Works matching IS 02683768 AND DT 2022 AND VI 119 AND IP 3/4
Results: 89
Correction to: Warm laser shock micro‑heading forming (T2 copper): numerical simulation and experimental research.
- Published in:
- 2022
- By:
- Publication type:
- Correction Notice
Multiscale feature extraction and its application in the weld seam quality prediction for plasma arc welding.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2589, doi. 10.1007/s00170-021-08607-w
- By:
- Publication type:
- Article
Method of ultrasonic nano-crystal surface modification for improvement of surface characteristics of AISI D2 heat-treated with different tempering conditions.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2669, doi. 10.1007/s00170-021-08601-2
- By:
- Publication type:
- Article
Selected aspects of a cold forging process for hollow balls.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2479, doi. 10.1007/s00170-021-08584-0
- By:
- Publication type:
- Article
Synchronous feedrate scheduling for the dual-robot machining of complex surface parts with varying wall thickness.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2653, doi. 10.1007/s00170-021-08512-2
- By:
- Publication type:
- Article
Toward cost-efficient tolerancing of 3D-printed parts: a novel methodology for the development of tolerance-cost models for fused layer modeling.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2461, doi. 10.1007/s00170-021-08488-z
- By:
- Publication type:
- Article
Optimization of an autonomous robotic drilling system for the machining of aluminum aerospace alloys.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2429, doi. 10.1007/s00170-021-08483-4
- By:
- Publication type:
- Article
Toward digital validation for rapid product development based on digital twin: a framework.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2509, doi. 10.1007/s00170-021-08475-4
- By:
- Publication type:
- Article
Machinability investigation of polymer/GNP nanocomposites in micro-milling.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2341, doi. 10.1007/s00170-021-08471-8
- By:
- Publication type:
- Article
Effect of cutting parameters on chips and burrs formation with traditional micromilling and ultrasonic vibration assisted micromilling.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2615, doi. 10.1007/s00170-021-08468-3
- By:
- Publication type:
- Article
Comparative investigation of wire arc additive manufacturing of Al-5%Mg alloy with and without external alternating magnetic field.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2571, doi. 10.1007/s00170-021-08466-5
- By:
- Publication type:
- Article
Evolution of magnetic properties during tempering.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2329, doi. 10.1007/s00170-021-08464-7
- By:
- Publication type:
- Article
Study of static thermal deformation modeling based on a hybrid CNN-LSTM model with spatiotemporal correlation.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2601, doi. 10.1007/s00170-021-08462-9
- By:
- Publication type:
- Article
Minimal AR: visual asset optimization for the authoring of augmented reality work instructions in manufacturing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1769, doi. 10.1007/s00170-021-08449-6
- By:
- Publication type:
- Article
Segmentation phase measuring deflectometry for measuring structured specular surfaces.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2271, doi. 10.1007/s00170-021-08439-8
- By:
- Publication type:
- Article
Mechanistic modeling of cutting forces in high-speed microturning of titanium alloy with consideration of nose radius.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2393, doi. 10.1007/s00170-021-08437-w
- By:
- Publication type:
- Article
From IoT-based cloud manufacturing approach to intelligent additive manufacturing: industrial Internet of Things—an overview.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1461, doi. 10.1007/s00170-021-08436-x
- By:
- Publication type:
- Article
Factors affecting ultimate tensile strength and impact toughness of 3D printed parts using fractional factorial design.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2639, doi. 10.1007/s00170-021-08433-0
- By:
- Publication type:
- Article
Study on arc and TIG welding of earthquake-resistant structural steels with a higher carbon equivalent.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2553, doi. 10.1007/s00170-021-08432-1
- By:
- Publication type:
- Article
A calibration tool for weld penetration depth estimation based on dimensional and thermal sensor fusion.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2145, doi. 10.1007/s00170-021-08428-x
- By:
- Publication type:
- Article
Edge effect reduction in laser bending of DP980 high-strength steel.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1965, doi. 10.1007/s00170-021-08424-1
- By:
- Publication type:
- Article
Active coolant control onto thermal behaviors of precision ball screw unit.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1867, doi. 10.1007/s00170-021-08413-4
- By:
- Publication type:
- Article
Barkhausen Noise monitoring of microstructure and surface residual stress in maraging steel manufactured by Powder Bed Fusion and aging.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1835, doi. 10.1007/s00170-021-08411-6
- By:
- Publication type:
- Article
Research on ultrasonic-assisted multi-point stretch bending process of aluminum profile.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2259, doi. 10.1007/s00170-021-08408-1
- By:
- Publication type:
- Article
Investigation and simulation based on mesoscopic model of SiCp/Al composites during precision machining: deformation mechanism and surface quality.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2173, doi. 10.1007/s00170-021-08407-2
- By:
- Publication type:
- Article
Digital twin-driven CNC spindle performance assessment.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1821, doi. 10.1007/s00170-021-08403-6
- By:
- Publication type:
- Article
Finite element modelling and experimental validation of microstructural changes and hardness variation during gas metal arc welding of AISI 441 ferritic stainless steel.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2629, doi. 10.1007/s00170-021-08401-8
- By:
- Publication type:
- Article
Surface defects inspection of cylindrical metal workpieces based on weakly supervised learning.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1933, doi. 10.1007/s00170-021-08399-z
- By:
- Publication type:
- Article
Shot peening of selective laser-melted SS316L with ultrasonic frequency.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2285, doi. 10.1007/s00170-021-08398-0
- By:
- Publication type:
- Article
Dependence of magnetic properties with structural/microstructural parameters of ball-milled Fe<sub>15</sub>Co<sub>2</sub>P<sub>3</sub> powder mixture.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2089, doi. 10.1007/s00170-021-08397-1
- By:
- Publication type:
- Article
Kriging quick adaptive sampling for multivariate optimization.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2007, doi. 10.1007/s00170-021-08396-2
- By:
- Publication type:
- Article
Probabilistic bearing fault diagnosis using Gaussian process with tailored feature extraction.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2059, doi. 10.1007/s00170-021-08392-6
- By:
- Publication type:
- Article
WED-machining performance by reciprocating molybdenum wire on Inconel 718 with water or hydrocarbon dielectrics.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1853, doi. 10.1007/s00170-021-08386-4
- By:
- Publication type:
- Article
Evaluating the influence of reinforcing fiber type on the grinding process of PEEK's composites.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2187, doi. 10.1007/s00170-021-08384-6
- By:
- Publication type:
- Article
Mechanical performance and microstructural characteristic of gas metal arc welded A606 weathering steel joints.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1921, doi. 10.1007/s00170-021-08383-7
- By:
- Publication type:
- Article
Manufacturing of a natural fiber/glass fiber hybrid reinforced polymer composite (P<sub>x</sub>G<sub>y</sub>E<sup>z</sup>) for high flexural strength: an optimization approach.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2077, doi. 10.1007/s00170-021-08377-5
- By:
- Publication type:
- Article
Sustainability assessment of incremental sheet forming: a review.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1385, doi. 10.1007/s00170-021-08368-6
- By:
- Publication type:
- Article
Influence of tool path strategies on machining time, tool wear, and surface roughness during milling of AISI X210Cr12 steel.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2709, doi. 10.1007/s00170-021-08365-9
- By:
- Publication type:
- Article
Study on minimum rollable thickness in asymmetrical rolling.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2223, doi. 10.1007/s00170-021-08364-w
- By:
- Publication type:
- Article
Part-grouping and build-scheduling with sequence-dependent setup time to minimize the makespan for non-identical parallel additive manufacturing machines.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2247, doi. 10.1007/s00170-021-08361-z
- By:
- Publication type:
- Article
Surface quality adjustment and controlling mechanism of machined surface layer in two-step milling of titanium alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2691, doi. 10.1007/s00170-021-08359-7
- By:
- Publication type:
- Article
Utilizing the water hammer effect to enhance the mechanical properties of AISI 304 welded joints.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2317, doi. 10.1007/s00170-021-08357-9
- By:
- Publication type:
- Article
Viscosity measurements in semi-solid metal processing: current status and recent developments.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1435, doi. 10.1007/s00170-021-08356-w
- By:
- Publication type:
- Article
Modeling of cutting forces in 1-D and 2-D ultrasonic vibration-assisted milling of Ti-6Al-4V.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1807, doi. 10.1007/s00170-021-08355-x
- By:
- Publication type:
- Article
Study on cutting performance of SiCp/Al composite using textured YG8 carbide tool.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2213, doi. 10.1007/s00170-021-08353-z
- By:
- Publication type:
- Article
Laser cutting of 3D printed acrylonitrile butadiene styrene plates for dimensional and surface roughness optimization.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2301, doi. 10.1007/s00170-021-08350-2
- By:
- Publication type:
- Article
A novel approach to enhance mechanical properties during recycling of aluminum alloy scrap through friction stir consolidation.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1989, doi. 10.1007/s00170-021-08346-y
- By:
- Publication type:
- Article
Design and characteristic research of contact probe for high-precision 3D thread-measuring machine.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2235, doi. 10.1007/s00170-021-08345-z
- By:
- Publication type:
- Article
Microstructure and corrosion resistance of stainless steel produced by bypass coupling twin-wire indirect arc additive manufacturing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2159, doi. 10.1007/s00170-021-08343-1
- By:
- Publication type:
- Article
Experimental validation of numerical simulation on deformation behaviour induced by wire arc additive manufacturing with feedstock SS316L on substrate S235.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 1951, doi. 10.1007/s00170-021-08340-4
- By:
- Publication type:
- Article