Works matching IS 02683768 AND DT 2022 AND VI 120 AND IP 5/6

Results: 88

Efficient drilling of amorphous alloy foils using low-energy long pulses of a Nd:YAG laser.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 4139, doi. 10.1007/s00170-022-09042-1

By:

Tsuji, Takeshi;
Yamamoto, Shota;
Ikemoto, Shun;
Hara, Hiromasa;
Ohta, Motoki;
Nakamura, Daisuke

Publication type:

Article

Investigation on deformation of DP600 steel sheets in electric-pulse triggered energetic materials forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3911, doi. 10.1007/s00170-022-09040-3

By:

Xie, Xueyun;
Yu, Haiping;
Zhong, Yang

Publication type:

Article

The key technologies of machining process design: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 2903, doi. 10.1007/s00170-022-08982-y

By:

Wen, Xiaojian;
Liu, Jinfeng;
Du, Chenxiao;
Qu, Pengfei;
Sheng, Sushan;
Liu, Xiaojun;
Zhou, Honggen;
Kang, Chao;
Chen, Yu;
Dong, Lei

Publication type:

Article

Finite element modeling of melt pool dynamics in laser powder bed fusion of 316L stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3947, doi. 10.1007/s00170-022-09029-y

By:

Trejos-Taborda, Juan;
Reyes-Osorio, Luis;
Garza, Carlos;
del Carmen Zambrano-Robledo, Patricia;
Lopez-Botello, Omar

Publication type:

Article

Development of sustainable antibacterial coatings based on electrophoretic deposition of multilayers: gentamicin-loaded chitosan/gelatin/bioactive glass deposition on PEEK/bioactive glass layer.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3885, doi. 10.1007/s00170-022-09024-3

By:

Rehman, Muhammad Atiq Ur;
Batool, Syeda Ammara

Publication type:

Article

Analytical and experimental investigation on cutting force in longitudinal-torsional coupled rotary ultrasonic machining zirconia ceramics.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 4051, doi. 10.1007/s00170-022-09031-4

By:

Chen, Fan;
Bie, Wenbo;
Chang, Yingli;
Zhao, Bo;
Wang, Xiaobo;
Zhang, Yuemin

Publication type:

Article

Surface integrity of monocrystalline silicon nanostructured with engineered multi-tip diamond tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3983, doi. 10.1007/s00170-022-09023-4

By:

Karpat, Yiğit

Publication type:

Article

Effects of submerged convective cooling in the turning of AZ31 magnesium alloy for tool temperature and wear improvement.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3181, doi. 10.1007/s00170-022-08985-9

By:

Zakaria, Muhammad Syamil;
Mustapha, Mazli;
Azmi, Azwan Iskandar;
Ahmad, Azlan;
Ismail, Sikiru Oluwarotimi;
Shuaib, Norshah Aizat

Publication type:

Article

Gradient structure and mechanical behavior induced by multiple laser peening in 304 austenitic stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3383, doi. 10.1007/s00170-022-08984-w

By:

Sun, Yaofei;
Hou, Zhibao;
Yao, Zhenqiang;
Hu, Yongxiang

Publication type:

Article

Sequential optimization of the injection molding gate locations using parallel efficient global optimization.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3805, doi. 10.1007/s00170-022-09012-7

By:

Hsu, Yuan-Ming;
Jia, Xiaodong;
Li, Wenzhe;
Manganaris, Panayotis;
Lee, Jay

Publication type:

Article

The effect of evaporation and recoil pressure on energy loss and melt pool profile in selective electron beam melting.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 4041, doi. 10.1007/s00170-022-09017-2

By:

Mollamahmutoglu, Mehmet;
Yilmaz, Oguzhan;
Unal, Rahmi;
Gumus, Berkay;
Tan, Evren

Publication type:

Article

Effects of VC additive on cutting compatibility of TiB<sub>2</sub>-based cermet cutting tools and Ti6Al4V alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3757, doi. 10.1007/s00170-022-09010-9

By:

Yuan, Yikun;
Ji, Wenbin;
Dai, Shijie

Publication type:

Article

Investigation of the relationship between voltage and arc length of K-TIG welding under penetrated condition.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3843, doi. 10.1007/s00170-022-09008-3

By:

Wang, Jinyi;
Shi, Yonghua;
Cui, Yanxin;
Wang, Zishun

Publication type:

Article

Simulation and experimental researches on multi-plate rubber pad forming of two-step micro-channel based on different forming driving models.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 4147, doi. 10.1007/s00170-022-09007-4

By:

Teng, Fei;
Wang, Hongyu;
Shi, Shengnan;
Jiang, Lei;
Sun, Juncai;
Sun, Jie;
Di, Hongshuang;
Zhang, Shunhu

Publication type:

Article

Understanding the role of segmentation on process-structure–property predictions made via machine learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 4011, doi. 10.1007/s00170-022-09003-8

By:

Massey, Caroline E.;
Saldana, Christopher J.;
Moore, David G.

Publication type:

Article

Modeling and evaluation of freeform extruded filament based on numerical simulation method for direct ink writing.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3821, doi. 10.1007/s00170-022-08999-3

By:

Tu, Yongqiang;
Hassan, Alaa;
Arrieta-Escobar, Javier A.;
Zaman, Uzair Khaleeq uz;
Siadat, Ali;
Yang, Gongliu

Publication type:

Article

Tribological properties of in situ oxide reinforced nickel matrix composites produced by pressure-assisted sintering.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3731, doi. 10.1007/s00170-022-08998-4

By:

Mameri, Ali;
Daoud, Ismail;
Rezzoug, Amine;
Azem, Said;
Yamanoglu, Ridvan

Publication type:

Article

Numerical analysis of the strip crown inheritance in tandem cold rolling by a novel 3D multi-stand FE model.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3683, doi. 10.1007/s00170-022-08997-5

By:

Li, Lianjie;
Xie, Haibo;
Liu, Tianwu;
Huo, Mingshuai;
Li, Xingsheng;
Liu, Xu;
Wang, Enrui;
Li, Jianxin;
Liu, Hongqiang;
Sun, Li;
Jiang, Zhengyi

Publication type:

Article

Multi-objective process parameters optimization in rapid heat cycle molding incorporating variable packing pressure profile for improving weldline, clamping force, and cycle time.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3669, doi. 10.1007/s00170-022-08994-8

By:

Kitayama, Satoshi;
Tsurita, Shogo;
Takano, Masahiro;
Yamazaki, Yusuke;
Kubo, Yoshikazu;
Aiba, Shuji

Publication type:

Article

Monitoring of casting quality using principal component analysis and self-organizing map.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3599, doi. 10.1007/s00170-022-08993-9

By:

Bendjama, Hocine;
Bouhouche, Salah;
Aouabdi, Salim;
Bast, Jürgen

Publication type:

Article

A data-driven minimum stiffness prediction method for machining regions of aircraft structural parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3609, doi. 10.1007/s00170-022-08991-x

By:

Chen, Jiarui;
Li, Yingguang;
Liu, Xu;
Deng, Tianchi

Publication type:

Article

Core damage mechanism and effects of shaft parts by warm cross-wedge rolling.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3773, doi. 10.1007/s00170-022-08989-5

By:

Xia, Yingxiang;
Shu, Xuedao;
Xu, Sheng;
Chen, Ji

Publication type:

Article

Experimental investigations on the influence of discharge current waveform on processing characteristics and surface integrity in electrical discharge machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3339, doi. 10.1007/s00170-022-08987-7

By:

Wang, Guisen;
Han, Fuzhu;
Zhu, Liang

Publication type:

Article

Constrained abrasive jet polishing with a tangentially aligned nozzle shroud.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 4191, doi. 10.1007/s00170-022-08988-6

By:

Yuan, Qiaoling;
Chen, Xun;
Wen, Donghui

Publication type:

Article

Improving the quality of a circular cooling channel fabrication by fused filament fabrication using Taguchi methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3353, doi. 10.1007/s00170-022-08986-8

By:

Kuo, Chil-Chyuan;
Tasi, Qing-Zhou;
Xie, Bing-Xiu;
Huang, Jun-Ming;
Qiu, Shao-Xuan

Publication type:

Article

Statistical analysis of manufacturing system complexity.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3427, doi. 10.1007/s00170-022-08981-z

By:

Vidal, Germán Herrera;
Hernández, Jairo R. Coronado;
Minnaard, Claudia;
Gatica, Gustavo;
Schwarzenberg, Pablo

Publication type:

Article

An intrinsic parameter calibration method for R-LAT system based on CMM.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3155, doi. 10.1007/s00170-022-08979-7

By:

Su, Wenjun;
Guo, Junkang;
Liu, Zhigang;
Jia, Kang

Publication type:

Article

Effect of ball size and impact velocity on the microstructure and hardness of surface mechanical attrition–treated 304L steel: experiment and finite element simulations.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3251, doi. 10.1007/s00170-022-08978-8

By:

Kumar, Vikesh;
Sharma, Anurag;
Hosmani, Santosh Sattappa;
Singh, Indrasen

Publication type:

Article

Z-map based cutting force prediction for elliptical ultrasonic vibration-assisted milling process.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3237, doi. 10.1007/s00170-022-08976-w

By:

Li, Zhongqun;
Xiao, Jiandong;
Han, Xiong;
Zhang, Weifeng

Publication type:

Article

Forming dependence on spin roller paths for thin-walled complex components from 2195 Al-Li alloy TWBs.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3113, doi. 10.1007/s00170-022-08974-y

By:

Zhang, Hongrui;
Zhan, Mei;
Zheng, Zebang;
Li, Rui;
Ma, Fei;
Cui, Xiaolei;
Chen, Shuwan;
Lei, Yudong

Publication type:

Article

Geometrical defect detection on additive manufacturing parts with curvature feature and machine learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3719, doi. 10.1007/s00170-022-08973-z

By:

Li, Rui;
Jin, Mingzhou;
Pei, Zongrui;
Wang, Dali

Publication type:

Article

Study on double-sided impedance matching of spherical focusing transducer in ultrasonic abrasive flow polishing system.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3287, doi. 10.1007/s00170-022-08972-0

By:

Wei, Li;
Li, Hua;
Wei, Dong

Publication type:

Article

Research on modeling of grinding force in ultrasonic vibration–assisted grinding of 304 stainless steel materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3201, doi. 10.1007/s00170-022-08962-2

By:

Yang, Zhenyu;
Zou, Ping;
Zhou, Liang;
Wang, Xue

Publication type:

Article

Development of human–robot cooperation for assembly using image processing techniques.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3135, doi. 10.1007/s00170-022-08968-w

By:

Dang, Anh-Tuan;
Hsu, Quang-Cherng;
Jhou, Yu-Sin

Publication type:

Article

A machine learning approach for the prediction of melting efficiency in wire arc additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3123, doi. 10.1007/s00170-022-08966-y

By:

Barrionuevo, Germán O.;
Sequeira-Almeida, Pedro M.;
Ríos, Sergio;
Ramos-Grez, Jorge A.;
Williams, Stewart W.

Publication type:

Article

A milling cutting tool selection method for machining features considering energy consumption in the STEP-NC framework.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3963, doi. 10.1007/s00170-022-08964-0

By:

Zhao, Gang;
Cheng, Kang;
Wang, Wei;
Liu, Yazui;
Dan, Zhihua

Publication type:

Article

Experimental study of the dynamic behaviour of loaded polyurethane foam free fall investigation and evaluation of microstructure.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3365, doi. 10.1007/s00170-022-08963-1

By:

Boumdouha, Noureddine;
Safidine, Zitouni;
Boudiaf, Achraf;
Duchet-Rumeau, Jannick;
Gerard, Jean-François

Publication type:

Article

Construction and application of smart factory digital twin system based on DTME.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 4159, doi. 10.1007/s00170-022-08971-1

By:

Xia, Luyao;
Lu, Jianfeng;
Zhang, Hao;
Xu, Mengying;
Li, Zhaojia

Publication type:

Article

On the hot isostatic pressing of Inconel 625 structures built using laser powder bed fusion at higher layer thickness.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 4065, doi. 10.1007/s00170-022-08960-4

By:

Nayak, Saurav Kumar;
Jinoop, Arackal Narayanan;
Paul, Christ Prakash;
Kumar, Vesangi Anil;
Subburaj, Dineshraj;
Singh, Rashmi;
Bindra, Kushvinder Singh

Publication type:

Article

Cutting temperature measurement and prediction in machining processes: comprehensive review and future perspectives.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 2849, doi. 10.1007/s00170-022-08957-z

By:

Pereira Guimarães, Bruno Miguel;
da Silva Fernandes, Cristina Maria;
Amaral de Figueiredo, Daniel;
Correia Pereira da Silva, Filipe Samuel;
Macedo Miranda, Maria Georgina

Publication type:

Article

Optimization of tool geometric parameters for a small fluteless forming tap (FFT).

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3437, doi. 10.1007/s00170-022-08955-1

By:

Wu, Ming-Chang;
Jian, Wei-Rong;
Hsu, Ling-Sheng;
Tsao, Chung-Chen

Publication type:

Article

Environmental and economic sustainability assessment of an industry 4.0 application: the AGV implementation in a food industry.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 2937, doi. 10.1007/s00170-022-08950-6

By:

Stefanini, Roberta;
Vignali, Giuseppe

Publication type:

Article

Assembly line balancing and activity scheduling for customised products manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3925, doi. 10.1007/s00170-022-08953-3

By:

Pilati, Francesco;
Lelli, Giovanni;
Regattieri, Alberto;
Ferrari, Emilio

Publication type:

Article

Novel design concept for shrink-fitted bimetallic sleeve roll in hot rolling mill.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3167, doi. 10.1007/s00170-022-08954-2

By:

Abdul Rafar, Rahimah;
Noda, Nao-Aki;
Tsurumaru, Hiroyuki;
Sano, Yoshikazu;
Takase, Yasushi

Publication type:

Article

A mechanistic model for prediction of exit-chipping width in rotary ultrasonic drilling of sapphire.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3519, doi. 10.1007/s00170-022-08952-4

By:

Lv, Dongxi;
Liu, Dong;
Chen, Mingda;
Chen, Gang;
Yan, Chun;
Ali, Imran;
Zhu, Yingdan

Publication type:

Article

Effect of pressure change in high-speed punch hydraulic system on shear surface quality.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 4207, doi. 10.1007/s00170-022-08938-2

By:

Han, Heyong;
Pan, Siyi;
Zhang, Jianru;
Xu, Huairen;
Li, Chao;
Zhang, Yanjun

Publication type:

Article

Novel hydromechanical reverse drawing method for thin-walled aluminum alloy sheet forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3741, doi. 10.1007/s00170-022-08936-4

By:

You, Dongdong;
Cai, Dongqing;
Wang, Yunhao;
Zhou, Fuqiang;
Ruan, Zonglong

Publication type:

Article

Generating Profiled Diamond Grinding Wheels by 2000 W Fiber Laser: On The Understanding of Laser Ablation Law with High Power and Establishment of a Predictive Model.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3045, doi. 10.1007/s00170-022-08934-6

By:

Rushworth, Adam George Antrum;
Xie, Ke Ge;
Fang, Ben Li;
Shen, Yi Xiu;
Huang, Zhi Pei;
Zhang, Xiang Yu

Publication type:

Article

Case study of a novel multi-actuated optimized reconfigurable freeform surface (MORFS) mold for custom foot orthoses.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3831, doi. 10.1007/s00170-022-08948-0

By:

Qaiser, Zeeshan;
Kunlin, Yang;
Rui, Chen;
Ou, Haihua;
Faraz, Ahmed;
Johnson, Shane

Publication type:

Article

Defect prediction for assembled products: a novel model based on the structural complexity paradigm.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3405, doi. 10.1007/s00170-022-08942-6

By:

Verna, Elisa;
Genta, Gianfranco;
Galetto, Maurizio;
Franceschini, Fiorenzo

Publication type:

Article