Works matching IS 02683768 AND DT 2024 AND VI 130 AND IP 11/12

Results: 60

Energy efficiency improvement method of magnetic pulse welding based on auxiliary capacitance.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5869, doi. 10.1007/s00170-024-13120-x

By:

Liu, Wentao;
Peng, Wenxiong;
Li, Zhi;
Zhang, Huaiqing

Publication type:

Article

Magnetic field–assisted ultrasonic EDM removal mechanism and surface morphology study.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 6043, doi. 10.1007/s00170-024-13111-y

By:

Dong, Yinghuai;
Zhang, Shaojian;
Wang, Yan;
Niu, Yuebo;
Liu, Qihang;
Deng, Can;
Gu, Hangxi

Publication type:

Article

Experimental study on the influence of workpiece shape on discharge gap and burr in LS-WEDM and the preparation of microelectrode array with specific size.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5965, doi. 10.1007/s00170-024-13106-9

By:

Jin, Liya;
Gong, Yadong;
Hu, Yantong;
Sun, Yao;
Liang, Chunyou

Publication type:

Article

An investigation of the mechanical characteristics of BH 340 gas metal arc welded joints using digital image correlation technique and regression analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5935, doi. 10.1007/s00170-024-13086-w

By:

Zhao, Dawei;
Guseinov, Kirill;
Vdonin, Nikita

Publication type:

Article

Improving surface striation and kerf taper of hybrid Al/CFRP stacks using dual-pass abrasive waterjet slotting strategy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5763, doi. 10.1007/s00170-024-13084-y

By:

Li, Maojun;
Su, Ting;
Lin, Xiangchen

Publication type:

Article

Investigating the impact of internal fatigue crack propagation in aluminum alloy plates repaired with a composite patch.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5999, doi. 10.1007/s00170-024-13080-2

By:

Chaib, Mohammed;
Slimane, Abdelkader;
Slimane, Sidahmed;
Dahmane, Sidahmed;
Lahouel, Anas Abderrahmane;
Kaci, Djafar Ait;
Bahram, Kaddour;
Achache, Habib;
Ziadi, Abdelkader;
Bouchouicha, Benattou

Publication type:

Article

Analyzing the mechanisms of Al2O3-TiO2 coating for enhanced slurry erosion resistance on AISI410 stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5837, doi. 10.1007/s00170-024-13077-x

By:

Saini, Praveen Kumar;
Bansal, Anuj;
Singh, Vikrant;
Chauhan, Sumika;
Vashishtha, Govind;
Singla, Anil Kumar;
Arya, Harish Kumar;
Gupta, Munish Kumar;
Kumar, Manish

Publication type:

Article

Spinning process of 2219 aluminum alloy tubes for used in hydroforming.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5479, doi. 10.1007/s00170-024-13070-4

By:

Zhu, Shiqiang;
Wang, Kehuan;
Wang, Yongming;
Shen, Ruxun;
Liu, Gang;
Yuan, Shijian

Publication type:

Article

Study on arc shape, weldment microstructure, and mechanical properties of Ti-6Al-4V welded by FFDP TIG waveform.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5269, doi. 10.1007/s00170-024-13067-z

By:

Kuang, Yingwei;
Jia, Jianjun;
Zhu, Zeguang;
Gui, Zixiao;
Tian, Jiyu;
Wang, Zhenmin

Publication type:

Article

Water jet guided high-power laser energy transmission loss analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5379, doi. 10.1007/s00170-024-13063-3

By:

Zhao, Zhen;
Zhang, Guanghui;
Huang, Yuxing;
Zhou, Jia;
Shi, Tielin;
Lin, Ze;
Yang, Xiaoqing;
Jiao, Hui;
Long, Yuhong

Publication type:

Article

Numerical simulation on pore formation and suppression for dual-beam laser welding of sandwich structure.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 6011, doi. 10.1007/s00170-024-13058-0

By:

Zheng, Zhengang;
Shao, Chendong;
Lan, Ling;
Wu, Guangming;
Lu, Fenggui

Publication type:

Article

Modeling and optimization of surface residual stress profiles in milling of aluminum 7075-T6 alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5913, doi. 10.1007/s00170-024-13057-1

By:

Yue, Qibin;
He, Yan;
Li, Yufeng;
Tian, Shufei

Publication type:

Article

Research on material removal of Ti-6Al-4V by laser-belt machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5533, doi. 10.1007/s00170-024-13056-2

By:

Xiao, Guijian;
Ni, Yuanhe;
Liu, Zhenyang;
He, Yi;
Li, Xin

Publication type:

Article

CNN-empowered identification of heat source parameters from the cross-section profile of laser-welded zone.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5441, doi. 10.1007/s00170-024-13054-4

By:

Guo, Zhenfei;
Jiang, Hao;
He, Longchao;
Lei, Zhenkun;
Bai, Ruixiang

Publication type:

Article

The influence of shot peening on mechanical properties, wear, and corrosion resistance of 42CrMo steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5299, doi. 10.1007/s00170-024-13052-6

By:

Sun, Guoqing;
Wu, Wangping

Publication type:

Article

Microstructure, hardness, and wear resistance of AA5083/Ti3SiC2 composites fabricated via friction stir processing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5979, doi. 10.1007/s00170-024-13051-7

By:

Benamor, Abdessabour;
Chiker, Nabil;
Salhi, Merouane;
Haddad, Adel;
Hadji, Youcef;
Benamor, Hiba;
Hamzaoui, Billel;
Badji, Riad;
Hadji, Mohamed

Publication type:

Article

Inhibiting thinning in tube bending by a superposition effect under a boosting movement.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5329, doi. 10.1007/s00170-024-13047-3

By:

Fang, Hao;
Wang, Zhineng;
Bin, Guangfu;
Ling, Weiming;
Ling, Yaocheng;
Tran, Cong Trieu

Publication type:

Article

Evaluating innovative future robotic applications in manufacturing using a fuzzy collaborative intelligence approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 6027, doi. 10.1007/s00170-024-13046-4

By:

Chen, Tin-Chih Toly;
Wang, Yu-Cheng

Publication type:

Article

Welding motion synchronization of tank with variable curvature section based on discrete planning method of welding torch posture.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5727, doi. 10.1007/s00170-024-13045-5

By:

Song, Yanli;
Li, Weihao;
Wang, Jun;
Lu, Jue;
Zhang, Shulei;
Zuo, Hongzhou;
Wang, Xuanguo

Publication type:

Article

Fabrication and characterization of aluminum foam reinforced with nanostructured γ-Al2O3 via friction stir process for enhanced mechanical performance.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5359, doi. 10.1007/s00170-024-13044-6

By:

Papantoniou, Ioannis G.;
Manolakos, Dimitrios E.

Publication type:

Article

Powder bed fusion integrated product and process design for additive manufacturing: a systematic approach driven by simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5425, doi. 10.1007/s00170-024-13042-8

By:

Dalpadulo, Enrico;
Pini, Fabio;
Leali, Francesco

Publication type:

Article

Analysis of distortion, corrosion and mechanical properties of welded CSN Civil-300 steel U-type profiles.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5095, doi. 10.1007/s00170-024-13041-9

By:

Pereira, Josemairon Prado;
Hernandez, Bruno Agostinho;
de Magalhães Bento Gonçalves, Gilberto;
Sousa, Edson Antonio Capello

Publication type:

Article

Hot-pressed calcium phosphates as a potential bone substitute: structural and mechanical characterization.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5619, doi. 10.1007/s00170-024-13038-4

By:

Pereira, Helena;
Carvalho, Oscar;
Bdikin, Igor;
Silva, Filipe Samuel;
Miranda, Georgina

Publication type:

Article

Influence of unidirectional loading pusher head structure on the deformation law of bionic egg-shaped shells in internal high-pressure bulging.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5219, doi. 10.1007/s00170-024-13036-6

By:

Sun, Zhiying;
Shen, Mingting;
Shi, Zhengxian;
Cheng, Huiming

Publication type:

Article

The impact of process parameters and pin-to-shoulder ratio in FSW of polycarbonate: welding forces and critical quality indicators.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5457, doi. 10.1007/s00170-024-13033-9

By:

Vidakis, Nectarios;
Petousis, Markos;
David, Constantine;
Sagris, Dimitrios;
Mountakis, Nikolaos;
Moutsopoulou, Amalia

Publication type:

Article

Exploring the influence of graphene incorporation on the characteristics of 3D-printed PLA.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5813, doi. 10.1007/s00170-024-13032-w

By:

Liesenfeld, Janaina;
Jablonski, Jailton Jair;
da Silva, Juliana Rosemara Felisberto;
Buenos, Alexandre Aparecido;
Scheuer, Cristiano José

Publication type:

Article

A novel approach for predicting the complex geometry generated by electrochemical jet machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5369, doi. 10.1007/s00170-024-13031-x

By:

Liu, Weidong;
Li, Wentao;
Guo, Zhiyong;
Zhao, Yonghua;
Wang, Zhiping

Publication type:

Article

Effects of base plate temperature on microstructure evolution and high-temperature mechanical properties of IN718 processed by laser powder bed fusion using simulation and experiment.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5777, doi. 10.1007/s00170-024-13028-6

By:

Kakehi, Koji;
Chowdhury, Hasina Tabassum;
Shinoda, Yusuke;
Naidu, Palleda Thaviti;
Kakuta, Naoto;
Ishisako, Shohei

Publication type:

Article

Study on composite material drilling with step elliptical sphere-core drill (SESCD).

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5391, doi. 10.1007/s00170-024-13027-7

By:

Liao, Shao-Sen;
Liao, Kang-Yu;
Li, Cheng-En;
Lai, Tsung-Yi;
Tsao, Chung-Chen

Publication type:

Article

Polyether Ketone Ketone (PEKK) matrix composites for material extrusion additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5401, doi. 10.1007/s00170-024-13026-8

By:

Rashed, Kaifur;
Kafi, Abdullah;
Simons, Ranya;
Dell'Olio, Mel;
Bateman, Stuart

Publication type:

Article

Modeling nonisothermal laser amorphization: a multicomponent alloy perspective.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5795, doi. 10.1007/s00170-024-13025-9

By:

Kovalev, Oleg B.;
Gusarov, Andrey V.;
Ivanenko, Daniil S.

Publication type:

Article

Machine learning for multi-dimensional performance optimization and predictive modelling of nanopowder-mixed electric discharge machining (EDM).

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5641, doi. 10.1007/s00170-024-13023-x

By:

Sana, Muhammad;
Asad, Muhammad;
Farooq, Muhammad Umar;
Anwar, Saqib;
Talha, Muhammad

Publication type:

Article

Adhesive bonding of glass-fibre thermoplastic composite: process optimisation and sustainability analysis using LCA methodology.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5709, doi. 10.1007/s00170-024-13022-y

By:

Mandolfino, Chiara;
Cassettari, Lucia;
Lertora, Enrico;
Pizzorni, Marco

Publication type:

Article

Research on design and cutting performance of revolving lemniscate milling cutter.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5895, doi. 10.1007/s00170-024-13020-0

By:

Fan, Mengchao;
Bi, Chunxu;
Liu, Xianli;
Ding, Mingna;
Song, Huixu

Publication type:

Article

Mechanical-metallurgical-corrosion behavior of Cr-Si-S-C ferritic/ferromagnetic stainless steel, known as AISI 430F, before and after isothermal recrystallization annealing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5493, doi. 10.1007/s00170-024-13015-x

By:

Bazri, Shahab;
Mapelli, Carlo;
Barella, Silvia;
Gruttadauria, Andrea;
Mombelli, Davide;
Nemfardi, Renato;
Bedini, Roberto;
Zucchelli, Giorgio

Publication type:

Article

Computational study of rapid direct metal laser sintering for compression mold manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 6073, doi. 10.1007/s00170-024-13014-y

By:

Mirzaei, Shokoufeh;
Siaumau, Ryan

Publication type:

Article

Cutting performance and machining economy of the hard cutting tools in clean cutting of hardened H13 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5165, doi. 10.1007/s00170-024-13012-0

By:

Jing, Chengli;
Zheng, Guangming;
Cheng, Xiang;
Cui, Yuxin;
Liu, Huanbao;
Zhang, Huaqiang

Publication type:

Article

Structural design and heat transfer analysis of twin-screw extrusion 3D printer.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5601, doi. 10.1007/s00170-024-13010-2

By:

Qin, Wang;
Li, Shujuan;
Bai, Haiqing;
Jia, Shikui

Publication type:

Article

An experimental assessment and optimisation of hole quality in Al2024-T3 aluminium alloy during abrasive water jet machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5199, doi. 10.1007/s00170-024-13009-9

By:

Shi, Hang;
Giasin, Khaled;
Barouni, Antigoni;
Zhang, Zhongyi

Publication type:

Article

Mechanism of a deterministic sponge figuring processing (SFP) in Ni–P surface formation considering the robustness of the tool influence function: modeling and experimental investigation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5563, doi. 10.1007/s00170-024-13008-w

By:

Li, YuHao;
Li, Guo;
Xue, JiaDai;
Ding, Fei;
Wang, Bo

Publication type:

Article

Robot autonomous grasping and assembly skill learning based on deep reinforcement learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5233, doi. 10.1007/s00170-024-13004-0

By:

Chen, Chengjun;
Zhang, Hao;
Pan, Yong;
Li, Dongnian

Publication type:

Article

Mechanical behavior of carbon fiber-reinforced plastic during rotary ultrasonic machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5345, doi. 10.1007/s00170-024-12995-0

By:

Slimane, Abdelkader;
Chaib, Mohammed;
Slimane, Sidahmed;
Dahmane, Sidahmed;
Lahouel, Anas Abderrahmane;
Guelailia, Ahmed;
Bahram, Kaddour;
Kebdani, Said;
Bouchouicha, Benattou

Publication type:

Article

Comprehensive analysis of the effects of different parameters on the grinding performance for surfaces.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5147, doi. 10.1007/s00170-024-12993-2

By:

Ren, Lijuan;
Wang, Nina;
Zhang, Guangpeng;
Wang, Xionghui;
Li, Xiaoting

Publication type:

Article

Method for edge chipping monitoring based on vibration polar coordinate image feature analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5137, doi. 10.1007/s00170-024-12981-6

By:

Jiang, Zhenxi;
Wang, Fuji;
Mou, Wenping;
Zhu, Shaowei;
Fu, Rao;
Yu, Zhiyong

Publication type:

Article

Assessment of performance parameters in intermittent turning and multi-response optimization of machining conditions using DF, MOORA, VIKOR, and coupled NSGAII-VIKOR methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5665, doi. 10.1007/s00170-024-12979-0

By:

Khelfaoui, Fethi;
Yallese, Mohammed Athmane;
Boucherit, Septi;
Ouelaa, Nouredine;
Belhadi, Salim;
Ben Salem, Sahbi

Publication type:

Article

Ultrasonic assisted electrochemical drilling and grinding of small holes on SLMed Hastelloy X with rotating abrasive tube electrode.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5181, doi. 10.1007/s00170-024-12978-1

By:

Qin, Yipeng;
Liu, Yong;
Guan, Wenchao;
Shu, Tong;
Wang, Kan

Publication type:

Article

Positioning error calibration of six-axis robot based on sub-identification space.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5693, doi. 10.1007/s00170-024-12973-6

By:

Jiang, Xiaogeng;
Zhang, Duo;
Wang, Hao

Publication type:

Article

Effect of a novel pin tool with large diameter disc on the microstructure and mechanical properties of Al/Mg dissimilar friction stir lap joint.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5251, doi. 10.1007/s00170-024-12970-9

By:

Jiang, Tianfan;
Hu, Jinpeng;
Shen, Yifu;
Sun, Tao;
Ni, Ruiyang;
Cao, Fujun;
Yu, Tao;
Zhou, Guangming

Publication type:

Article

An angle-driven parameter control model for corner paths in the DED-arc process of nickel aluminum bronze alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5285, doi. 10.1007/s00170-024-12963-8

By:

Huang, Jiacheng;
Li, Fang;
Shen, Chen;
Zhang, Yuelong;
Hua, Xueming

Publication type:

Article

Investigating strength increasing modifications to a friction stir welded AA7075 T-peel joint's exit location: a modeling led study.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5591, doi. 10.1007/s00170-024-12961-w

By:

Balusu, Kranthi;
Das, Hrishikesh;
Shukla, Shivakant;
Soulami, Ayoub;
Upadhyay, Piyush

Publication type:

Article