysis EF of resilience impact test behavior for X80 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4107, doi. 10.1007/s00170-024-13258-8

By:

El Alami, Mohammed;
Laazizi, Abdellah;
Fri, Kaoutar

Publication type:

Article

Optimization of shot peening parameters for blades based on the constraint of equivalent residual stress-induced deformation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3781, doi. 10.1007/s00170-024-13238-y

By:

Zhang, Jiyin;
Yao, Changfeng;
Zhuo, Weiwei;
Tan, Liang;
Cui, Minchao;
Wei, Qing

Publication type:

Article

Investigation of co-induced crack initiation process by prestressed slotting and rotating-bending in low-stress cropping.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4217, doi. 10.1007/s00170-024-13286-4

By:

Jiayi, Xu;
Qing, Zhao;
Qiang, Zhou;
Qiang, Zhang;
Qingqiang, He;
Lijun, Zhang

Publication type:

Article

Optimizing the flexural properties of additively manufactured PETG: a multi-objective approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4307, doi. 10.1007/s00170-024-13301-8

By:

Karkalos, Nikolaos E.;
Karmiris-Obratański, Panagiotis;
Papazoglou, Emmanouil L.;
Markopoulos, Angelos P.

Publication type:

Article

Investigation of depth error of microgroove in micro-EDM adopting ultrasonic circular vibration (UCV) electrode.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4009, doi. 10.1007/s00170-024-13283-7

By:

Tang, Jiajing;
Li, Zhengkai;
Bai, Jicheng

Publication type:

Article

Effect of magnesium addition consolidated by the thixoforming process on the wear properties of A319 alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4327, doi. 10.1007/s00170-024-13288-2

By:

Alhawari, Khaled Salem;
Omar, Mohd Zaidi;
Samat, Saziana;
Aziz, Ahmad Muhammad

Publication type:

Article

Study on coarse grain refinement of Ti-6554 billet in hot extrusion process.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4233, doi. 10.1007/s00170-024-13246-y

By:

Guo, Shiqi;
Huang, Liang;
Li, Changmin;
Zhao, Mingjie;
Luo, Hengjun;
Deng, Hao;
Liu, Shuai;
Li, Jianjun

Publication type:

Article

Numerical analysis on temperature characteristics and melt flow dynamic behaviors in electron beam welding of dissimilar aluminum alloy lock-butt joint.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4267, doi. 10.1007/s00170-024-13282-8

By:

Chen, Shuai;
Cheng, Sheng;
Wang, Yu;
Yu, Kezhuang;
Li, Li;
Cao, Hongzhi;
Ma, Zhengwei

Publication type:

Article

Effect of short electric arc milling discharge machining on the processing performance of two-dimensional C/SiC composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3423, doi. 10.1007/s00170-024-13284-6

By:

Wang, Bingbing;
Zhou, Jianping;
Xu, Yan;
Chen, Xiaokang;
Tang, Wei;
Ji, Yu;
Qin, Caoyang;
Ma, Hongwang

Publication type:

Article

Supercritical melt flow in high-speed laser welding and its interdependence with the geometry of the keyhole and the melt pool.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4253, doi. 10.1007/s00170-024-13266-8

By:

Reinheimer, Eveline N.;
Berger, Peter;
Hagenlocher, Christian;
Weber, Rudolf;
Graf, Thomas

Publication type:

Article

A review on machining Ti–5Al–5V–5Mo–3Cr alloy using defined geometry tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3373, doi. 10.1007/s00170-024-13237-z

By:

dos Santos, Rodrigo Gonçalves;
He, Qianxi;
de Paiva Jr., José Mário Fernandes;
Veldhuis, Stephen C.;
Torres, Ricardo Diego;
Amorim, Fred Lacerda

Publication type:

Article

Gradual error detection technique for non-destructive assessment of density and tensile strength in fused filament fabrication processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4149, doi. 10.1007/s00170-024-13280-w

By:

Raths, Max;
Bauer, Lukas;
Kuettner, Andreas;
Fischer, Samuel;
Laumer, Tobias

Publication type:

Article

Effect of beam defocusing on porosity formation mechanism in laser-MIG hybrid welded titanium alloy joints.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4185, doi. 10.1007/s00170-024-13263-x

By:

He, Zhenxing;
Zhao, Yong;
Chen, Fugang;
Huangfu, Lesen;
Chen, Guoqiang;
Qin, Yonghui;
Song, Shuming

Publication type:

Article

The study of different flow fields at the corner during the electrochemical machining of internal gear.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3811, doi. 10.1007/s00170-024-13257-9

By:

Li, Junfei;
Tan, Shuaizhe;
Liu, Guixian;
Su, Guokang;
Zhang, Yongjun

Publication type:

Article

A disturbance evaluation method for scheduling mechanisms in digital twin-based workshops.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4071, doi. 10.1007/s00170-024-13251-1

By:

Yue, Pengjun;
Hu, Tianliang;
Wei, Yongli;
Dong, Lili;
Meng, Qi;
Ma, Songhua

Publication type:

Article

Influences of laser on the energy parameters of the electric arc in the case of laser-MIG hybrid welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4055, doi. 10.1007/s00170-024-13244-0

By:

Bidi, Lyes;
Le Masson, Philippe;
Cicala, Eugen

Publication type:

Article

Understanding the stress corrosion cracking resistance of laser shock surface patterned austenitic stainless-steel weld joints.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4089, doi. 10.1007/s00170-024-13242-2

By:

John, Merbin;
Islam, Md Shariful;
Misra, Manoranjan;
Menezes, Pradeep L.

Publication type:

Article

Comparative life cycle assessment of aluminium and CFRP composites: the case of aerospace manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4345, doi. 10.1007/s00170-024-13241-3

By:

Atescan-Yuksek, Yagmur;
Mills, Andrew;
Ayre, David;
Koziol, Krzysztof;
Salonitis, Konstantinos

Publication type:

Article

Construction of a predictive model for residual stresses in micro-milling of 7075 aluminum alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3871, doi. 10.1007/s00170-024-13239-x

By:

Zhang, Ping;
Zhang, Songting;
Wang, Shunxiang;
Sun, Yajie;
Yue, Xiujie

Publication type:

Article

Study on the injection wear behavior and contact characteristics of SiC and Al<sub>2</sub>O<sub>3</sub> particles during the abrasive jet machining of Nickel 200.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3831, doi. 10.1007/s00170-024-13231-5

By:

Tsai, Feng-Che

Publication type:

Article

Research status of influence mechanism of surface integrity on fatigue behavior of metal workpieces: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3401, doi. 10.1007/s00170-024-13195-6

By:

Yao, Jun;
Li, Xun;
Du, Baorui;
Zhang, Ning;
Gou, Ruijie

Publication type:

Article

Unveiling empirical correlation between electrical and thermal conductivities of medium porosity open-cell porous aluminium fabricated by replication casting method.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3499, doi. 10.1007/s00170-024-13230-6

By:

Egwuonwu, Njoku Romanus;
Boniface, Oloche Oyihi;
Sunday, Aigbodion Victor

Publication type:

Article

Comparative investigation and optimization of cutting tools performance during milling machining of titanium alloy (Ti6Al4V) using response surface methodology.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3565, doi. 10.1007/s00170-024-13225-3

By:

Phokobye, Solomon Ntshiniki;
Desai, Dawood Ahmed;
Tlhabadira, Isaac;
Sadiku, Emmanuel Rotimi;
Mutombo, Kalenda

Publication type:

Article

A novel assembly-oriented measurement datum transformation and tolerance reallocation method.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4281, doi. 10.1007/s00170-024-13152-3

By:

Peng, Yun;
Du, Kunpeng;
Hou, Guoyi;
Li, Shuanggao;
Huang, Xiang

Publication type:

Article

Distribution analysis of deterministic clamping and positioning error for machining of ring-shaped workpieces considering alignment uncertainty.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3921, doi. 10.1007/s00170-024-13235-1

By:

Du, Xueming;
Liu, Shun;
Jin, Sun

Publication type:

Article

Cutting dynamics research on the five-axis machining of thin curved surface with barrel-taper-ball milling cutter.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3905, doi. 10.1007/s00170-024-13234-2

By:

Jiang, Yufeng;
Guo, Minglong;
Du, Guocai;
Wei, Zhaocheng

Publication type:

Article

Effect of pre-strain on the brazing characteristics of a high-strength aluminum brazing sheet with a barrier layer.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3651, doi. 10.1007/s00170-024-13222-6

By:

Waqar, Taha;
Whitney, Mark A.;
Jin, Haiou;
Wells, Mary A.;
Benoit, Michael J.

Publication type:

Article

A new redundancy strategy for enabling graceful degradation in resilient robotic flexible assembly cells.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3695, doi. 10.1007/s00170-024-13223-5

By:

Jin, Ziyue;
Marian, Romeo M.;
Chahl, Javaan S.

Publication type:

Article

Performance of additively manufactured composite mold with uniform fiber orientation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4297, doi. 10.1007/s00170-024-13220-8

By:

Shree, Swayam;
Jayaraman, Krishnamurthy;
Dereims, Arnaud;
Raveendra, Ravi

Publication type:

Article

A novel step-by-step procedure for the kinematic calibration of robots using a single draw-wire encoder.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4129, doi. 10.1007/s00170-024-13219-1

By:

Boschetti, Giovanni;
Sinico, Teresa

Publication type:

Article

Cold formability of friction stir processed 5754-H111 and 6082-T6 aluminum alloys: an experimental and numerical study.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3851, doi. 10.1007/s00170-024-13218-2

By:

Silvestri, Alessia Teresa;
Parodo, Gianluca;
Napolitano, Francesco;
El Hassanin, Andrea;
Scherillo, Fabio;
Sorrentino, Luca;
Squillace, Antonino

Publication type:

Article

Thanking reviewers.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3337, doi. 10.1007/s00170-024-13151-4

By:

Nee, Andrew Y. C.;
Schilgerius, Silvia

Publication type:

Article

Effect of milling time on structural, physical and photocatalytical properties of Ti-Ni alloy for biomedical applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3539, doi. 10.1007/s00170-024-13207-5

By:

Bouchareb, Nabila;
Fellah, Mamoun;
Hezil, Naouel;
Hamadi, Fouzia;
Montagne, Alex;
Aleksei, Obrosov;
Yadav, Krishna Kumar;
El-Hiti, Gamal A.

Publication type:

Article

Optimization of shape-forming accuracy in arc-striking and arc-extinguishing areas of weld bead by torch hovering for directed energy deposition-arc manufactured nickel aluminum bronze alloy component.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3957, doi. 10.1007/s00170-024-13210-w

By:

Huang, Jiacheng;
Li, Fang;
Shen, Chen;
Zhang, Yuelong;
Xin, Jianwen;
Ruan, Gang;
Hua, Xueming

Publication type:

Article

The curvature modeling for the double layered clad plate by asymmetric rolling with different diameters.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3793, doi. 10.1007/s00170-024-13190-x

By:

Jiang, Lian-Yun;
Liang, Jia-Le;
Chen, Ya-Fei;
Shi, Jian-Hui;
Ma, Li-Feng

Publication type:

Article

Grinding performances and failure analyses of electroplated Ni–B-diamond tools with a high density of single- or dual-layer D-150-diamond particles.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3739, doi. 10.1007/s00170-024-13205-7

By:

Shen, Chia Hsuan;
Rodchanarowan, Aphichart;
Li, Pin Yan;
Huang, Chia Ching;
Chen, Yu Chieh;
Lai, Po Liang;
Huang, Ching An

Publication type:

Article

Announcement of B. John Davies Prize for the best paper published in IJAMT in 2022.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3335, doi. 10.1007/s00170-024-13187-6

By:

Schilgerius, Silvia;
Nee, Andrew Y. C.

Publication type:

Article

Prediction of temperature field in the whole process of instantaneous and steady state of high-speed motorized spindle.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4021, doi. 10.1007/s00170-024-13204-8

By:

Lixiu, Zhang;
Ruwei, Bao

Publication type:

Article

An integrated framework for a multi-material surface roughness prediction model in CNC turning using theoretical and machine learning methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3579, doi. 10.1007/s00170-024-13201-x

By:

Bennett, Kristin S.;
DePaiva, Jose Mario;
Veldhuis, Stephen C.

Publication type:

Article

Reducing tool-tip wear in micro-ECDM scanning process with feedback control of flexible contact force.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3527, doi. 10.1007/s00170-024-13200-y

By:

Nawaz, Shan Ali;
Cao, Peiyao;
Tong, Hao;
Li, Yong

Publication type:

Article

Research on the thermal forming limit diagram (TFLD) with the M-K model for Ti-6Al-4V alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3713, doi. 10.1007/s00170-024-13154-1

By:

Gao, Song;
Wang, Guotao;
Sang, Ye;
Sun, Yingli;
Li, Qihan

Publication type:

Article

Forming mechanism of leaf-like integral outside finned tubes via sequential knurling and cutting-bending method.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3729, doi. 10.1007/s00170-024-13194-7

By:

Zou, Yang;
Tang, Kairui;
Guo, Guiqing;
Tang, Yong

Publication type:

Article

Optimization method and experimental research on robot belt grinding trajectory of additive blade with non-uniform allowance distribution.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 4201, doi. 10.1007/s00170-024-13146-1

By:

Zhao, Xiaoyu;
Xiao, Guijian;
Zhang, Tangming;
Zheng, Zihan;
Yu, Jingyan

Publication type:

Article

A novel approach to voice of customer extraction using GPT-3.5 Turbo: linking advanced NLP and Lean Six Sigma 4.0.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3615, doi. 10.1007/s00170-024-13167-w

By:

Shahin, Mohammad;
Chen, F. Frank;
Hosseinzadeh, Ali;
Maghanaki, Mazdak;
Eghbalian, Ayda

Publication type:

Article

Optimization of forward pulsed currents for combining the precision shaping and polishing of nickel micro mould tools to reduce demoulding defects.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3631, doi. 10.1007/s00170-024-13163-0

By:

Zaki, Sana;
Zhang, Nan;
Gilchrist, Michael D.

Publication type:

Article

A novel approach for robot calibration based on measurement sub-regions with comparative validation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3995, doi. 10.1007/s00170-024-13127-4

By:

Toquica, Juan S.;
S.T. Motta, José Mauricio

Publication type:

Article