Works matching IS 02683768 AND DT 2021 AND VI 117 AND IP 3/4

Results: 44

Investigation of the wear behavior of abrasive grits in a dry machining Inconel 718 narrow-deep-groove with a single-layer cubic boron nitride grinding wheel.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1061, doi. 10.1007/s00170-021-07823-8

By:

Li, Guang;
Liang, Guoxing;
Shen, Xingquan;
Lv, Ming;
Liu, Donggang;
Hao, Xinhui;
Huang, Yonggui;
Tochukwu, Ojiako Princewill;
Al-Nehari, Mohammed

Publication type:

Article

Experimental and numerical investigations on the deformation defects by gear rolling process with local induction heating.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 835, doi. 10.1007/s00170-021-07821-w

By:

Fu, Xiaobin;
Wang, Baoyu;
Wang, Tao

Publication type:

Article

Investigation of ultrasonic-assisted CNC cutting of honeycomb cores.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1275, doi. 10.1007/s00170-021-07820-x

By:

Mu, Dongfang;
Hu, Xiaoping;
Yu, Haofeng;
Yu, Baohua

Publication type:

Article

Dissimilar friction stir lap welding of AA2198 and AA7075 sheets: forces, microstructure and mechanical properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1045, doi. 10.1007/s00170-021-07816-7

By:

Astarita, Antonello;
Tucci, Fausto;
Silvestri, Alessia Teresa;
Perrella, Michele;
Boccarusso, Luca;
Carlone, Pierpaolo

Publication type:

Article

Cutting force modeling and experimental validation for micro end milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 933, doi. 10.1007/s00170-021-07815-8

By:

Wang, Weijie;
Zhang, Weiwei;
Huang, Dingchuan;
Wang, Wei

Publication type:

Article

Fabrication and characterization of friction stir–processed Mg-Zn-Ca biomaterials strengthened with MgO particles.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 919, doi. 10.1007/s00170-021-07814-9

By:

Liu, Zhen;
Cai, Yangchuan;
Chen, Jie;
Han, Jian;
Mao, Zhiyong;
Chen, Minfang

Publication type:

Article

Comprehensive performance evaluation method of CNC servo turrets based on accuracy retentivity theory.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1209, doi. 10.1007/s00170-021-07810-z

By:

Jin, Tongtong;
Yang, Zhaojun;
Yao, Ronglin;
Chen, Chuanhai;
Liu, Yepeng;
Hu, Wei;
Tian, Hailong

Publication type:

Article

A review on wire-arc additive manufacturing: typical defects, detection approaches, and multisensor data fusion-based model.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 707, doi. 10.1007/s00170-021-07807-8

By:

Chen, Xi;
Kong, Fanrong;
Fu, Youheng;
Zhao, Xushan;
Li, Runsheng;
Wang, Guilan;
Zhang, Haiou

Publication type:

Article

Manufacturing of micro components on amorphous alloy with a high-aspect-ratio characteristic structure by multistage forming method.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 905, doi. 10.1007/s00170-021-07805-w

By:

Cheng, Sirui;
Ma, Jiang;
Gong, Feng;
Shan, Debin;
Wang, Chunju;
Diao, Dongfeng;
Shen, Jun

Publication type:

Article

Effect of outlet pressure and polymer addition on accuracy of machining stainless steel by abrasive suspension jet.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 889, doi. 10.1007/s00170-021-07803-y

By:

Qiang, Chiheng;
Wang, Fengchao;
Guo, Chuwen

Publication type:

Article

Strain effect on microstructural properties of SUS 304L joint by PAW+GTAW.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1233, doi. 10.1007/s00170-021-07800-1

By:

Juan, Wang;
Yajiang, Li;
Qi, Wang;
Kun, Liu;
Hang, Li

Publication type:

Article

Study on the ultrasonic guided wave and online visual monitoring for ultrasonic precise bonding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 971, doi. 10.1007/s00170-021-07799-5

By:

Sun, Yibo;
Cao, Mengruo;
Zou, Li;
Yang, Xinhua

Publication type:

Article

Accurate prediction of the extrusion forming bonding reliability for heterogeneous welded sheets based on GA-BP neural network.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 765, doi. 10.1007/s00170-021-07797-7

By:

Gao, Lei;
Li, Feng;
Da Huo, Peng;
Li, Chao;
Xu, Jie

Publication type:

Article

A geometric prediction model of surface morphology in micro-EDM considering stochastic characteristics of discharge crater size.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1147, doi. 10.1007/s00170-021-07795-9

By:

Hou, Shaojie;
Bai, Jicheng

Publication type:

Article

Numerical investigation on the effects of circuit parameters on the plastic deformation of fastener holes in thin aluminum alloy via electromagnetic expansion process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 795, doi. 10.1007/s00170-021-07793-x

By:

Xu, Xiaofei;
Geng, Huihui;
Cao, Qingshan;
Cao, Quanliang;
Li, Liang;
Ouyang, Xiaoping

Publication type:

Article

Experiment investigation on machining characteristics of 7075 aluminium alloy with short electric arc milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 863, doi. 10.1007/s00170-021-07792-y

By:

Song, Dan;
Zhou, Jianping;
Wang, Kedian;
Li, Xuezhi;
Chen, Xiaokang;
Liu, Kai;
Wang, Shuaishuai;
Wang, Xiang

Publication type:

Article

A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 729, doi. 10.1007/s00170-021-07785-x

By:

Gupta, Munish Kumar;
Khan, Aqib Mashood;
Song, Qinghua;
Liu, Zhanqiang;
Khalid, Qazi Salman;
Jamil, Muhammad;
Kuntoğlu, Mustafa;
Usca, Üsame Ali;
Sarıkaya, Murat;
Pimenov, Danil Yu

Publication type:

Article

Development of structured light 3D-scanner with high spatial resolution and its applications for additive manufacturing quality assurance.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 845, doi. 10.1007/s00170-021-07780-2

By:

Wang, Rongxuan;
Law, Andrew C.;
Garcia, David;
Yang, Shuo;
Kong, Zhenyu

Publication type:

Article

Investigation on the stiffness of wire web of multi-wire sawing machine and its influence on machining accuracy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 985, doi. 10.1007/s00170-021-07788-8

By:

Qiu, Jian;
Zhang, Shanbao;
Fu, Rilai;
Zhu, He;
Yang, Guodong;
Zou, Yingkui;
Ge, Renpeng

Publication type:

Article

Data-driven sustainability evaluation of machining system: a case study.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 775, doi. 10.1007/s00170-021-07779-9

By:

Zhang, Cuixia;
Wang, Cui;
Liu, Conghu;
Zhu, Guang;
Li, Wenyi;
Gao, Mengdi

Publication type:

Article

A generalized analysis of energy saving strategies through experiment for CNC milling machine tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 751, doi. 10.1007/s00170-021-07787-9

By:

Feng, Chunhua;
Chen, Xiang;
Zhang, Jingyang;
Huang, Yugui

Publication type:

Article

Assessment of researches and case studies on Cloud Manufacturing: a bibliometric analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 691, doi. 10.1007/s00170-021-07782-0

By:

Morelli, Daniel Alexandre;
Ignacio, Paulo Sergio de Arruda

Publication type:

Article

Analysis on the interference assembly of camshaft with knurled tube and cam.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 961, doi. 10.1007/s00170-021-07783-z

By:

Huang, Xiaoming;
Sun, Weitao;
Liu, Xiaoliang;
Wang, Yucan;
Xing, Jin;
Bi, Hailin;
Wang, Yuqian;
You, Wentao

Publication type:

Article

A multi-dwell temperature profile design for the cure of thick CFRP composite laminates.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1133, doi. 10.1007/s00170-021-07765-1

By:

Zhang, Wenchang;
Xu, Yingjie;
Hui, Xinyu;
Zhang, Weihong

Publication type:

Article

Tool path generation with global interference avoidance for the robotic polishing of blisks.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1223, doi. 10.1007/s00170-021-07698-9

By:

Wang, Yuanming;
Yang, Jixiang;
Li, Dingwei;
Ding, Han

Publication type:

Article

Evaluation on the formability of the third-generation automotive medium-Mn steel based on experiment and simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1015, doi. 10.1007/s00170-021-07652-9

By:

Chang, Ying;
Zheng, Guojun;
Li, Xiaodong;
Jin, Chunning;
Wang, Cunyu;
Dong, Han

Publication type:

Article

Experimental and numerical investigation of forming defects and stress analysis in laser-welded blanks during deep drawing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1193, doi. 10.1007/s00170-021-07767-z

By:

Aminzadeh, Ahmad;
Sattarpanah Karganroudi, Sasan;
Barka, Noureddine

Publication type:

Article

Evaluating the hole quality produced by vibratory drilling: additive manufactured PLA+.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 785, doi. 10.1007/s00170-021-07750-8

By:

Baraheni, Mohammad;
Shabgard, Mohammad Reza;
Amini, Saeid

Publication type:

Article

Dynamics modeling and stability improvement in the machining of thin-walled workpiece with force-tunable pneumatic fixture.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1029, doi. 10.1007/s00170-021-07686-z

By:

Jia, Jinjie;
Niu, Jinbo;
Sun, Yuwen

Publication type:

Article

Machinability study and ANN-MOALO-based multi-response optimization during Eco-Friendly machining of EN-GJL-250 cast iron.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1179, doi. 10.1007/s00170-021-07759-z

By:

Laouissi, Aissa;
Nouioua, Mourad;
Yallese, Mohamed Athmane;
Abderazek, Hammoudi;
Maouche, Hichem;
Bouhalais, Mohamed Lamine

Publication type:

Article

Force prediction model of high efficiency U pass milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1101, doi. 10.1007/s00170-021-07707-x

By:

Feng, Jingyang;
Wei, Zhaocheng;
Wang, Minjie;
Guo, Minglong;
Wang, Xueqin

Publication type:

Article

Microcosmic mechanism of die-sinking mixed-gas atomization discharge ablation process on titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 949, doi. 10.1007/s00170-021-07736-6

By:

Kong, Linglei;
Wang, Xiangzhi;
He, Qing;
Han, Jinjin;
Suorong, Zhang;
Kai, Ding;
Liu, Zhidong

Publication type:

Article

Reliability evaluation method for squeeze casting process parameter data.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1303, doi. 10.1007/s00170-021-07735-7

By:

Deng, Jianxin;
Ye, Zhixing;
Tang, Rui;
You, Dongdong;
Xie, Bin

Publication type:

Article

Mechanical properties of tubular rivet-reinforced joints realized with different reinforcing loads.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 877, doi. 10.1007/s00170-021-07734-8

By:

Ren, Xiaoqiang;
Chen, Chao;
Qin, Denglin;
Wu, Jinliang;
Ouyang, Yawen

Publication type:

Article

Research on a multidimensional strain energy estimation method for welding spots based on performance optimization.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1263, doi. 10.1007/s00170-021-07724-w

By:

Song, Haisheng;
Yang, Changhai;
Yang, Na;
Li, Kunheng;
Chen, Zhiyong

Publication type:

Article

Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1117, doi. 10.1007/s00170-021-07708-w

By:

Zhao, Jinfu;
Liu, Zhanqiang;
Wang, Bing;
Song, Qinghua

Publication type:

Article

Surrogate model–based inverse parameter estimation in deep drawing using automatic knowledge acquisition.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 997, doi. 10.1007/s00170-021-07642-x

By:

Ryser, Matthias;
Neuhauser, Felix M.;
Hein, Christoph;
Hora, Pavel;
Bambach, Markus

Publication type:

Article

Additive manufacturing of AISI 420 stainless steel: process validation, defect analysis and mechanical characterization in different process and post-process conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 809, doi. 10.1007/s00170-021-07639-6

By:

Liverani, Erica;
Fortunato, Alessandro

Publication type:

Article

Sinterability properties of a ceramic synthesized from Algerian kaolin and spent magnesia-carbon refractory bricks.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 823, doi. 10.1007/s00170-021-07637-8

By:

Mebrek, Alima

Publication type:

Article

Effect of direct energy deposition parameters on morphology, residual stresses, density, and microstructure of 1.2709 maraging steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1287, doi. 10.1007/s00170-021-07635-w

By:

Aleksandr, Kulish;
Ferdinando, Salvatore;
Joel, Rech;
Joel, Courbon;
Jordan, Munoz;
Thomas, Joffre

Publication type:

Article

Study of dieless radial spinning for thick-walled cylindrical parts with external grooves.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1163, doi. 10.1007/s00170-021-07633-y

By:

Liu, Famei;
Jin, Junsong;
Rao, Wei;
Wang, Ying;
Gao, Chang;
Tang, Xuefeng;
Wang, Xinyun

Publication type:

Article

Temperature uniformity of profiled grinding wheel under high-frequency induction brazing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1091, doi. 10.1007/s00170-021-07608-z

By:

Qilin, Li;
Kai, Ding;
Weining, Lei;
Linglei, Kong;
Jiajia, Chen;
Daping, Shan;
Xichao, Wang

Publication type:

Article

Performance improvement of high-speed EDM and ECM combined process by using a helical tube electrode with matched internal and external flushing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1243, doi. 10.1007/s00170-021-07595-1

By:

Ji, Lei;
Zhang, Yan;
Wang, Guoqian;
Zhang, Jie;
Yang, Wentao

Publication type:

Article

Nonlinear vibratory properties of additive manufactured continuous carbon fiber reinforced polymer composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 3/4, p. 1077, doi. 10.1007/s00170-021-07456-x

By:

Zhao, Jing;
Perkins, Edmon;
Li, XiaoFu;
Bond, Arthur;
Marghitu, Dan

Publication type:

Article