Works matching IS 02683768 AND DT 2021 AND VI 116 AND IP 5/6

Results: 45

Experimental investigation of multi-wall carbon nanotube added epoxy resin on the EDM performance of epoxy/carbon fiber/MWCNT hybrid composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1801, doi. 10.1007/s00170-021-07593-3

By:

Yazdanfar, Ali;
Shahrajabian, Hamzeh

Publication type:

Article

Experimental study on the reduction of process-induced deformation when milling a low stiffness structure made of Ti6Al4V titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1975, doi. 10.1007/s00170-021-07586-2

By:

Liu, Qimeng;
Xu, Jinkai;
Yu, Huadong

Publication type:

Article

A novel protection-type porthole die for manufacturing multi-cavity and thin-walled extrusion profile: numerical simulation, optimization design, and experimental validation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1691, doi. 10.1007/s00170-021-07582-6

By:

Wang, Xi;
Sun, Kaibo;
Liu, Zhiwen;
Li, Luoxing;
Li, Shikang;
Li, Fazhi

Publication type:

Article

Diamond micro-scraping for the fabrication of polygonal Fresnel lens structure array on roller molds.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1951, doi. 10.1007/s00170-021-07581-7

By:

Meng, Songtao;
Yin, Ziqiang;
Xia, Senbin;
Yao, Jianhua;
Zhang, Jianwen

Publication type:

Article

A novel polishing technology for leading and trailing edges of aero-engine blade.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1871, doi. 10.1007/s00170-021-07574-6

By:

Zhu, Zheng-Qing;
Chen, Zhi-Tong;
Zhang, Yun

Publication type:

Article

Investigation of surface quality in Cost of Goods Manufactured (COGM) method of μ-Al<sub>2</sub>O<sub>3</sub> Powder-Mixed-EDM process on machining of Ti-6Al-4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1783, doi. 10.1007/s00170-021-07573-7

By:

Taherkhani, Abolfazl;
Ilani, Mohsen Asghari;
Ebrahimi, Faramarz;
Huu, Phan Nguyen;
Long, Banh Tien;
Van Dong, Pham;
Tam, Nguyen Chi;
Minh, Nguyen Duc;
Van Duc, Nguyen

Publication type:

Article

Investigating the pulse short electric arc milling of Ti6Al4V alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1675, doi. 10.1007/s00170-021-07572-8

By:

Zhang, Li;
Hu, Guoyu;
Zhou, Jianping;
Zhou, Zongjie;
Liu, Kai;
Zhang, Shengsheng

Publication type:

Article

Mechanical performance and microstructure of near-unthinned die-less spinning using ball-crown-shape roller.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1667, doi. 10.1007/s00170-021-07571-9

By:

Jia, Zhen;
Bao, Huili;
Gong, Xue;
Han, Zhiren;
Zhou, Shuyang;
Ji, Shude

Publication type:

Article

Study of surfactant effects on intermolecular forces (IMF) in powder-mixed electrical discharge machining (EDM) of Ti-6Al-4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1763, doi. 10.1007/s00170-021-07569-3

By:

Ilani, Mohsen Asghari;
Khoshnevisan, Mohammad

Publication type:

Article

Microstructural and mechanical property investigation of machined surface layer in high-speed milling of Ti-6Al-4V alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1707, doi. 10.1007/s00170-021-07568-4

By:

Ullah, Irfan;
Zhang, Song;
Zhang, Qing;
Li, BinXun

Publication type:

Article

A characterization of laser cleaning painting layer from steel surface based on thermodynamic model.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1989, doi. 10.1007/s00170-021-07566-6

By:

Lu, Yao;
Ding, Ye;
Wang, MaoLu;
Yang, LiJun;
Wang, Yang

Publication type:

Article

The effect of superimposed ultrasonic vibration on tensile behavior of 6061-T6 aluminum alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1843, doi. 10.1007/s00170-021-07564-8

By:

Wu, Bangfu;
Cao, Yang;
Zhao, Junshuai;
Ding, Wenfeng

Publication type:

Article

Investigation on machinability of NiTi shape memory alloys under different cooling conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1913, doi. 10.1007/s00170-021-07563-9

By:

Zhao, Yanzhe;
Guo, Kai;
Li, Jianfeng;
Sun, Jie

Publication type:

Article

Electrochemical surface smoothing of spark erosion treated Zr-based bulk metallic glasses in NaCl-ethylene glycol electrolyte.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1591, doi. 10.1007/s00170-021-07561-x

By:

Guo, Cheng;
Wu, Bo;
Xu, Bin;
Liang, Xiong;
Shen, Jun;
Wu, Xiaoyu

Publication type:

Article

Thermal error prediction of ball screws based on PSO-LSTM.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1721, doi. 10.1007/s00170-021-07560-y

By:

Gao, Xiangsheng;
Guo, Yueyang;
Hanson, Dzonu Ambrose;
Liu, Zhihao;
Wang, Min;
Zan, Tao

Publication type:

Article

Overview on development of acoustic emission monitoring technology in sawing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1411, doi. 10.1007/s00170-021-07559-5

By:

Zhuo, Rongjin;
Deng, Zhaohui;
Chen, Bing;
Liu, Guoyue;
Bi, Shenghao

Publication type:

Article

Investigating governing parameters influencing solidification process in pulsed laser micro-welding of AISI 316L thin foils using finite element method.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1819, doi. 10.1007/s00170-021-07553-x

By:

Sheikhbahaee, Hamed;
Pakmanesh, Mohammad Reza;
Mirahmadi, S. Javid;
Asghari, Saeed

Publication type:

Article

Characterization, machinability studies, and multi-response optimization of AA 6082 hybrid metal matrix composite.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1555, doi. 10.1007/s00170-021-07549-7

By:

Ononiwu, Ndudim H.;
Ozoegwu, Chigbogu G.;
Madushele, Nkosinathi;
Akinlabi, Esther T.

Publication type:

Article

Investigation of material characteristics of intersections built by wire and arc additive manufacturing using locally varying deposition parameters.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 2021, doi. 10.1007/s00170-021-07548-8

By:

Gudeljevic, Manuela;
Klein, Thomas

Publication type:

Article

Voxel-based modeling of transient material removal in machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1575, doi. 10.1007/s00170-021-07545-x

By:

Miers, John C.;
Tucker, Tommy;
Kurfess, Thomas;
Saldana, Christopher

Publication type:

Article

Friction drilling: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1391, doi. 10.1007/s00170-021-07544-y

By:

Eliseev, Alexander;
Kolubaev, Evgeny

Publication type:

Article

Decision-making in a fast fashion company in the Industry 4.0 era: a Digital Twin proposal to support operational planning.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1653, doi. 10.1007/s00170-021-07543-z

By:

dos Santos, Carlos Henrique;
Gabriel, Gustavo Teodoro;
do Amaral, João Victor Soares;
Montevechi, José Arnaldo Barra;
de Queiroz, José Antônio

Publication type:

Article

Vortex formation mechanism and experimental research of abrasive flow precision machining special inner curved surface based on large eddy simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1633, doi. 10.1007/s00170-021-07537-x

By:

Li, Junye;
Zhu, Jinbao;
Zhang, Hengfu;
Peng, Qifei;
Li, Xueguang;
Zhang, Dongmei;
Zhao, Weihong

Publication type:

Article

Operational vibration of a waterjet focuser as means for monitoring its wear progression.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1937, doi. 10.1007/s00170-021-07534-0

By:

Copertaro, Edoardo;
Perotti, Francesco;
Annoni, Massimiliano

Publication type:

Article

Finite element analysis of material flow in flat-rivet clinching process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1961, doi. 10.1007/s00170-021-07532-2

By:

Chen, Chao;
Ouyang, Yawen;
Qin, Denglin

Publication type:

Article

Investigation on the electrochemical assisted magnetic abrasive finishing for a stainless steel of SUS304.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1509, doi. 10.1007/s00170-021-07529-x

By:

Sun, Xu;
Fu, Yongjian;
Lu, Wei;
Hang, Wei

Publication type:

Article

Residual stress investigation of quenched and artificially aged aluminum alloy 7175.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1537, doi. 10.1007/s00170-021-07520-6

By:

Ba, Kadiata;
Levesque, Julie;
Gakwaya, Augustin;
Karganroudi, Sasan Sattarpanah

Publication type:

Article

Influence of isothermal aging in LDX 2101 duplex stainless steel on the microstructure and local properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1881, doi. 10.1007/s00170-021-07515-3

By:

Ouali, Naima;
Cheniti, Billel;
Belkessa, Brahim;
Maamache, Bouzid;
Kouba, Ramdhane;
Hakem, Maamar

Publication type:

Article

Real-time chatter detection via iterative Vold-Kalman filter and energy entropy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 2003, doi. 10.1007/s00170-021-07509-1

By:

Dong, Xingjian;
Tu, Guowei;
Wang, Xiaoshan;
Chen, Shiqian

Publication type:

Article

Correction to: Optimization of CVC shifting mode for hot strip mill based on the proposed LightGBM prediction model of roll shifting.

Published in:

2021

By:

Li, Guangtao;
Gong, Dianyao;
Xing, Junfang;
Zhang, Dianhua

Publication type:

Correction Notice

On the manufacture of naval propellers by using self-hardening sand molds made by robotic arms.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1751, doi. 10.1007/s00170-021-07492-7

By:

Cruz, Celso E.;
Vargas-Arista, B.;
Gámez-Cuatzin, Hugo;
Camacho, Diego;
Canto, Alfredo;
Villareal-Colin, Ricardo;
Castillo-Garcia, Andres;
Valdez-Aguayo, Antonio;
Rice-Ramirez, José Luis;
Guzmán, Isidro

Publication type:

Article

Electrochemical machining of array flow channels using cathode tool with comb-shaped insulator.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 2031, doi. 10.1007/s00170-021-07484-7

By:

Liu, Jia;
Liu, Yan;
Jiang, Xiaochen;
Zhu, Di

Publication type:

Article

Remanufacturing of recycled carbon fiber-reinforced composites based on fused deposition modeling processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1609, doi. 10.1007/s00170-021-07473-w

By:

Cheng, Huanbo;
Guo, Lijun;
Qian, Zhengchun;
Sun, Rui;
Zhang, Jie

Publication type:

Article

New drawbead tester and numerical analysis of drawbead closure force.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1855, doi. 10.1007/s00170-021-07472-x

By:

Gil, Imanol;
Mendiguren, Joseba;
Galdos, Lander;
Mugarra, Endika;
Saenz de Argandoña, Eneko

Publication type:

Article

Influence of residual stress due to the equatorial weld on the ultimate strength of a Ti80 spherical pressure shell.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1831, doi. 10.1007/s00170-021-07467-8

By:

Li, Liangbi;
Bao, Huaning;
Wan, Zhengquan;
Li, Yanqing;
Sun, Kaixiang;
Luo, Guangen

Publication type:

Article

Effect of yield criterion and variable elastic modulus on springback prediction of Ti-6Al-4V sheet V-shaped bending.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1925, doi. 10.1007/s00170-021-07452-1

By:

Liu, Zijian;
Ma, Lidong;
Meng, Zhijuan;
Liu, Peiyu;
Du, Yukang

Publication type:

Article

Using 3D printing and femtosecond laser micromachining to fabricate biodegradable peripheral vascular stents with high structural uniformity and dimensional precision.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1523, doi. 10.1007/s00170-021-07446-z

By:

Chang, Fuh-Yu;
Liang, Te-Hsien;
Wu, Tsung-Jung;
Wu, Chien-Hsing

Publication type:

Article

Robot welding seam online grinding system based on laser vision guidance.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1737, doi. 10.1007/s00170-021-07433-4

By:

Ge, Jimin;
Deng, Zhaohui;
Li, Zhongyang;
Li, Wei;
Lv, Lishu;
Liu, Tao

Publication type:

Article

Autonomous 3D geometry reconstruction through robot-manipulated optical sensors.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1895, doi. 10.1007/s00170-021-07432-5

By:

Mineo, Carmelo;
Cerniglia, Donatella;
Ricotta, Vito;
Reitinger, Bernhard

Publication type:

Article

Optimization of CVC shifting mode for hot strip mill based on the proposed LightGBM prediction model of roll shifting.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1491, doi. 10.1007/s00170-021-07395-7

By:

Li, Guangtao;
Gong, Dianyao;
Xing, Junfang;
Zhang, Dianhua

Publication type:

Article

Deformation analysis and processing parameter optimization of roller clinching.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1621, doi. 10.1007/s00170-021-07215-y

By:

Pan, Youcheng;
Wen, Tong;
Zhou, Yin;
You, Jianhao;
Tang, Haoxing;
Chen, Xia

Publication type:

Article

Effect of magnetic field on tension–tension side of forming limit diagram in sheet metal forming using a magnetorheological fluid.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1451, doi. 10.1007/s00170-021-07098-z

By:

Wang, Peng-yi;
Wang, Zhong-jin;
Xiang, Nan

Publication type:

Article

A path planning method of lattice structural components for additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1467, doi. 10.1007/s00170-021-07092-5

By:

Zhou, Bo;
Tian, Tongtong

Publication type:

Article

Multi-object optimization of EDM by Taguchi-DEAR method using AlCrNi coated electrode.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1429, doi. 10.1007/s00170-021-07032-3

By:

Phan, Nguyen Huu;
Van Dong, Pham;
Dung, Hoang Tien;
Van Thien, Nguyen;
Muthuramalingam, T.;
Shirguppikar, Shailesh;
Tam, Nguyen Chi;
Ly, Nguyen Trong

Publication type:

Article

A new burr formation model for drilling with tool wear.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 5/6, p. 1437, doi. 10.1007/s00170-021-07031-4

By:

Mandra, Anna M.;
Jiang, Jiefeng;
Xi, Fengfeng

Publication type:

Article