Works matching IS 02683768 AND DT 2023 AND VI 126 AND IP 3/4

Results: 60

Impact of nozzle temperature on dimensional and mechanical characteristics of low-density PLA.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1629, doi. 10.1007/s00170-023-11236-0

By:

de Freitas, Fernando;
Pegado, Hélio

Publication type:

Article

Die wear analysis and pre-forging process optimization of hot forging for automobile flange fork.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1701, doi. 10.1007/s00170-023-11235-1

By:

Zheng, Xuewen;
Zhang, Ying;
Chen, Zhiying;
Sun, Libin;
Dong, Wanpeng;
Cao, Fenghua;
Bao, Shiyou;
Li, Xi;
Sun, Yan;
Wang, Xuan;
Yao, Shuo

Publication type:

Article

Influence of the deformation temperature on the formability of AA5083 during electromagnetic forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1639, doi. 10.1007/s00170-023-11234-2

By:

Dong, Pengxin;
Wu, Jiawei;
Cao, Quanliang;
Chen, Qi;
Han, Xiaotao

Publication type:

Article

Forming analysis of T2 copper foil processed by submerged water jet cavitation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1497, doi. 10.1007/s00170-023-11241-3

By:

Yu, Chao;
He, Peiyu;
Li, Fuzhu;
Zhang, Kun;
Wang, Yun;
Li, Retao

Publication type:

Article

Creep anisotropy reduction and improvement via post-heat treatment in yttrium-added Hastelloy-X fabricated by laser powder bed fusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1593, doi. 10.1007/s00170-023-11237-z

By:

Banoth, Santhosh;
Palleda, Thaviti Naidu;
Saito, Takuma;
Murakami, Hideyuki;
Kakehi, Koji

Publication type:

Article

Interface characterization and formation mechanism of Al/Ti dissimilar joints of refill friction stir spot welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1539, doi. 10.1007/s00170-023-11226-2

By:

Nan, Xinchen;
Zhao, Hongyun;
Ma, Chengyue;
Sun, Shulei;
Sun, Guangda;
Xu, Ziyan;
Zhou, Li;
Wang, Rui;
Song, Xiaoguo

Publication type:

Article

Effect of spiral welding path and laser power on weld in laser welding of aluminum tab for lithium-ion battery.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1317, doi. 10.1007/s00170-023-11225-3

By:

Shin, Joong-Han;
Noh, Hyeong-Chang;
Park, Go-Dong

Publication type:

Article

Experimental study on the cytocompatibility of milling surface of poly-ether-ether-ketone (PEEK).

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1747, doi. 10.1007/s00170-023-11223-5

By:

Liu, Xinrui;
Lei, Qian

Publication type:

Article

Assembly sequence planning method for optimum assembly accuracy of complex products based on modified teaching–learning based optimization algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1681, doi. 10.1007/s00170-023-11220-8

By:

Zheng, Yu;
Chen, Liang;
Wu, Dianliang;
Jiang, Peng;
Bao, Jinsong

Publication type:

Article

A rapid identification method for angular positioning error of rotary axes for machine tools with 5 axes based on a double ball-bar.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1567, doi. 10.1007/s00170-023-11219-1

By:

Jiao, Anling;
Chen, Guangsheng

Publication type:

Article

Tool wear assessment and life prediction model based on image processing and deep learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1303, doi. 10.1007/s00170-023-11189-4

By:

Wu, Cheng;
Wang, Shenlong

Publication type:

Article

On machining K417 superalloy with sliding self-propelled rotary tools: simulation and experimental investigation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1669, doi. 10.1007/s00170-023-11218-2

By:

He, Wenbo;
Xue, Zhongling;
Guo, Rang;
Chen, Ni

Publication type:

Article

Numerical simulation research on welded residual stress and distortion of aero-engine afterburner lobe mixer with different welding sequences.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1329, doi. 10.1007/s00170-023-11210-w

By:

Jin, Hongxi;
Chen, Zhenlin;
Liu, Xiangbo;
Wei, Yanhong;
Chen, Jicheng

Publication type:

Article

A machine learning method for cutting parameter selection in rotary ultrasonic-assisted end grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1577, doi. 10.1007/s00170-023-11196-5

By:

Qazani, Mohammad Reza Chalak;
Amini, Saeid;
Pedrammehr, Siamak;
Baraheni, Mohammad;
Suhail, Adeel H.

Publication type:

Article

Information system-theoretic view on the architecture of smart manufacturing systems: a case study in the Democratic People's Republic of Korea.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1005, doi. 10.1007/s00170-023-11193-8

By:

Kim, Song-Chol;
Jong, Il-Chol;
Rim, Gwang-Nam;
Kwon, Il-Jin;
Ryu, Un-Gyong;
Pak, Jong-Chol;
Kim, Jong-Chol

Publication type:

Article

Formability and microstructure analysis of TiBw/TA15 composites sheet with superplastic tensile and gas bulging tests.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1657, doi. 10.1007/s00170-023-11190-x

By:

Qian, Jianhang;
Liu, Gang;
Zeng, Yuansong;
Fu, Mingjie;
Wang, Fuxin;
Liu, Xiaotong

Publication type:

Article

Adjustment of the geometries of the cutting front and the kerf by means of beam shaping to maximize the speed of laser cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1527, doi. 10.1007/s00170-023-11215-5

By:

Lind, Jannik;
Hagenlocher, Christian;
Weckenmann, Niklas;
Blazquez-Sanchez, David;
Weber, Rudolf;
Graf, Thomas

Publication type:

Article

An improved approach to tool life promotion concerning cutting edge microgeometry.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1717, doi. 10.1007/s00170-023-11204-8

By:

Zhuang, Kejia;
Huang, Yujian;
Hu, Cheng;
Wang, Jue;
Zou, Lingli

Publication type:

Article

Manual assembly and Human–Robot Collaboration in repetitive assembly processes: a structured comparison based on human-centered performances.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1213, doi. 10.1007/s00170-023-11197-4

By:

Gervasi, Riccardo;
Capponi, Matteo;
Mastrogiacomo, Luca;
Franceschini, Fiorenzo

Publication type:

Article

Compressive response versus power consumption of acrylonitrile butadiene styrene in material extrusion additive manufacturing: the impact of seven critical control parameters.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1233, doi. 10.1007/s00170-023-11202-w

By:

Petousis, Markos;
Vidakis, Nectarios;
Mountakis, Nikolaos;
Karapidakis, Emmanuel;
Moutsopoulou, Amalia

Publication type:

Article

Optimization of manufacturing parameters for Fe–25Cr–13Co magnetic alloy by using Taguchi technique.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1363, doi. 10.1007/s00170-023-11201-x

By:

Haider, Ali;
Jaffery, Syed Husain Imran;
Khan, Aamir Nusair;
Ulqadir, Najam

Publication type:

Article

Enhancing the interfacial bonding strength between 3D-printed aluminium substrates and carbon fibre–reinforced polymers.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1189, doi. 10.1007/s00170-023-11200-y

By:

Abdoli, Hamed;
Chan, Yuk Lun;
Diegel, Olaf;
Allen, Tom;
Battley, Mark;
Bickerton, Simon

Publication type:

Article

On the Utility of the Thermal-Pseudo Mechanical Model's Residual Stress Prediction Capability for the Development of Friction Stir Processing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1775, doi. 10.1007/s00170-023-11199-2

By:

Balusu, Kranthi;
Choi, Kyoo Sil;
Das, Hrishikesh;
Samanta, Avik;
Upadhyay, Piyush;
Jana, Saumyadeep;
Soulami, Ayoub

Publication type:

Article

Creep-feed grinding of single crystal nickel-base turbine blade fir-tree roots: tool wear, grinding force, temperature, and surface integrity.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1453, doi. 10.1007/s00170-023-11188-5

By:

Miao, Qing;
Lu, Mengbin;
Ding, Wenfeng;
Kuang, Weijie;
Dai, Chenwei;
Yin, Zhen;
Zhang, Ming

Publication type:

Article

A model reconstruction strategy with geometric parameters adjustment function for repairing damaged blade.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 973, doi. 10.1007/s00170-023-11182-x

By:

Dang, Jianing;
Wu, Baohai;
Zhang, Ying;
Gao, Limin

Publication type:

Article

A geometric error measurement method for five-axis ultra-precision machine tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1379, doi. 10.1007/s00170-023-11181-y

By:

Song, Luqi;
Zhao, Xueshen;
Zhang, Qiang;
Shi, Dequan;
Sun, Tao

Publication type:

Article

A new control parameter to predict micro-warping-induced job failure in LPBF of TI6AL4V titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1143, doi. 10.1007/s00170-023-11179-6

By:

Buffa, Gianluca;
Costa, Antonio;
Palmeri, Dina;
Pollara, Gaetano;
Barcellona, Antonio;
Fratini, Livan

Publication type:

Article

Predicting axial force in friction stir welding thick 2219 aluminum alloy plate.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1025, doi. 10.1007/s00170-023-11175-w

By:

Teng, Le;
Lu, Xiaohong;
Luan, Yihan;
Sun, Shixuan

Publication type:

Article

Structure optimization of electromagnetic clinching die based on response surface methodology and particle swarm optimization algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1611, doi. 10.1007/s00170-023-11171-0

By:

Ji, Yanan;
Huang, Changqing;
Sun, Xiaoming;
Wang, Shu;
Yang, Huan;
Cui, Xiaohui

Publication type:

Article

Post-process drilling of AlSi10Mg parts by laser powder bed fusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1199, doi. 10.1007/s00170-023-11170-1

By:

Ertürk, Alpay Tamer;
Yarar, Eser;
Özer, Gökhan;
Bulduk, Mustafa Enes

Publication type:

Article

Design of a novel 2D ultrasonic transducer for 2D high-frequency vibration–assisted micro-machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1035, doi. 10.1007/s00170-023-11154-1

By:

Satpute, Vinod;
Huo, Dehong;
Hedley, John;
Elgendy, Mohammed

Publication type:

Article

Additive manufacturing of recycled plastics: a 'techno-eco-efficiency' assessment.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1471, doi. 10.1007/s00170-023-11169-8

By:

Jayawardane, Heshan;
Davies, Ian J.;
Gamage, J. R.;
John, Michele;
Biswas, Wahidul K.

Publication type:

Article

Optimization of material extrusion additive manufacturing process parameters for polyether ketone ketone (PEKK).

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1067, doi. 10.1007/s00170-023-11167-w

By:

Rashed, Kaifur;
Kafi, Abdullah;
Simons, Ranya;
Bateman, Stuart

Publication type:

Article

Experimental and numerical investigation of residual stresses in proximity girth welds.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1247, doi. 10.1007/s00170-023-11162-1

By:

Bhardwaj, Sachin;
Aas, Sigmund Kyrre;
Ratnayake, R. M. Chandima

Publication type:

Article

Experimental analysis on the influence of the tool micro geometry on the wear behavior in gear hobbing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1279, doi. 10.1007/s00170-023-11158-x

By:

Kühn, Felix;
Hendricks, Steffen;
Troß, Nico;
Brimmers, Jens;
Bergs, Thomas

Publication type:

Article

Intelligent layout optimization of reconfigurable flexible fixture for assembling multiple aircraft panels.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1261, doi. 10.1007/s00170-023-11168-9

By:

Meng, Shuang;
Zheng, Lianyu;
Fan, Wei;
Wang, Xin;
Zhou, Jian

Publication type:

Article

Information-rich quality controls prediction model based on non-destructive analysis for porosity determination of AISI H13 produced by electron beam melting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1159, doi. 10.1007/s00170-023-11153-2

By:

Ghibaudo, Cristian;
Maculotti, Giacomo;
Gobber, Federico;
Saboori, Abdollah;
Galetto, Maurizio;
Biamino, Sara;
Ugues, Daniele

Publication type:

Article

A machine learning model for flank wear prediction in face milling of Inconel 718.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 935, doi. 10.1007/s00170-023-11152-3

By:

Banda, Tiyamike;
Liu, Yu-chen;
Farid, Ali Akhavan;
Lim, Chin Seong

Publication type:

Article

Ladle pouring process parameter and quality estimation using Mask R-CNN and contrast-limited adaptive histogram equalisation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1397, doi. 10.1007/s00170-023-11151-4

By:

O'Donovan, Callum;
Popov, Ivan;
Todeschini, Grazia;
Giannetti, Cinzia

Publication type:

Article

Spiral growth selective laser melting of axisymmetric objects from Cu-Ni–Sn alloy powder: a mass rate efficiency and physical properties study.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1055, doi. 10.1007/s00170-023-11150-5

By:

Ramos-Grez, Jorge Andrés;
Vera-Hoffmann, Javier;
Walczak, Magdalena

Publication type:

Article

High-efficient fabrication of infrared optics with uniform microstructures by a semi-ductile diamond milling approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 919, doi. 10.1007/s00170-023-11140-7

By:

Li, Peizheng;
Wang, Sujuan;
To, Suet;
Sun, Zhanwen;
Jiao, Jie;
Xu, Shijun

Publication type:

Article

On the predictive modeling of surface micro-topography in vibratory polishing of aeronautic gear considering initial workpiece topography.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1553, doi. 10.1007/s00170-023-11134-5

By:

Shao, Wen;
Hou, Yihui;
Tang, Jinyuan;
Liu, Qingsong;
Ding, Han;
Li, Zhengmingqing

Publication type:

Article

Predictive model of surface roughness in milling of 7075Al based on chatter stability analysis and back propagation neural network.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1347, doi. 10.1007/s00170-023-11133-6

By:

Bai, Long;
Cheng, Xin;
Yang, Qizhong;
Xu, Jianfeng

Publication type:

Article

Coupling relationship evaluation between hot extrusion energy consumption and thermal uniformity of extruded profile.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1759, doi. 10.1007/s00170-023-11128-3

By:

Li, Hongcheng;
Lu, Feng;
Cao, Huajun;
Wu, Yuanjie;
Li, Chengchao;
Liu, Lanhui;
Xing, Bin

Publication type:

Article

Development of low content Ti-x%wt. Mg alloys by mechanical milling plus hot isostatic pressing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1733, doi. 10.1007/s00170-023-11126-5

By:

Carvajal, Alex Humberto Restrepo;
Ríos, Jesús María;
Zuleta, Alejandro Alberto;
Bolívar, Francisco Javier;
Castaño, Juan Guillermo;
Correa, Esteban;
Echeverria, Félix;
Lambrecht, Mickaël;
Lasanta, María Isabel;
Trujillo, Francisco Javier Pérez

Publication type:

Article

Replication casting and additive manufacturing for fabrication of cellular aluminum with periodic topology: optimization by CFD simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1789, doi. 10.1007/s00170-023-11124-7

By:

Fernández-Morales, Patricia;
Echeverrí, Lauramaría;
Fandiño, Emigdio Mendoza;
Zuleta Gil, Alejandro Alberto

Publication type:

Article

Efficient compensation method of 5-axis machine tools based on a novel representation of the volumetric error.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1109, doi. 10.1007/s00170-023-11117-6

By:

Cong, Hongdong;
Zha, Jun;
Chen, Yaolong

Publication type:

Article

Challenges and recent progress on the application of rapid sand casting for part production: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 891, doi. 10.1007/s00170-023-11049-1

By:

Oguntuyi, Samson Dare;
Nyembwe, Kasongo;
Shongwe, Mxolisi Brendon;
Mojisola, Tajudeen

Publication type:

Article

Behavior and damage of the near-surface layer of parts pre-machined by the EDM process: Experimental characterization and numerical simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 991, doi. 10.1007/s00170-023-11107-8

By:

Tlili, Adnene;
Ghanem, Farhat;
Sidhom, Habib;
Braham, Chedly

Publication type:

Article

FE simulation, analytical prediction, and experimentation of cutting force in longitudinal vibration-assisted milling (LVAM) during Ti-6Al-4 V cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1417, doi. 10.1007/s00170-023-11092-y

By:

Kurniawan, Rendi;
Ko, Tae Jo;
Han, Pil Wan;
Xu, Moran;
Chen, Jielin;
Kwak, Ye In;
Ali, Saood

Publication type:

Article