Works matching IS 02683768 AND DT 2022 AND VI 118 AND IP 7/8

Results: 44

Dissimilar FSW of AA2024 and AA7075: effect of materials positioning and tool deviation value on microstructure, global and local mechanical behavior.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2391, doi. 10.1007/s00170-021-08120-0

By:

Hadji, Idir;
Badji, Riad;
Gaceb, Mohamed;
Cheniti, Billel

Publication type:

Article

Experimental investigations of machining characteristics on polydimethylsiloxane (PDMS) by cryogenic abrasive air-jet machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2711, doi. 10.1007/s00170-021-08147-3

By:

Zhang, Guiguan;
Sun, Yuli;
Liu, Xu;
Gao, Hang;
Zuo, Dunwen

Publication type:

Article

Computing the bond strength of 3D printed polylactic acid scaffolds in mode I and II using experimental tests, finite element method and cohesive zone modeling.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2651, doi. 10.1007/s00170-021-08124-w

By:

Nazemzadeh, Nogol;
Soufivand, Anahita Ahmadi;
Abolfathi, Nabiollah

Publication type:

Article

Study on magnetic abrasive finishing of the inner surface of Ni–Ti alloy cardiovascular stents tube.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2299, doi. 10.1007/s00170-021-08074-3

By:

Deng, Yueming;
Zhao, Yugang;
Zhao, Guoyong;
Gao, Yuewu;
Liu, Guangxin;
Wang, Ke

Publication type:

Article

Numerical-experimental analysis of a modified G-BOP test to evaluate cracks in weld beads in thin sheets.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2559, doi. 10.1007/s00170-021-08121-z

By:

Duarte, Saulo Moretti Araújo;
Pereira, Heitor Abdias da Silva;
Gomes, Kelly Cristiane;
Silva, José Hilton Ferreira da

Publication type:

Article

Influence of the fiber orientation on 3D C/C–SiC composite material and its formation mechanism of the machining surface.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2725, doi. 10.1007/s00170-021-08149-1

By:

Li, Wei;
Long, Gui;
Shi, Feng;
Zhou, Shenlei;
Yin, Jia;
Yang, Jun

Publication type:

Article

Exploring the deformation potential of composite materials processed by incremental sheet forming: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2099, doi. 10.1007/s00170-021-08081-4

By:

Liu, Zhaobing;
Cheng, Kai;
Peng, Kerui

Publication type:

Article

Erosion mechanism and cutting performance of MPCVD multilayer diamond thick film-Si3N4 brazed inserts.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2437, doi. 10.1007/s00170-021-08078-z

By:

Song, Xin;
Wang, Hua;
Wang, Xinchang;
Sun, Fanghong

Publication type:

Article

Micro-machining of additively manufactured metals: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2059, doi. 10.1007/s00170-021-08112-0

By:

Gomes, Milla Caroline;
dos Santos, Aline Gonçalves;
de Oliveira, Déborah;
Figueiredo, Gabriel Viana;
Ribeiro, Kandice Suane Barros;
De Los Rios, Germán Alberto Barragán;
da Silva, Marcio Bacci;
Coelho, Reginaldo Teixeira;
Hung, Wayne N. P.

Publication type:

Article

Enhancement of multilayer perceptron model training accuracy through the optimization of hyperparameters: a case study of the quality prediction of injection-molded parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2247, doi. 10.1007/s00170-021-08109-9

By:

Ke, Kun-Cheng;
Huang, Ming-Shyan

Publication type:

Article

RobMach: G-Code-based off-line programming for robotic machining trajectory generation.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2497, doi. 10.1007/s00170-021-08082-3

By:

Pan, Jiabin;
Fu, Zhongtao;
Xiong, Jiahao;
Lei, Xiaoyu;
Zhang, Ka;
Chen, Xubing

Publication type:

Article

Modeling of contact stress and tool-based frictional forces considering edge effect in cutting Ti-6Al-4 V.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2405, doi. 10.1007/s00170-021-08103-1

By:

Zhang, Weiwei;
Weng, Jian;
Zhuang, Kejia;
Hu, Cheng;
Dai, Xing;
Wu, Chaoqun

Publication type:

Article

Effect of SiCP content on the microstructure and mechanical properties of Fe-based cermets.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2539, doi. 10.1007/s00170-021-08101-3

By:

Sun, Da-ming;
Jiang, Xiao-song;
Sun, Hong-liang;
Fang, Yong-jian;
Song, Ting-feng

Publication type:

Article

Fundamental functions of physical and chemical principles in the polishing of titanium alloys: mechanisms and problems.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2079, doi. 10.1007/s00170-021-08100-4

By:

Hou, Ning;
Wang, Minghai;
Wang, Ben;
Zheng, Yaohui;
Zhou, Siyu;
Song, Ce

Publication type:

Article

Finite element investigation of cutting performance of Cr/W-DLC/DLC composite coated cutting tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2177, doi. 10.1007/s00170-021-08093-0

By:

Du, Jin;
Hao, Tianmei;
Zhang, Xue;
Su, Guosheng;
Zhang, Peirong;
Sun, Yujing;
Zhang, Jingjie;
Xu, Chonghai

Publication type:

Article

Electrically assisted micro-rolling process of surface texture on T2 copper sheets.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2453, doi. 10.1007/s00170-021-08094-z

By:

Zhenhai, Xu;
Shaoxi, Xue;
Chunju, Wang;
Xinwei, Wang;
Jie, Xu;
Debin, Shan;
Bin, Guo

Publication type:

Article

Effect of transverse magnetic field on arc characteristics and droplet transfer during laser-MIG hybrid welding of Ti-6Al-4 V.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2481, doi. 10.1007/s00170-021-08089-w

By:

Yue, Chen;
Yin, Annan;
Huang, Dehua

Publication type:

Article

Numerical simulation of hardfacing remanufacturing for large-scale damaged grinding roller.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2613, doi. 10.1007/s00170-021-08073-4

By:

Tian, Liang;
Xing, Shouhang;
Liu, Guojun;
Luo, Yu

Publication type:

Article

Investigation and process optimization for magnetic abrasive finishing additive manufacturing samples with different forming angles.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2355, doi. 10.1007/s00170-021-08083-2

By:

Zhu, Peixin;
Zhang, Guixiang;
Teng, Xiao;
Du, Jiajing;
Jiang, Linzhi;
Chen, Haoxin;
Liu, Ning

Publication type:

Article

A new technique for identification and evaluation of wear in copper electrodes in electrical discharge machining using acoustic emission signals.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2285, doi. 10.1007/s00170-021-08071-6

By:

Ferreira, Samuel Soares;
Amorim, Fred Lacerda;
Júnior, Jánes Landre;
Maia, Luís Henrique Andrade;
Machado, Álisson Rocha;
Sales, Wisley Falco

Publication type:

Article

Investigation into anti-dust wetting surface with coral-like nanostructures reinforced by electrospun composite nanofibers.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2601, doi. 10.1007/s00170-021-08070-7

By:

Chen, Zhao-Chi;
Chang, Tien-Li;
Lee, Hsin-Sheng;
Fan, Jing-Yuan;
Wang, Chien-Ping

Publication type:

Article

Tool breakage monitoring based on sequential hypothesis test in ultrasonic vibration-assisted drilling of CFRP.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2701, doi. 10.1007/s00170-021-08050-x

By:

Huang, Wenjian;
Cao, Shiyu;
Zhou, Qi;
Wu, Chaoqun

Publication type:

Article

Investigation an assisting electrode powder mixed electrical discharge machining of nonconductive ceramic.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2419, doi. 10.1007/s00170-021-08061-8

By:

Rodic, Dragan;
Gostimirovic, Marin;
Sekulic, Milenko;
Savkovic, Borislav;
Strbac, Branko

Publication type:

Article

Research on Kerf error of aluminum alloy 6061-T6 cut by abrasive water jet.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2513, doi. 10.1007/s00170-021-08056-5

By:

Wang, Shu;
Hu, Dong;
Yang, Fengling;
Lin, Peng

Publication type:

Article

Artificial neural network modelling and optimization of elastic and an-elastic spring back in polymer parts produced through ISF.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2163, doi. 10.1007/s00170-021-08054-7

By:

Hussain, Syed Fawad;
Hussain, Ghulam;
Rahman, Naila

Publication type:

Article

Framework for the design and evaluation of a reconfigurable production system based on movable robot integration.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2373, doi. 10.1007/s00170-021-08030-1

By:

Beauville dit Eynaud, Amélie;
Klement, Nathalie;
Roucoules, Lionel;
Gibaru, Olivier;
Durville, Laurent

Publication type:

Article

Optimal design of blank thickness in superplastic AZ31 alloy to decrease forming time and product weight.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2153, doi. 10.1007/s00170-021-08062-7

By:

Giuliano, Gillo;
Polini, Wilma

Publication type:

Article

Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2017, doi. 10.1007/s00170-021-07990-8

By:

Zhang, Peilei;
Tan, Jie;
Tian, Yingtao;
Yan, Hua;
Yu, Zhishui

Publication type:

Article

Microstructure, mechanical, and tribological properties of Al7075-T6/Ti3AlC2/Al2O3 surface hybrid nanocomposite produced by friction stir processing: A comparison of hybrid ratio.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2205, doi. 10.1007/s00170-021-07997-1

By:

Ahmadifard, Saeed;
Shahin, Nasir;
Vakili-Azghandi, Mojtaba;
Kazemi, Shahab

Publication type:

Article

Product design lifecycle information model (PDLIM).

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2311, doi. 10.1007/s00170-021-07945-z

By:

Niu, Xiaojing;
Wang, Meili;
Qin, Shengfeng

Publication type:

Article

A novel error equivalence model on the kinematic error of the linear axis of high-end machine tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2759, doi. 10.1007/s00170-021-07941-3

By:

LI, Xinxin;
LI, Zhimin;
JIN, Sun;
ZHANG, Jichang;
DING, Siyi;
NIU, Zhihua

Publication type:

Article

Improvement strategy for the geometric accuracy of bead's beginning and end parts in wire-arc additive manufacturing (WAAM).

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2139, doi. 10.1007/s00170-021-08037-8

By:

Wang, Zeya;
Zimmer-Chevret, Sandra;
Léonard, François;
Abba, Gabriel

Publication type:

Article

Optimization of 3D printer enclosure environment.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2233, doi. 10.1007/s00170-021-08034-x

By:

May, Thomas;
Eslami, Babak;
Fouladi, Kamran

Publication type:

Article

The optimal layout design for minimizing operating costs in a picker-to-part warehousing system.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2523, doi. 10.1007/s00170-021-08026-x

By:

Yang, Ming-Feng;
Shih, Po-Hsun;
Pan, Jason Chao-Hsien;
Li, Mei-Chun

Publication type:

Article

Molecular dynamics simulation of interface atomic diffusion in ultrasonic metal welding: Effect of crystal orientation and sliding velocity.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2339, doi. 10.1007/s00170-021-07987-3

By:

Mostafavi, Shimaalsadat;
Bamer, Franz;
Markert, Bernd

Publication type:

Article

Investigation of current-assisted electromagnetic tensile forming for sheet metal.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2221, doi. 10.1007/s00170-021-08025-y

By:

Huang, Changqing;
Liu, Hongsheng;
Cui, Xiaohui;
Xiao, Ang;
Long, Zhengcheng;
Yu, Hailiang

Publication type:

Article

Producing hollow shafts in a new horizontal mill by novel flat-knifing cross-wedge rolling with single guide.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2685, doi. 10.1007/s00170-021-08023-0

By:

Lin, Longfei;
Wang, Baoyu;
Shen, Jinxia;
Liu, Tao

Publication type:

Article

Analysis of cutting performance of the tool based on FEM and grey-fuzzy analytic hierarchy process.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2745, doi. 10.1007/s00170-021-08013-2

By:

Yue, Daxun;
Yue, Caixu;
Liu, Xianli;
Zhang, Anshan;
Li, Mingxing;
Liang, Steven Y.;
Li, Ming

Publication type:

Article

Automated detection-in-depth in industrial control systems.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2467, doi. 10.1007/s00170-021-08001-6

By:

Jadidi, Zahra;
Foo, Ernest;
Hussain, Mukhtar;
Fidge, Colin

Publication type:

Article

In-line monitoring of focus shift by kerf width detection with coaxial thermal imaging during laser cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2587, doi. 10.1007/s00170-021-07893-8

By:

Vasileska, Ema;
Pacher, Matteo;
Previtali, Barbara

Publication type:

Article

Diamond turning of freeform surfaces using non-zero rake angle tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2265, doi. 10.1007/s00170-021-07890-x

By:

Zuo, Chengming;
Meng, Guangwei;
Zhou, Xiaoqin;
Liu, Qiang;
Jiang, Shan;
Zhang, Xu;
Xu, Pengzi;
Zhang, Yunhui;
Zhang, Xiuzhi;
Yan, Guan

Publication type:

Article

Laser welding of current collector foil stacks in battery production–mechanical properties of joints welded with a green high-power disk laser.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2571, doi. 10.1007/s00170-021-07839-0

By:

Grabmann, Sophie;
Kriegler, Johannes;
Harst, Felix;
Günter, Florian J.;
Zaeh, Michael F.

Publication type:

Article

Blockchain applications in PLM towards smart manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2669, doi. 10.1007/s00170-021-07802-z

By:

Chen, Shikang;
Cai, Xinjiang;
Wang, Xingzhi;
Liu, Ang;
Lu, Qinghua;
Xu, Xiwei;
Tao, Fei

Publication type:

Article

Chatter suppression and stability analysis of rotary ultrasonic milling titanium alloy thin-walled workpiece.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2193, doi. 10.1007/s00170-021-07658-3

By:

Sun, Lianjun;
Zheng, Kan;
Liao, Wenhe

Publication type:

Article