Works matching IS 02683768 AND DT 2022 AND VI 118 AND IP 3/4

Results: 44

Dual-frequency ultrasonic cleaning with diluted phosphoric acid solution for removing oxide scale of uncoated steel sheets in hot stamping.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1227, doi. 10.1007/s00170-021-08015-0

By:

Nakamura, Naotaka;
Mori, Ken-ichiro;
Komatsu, Tsuyoshi;
Hayashi, Takafumi;
Suzuki, Takayuki;
Okazaki, Tadashi;
Abe, Yohei

Publication type:

Article

Microstructure and mechanical properties investigation of Ni35A–TiC composite coating deposited on AISI 1045 steel by laser cladding.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1269, doi. 10.1007/s00170-021-08011-4

By:

Zhang, Hao;
Lian, Guofu;
Cao, Qiang;
Pan, Yingjun;
Zhang, Yang

Publication type:

Article

Analysis of the shoe length for continuous pressing equipment with a horizontal rotation axis of impeller.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1295, doi. 10.1007/s00170-021-08009-y

By:

Belyaev, Sergey Vladimirovich;
Gubanov, Ivan Yurievich;
Gorokhov, Yuriy Vasilievich;
Lesiv, Elena Mikhailovna;
Kosovich, Aleksandr Aleksandrovich;
Gubanova, Marina Igorevna;
Potridenny, Vadim Fedorovich;
Shulgin, Anatoly Anatolyevich;
Kaldarumidi, Roman Petrovich;
Goreyavchev, Evgeniy Alekseevich

Publication type:

Article

New directions for inline inspection of automobile laser welds using non-destructive testing.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1183, doi. 10.1007/s00170-021-08007-0

By:

Machado, Miguel Araújo;
Rosado, Luís Filipe Soldado Granadeiro;
Mendes, Nuno Alberto Marques;
Miranda, Rosa Maria Mendes;
dos Santos, Telmo Jorge Gomes

Publication type:

Article

Study on ultrasonic-assisted WECDM of quartz wafer with continuous electrolyte flow.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1061, doi. 10.1007/s00170-021-08006-1

By:

Yang, Chun-Hao;
Tsui, Hai-Ping

Publication type:

Article

Novel drawing system approach to manufacture performant commercially pure aluminium fine wires.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1101, doi. 10.1007/s00170-021-08005-2

By:

Caruso, Serafino;
Ambrogio, Giuseppina

Publication type:

Article

Effect of annealing on formability and mechanical properties of AA1050/Mg-AZ31B bilayer sheets fabricated by explosive welding method.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 775, doi. 10.1007/s00170-021-07999-z

By:

Atifeh, Seyed Mehdi;
Rouzbeh, Amin;
Hashemi, Ramin;
Sedighi, Mohammad

Publication type:

Article

Laser ablation and processing of polycrystalline cubic boron nitride cutting tool material.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 785, doi. 10.1007/s00170-021-07996-2

By:

Jarosz, Krzysztof;
Ukar, Eneko;
Krödel, Alexander;
Özel, Tuğrul

Publication type:

Article

Hammer peening technology—the past, present, and future.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 683, doi. 10.1007/s00170-021-07993-5

By:

Chan, Wai Luen;
Cheng, Henry Kuo Feng

Publication type:

Article

Research on microstructure evolution of the three-roll skew rolling hollow axle.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 837, doi. 10.1007/s00170-021-07991-7

By:

Wang, Jitai;
Shu, Xuedao;
Zhang, Song;
Li, Shuxin;
Pater, Zbigniew;
Xia, Yingxiang;
Bartnicki, Jaroslaw

Publication type:

Article

Investigation into deep hole drilling of austenitic steel with advanced tool solutions.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1087, doi. 10.1007/s00170-021-07989-1

By:

Felinks, Nils;
Rinschede, Timo;
Biermann, Dirk;
Stangier, Dominic;
Tillmann, Wolfgang;
Fuß, Moritz;
Abrahams, Hendrik

Publication type:

Article

Residual stress in laser-based directed energy deposition of aluminum alloy 2024: simulation and validation.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1197, doi. 10.1007/s00170-021-07988-2

By:

Caiazzo, Fabrizia;
Alfieri, Vittorio;
Bolelli, Giovanni

Publication type:

Article

Benchmarking and optimization of robot motion planning with motion planning pipeline.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 949, doi. 10.1007/s00170-021-07985-5

By:

Liu, Shuai;
Liu, Pengcheng

Publication type:

Article

Manufacturing technologies and joining methods of metallic thin-walled pipes for use in high pressure cooling systems.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 667, doi. 10.1007/s00170-021-07982-8

By:

McNair, Sophie A. M.;
Chaharsooghi, Alborz Shokrani;
Carnevale, Mauro;
Rhead, Andrew;
Onnela, Antti;
Daguin, Jerome;
Cichy, Kamil;
Postema, Hans;
Bacchetta, Nicola;
French, Thomas;
Lunt, Alexander J. G.

Publication type:

Article

Investigation on the removal characteristics of single-point cutting high-volume fraction SiCp/Al composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 881, doi. 10.1007/s00170-021-07977-5

By:

Bao, Yong-jie;
Zhang, Xu;
Lu, Shou-xiang;
Zhang, Hong-zhe

Publication type:

Article

A comprehensive review on fabrication of ultra small micro tools via electrical discharge machining-based methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 703, doi. 10.1007/s00170-021-07976-6

By:

Sun, Yao;
Jin, Liya;
Liu, Mingjun;
Gong, Yadong;
Wen, Xuelong;
Yin, Guoqiang;
Wen, Quan

Publication type:

Article

Improving the quality of hole processing in welded products made of dissimilar materials with a new boring tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1027, doi. 10.1007/s00170-021-07975-7

By:

Maksarov, Viaсheslav;
Efimov, Aleksandr;
Olt, Jüri

Publication type:

Article

A blended empirical shot stream velocity model for improvement of shot peening production.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 801, doi. 10.1007/s00170-021-07972-w

By:

Nguyen, Van Bo;
Teo, Augustine;
Ba, Te;
Aramcharoen, Ampara;
Ahluwalia, Kunal;
Kang, Chang Wei

Publication type:

Article

A case study: monitoring and inspection based on IoT for milling process.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1305, doi. 10.1007/s00170-021-07970-y

By:

Ahmad, Maznah Iliyas;
Saif, Yazid;
Yusof, Yusri;
Daud, Md Elias;
Latif, Kamran;
Kadir, Aini Zuhra Abdul

Publication type:

Article

Automatic generation method of 3D process models for shaft parts based on volume decomposition.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1043, doi. 10.1007/s00170-021-07968-6

By:

Zhang, He;
Ge, Xiao-Bo;
Qiu, Yuan-Ying;
Shao, Xiao-Dong

Publication type:

Article

Force model of freeform surface multi-axis machining with fillet end mill based on analytical contact analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1283, doi. 10.1007/s00170-021-07962-y

By:

Guo, Minglong;
Wei, Zhaocheng;
Li, Shiquan;
Wang, Minjie;
Gao, Hang;
Zhao, Zhiwei;
Liu, Shengxian

Publication type:

Article

Effect of electron beam welding parameters on temperature and stress field of AISI P20 tool steel in vacuum roll-cladding process.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 737, doi. 10.1007/s00170-021-07959-7

By:

Mao, Lanyu;
Luo, Zongan;
Feng, Yingying;
Zhang, Xiaoming

Publication type:

Article

Characterization of the physical origins of acoustic emission (AE) from natural fiber reinforced polymers (NFRPs) machining processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 865, doi. 10.1007/s00170-021-07956-w

By:

Wang, Zimo;
Guo, Ruiqi;
Ma, Qiyang;
Chegdani, Faissal;
Tai, Bruce;
El Mansori, Mohamed;
Bukkapatnam, Satish T. S.

Publication type:

Article

Repair of aluminum 6061 plate by additive friction stir deposition.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 759, doi. 10.1007/s00170-021-07953-z

By:

Martin, L. Peter;
Luccitti, Allen;
Walluk, Mark

Publication type:

Article

Tool remaining useful life prediction using deep transfer reinforcement learning based on long short-term memory networks.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1077, doi. 10.1007/s00170-021-07950-2

By:

Yao, Jiachen;
Lu, Baochun;
Zhang, Junli

Publication type:

Article

Experimental study on coupling characteristics of cutting temperature rise and cutting vibration under different tool wear states.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 907, doi. 10.1007/s00170-021-07948-w

By:

Li, Songyuan;
Li, Shuncai;
Hu, Yuting;
Popov, Eugene

Publication type:

Article

Generative design of truss systems by the integration of topology and shape optimisation.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1165, doi. 10.1007/s00170-021-07943-1

By:

Watson, Marcus;
Leary, Martin;
Brandt, Milan

Publication type:

Article

A novel sensitivity analysis of translational axis operation considering key component tolerances.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1255, doi. 10.1007/s00170-021-07932-4

By:

Fan, Jinwei;
Wang, Peitong;
Ren, Xingfei

Publication type:

Article

A thermal deformation prediction method for grinding machine' spindle.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1125, doi. 10.1007/s00170-021-07931-5

By:

Fan, Jinwei;
Wang, Peitong;
Tao, Haohao;
Pan, Ri

Publication type:

Article

An integrated design method for remanufacturing process based on performance demand.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 849, doi. 10.1007/s00170-021-07923-5

By:

Ke, Chao;
Jiang, Zhigang;
Zhu, Shuo;
Wang, Yan

Publication type:

Article

Mechanism of 6061 aluminum material erosion in USEMM.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 895, doi. 10.1007/s00170-021-07914-6

By:

Tong, Wenjun;
He, Kailei;
Wang, Xindi;
Xu, Xuefeng;
Wang, Minghuan

Publication type:

Article

Coordinate control of strip thickness-crown-tension based on inverse linear quadratic in tandem hot rolling mill.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1213, doi. 10.1007/s00170-021-07912-8

By:

Ji, Yafeng;
Yuan, Hao;
Song, Lebao;
Li, Huaying;
Peng, Wen;
Sun, Jie

Publication type:

Article

Layer-wise relevance propagation for interpreting LSTM-RNN decisions in predictive maintenance.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 963, doi. 10.1007/s00170-021-07911-9

By:

Wu, Haiyue;
Huang, Aihua;
Sutherland, John W.

Publication type:

Article

Influences of expanding angles on extrusion-shearing-expanding processing of AZ31 magnesium alloy thin-walled tubes.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 751, doi. 10.1007/s00170-021-07898-3

By:

Tian, Ye;
Hu, Hongjun;
Liang, Pengcheng;
Zhang, Dingfei;
Ou, Zhongwen

Publication type:

Article

Dissimilar welding of aluminum alloys 2024 T3 and 7075 T6 by TIG process with double tungsten electrodes.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 937, doi. 10.1007/s00170-021-07888-5

By:

Kaba, Liamine;
Djeghlal, Mohammed Elamine;
Ouallam, Seddik;
Kahla, Sami

Publication type:

Article

Understanding the surface integrity of laser surface engineered tungsten carbide.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1141, doi. 10.1007/s00170-021-07885-8

By:

Hazzan, Kafayat Eniola;
Pacella, Manuela;
See, Tian Long

Publication type:

Article

Fabrication of hydrophobic surface on Ti6Al4V by WEDM process for surgical instruments and bioimplants.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1111, doi. 10.1007/s00170-021-07857-y

By:

Prakash, Ved;
Priyadarshni, Nivedita;
Das, Alok Kumar;
Chattopadhyay, Somnath

Publication type:

Article

Development of an empirical process model for adjusted porosity in laser-based powder bed fusion of Ti-6Al-4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1239, doi. 10.1007/s00170-021-07847-0

By:

Emminghaus, Nicole;
Paul, Johanna;
Hoff, Christian;
Hermsdorf, Jörg;
Kaierle, Stefan

Publication type:

Article

Cutting tool prognostics enabled by hybrid CNN-LSTM with transfer learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 817, doi. 10.1007/s00170-021-07784-y

By:

Marei, Mohamed;
Li, Weidong

Publication type:

Article

New insights on manipulating the material removal characteristics of Jet-Electrochemical machining through nozzle design.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1009, doi. 10.1007/s00170-021-07777-x

By:

Kendall, Thomas;
Diver, Carl;
Gillen, David;
Bartolo, Paulo

Publication type:

Article

Mechanical and energy absorption properties of functionally graded lattice structures based on minimal curved surfaces.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 995, doi. 10.1007/s00170-021-07768-y

By:

Ma, Xiangyu;
Zhang, David Z.;
Zhao, Miao;
Jiang, Junjie;
Luo, Fangqiong;
Zhou, Hailun

Publication type:

Article

Characterization of Thrust Force, Temperature, Chip Morphology and Power in Ultrasonic-assisted Drilling of Aluminium 6061.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 979, doi. 10.1007/s00170-021-07742-8

By:

Moghaddas, Amin

Publication type:

Article

Tool wear prediction using a hybrid of tool chip image and evolutionary fuzzy neural network.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 921, doi. 10.1007/s00170-021-07291-0

By:

Lin, Cheng-Jian;
Jhang, Jyun-Yu;
Chen, Shao-Hsien

Publication type:

Article

A novel scheme with high accuracy and high efficiency for surface location error prediction.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 3/4, p. 1317, doi. 10.1007/s00170-021-07153-9

By:

Dai, Yuebang;
Li, Hongkun;
Peng, Defeng;
Fan, Zhenfang;
Yang, Guowei

Publication type:

Article