Works matching IS 02683768 AND DT 2021 AND VI 117 AND IP 7/8

Results: 49

ACMT - conference on Advanced and Competitive Manufacturing Technologies in Moscow.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2011, doi. 10.1007/s00170-021-07651-w

By:

Kutin, Andrey;
Wegener, Konrad

Publication type:

Article

Special issue: ACMT - conference on Advanced and Competitive Manufacturing Technologies in Moscow.

Published in:: 2021
Publication type:: Correction Notice

Process characterization and analysis of ceramic powder bed fusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2105, doi. 10.1007/s00170-021-07625-y

By:

Florio, Kevin;
Puccio, Dario;
Viganò, Giorgio;
Pfeiffer, Stefan;
Verga, Fabrizio;
Grasso, Marco;
Colosimo, Bianca Maria;
Graule, Thomas;
Wegener, Konrad

Publication type:

Article

Action recognition for the robotics and manufacturing automation using 3-D binary micro-block difference.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2319, doi. 10.1007/s00170-021-07613-2

By:

Voronin, Viacheslav;
Zhdanova, Marina;
Semenishchev, Evgenii;
Zelenskii, Aleksander;
Cen, Yigang;
Agaian, Sos

Publication type:

Article

Development of elastic–plastic model of additively produced titanium for personalised endoprosthetics.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2117, doi. 10.1007/s00170-021-07460-1

By:

Borovkov, Alexey;
Maslov, Leonid;
Tarasenko, Fedor;
Zhmaylo, Mikhail;
Maslova, Irina;
Solovev, Dmitry

Publication type:

Article

Design of a contactless powered and piezoelectric-actuated tool for non-resonant low-frequency vibration-assisted machining of brittle-hard materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2243, doi. 10.1007/s00170-021-07436-1

By:

Brier, Jens;
Bleicher, Friedrich

Publication type:

Article

A study on power-controlled wire-arc additive manufacturing using a data-driven surrogate model.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2133, doi. 10.1007/s00170-021-07358-y

By:

Israr, Rameez;
Buhl, Johannes;
Bambach, Markus

Publication type:

Article

Design optimization of aircraft structures using virtual proving ground.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2457, doi. 10.1007/s00170-021-07355-1

By:

Gorskii, Yuriy;
Gavrilov, Petr;
Nikitin, Georgiy;
Pautova, Tatiana;
Tamm, Aleksandr

Publication type:

Article

Control of the machine tools with variable kinematics.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2331, doi. 10.1007/s00170-021-07339-1

By:

Martinov, Georgi M.;
Sokolov, Sergey V.;
Pushkov, Roman L.;
Obukhov, Aleksandr I.;
Evstafieva, Svetlana V.

Publication type:

Article

Buildup forming on tools at mechanical metal surface-hardening.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2237, doi. 10.1007/s00170-021-07334-6

By:

Egorov, Sergey;
Olejnik, Andrej;
Kapitanov, Alexey;
Alexandrov, Islam

Publication type:

Article

Electrode wear pattern during EDM milling of Inconel 718.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2369, doi. 10.1007/s00170-021-07327-5

By:

Kliuev, Mikhail;
Kutin, Andrey;
Wegener, Konrad

Publication type:

Article

A VR-based approach in conducting MTM for manual workplaces.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2501, doi. 10.1007/s00170-021-07260-7

By:

Gorobets, Valentina;
Holzwarth, Valentin;
Hirt, Christian;
Jufer, Noëlle;
Kunz, Andreas

Publication type:

Article

An influence of slag refining on the structure and mechanical properties of the brass CuZn39Pb2.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2519, doi. 10.1007/s00170-021-07321-x

By:

Jenek, Mariusz;
Schlafka, Paweł

Publication type:

Article

Method for clustering and identification of objects in laser scanning point clouds using dynamic logic.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2309, doi. 10.1007/s00170-021-07286-x

By:

Milanov, Yevgeny;
Badenko, Vladimir;
Yadykin, Vladimir;
Perlovsky, Leonid

Publication type:

Article

Dynamic support stiffness of motorized spindle bearings under high-speed rotation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2359, doi. 10.1007/s00170-021-07282-1

By:

Tian, Shengli;
Zhao, Xingxin;
Dong, Shaojiang

Publication type:

Article

International Conference on Advanced and Competitive Manufacturing Technologies milling tool wear prediction using unsupervised machine learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2213, doi. 10.1007/s00170-021-07281-2

By:

Gittler, Thomas;
Glasder, Magnus;
Öztürk, Elif;
Lüthi, Michel;
Weiss, Lukas;
Wegener, Konrad

Publication type:

Article

Grain flash temperatures in diamond wire sawing of silicon.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2227, doi. 10.1007/s00170-021-07298-7

By:

Pala, Uygar;
Süssmaier, Stefan;
Wegener, Konrad

Publication type:

Article

Substantiation of the technology for controlling the process of low-temperature plasma modification of metal product surface layer by the electrical signal parameters.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2405, doi. 10.1007/s00170-021-07258-1

By:

Martynov, Vladimir Vasilievich;
Brzhozovskii, Boris Maksovich;
Zinina, Elena Petrovna;
Sussky, Aleksandr Vladimirovich

Publication type:

Article

Automation technology as a key component of the Industry 4.0 production development path.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2287, doi. 10.1007/s00170-021-07246-5

By:

Brecher, Christian;
Müller, Aleksandra;
Dassen, Yannick;
Storms, Simon

Publication type:

Article

Machine learning and simulation-based surrogate modeling for improved process chain operation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2297, doi. 10.1007/s00170-021-07084-5

By:

Hürkamp, André;
Gellrich, Sebastian;
Dér, Antal;
Herrmann, Christoph;
Dröder, Klaus;
Thiede, Sebastian

Publication type:

Article

Flexural quasi-static and fatigue behaviours of fused filament deposited PA6 and PA12 polymers.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2041, doi. 10.1007/s00170-021-07223-y

By:

Svetlana, Terekhina;
Tatiana, Tarasova;
Sergei, Egorov;
Innokentiy, Skornyakov;
Laurent, Guillaumat;
Lamine, Hattali

Publication type:

Article

Investigations on digitalization for sustainable machine tools and forming technologies.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2269, doi. 10.1007/s00170-021-07182-4

By:

Klimant, Philipp;
Koriath, Hans-Joachim;
Schumann, Marco;
Winkler, Sven

Publication type:

Article

Method for residual strain modeling taking into account mold and distribution of heat transfer coefficients for thermoset composite material parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2429, doi. 10.1007/s00170-021-07149-5

By:

Kiauka, Mikhail;
Kasatkin, Mikhail;
Tcygantceva, Iuliia;
Efimov-Soini, Nikolai;
Borovkov, Alexey

Publication type:

Article

Design optimization of multimorphology surface-based lattice structures with density gradients.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2013, doi. 10.1007/s00170-021-07175-3

By:

Shi, Xin;
Liao, Wenhe;
Liu, Tingting;
Zhang, Changdong;
Li, Dawei;
Jiang, Weiming;
Wang, Cong;
Ren, Fangxi

Publication type:

Article

Influence of the frequency of pulsating high-pressure cutting fluid jets on the resulting chip length and surface finish.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2185, doi. 10.1007/s00170-021-07177-1

By:

Splettstoesser, Antonia;
Schraknepper, Daniel;
Bergs, Thomas

Publication type:

Article

Friction stir welding of AA2024-T3: development of numerical simulation considering thermal history and heat generation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2481, doi. 10.1007/s00170-021-07184-2

By:

Amini, Cyrus;
Hasanifard, Soran;
Zehsaz, Mohammad;
Jerez-Mesa, Ramón;
Travieso-Rodriguez, J. Antonio

Publication type:

Article

An experimental investigation on Inconel 718 interrupted cutting with ceramic solid end mills.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2173, doi. 10.1007/s00170-021-07148-6

By:

Parenti, Paolo;
Puglielli, Francesco;
Goletti, Massimo;
Annoni, Massimiliano;
Monno, Michele

Publication type:

Article

Implementation specifics and application potential of digital twins of technological systems.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2279, doi. 10.1007/s00170-021-07141-z

By:

Brovkova, Marina;
Molodtsov, Vladimir;
Bushuev, Victor

Publication type:

Article

The research of the agglomeration process during the formation of an abrasive-polymer compound for waterjet cutting in a fluidized bed installation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2511, doi. 10.1007/s00170-021-07140-0

By:

Kozhus, Olga;
Barsukov, Gennady

Publication type:

Article

Effect of metal foam on vibration damping and its modelling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2349, doi. 10.1007/s00170-021-07172-6

By:

Albertelli, Paolo;
Esposito, Stefano;
Mussi, Valerio;
Goletti, Massimo;
Monno, Michele

Publication type:

Article

Extrusion-based additive manufacturing of forming and molding tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2059, doi. 10.1007/s00170-021-07162-8

By:

Strano, Matteo;
Rane, Kedarnath;
Farid, Muhammad Asad;
Mussi, Valerio;
Zaragoza, Veronica;
Monno, Michele

Publication type:

Article

Experimental investigation of the effects of cryogenic cooling on tool life in Ti6Al4V milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2149, doi. 10.1007/s00170-021-07161-9

By:

Albertelli, Paolo;
Mussi, Valerio;
Strano, Matteo;
Monno, Michele

Publication type:

Article

Effect of acoustic excitation on fiber-reinforced polypropylene and the influence on melt viscosity.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2395, doi. 10.1007/s00170-021-07158-4

By:

Heinrich, Michael;
Decker, Ricardo;
Reindel, Paul;
Böttcher, Katja;
Roth-Panke, Isabelle;
Kroll, Lothar

Publication type:

Article

The role of scanning velocity on laser cladding of NiTi alloy onto stainless steel 316L substrate.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2029, doi. 10.1007/s00170-021-07112-4

By:

Zarghami, Kian;
Khademzadeh, Saeed;
Parvin, Nader;
Azarmehr, Yashar

Publication type:

Article

Creation of CNC system's components for monitoring machine tool health.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2341, doi. 10.1007/s00170-021-07107-1

By:

Martinova, Liliya I.;
Kozak, Nikolay V.;
Kovalev, Ilya A.;
Ljubimov, Aleksandr B.

Publication type:

Article

Experimental investigation of the machining characteristics in diamond wire sawing of unidirectional CFRP.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2197, doi. 10.1007/s00170-021-07146-8

By:

Seeholzer, Lukas;
Süssmaier, Stefan;
Kneubühler, Fabian;
Wegener, Konrad

Publication type:

Article

Multivariate manufacturing process planning for aircraft airframe production based on weighted criteria analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2263, doi. 10.1007/s00170-021-07144-w

By:

Kutin, Andrey;
Turkin, Mikhail;
Kliuev, Mikhail

Publication type:

Article

Experimental comparative investigation on creep behavior of mineral cast, ultra-high-performance concrete, and natural stone for precision machinery structures.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2073, doi. 10.1007/s00170-021-07118-y

By:

Relea, Eduard;
Pfyffer, Benjamin;
Weiss, Lukas;
Wegener, Konrad

Publication type:

Article

Influence of packing density and fillers on thermal conductivity of polymer powders for additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2049, doi. 10.1007/s00170-021-07117-z

By:

Sillani, Francesco;
de Gasparo, Fabian;
Schmid, Manfred;
Wegener, Konrad

Publication type:

Article

Grinding efficiency and profile accuracy of diamond grinding wheels dressed with wire electrical discharge conditioning (WEDC).

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2163, doi. 10.1007/s00170-021-07114-2

By:

Zahedi, Ali;
Khosravi, Jahangir;
Azarhoushang, Bahman

Publication type:

Article

Residual stress reduction of LPBF-processed CM247LC samples via multi laser beam strategies.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2093, doi. 10.1007/s00170-021-07083-6

By:

Gerstgrasser, Marcel;
Cloots, Michael;
Stirnimann, Josef;
Wegener, Konrad

Publication type:

Article

The effect of laser shock processing on mechanical properties of an advanced powder material depending on different ablative coatings and confinement medias.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2377, doi. 10.1007/s00170-021-07080-9

By:

Yang, Yuqi;
Lu, Ying;
Qiao, Hongchao;
Zhao, Jibin;
Sun, Boyu;
Wu, Jiajun;
Hu, Xianliang

Publication type:

Article

Low-temperature plasma technique for skin structure consolidation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2387, doi. 10.1007/s00170-021-07041-2

By:

Martynov, Vladimir Vasilievich;
Brzhozovskii, Boris Maksovich;
Azikov, Nikolay Sergeevich;
Brovkova, Marina Borisovna;
Zinina, Elena Petrovna

Publication type:

Article

WEDM single crater asymmetry.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2421, doi. 10.1007/s00170-021-07023-4

By:

Esteves, Paulo M. B.;
Wiessner, Moritz;
Costa, João V. M. R.;
Sikora, Maria;
Wegener, Konrad

Publication type:

Article

Combined robot-based manufacturing and machining of multi-material components.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2255, doi. 10.1007/s00170-021-07008-3

By:

Droß, Marcel;
Albergt, Max;
David, Martin;
Reichler, Ann-Kathrin;
Hoffmeister, Hans-Werner;
Dröder, Klaus

Publication type:

Article

Development of algorithms for the formation and placement of N-dimensional orthogonal polyhedrons into containers of complex geometric shape.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2467, doi. 10.1007/s00170-021-06974-y

By:

Chekanin, Vladislav A.;
Chekanin, Alexander V.

Publication type:

Article

Effect of clad height, substrate thickness and scanning pattern on cantilever distortion in direct metal deposition.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2083, doi. 10.1007/s00170-021-06925-7

By:

Soffel, Fabian;
Eisenbarth, Daniel;
Wegener, Konrad

Publication type:

Article

Correction to: geometry assessment of ultra-short pulsed laser drilled micro-holes.

Published in:

2021

By:

Putzer, Matthias;
Ackerl, Norbert;
Wegener, Konrad

Publication type:

Correction Notice

Geometry assessment of ultra-short pulsed laser drilled micro-holes.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 7/8, p. 2445, doi. 10.1007/s00170-020-06199-5

By:

Putzer, Matthias;
Ackerl, Norbert;
Wegener, Konrad

Publication type:

Article