Works matching IS 02683768 AND DT 2022 AND VI 118 AND IP 7/8
Results: 44
Influence of the fiber orientation on 3D C/C–SiC composite material and its formation mechanism of the machining surface.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2725, doi. 10.1007/s00170-021-08149-1
- By:
- Publication type:
- Article
Experimental investigations of machining characteristics on polydimethylsiloxane (PDMS) by cryogenic abrasive air-jet machining.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2711, doi. 10.1007/s00170-021-08147-3
- By:
- Publication type:
- Article
Computing the bond strength of 3D printed polylactic acid scaffolds in mode I and II using experimental tests, finite element method and cohesive zone modeling.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2651, doi. 10.1007/s00170-021-08124-w
- By:
- Publication type:
- Article
Numerical-experimental analysis of a modified G-BOP test to evaluate cracks in weld beads in thin sheets.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2559, doi. 10.1007/s00170-021-08121-z
- By:
- Publication type:
- Article
Dissimilar FSW of AA2024 and AA7075: effect of materials positioning and tool deviation value on microstructure, global and local mechanical behavior.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2391, doi. 10.1007/s00170-021-08120-0
- By:
- Publication type:
- Article
Micro-machining of additively manufactured metals: a review.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2059, doi. 10.1007/s00170-021-08112-0
- By:
- Publication type:
- Article
Enhancement of multilayer perceptron model training accuracy through the optimization of hyperparameters: a case study of the quality prediction of injection-molded parts.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2247, doi. 10.1007/s00170-021-08109-9
- By:
- Publication type:
- Article
Modeling of contact stress and tool-based frictional forces considering edge effect in cutting Ti-6Al-4 V.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2405, doi. 10.1007/s00170-021-08103-1
- By:
- Publication type:
- Article
Effect of SiCP content on the microstructure and mechanical properties of Fe-based cermets.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2539, doi. 10.1007/s00170-021-08101-3
- By:
- Publication type:
- Article
Fundamental functions of physical and chemical principles in the polishing of titanium alloys: mechanisms and problems.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2079, doi. 10.1007/s00170-021-08100-4
- By:
- Publication type:
- Article
Electrically assisted micro-rolling process of surface texture on T2 copper sheets.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2453, doi. 10.1007/s00170-021-08094-z
- By:
- Publication type:
- Article
Finite element investigation of cutting performance of Cr/W-DLC/DLC composite coated cutting tool.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2177, doi. 10.1007/s00170-021-08093-0
- By:
- Publication type:
- Article
Effect of transverse magnetic field on arc characteristics and droplet transfer during laser-MIG hybrid welding of Ti-6Al-4 V.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2481, doi. 10.1007/s00170-021-08089-w
- By:
- Publication type:
- Article
Investigation and process optimization for magnetic abrasive finishing additive manufacturing samples with different forming angles.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2355, doi. 10.1007/s00170-021-08083-2
- By:
- Publication type:
- Article
RobMach: G-Code-based off-line programming for robotic machining trajectory generation.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2497, doi. 10.1007/s00170-021-08082-3
- By:
- Publication type:
- Article
Exploring the deformation potential of composite materials processed by incremental sheet forming: a review.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2099, doi. 10.1007/s00170-021-08081-4
- By:
- Publication type:
- Article
Erosion mechanism and cutting performance of MPCVD multilayer diamond thick film-Si<sub>3</sub>N<sub>4</sub> brazed inserts.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2437, doi. 10.1007/s00170-021-08078-z
- By:
- Publication type:
- Article
Study on magnetic abrasive finishing of the inner surface of Ni–Ti alloy cardiovascular stents tube.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2299, doi. 10.1007/s00170-021-08074-3
- By:
- Publication type:
- Article
Numerical simulation of hardfacing remanufacturing for large-scale damaged grinding roller.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2613, doi. 10.1007/s00170-021-08073-4
- By:
- Publication type:
- Article
A new technique for identification and evaluation of wear in copper electrodes in electrical discharge machining using acoustic emission signals.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2285, doi. 10.1007/s00170-021-08071-6
- By:
- Publication type:
- Article
Investigation into anti-dust wetting surface with coral-like nanostructures reinforced by electrospun composite nanofibers.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2601, doi. 10.1007/s00170-021-08070-7
- By:
- Publication type:
- Article
Optimal design of blank thickness in superplastic AZ31 alloy to decrease forming time and product weight.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2153, doi. 10.1007/s00170-021-08062-7
- By:
- Publication type:
- Article
Investigation an assisting electrode powder mixed electrical discharge machining of nonconductive ceramic.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2419, doi. 10.1007/s00170-021-08061-8
- By:
- Publication type:
- Article
Research on Kerf error of aluminum alloy 6061-T6 cut by abrasive water jet.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2513, doi. 10.1007/s00170-021-08056-5
- By:
- Publication type:
- Article
Artificial neural network modelling and optimization of elastic and an-elastic spring back in polymer parts produced through ISF.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2163, doi. 10.1007/s00170-021-08054-7
- By:
- Publication type:
- Article
Tool breakage monitoring based on sequential hypothesis test in ultrasonic vibration-assisted drilling of CFRP.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2701, doi. 10.1007/s00170-021-08050-x
- By:
- Publication type:
- Article
Improvement strategy for the geometric accuracy of bead's beginning and end parts in wire-arc additive manufacturing (WAAM).
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2139, doi. 10.1007/s00170-021-08037-8
- By:
- Publication type:
- Article
Optimization of 3D printer enclosure environment.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2233, doi. 10.1007/s00170-021-08034-x
- By:
- Publication type:
- Article
Framework for the design and evaluation of a reconfigurable production system based on movable robot integration.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2373, doi. 10.1007/s00170-021-08030-1
- By:
- Publication type:
- Article
The optimal layout design for minimizing operating costs in a picker-to-part warehousing system.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2523, doi. 10.1007/s00170-021-08026-x
- By:
- Publication type:
- Article
Investigation of current-assisted electromagnetic tensile forming for sheet metal.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2221, doi. 10.1007/s00170-021-08025-y
- By:
- Publication type:
- Article
Producing hollow shafts in a new horizontal mill by novel flat-knifing cross-wedge rolling with single guide.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2685, doi. 10.1007/s00170-021-08023-0
- By:
- Publication type:
- Article
Analysis of cutting performance of the tool based on FEM and grey-fuzzy analytic hierarchy process.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2745, doi. 10.1007/s00170-021-08013-2
- By:
- Publication type:
- Article
Automated detection-in-depth in industrial control systems.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2467, doi. 10.1007/s00170-021-08001-6
- By:
- Publication type:
- Article
Microstructure, mechanical, and tribological properties of Al7075-T6/Ti<sub>3</sub>AlC<sub>2</sub>/Al<sub>2</sub>O<sub>3</sub> surface hybrid nanocomposite produced by friction stir processing: A comparison of hybrid ratio.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2205, doi. 10.1007/s00170-021-07997-1
- By:
- Publication type:
- Article
Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2017, doi. 10.1007/s00170-021-07990-8
- By:
- Publication type:
- Article
Molecular dynamics simulation of interface atomic diffusion in ultrasonic metal welding: Effect of crystal orientation and sliding velocity.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2339, doi. 10.1007/s00170-021-07987-3
- By:
- Publication type:
- Article
Product design lifecycle information model (PDLIM).
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2311, doi. 10.1007/s00170-021-07945-z
- By:
- Publication type:
- Article
A novel error equivalence model on the kinematic error of the linear axis of high-end machine tool.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2759, doi. 10.1007/s00170-021-07941-3
- By:
- Publication type:
- Article
In-line monitoring of focus shift by kerf width detection with coaxial thermal imaging during laser cutting.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2587, doi. 10.1007/s00170-021-07893-8
- By:
- Publication type:
- Article
Diamond turning of freeform surfaces using non-zero rake angle tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2265, doi. 10.1007/s00170-021-07890-x
- By:
- Publication type:
- Article
Laser welding of current collector foil stacks in battery production–mechanical properties of joints welded with a green high-power disk laser.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2571, doi. 10.1007/s00170-021-07839-0
- By:
- Publication type:
- Article
Blockchain applications in PLM towards smart manufacturing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2669, doi. 10.1007/s00170-021-07802-z
- By:
- Publication type:
- Article
Chatter suppression and stability analysis of rotary ultrasonic milling titanium alloy thin-walled workpiece.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2193, doi. 10.1007/s00170-021-07658-3
- By:
- Publication type:
- Article