Works matching IS 02683768 AND DT 2021 AND VI 117 AND IP 5/6

Results: 46

Correction to: Predicting the martensite content of metastable austenitic steels after cryogenic turning using machine learning.

Published in:

2021

By:

Glatt, Moritz;
Hotz, Hendrik;
Kölsch, Patrick;
Mukherjee, Avik;
Kirsch, Benjamin;
Aurich, Jan C.

Publication type:

Correction Notice

Correction to: A system framework of model quality analysis for product model in collaborative manufacturing.

Published in:

2021

By:

Yang, Wei;
Zhao, Qing;
Yan, Xiaoguang;
Chen, Zhuoning

Publication type:

Correction Notice

Study on deformation and compensation for micromilled thin walls with high aspect ratios.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1797, doi. 10.1007/s00170-021-07833-6

By:

Li, Yang;
Cheng, Xiang;
Ling, Siying;
Zheng, Guangming;
He, Lei

Publication type:

Article

Crowdsourced manufacturing cyber platform and intelligent cognitive assistants for delivery of manufacturing as a service: fundamental issues and outlook.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1997, doi. 10.1007/s00170-021-07789-7

By:

Gong, Xuejian;
Jiao, Roger;
Jariwala, Amit;
Morkos, Beshoy

Publication type:

Article

Parametric analysis of turning HSLA steel under minimum quantity lubrication (MQL) and nanofluids-based minimum quantity lubrication (NF-MQL): a concept of one-step sustainable machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1915, doi. 10.1007/s00170-021-07776-y

By:

Javid, Hassan;
Jahanzaib, Mirza;
Jawad, Muhammad;
Ali, Muhammad Asad;
Farooq, Muhammad Umar;
Pruncu, Catalin I.;
Hussain, Salman

Publication type:

Article

Improved hole wall roughness and corrosion resistance of U-shaped hole prepared by casting.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1557, doi. 10.1007/s00170-021-07771-3

By:

Li, Guanglong;
Cao, Yang;
Qu, Yingdong;
Chen, Ruirun;
Li, Rongde;
Nie, Sainan;
Tian, Chang

Publication type:

Article

A novel AE algorithm-based approach for the detection of cracks in spot welding in view of online monitoring: case study.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1807, doi. 10.1007/s00170-021-07848-z

By:

Yaacoubi, Slah;
Dahmene, Fethi;
El Mountassir, Mahjoub;
Bouzenad, Abd Ennour

Publication type:

Article

Chatter stability prediction and detection during high-speed robotic milling process based on acoustic emission technique.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1589, doi. 10.1007/s00170-021-07844-3

By:

Li, Maojun;
Huang, Dingxiao;
Yang, Xujing

Publication type:

Article

Influence of compression coil geometry in electromagnetic forming using experimental and finite element method.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1945, doi. 10.1007/s00170-021-07832-7

By:

Soni, Manoj;
Ahmed, Meraj;
Panthi, Sanjay Kumar;
Kumar, Surendra;
Gavel, Khushwant Singh

Publication type:

Article

The effect of using repetitively pulsed laser radiation in selective laser melting when creating a metal-matrix composite Ti-6Al-4V–B<sub>4</sub>C.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1891, doi. 10.1007/s00170-021-07842-5

By:

Golyshev, Alexander;
Malikov, Alexander;
Orishich, Anatoliy;
Gulov, Mikhail;
Ancharov, Alexei

Publication type:

Article

Analysis of discharge channel characteristics based on three-phase flow dielectric characteristics in USV-MF assisted WEDM-LS.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1871, doi. 10.1007/s00170-021-07841-6

By:

Wang, Yan;
Yang, Jie;
Xiong, Wei;
Chai, Hua-Yi;
Wang, Rui

Publication type:

Article

Big data/analytics platform for Industry 4.0 implementation in advanced manufacturing context.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1959, doi. 10.1007/s00170-021-07834-5

By:

Bonnard, Renan;
Arantes, Márcio Da Silva;
Lorbieski, Rodolfo;
Vieira, Kléber Magno Maciel;
Nunes, Marcelo Canzian

Publication type:

Article

Development of innovative automated solutions for the assembly of multifunctional thermoplastic composite fuselage.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1721, doi. 10.1007/s00170-021-07829-2

By:

Omairey, Sadik L.;
Sampethai, Sofia;
Hans, Luka;
Worrall, Chris;
Lewis, Stuart;
Negro, Daniele;
Sattar, Tariq;
Ferrera, Eduardo;
Blanco, Elena;
Wighton, John;
Muijs, Leo;
Veldman, Sebastiaan L.;
Doldersum, Marco;
Tonnaer, Rik;
Jayasree, Nithin;
Kazilas, Mihalis

Publication type:

Article

Multi-objective integrated optimization of tool geometry angles and cutting parameters for machining time and energy consumption in NC milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1427, doi. 10.1007/s00170-021-07772-2

By:

Zhao, Junhua;
Li, Li;
Nie, Hua;
Chen, Xingzheng;
Liu, Jiwei;
Shu, Xin

Publication type:

Article

Analytical, FEA, and experimental research of 2D-Vibration Assisted Cutting (2D-VAC) in titanium alloy Ti6Al4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1739, doi. 10.1007/s00170-021-07831-8

By:

Kurniawan, Rendi;
Ahmed, Farooq;
Ali, Saood;
Park, Gun Chul;
Ko, Tae Jo

Publication type:

Article

Robust generation of the delta volume for the damaged area of a part using the marching cubes algorithm to support additive manufacturing–based part maintenance.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1473, doi. 10.1007/s00170-021-07828-3

By:

Kim, Youngki;
Cha, Moohyun;
He, Fazhi;
Mun, Duhwan

Publication type:

Article

Sensor-integrated tap holder for process uncertainty detection based on tool vibration and axial length compensation sensors.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1905, doi. 10.1007/s00170-021-07825-6

By:

Öztürk, Tuğrul;
Sarıkaya, Erkut;
Weigold, Matthias

Publication type:

Article

The microstructure formation of thick Zr-based amorphous alloy with anode vibration in HClO<sub>4</sub> solution by WECMM.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1459, doi. 10.1007/s00170-021-07822-9

By:

Yusen, Hang;
Yongbin, Zeng;
Tao, Yang;
Zhengyang, Xu;
Kun, Xu;
Huimin, Wang

Publication type:

Article

Grinding performance evaluation of 3D-printed porous metal-bonded grinding wheel in BK7 glass grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1445, doi. 10.1007/s00170-021-07819-4

By:

Wang, Chao;
Wang, Dong;
Tian, Chenchen;
Wang, Liping;
Rong, Yiming;
Li, Xuekun

Publication type:

Article

A path generation method for wire and arc additive remanufacturing of complex hot forging dies.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1935, doi. 10.1007/s00170-021-07813-w

By:

Shen, Yonghua;
Wei, Yanhong;
Liu, Renpei

Publication type:

Article

A high-dynamic-range visual sensing method for feature extraction of welding pool based on adaptive image fusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1675, doi. 10.1007/s00170-021-07812-x

By:

Zhang, Baori;
Shi, Yonghua;
Cui, Yanxin;
Wang, Zishun;
Chen, Xiyin

Publication type:

Article

Combining PMEDM with the tool electrode sloshing to reduce recast layer of titanium alloy generated from EDM.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1535, doi. 10.1007/s00170-021-07808-7

By:

Xu, Bin;
Lian, Man-qun;
Chen, Sheng-gui;
Lei, Jian-guo;
Wu, Xiao-yu;
Guo, Cheng;
Peng, Tai-jiang;
Yang, Jun;
Luo, Feng;
Zhao, Hang

Publication type:

Article

Modeling, identification, and measurement of geometric errors for a rotary axis of a machine tool using a new R-test.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1491, doi. 10.1007/s00170-021-07811-y

By:

Pu, Yaozhou;
Wang, Ling;
Yin, Ming;
Yin, Guofu;
Xie, Luofeng

Publication type:

Article

A prediction model of drilling force in CFRP internal chip removal hole drilling based on support vector regression.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1505, doi. 10.1007/s00170-021-07766-0

By:

Xu, Chengyang;
Yao, Songyang;
Wang, Gongdong;
Wang, Yiwen;
Xu, Jiazhong

Publication type:

Article

Manufacturing of a 3D finned tube for enhanced boiling and condensation using rolling-cutting-extruding composite forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1859, doi. 10.1007/s00170-021-07801-0

By:

Huang, Xiaofang;
Chen, Hanping;
Wan, Zhenping;
Lu, Longsheng;
Zhu, Hongguan;
Tang, Yong

Publication type:

Article

Research on drilling CFRP laminate with a thin woven glass fiber surface layer using plane rake–faced twist drill.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1781, doi. 10.1007/s00170-021-07796-8

By:

Liu, Liping;
Lian, Bo;
Zhou, Changgeng;
Duan, Kehao;
Zhu, Xueming;
Xia, Pingfeng

Publication type:

Article

A tolerance analysis method for complex mechanical products based on meta-action unit.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1377, doi. 10.1007/s00170-021-07790-0

By:

Jian, Li;
Yan, Ran;
Hongwei, Wang;
Zongyi, Mu;
Genbao, Zhang

Publication type:

Article

Assessing product quality from the production process logs.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1615, doi. 10.1007/s00170-021-07764-2

By:

Duong, Le Toan;
Travé-Massuyès, Louise;
Subias, Audine;
Roa, Nathalie Barbosa

Publication type:

Article

A multiobjective optimization of the welding process in aluminum alloy (AA) 6063 T4 tubes used in corona rings through normal boundary intersection and multivariate techniques.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1517, doi. 10.1007/s00170-021-07761-5

By:

Luz, Eduardo Rivelino;
Romão, Estevão Luiz;
Streitenberger, Simone Carneiro;
Mancilha, Leonardo Ribeiro;
de Paiva, Anderson Paulo;
Balestrassi, Pedro Paulo

Publication type:

Article

A new PIV method to measure powder flow velocity in laser metal deposition: an Eulerian-based approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1825, doi. 10.1007/s00170-021-07730-y

By:

García-Moreno, Angel-Iván;
Alvarado-Orozco, Juan-Manuel;
Ibarra-Medina, Juansethi;
López-Martínez, Aldo;
Martínez-Franco, Enrique

Publication type:

Article

Investigation of forging performance for AA6082.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1645, doi. 10.1007/s00170-021-07726-8

By:

Tunc, Ozkan;
Kacar, Ilyas;
Ozturk, Fahrettin

Publication type:

Article

Tensile properties of the FFF-processed thermoplastic polyurethane (TPU) elastomer.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1709, doi. 10.1007/s00170-021-07712-0

By:

Arifvianto, Budi;
Iman, Teguh Nur;
Prayoga, Benidiktus Tulung;
Dharmastiti, Rini;
Salim, Urip Agus;
Mahardika, Muslim;
Suyitno

Publication type:

Article

Experimental and numerical investigations of oxide-related defects in Al alloy gravity die castings.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1765, doi. 10.1007/s00170-021-07680-5

By:

Scampone, Giulia;
Pirovano, Raul;
Mascetti, Stefano;
Timelli, Giulio

Publication type:

Article

Effect of laser scanning and milling speed on surface roughness of TC4 hybrid prepared.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1663, doi. 10.1007/s00170-021-07691-2

By:

Tao, Wang;
Jin, Zhang;
Shuai, Jia;
Fen, Yu

Publication type:

Article

Analysis of the wear behavior of multilayer coatings of TaZrN/TaZr produced by magnetron sputtering on AISI-316L stainless steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1565, doi. 10.1007/s00170-021-07655-6

By:

Navarro, Carolina Hernández;
Martínez, Martín Flores;
Carvajal, Edgar Enrique Camps;
Reséndiz, Laura Patricia Rivera;
Bustos, Ernesto David García

Publication type:

Article

AC breakdown analysis of synthesized nanofluids for oil-filled transformer insulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1395, doi. 10.1007/s00170-021-07631-0

By:

Oparanti, Samson Okikiola;
Khaleed, Abubakar Abubakar;
Abdelmalik, Abdelghaffar Amoka

Publication type:

Article

Optimization of machining parameters using response surface methodology with desirability function in turning duplex stainless steel UNS S32760.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1633, doi. 10.1007/s00170-021-07690-3

By:

Cardoso, Luiz G.;
Madeira, Deise S.;
Ricomini, Thulio E. P. A.;
Miranda, Rubén A.;
Brito, Tarcísio G.;
Paiva, Emerson J.

Publication type:

Article

Assessment of critical parameters on joint forming quality in laser shock hole-clinching based on finite element analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1843, doi. 10.1007/s00170-021-07710-2

By:

Zheng, Chao;
Pan, Changdong;
Zhao, Guoqun;
Li, Yan;
Ji, Zhong

Publication type:

Article

Tolerance analysis for robotic pick-and-place operations.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1405, doi. 10.1007/s00170-021-07672-5

By:

Tipary, Bence;
Erdős, Gábor

Publication type:

Article

Numerical simulation for electron beam selective melting PBF additive manufacturing of molybdenum.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1575, doi. 10.1007/s00170-021-07671-6

By:

Zafar, Muhammad Qasim;
Wu, Chaochao;
Zhao, Haiyan;
Kai, Du;
Gong, Qianming

Publication type:

Article

Designing heterogeneous microstructured superior strength-ductility magnesium by blend-press-sinter powder metallurgy process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1547, doi. 10.1007/s00170-021-07684-1

By:

Hassan, S. Fida

Publication type:

Article

Review on model predictive control: an engineering perspective.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1327, doi. 10.1007/s00170-021-07682-3

By:

Schwenzer, Max;
Ay, Muzaffer;
Bergs, Thomas;
Abel, Dirk

Publication type:

Article

A system framework of model quality analysis for product model in collaborative manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1351, doi. 10.1007/s00170-021-07622-1

By:

Yang, Wei;
Zhao, Qing;
Yan, Xiaoguang;
Chen, Zhuoning

Publication type:

Article

Transfer method of geometric tolerance items based on assembly joints.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1689, doi. 10.1007/s00170-021-07598-y

By:

Ma, Ning;
Yang, Bo;
Li, Jinping;
Liu, Yanchao;
Wang, Dianxi;
Gao, Changqing

Publication type:

Article

An alternative pressure-dependent velocity boundary condition for modeling self-reacting friction stir welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1601, doi. 10.1007/s00170-021-07589-z

By:

Zhao, Chenyu;
Liu, Xun

Publication type:

Article

An extended analysis on tuning the parameters of Adaptive Monte Carlo Localization ROS package in an automated guided vehicle.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 5/6, p. 1975, doi. 10.1007/s00170-021-07437-0

By:

Reis, Wallace Pereira Neves dos;
Silva, Guilherme José da;
Junior, Orides Morandin;
Vivaldini, Kelen Cristiane Teixeira

Publication type:

Article