Works matching IS 02683768 AND DT 2024 AND VI 130 AND IP 11/12
Results: 60
Energy efficiency improvement method of magnetic pulse welding based on auxiliary capacitance.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5869, doi. 10.1007/s00170-024-13120-x
- By:
- Publication type:
- Article
Magnetic field–assisted ultrasonic EDM removal mechanism and surface morphology study.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 6043, doi. 10.1007/s00170-024-13111-y
- By:
- Publication type:
- Article
Experimental study on the influence of workpiece shape on discharge gap and burr in LS-WEDM and the preparation of microelectrode array with specific size.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5965, doi. 10.1007/s00170-024-13106-9
- By:
- Publication type:
- Article
An investigation of the mechanical characteristics of BH 340 gas metal arc welded joints using digital image correlation technique and regression analysis.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5935, doi. 10.1007/s00170-024-13086-w
- By:
- Publication type:
- Article
Improving surface striation and kerf taper of hybrid Al/CFRP stacks using dual-pass abrasive waterjet slotting strategy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5763, doi. 10.1007/s00170-024-13084-y
- By:
- Publication type:
- Article
Investigating the impact of internal fatigue crack propagation in aluminum alloy plates repaired with a composite patch.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5999, doi. 10.1007/s00170-024-13080-2
- By:
- Publication type:
- Article
Analyzing the mechanisms of Al2O3-TiO2 coating for enhanced slurry erosion resistance on AISI410 stainless steel.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5837, doi. 10.1007/s00170-024-13077-x
- By:
- Publication type:
- Article
Spinning process of 2219 aluminum alloy tubes for used in hydroforming.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5479, doi. 10.1007/s00170-024-13070-4
- By:
- Publication type:
- Article
Study on arc shape, weldment microstructure, and mechanical properties of Ti-6Al-4V welded by FFDP TIG waveform.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5269, doi. 10.1007/s00170-024-13067-z
- By:
- Publication type:
- Article
Water jet guided high-power laser energy transmission loss analysis.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5379, doi. 10.1007/s00170-024-13063-3
- By:
- Publication type:
- Article
Numerical simulation on pore formation and suppression for dual-beam laser welding of sandwich structure.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 6011, doi. 10.1007/s00170-024-13058-0
- By:
- Publication type:
- Article
Modeling and optimization of surface residual stress profiles in milling of aluminum 7075-T6 alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5913, doi. 10.1007/s00170-024-13057-1
- By:
- Publication type:
- Article
Research on material removal of Ti-6Al-4V by laser-belt machining.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5533, doi. 10.1007/s00170-024-13056-2
- By:
- Publication type:
- Article
CNN-empowered identification of heat source parameters from the cross-section profile of laser-welded zone.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5441, doi. 10.1007/s00170-024-13054-4
- By:
- Publication type:
- Article
The influence of shot peening on mechanical properties, wear, and corrosion resistance of 42CrMo steel.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5299, doi. 10.1007/s00170-024-13052-6
- By:
- Publication type:
- Article
Microstructure, hardness, and wear resistance of AA5083/Ti<sub>3</sub>SiC<sub>2</sub> composites fabricated via friction stir processing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5979, doi. 10.1007/s00170-024-13051-7
- By:
- Publication type:
- Article
Inhibiting thinning in tube bending by a superposition effect under a boosting movement.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5329, doi. 10.1007/s00170-024-13047-3
- By:
- Publication type:
- Article
Evaluating innovative future robotic applications in manufacturing using a fuzzy collaborative intelligence approach.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 6027, doi. 10.1007/s00170-024-13046-4
- By:
- Publication type:
- Article
Welding motion synchronization of tank with variable curvature section based on discrete planning method of welding torch posture.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5727, doi. 10.1007/s00170-024-13045-5
- By:
- Publication type:
- Article
Fabrication and characterization of aluminum foam reinforced with nanostructured γ-Al<sub>2</sub>O<sub>3</sub> via friction stir process for enhanced mechanical performance.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5359, doi. 10.1007/s00170-024-13044-6
- By:
- Publication type:
- Article
Powder bed fusion integrated product and process design for additive manufacturing: a systematic approach driven by simulation.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5425, doi. 10.1007/s00170-024-13042-8
- By:
- Publication type:
- Article
Analysis of distortion, corrosion and mechanical properties of welded CSN Civil-300 steel U-type profiles.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5095, doi. 10.1007/s00170-024-13041-9
- By:
- Publication type:
- Article
Hot-pressed calcium phosphates as a potential bone substitute: structural and mechanical characterization.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5619, doi. 10.1007/s00170-024-13038-4
- By:
- Publication type:
- Article
Influence of unidirectional loading pusher head structure on the deformation law of bionic egg-shaped shells in internal high-pressure bulging.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5219, doi. 10.1007/s00170-024-13036-6
- By:
- Publication type:
- Article
The impact of process parameters and pin-to-shoulder ratio in FSW of polycarbonate: welding forces and critical quality indicators.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5457, doi. 10.1007/s00170-024-13033-9
- By:
- Publication type:
- Article
Exploring the influence of graphene incorporation on the characteristics of 3D-printed PLA.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5813, doi. 10.1007/s00170-024-13032-w
- By:
- Publication type:
- Article
A novel approach for predicting the complex geometry generated by electrochemical jet machining.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5369, doi. 10.1007/s00170-024-13031-x
- By:
- Publication type:
- Article
Effects of base plate temperature on microstructure evolution and high-temperature mechanical properties of IN718 processed by laser powder bed fusion using simulation and experiment.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5777, doi. 10.1007/s00170-024-13028-6
- By:
- Publication type:
- Article
Study on composite material drilling with step elliptical sphere-core drill (SESCD).
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5391, doi. 10.1007/s00170-024-13027-7
- By:
- Publication type:
- Article
Polyether Ketone Ketone (PEKK) matrix composites for material extrusion additive manufacturing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5401, doi. 10.1007/s00170-024-13026-8
- By:
- Publication type:
- Article
Modeling nonisothermal laser amorphization: a multicomponent alloy perspective.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5795, doi. 10.1007/s00170-024-13025-9
- By:
- Publication type:
- Article
Machine learning for multi-dimensional performance optimization and predictive modelling of nanopowder-mixed electric discharge machining (EDM).
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5641, doi. 10.1007/s00170-024-13023-x
- By:
- Publication type:
- Article
Adhesive bonding of glass-fibre thermoplastic composite: process optimisation and sustainability analysis using LCA methodology.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5709, doi. 10.1007/s00170-024-13022-y
- By:
- Publication type:
- Article
Research on design and cutting performance of revolving lemniscate milling cutter.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5895, doi. 10.1007/s00170-024-13020-0
- By:
- Publication type:
- Article
Mechanical-metallurgical-corrosion behavior of Cr-Si-S-C ferritic/ferromagnetic stainless steel, known as AISI 430F, before and after isothermal recrystallization annealing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5493, doi. 10.1007/s00170-024-13015-x
- By:
- Publication type:
- Article
Computational study of rapid direct metal laser sintering for compression mold manufacturing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 6073, doi. 10.1007/s00170-024-13014-y
- By:
- Publication type:
- Article
Cutting performance and machining economy of the hard cutting tools in clean cutting of hardened H13 steel.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5165, doi. 10.1007/s00170-024-13012-0
- By:
- Publication type:
- Article
Structural design and heat transfer analysis of twin-screw extrusion 3D printer.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5601, doi. 10.1007/s00170-024-13010-2
- By:
- Publication type:
- Article
An experimental assessment and optimisation of hole quality in Al2024-T3 aluminium alloy during abrasive water jet machining.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5199, doi. 10.1007/s00170-024-13009-9
- By:
- Publication type:
- Article
Mechanism of a deterministic sponge figuring processing (SFP) in Ni–P surface formation considering the robustness of the tool influence function: modeling and experimental investigation.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5563, doi. 10.1007/s00170-024-13008-w
- By:
- Publication type:
- Article
Robot autonomous grasping and assembly skill learning based on deep reinforcement learning.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5233, doi. 10.1007/s00170-024-13004-0
- By:
- Publication type:
- Article
Mechanical behavior of carbon fiber-reinforced plastic during rotary ultrasonic machining.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5345, doi. 10.1007/s00170-024-12995-0
- By:
- Publication type:
- Article
Comprehensive analysis of the effects of different parameters on the grinding performance for surfaces.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5147, doi. 10.1007/s00170-024-12993-2
- By:
- Publication type:
- Article
Method for edge chipping monitoring based on vibration polar coordinate image feature analysis.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5137, doi. 10.1007/s00170-024-12981-6
- By:
- Publication type:
- Article
Assessment of performance parameters in intermittent turning and multi-response optimization of machining conditions using DF, MOORA, VIKOR, and coupled NSGAII-VIKOR methods.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5665, doi. 10.1007/s00170-024-12979-0
- By:
- Publication type:
- Article
Ultrasonic assisted electrochemical drilling and grinding of small holes on SLMed Hastelloy X with rotating abrasive tube electrode.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5181, doi. 10.1007/s00170-024-12978-1
- By:
- Publication type:
- Article
Positioning error calibration of six-axis robot based on sub-identification space.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5693, doi. 10.1007/s00170-024-12973-6
- By:
- Publication type:
- Article
Effect of a novel pin tool with large diameter disc on the microstructure and mechanical properties of Al/Mg dissimilar friction stir lap joint.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5251, doi. 10.1007/s00170-024-12970-9
- By:
- Publication type:
- Article
An angle-driven parameter control model for corner paths in the DED-arc process of nickel aluminum bronze alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5285, doi. 10.1007/s00170-024-12963-8
- By:
- Publication type:
- Article
Investigating strength increasing modifications to a friction stir welded AA7075 T-peel joint's exit location: a modeling led study.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5591, doi. 10.1007/s00170-024-12961-w
- By:
- Publication type:
- Article