Works matching IS 02683768 AND DT 2021 AND VI 116 AND IP 7/8

Results: 44

Position prediction and error compensation for a large thin-walled box-shaped workpiece in a fixture.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2633, doi. 10.1007/s00170-021-07632-z

By:

Peng, Dingqiang;
Wang, Liming;
Mechefske, Chris K.;
Shao, Yimin

Publication type:

Article

A general method for instantaneous undeformed chip thickness calculation in five-axis milling based on Boolean operations.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2325, doi. 10.1007/s00170-021-07576-4

By:

Li, Guochao;
Liu, Yunlong;
Zhao, Donghao;
Dai, Lei;
Zhou, Honggen;
Jing, Xuwen

Publication type:

Article

Research on cutting performance in high-speed milling of TC11 titanium alloy using self-propelled rotary milling cutters.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2125, doi. 10.1007/s00170-021-07592-4

By:

Yujiang, Lu;
Tao, Chen

Publication type:

Article

Numerical simulation and experimental research on rubber flexible-die forming limitation with new position-limited backpressure mechanism.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2183, doi. 10.1007/s00170-021-07583-5

By:

Han, Zhiren;
Wei, Chuang;
Du, Simin;
Jia, Zhen;
Du, Xinyang

Publication type:

Article

Study on the amplitude effect on micro-hole drilling of AISI 4340 by ultrasonic vibration.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2437, doi. 10.1007/s00170-021-07617-y

By:

Chen, Guangjun;
Xu, Jinkai;
Lian, Zhongxu;
Wang, Jiaqi;
Li, Ying;
Wang, Jingdong;
Yu, Huadong

Publication type:

Article

Machine vision-based intelligent manufacturing using a novel dual-template matching: a case study for lithium battery positioning.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2531, doi. 10.1007/s00170-021-07649-4

By:

Guo, Xiaoqiang;
Liu, Xinhua;
Gupta, Munish Kumar;
Hou, Shuwen;
Królczyk, Grzegorz;
Li, Zhixiong

Publication type:

Article

Study of cracking susceptibility in similar and dissimilar welds between carbon steel and austenitic stainless steel through finger test and FE numerical model.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2661, doi. 10.1007/s00170-021-07596-0

By:

Alcantar-Modragón, Nereyda;
García-García, Víctor;
Reyes-Calderón, Francisco;
Villalobos-Brito, Julio César;
Vergara-Hernández, Héctor Javier

Publication type:

Article

Comparison of EDM and laser trepanation micro-drilling processes using multiple-criteria decision analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2599, doi. 10.1007/s00170-021-07630-1

By:

Biscaia, Ricardo Vinícius Bubna;
Dzulinski, Ana Caroline;
de Melo, Everton Luiz;
Braghini Junior, Aldo

Publication type:

Article

Effects of tool wear on machined surface integrity during milling of Inconel 718.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2497, doi. 10.1007/s00170-021-07626-x

By:

Tan, Liang;
Yao, Changfeng;
Zhang, Dinghua;
Cui, Minchao;
Shen, Xuehong

Publication type:

Article

Surface integrity analysis of surfaces of nickel-based alloys machined with distilled water and aluminium powder-mixed dielectric fluid after WEDM.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2467, doi. 10.1007/s00170-021-07610-5

By:

Rohilla, Vinod Kumar;
Goyal, Rachin;
Kumar, Amresh;
Singla, Yogesh Kumar;
Sharma, Neeraj

Publication type:

Article

The mechanism of crack generation and propagation in the new casting alloy GH4151 during cogging.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2455, doi. 10.1007/s00170-021-07609-y

By:

Jia, Zhi;
Wei, Baolin;
Jia, Chonglin;
Ding, Yutian;
Yang, Yan;
Ling, Dekui;
Chen, Hanfeng

Publication type:

Article

Machining performance of PCD drill in low-frequency vibration-assisted drilling of CFRP/Ti6Al4V stack: with special emphasis on the plowing behavior.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2269, doi. 10.1007/s00170-021-07603-4

By:

Yan, Chaoren;
Chen, Yan;
Yang, Haojun;
Qian, Ning;
Chen, Yijia;
Guo, Nan

Publication type:

Article

Co–Cr–Mo alloy fabricated by laser powder bed fusion process: grain structure, defect formation, and mechanical properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2387, doi. 10.1007/s00170-021-07570-w

By:

da Silva Costa, Alex Matos;
Oliveira, João Pedro;
Munhoz, André Luiz Jardini;
Leite, Eduardo Guimarães Barbosa;
de Freitas, Denise Souza;
de Jesus Monteiro, Maurício;
Rodriguez, Johnnatan

Publication type:

Article

Effect of ultrasonic impact time on microstructure and properties of 7A52 aluminum alloy tandem MIG welded joint.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2687, doi. 10.1007/s00170-021-07599-x

By:

Chen, Furong;
Yang, Yihang;
Li, Nan

Publication type:

Article

Rotary friction welded C45 to 16NiCr6 steel rods: statistical optimization coupled to mechanical and microstructure approaches.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2285, doi. 10.1007/s00170-021-07597-z

By:

Belkahla, Youcef;
Mazouzi, Azzeddine;
Lebouachera, Seif El Islam;
Hassan, Ammar Jabbar;
Fides, Martin;
Hvizdoš, Pavol;
Cheniti, Billel;
Miroud, Djamel

Publication type:

Article

Performance evaluation of SiC powder mixed electrical discharge machining: a case of wire cut mode with re-circulating molybdenum wire.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2197, doi. 10.1007/s00170-021-07562-w

By:

Saleem, Muhammad Qaiser;
Naqvi, Maham;
Khan, Sarmad Ali;
Mufti, Nadeem Ahmad;
Ishfaq, Kashif

Publication type:

Article

Identification of the speed-varying dynamic behaviors of tool center point based on semi-theoretical methodology.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2553, doi. 10.1007/s00170-021-07580-8

By:

Hu, Teng;
Ma, Weizhen;
Wang, Xiaohu;
Zheng, Hualin;
Mi, Liang

Publication type:

Article

The mechanics of sawing granite with diamond wire.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2591, doi. 10.1007/s00170-021-07577-3

By:

Konstanty, Janusz Stefan

Publication type:

Article

Cutting edge microgeometries in metal cutting: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2045, doi. 10.1007/s00170-021-07558-6

By:

Zhuang, Kejia;
Fu, Changni;
Weng, Jian;
Hu, Cheng

Publication type:

Article

Workpiece vibration in feed direction assisted electrochemical cutting using tube electrode with inclined holes.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2651, doi. 10.1007/s00170-021-07556-8

By:

Yang, Tao;
Fang, Xiaolong;
Hang, Yusen;
Xu, Zhengyang;
Zeng, Yongbin

Publication type:

Article

Multi-objective optimization of support structures for metal additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2613, doi. 10.1007/s00170-021-07555-9

By:

Ameen, Wadea;
Al-Ahmari, Abdulrahman;
Mohammed, Muneer Khan;
Kaid, Husam

Publication type:

Article

Experimental study on turning performance of a novel nanofluid prepared by composites of MWCNTs.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2373, doi. 10.1007/s00170-021-07554-w

By:

Guan, Jiju;
Ding, Yunpeng;
Gao, Chao;
Xu, Zhengya;
Xu, Xuefeng;
Wang, Zhiliang

Publication type:

Article

Numerical investigation of the effect of material properties on forming metal bellows.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2425, doi. 10.1007/s00170-021-07551-z

By:

Liu, Jing;
Liu, Yang;
Li, Lanyun;
Liu, Jian

Publication type:

Article

Tracking the maturity of industry 4.0: the perspective of a real scenario.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2161, doi. 10.1007/s00170-021-07550-0

By:

Alcácer, Vítor;
Rodrigues, Carolina;
Carvalho, Helena;
Cruz-Machado, Virgilio

Publication type:

Article

Thermo-mechanical forging of 708M40 steel ring samples: experiments and modelling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2577, doi. 10.1007/s00170-021-07546-w

By:

Hill, Steven;
P.Turner, Richard

Publication type:

Article

A comparative analysis of hot and cold flashless forging of a stepped shaft using vertically-parted dies.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2521, doi. 10.1007/s00170-021-07542-0

By:

Bulzak, Tomasz;
Tomczak, Janusz;
Pater, Zbigniew

Publication type:

Article

Concurrent improvement of surface roughness and residual stress of as-built and aged additively manufactured maraging steel post-processed by milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2309, doi. 10.1007/s00170-021-07527-z

By:

de Oliveira, Amanda Rossi;
Del Conte, Erik Gustavo

Publication type:

Article

The wettability of metal-based composite foils with hierarchical structure prepared by ultrasonic-assisted composite electrodeposition.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2359, doi. 10.1007/s00170-021-07526-0

By:

Wu, Chunxia;
Zhao, Hang;
Wu, Xiaoyu;
Xu, Bin;
Lei, Jianguo;
Zhu, Likuan;
Gao, Chang;
Xiao, Yongchang

Publication type:

Article

Optimization of the coupled cooling circuit in electromagnetic forming with finite element analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2211, doi. 10.1007/s00170-021-07525-1

By:

Huang, Lantao;
Ding, Zinan;
Zeng, Jin;
Zhou, Yihan;
Sun, Quqin

Publication type:

Article

An intelligent control approach for defect-free friction stir welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2299, doi. 10.1007/s00170-021-07523-3

By:

Cobos, Richard;
Salas, Santiago D.;
Angulo, Wilfredo;
Liao, T. Warren

Publication type:

Article

A review on laser transmission welding of thermoplastics.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2093, doi. 10.1007/s00170-021-07519-z

By:

Wu, Jing;
Lu, Song;
Wang, Hong-Jian;
Wang, Yan;
Xia, Feng-Bin;
Jin-Wang

Publication type:

Article

An integrated approach for the modelling of silicon carbide components laser milling process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2335, doi. 10.1007/s00170-021-07516-2

By:

Leone, Claudio;
Genna, Silvio;
Tagliaferri, Vincenzo

Publication type:

Article

A novel severe plastic deformation method for manufacturing Al/Mg bimetallic tube.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2569, doi. 10.1007/s00170-021-07513-5

By:

Tian, Ye;
Hu, Hongjun;
Zhang, Dingfei

Publication type:

Article

Production control of unreliable manufacturing systems with perishable inventory.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2473, doi. 10.1007/s00170-021-07503-7

By:

Polotski, Vladmir;
Gharbi, Ali;
Kenne, Jean-Pierre

Publication type:

Article

Sensor-based leakage detection in vacuum bagging.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2413, doi. 10.1007/s00170-021-07505-5

By:

Haschenburger, Anja;
Menke, Niklas;
Stüve, Jan

Publication type:

Article

Towards optimization of thickness, hardness, and porosity of low-pressure cold sprayed WC-Ni coatings.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2149, doi. 10.1007/s00170-021-07500-w

By:

Jibran, Wania;
Hogan, James;
McDonald, André

Publication type:

Article

Effect of tool traverse speed on fabrication of open-cell copper foam using friction processing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2137, doi. 10.1007/s00170-021-07498-1

By:

Sharma, Vyas Mani;
Pal, Surjya Kanta;
Racherla, Vikranth

Publication type:

Article

Rapid prediction of thrust force coupling scale-span model and revised ANN in drilling CFRPs.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2255, doi. 10.1007/s00170-021-07491-8

By:

Liu, Yong;
Li, Qiannan;
Qi, Zhenchao;
Chen, Wenliang

Publication type:

Article

Laser scanning–based straightness measurement of precision bright steel rods at one point.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2511, doi. 10.1007/s00170-021-07468-7

By:

Schmid-Schirling, Tobias;
Kraft, Lea;
Carl, Daniel

Publication type:

Article

Research on gradient additive remanufacturing of ultra-large hot forging die based on automatic wire arc additive manufacturing technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2243, doi. 10.1007/s00170-021-07424-5

By:

Hong, Xiaoying;
Xiao, Guiqian;
Zhang, Yancheng;
Zhou, Jie

Publication type:

Article

Research on cellular morphology and mechanical properties of microcellular injection–molded BCPP and its blends.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2223, doi. 10.1007/s00170-021-07389-5

By:

Wang, Jiachang;
Wang, Guilong;
Zhao, Jinchuan;
Zhang, Aimin;
Dong, Guiwei;
Wang, Xiebin;
Zhao, Guoqun;
Park, Chul B.

Publication type:

Article

Tool wear condition monitoring by combining spindle motor current signal analysis and machined surface image processing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2697, doi. 10.1007/s00170-021-07366-y

By:

Yuan, Jun;
Liu, Libing;
Yang, Zeqing;
Bo, Jingdong;
Zhang, Yanrui

Publication type:

Article

An improved numerical integration method to predict the milling stability based on the Lagrange interpolation scheme.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2111, doi. 10.1007/s00170-021-07311-z

By:

Xia, Yan;
Wan, Yi;
Luo, Xichun;
Liu, Zhanqiang;
Song, Qinghua

Publication type:

Article

Conventional and swing friction stir spot welding of aluminum alloy to magnesium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2401, doi. 10.1007/s00170-020-06548-4

By:

Wu, Siyu;
Sun, Tao;
Shen, Yifu;
Yan, Yinfei;
Ni, Ruiyang;
Liu, Wenming

Publication type:

Article