Works matching IS 02683768 AND DT 2021 AND VI 116 AND IP 11/12

Results: 44

Study of explosive welding of A6061/SUS821L1 using interlayers with different thicknesses and the air shockwave between plates.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3779, doi. 10.1007/s00170-021-07755-3

By:

Chen, Xiang;
Li, Xiaojie;
Inao, Daisuke;
Tanaka, Shigeru;
Hokamoto, Kazuyuki

Publication type:

Article

Numerical analysis of the Ti6Al4V behavior based on the definition of a new phenomenological model.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3933, doi. 10.1007/s00170-021-07753-5

By:

Yaich, Mariem;
Ayed, Yessine;
Germain, Guénaël;
Bouaziz, Zoubeir

Publication type:

Article

Study on the micro-EDM processing characteristics of Ti-6Al-4V alloy with different electrode materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3369, doi. 10.1007/s00170-021-07664-5

By:

Chen, Sheng-gui;
Lian, Man-qun;
Wu, Xiao-yu;
Lei, Jian-guo;
Zhao, Hang;
Peng, Tai-jiang;
Luo, Feng;
Yang, Jun;
Xu, Bin

Publication type:

Article

Friction stir welding of Al-SiC composite sheets: a numerical simulation of residual stresses.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3717, doi. 10.1007/s00170-021-07751-7

By:

Zamani, Seyed Mohammad Mahdi;
Behdinan, Kamran;
Mohammadpour, Abolghasem;
Razfar, Mohammad Reza;
Mohandesi, Jamshid Aghazadeh

Publication type:

Article

Multi-response optimization using artificial neural network-based GWO algorithm for high machining performance with minimum quantity lubrication.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3765, doi. 10.1007/s00170-021-07745-5

By:

Nouioua, Mourad;
Laouissi, Aissa;
Yallese, Mohamed Athmane;
Khettabi, Riad;
Belhadi, Salim

Publication type:

Article

Wear resistance of direct-energy–deposited AISI M2 tool steel with and without post-heat treatment.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3917, doi. 10.1007/s00170-021-07741-9

By:

Park, Young Keun;
Ha, Kyeongsik;
Shin, Kwang Yong;
Lee, Ki Yong;
Kim, Dong Joo;
Kwon, Se-Hun;
Lee, Wookjin

Publication type:

Article

Performance of lightweight interlocking pavement concrete block composite made from breadfruit shell ash particle and Momordica angustisepala fiber via modified casting method.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 4007, doi. 10.1007/s00170-021-07727-7

By:

Ugochukwu, Nwoji Clifford;
Eguakhide, Atikpo;
Sunday, Aigbodion Victor;
Chinonso, Obetta Emmanuel

Publication type:

Article

Effect of the ball burnishing on the surface quality and mechanical properties of a TRIP steel sheet.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3953, doi. 10.1007/s00170-021-07715-x

By:

Capilla-González, Gustavo;
Martínez-Ramírez, Israel;
Díaz-Infante, David;
Hernández-Rodríguez, Eric;
Alcántar-Camarena, Víctor;
Saldaña-Robles, Alberto

Publication type:

Article

Statistical analysis related to the quantification of microhardness and the percentage of martensite after the application of welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3687, doi. 10.1007/s00170-021-07748-2

By:

Valencia, Tania Elizabeth Sandoval;
del Carmen Téllez Anguiano, Adriana;
Caballero, Luis Eduardo Ugalde;
Hernández, Héctor Javier Vergara;
Calderón, Francisco Reyes

Publication type:

Article

Finite element simulation of cutting process under the worn tool edge geometries.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3991, doi. 10.1007/s00170-021-07725-9

By:

Hosseinkhani, Keyvan;
Ng, Eu-gene

Publication type:

Article

Applying hybrid equal channel angular pressing (HECAP) to pure copper using optimized Exp.-ECAP die.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3859, doi. 10.1007/s00170-021-07717-9

By:

Öğüt, Serkan;
Kaya, Hasan;
Kentli, Aykut;
Uçar, Mehmet

Publication type:

Article

A selective assembly strategy to improve mechanical product quality based on Bayesian network and genetic algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3619, doi. 10.1007/s00170-021-07720-0

By:

Liu, Taotao;
Duan, Guijiang

Publication type:

Article

Improved forming accuracy through controlling localized sheet metal deformation in the friction-assisted stretch bending process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3635, doi. 10.1007/s00170-021-07723-x

By:

Xiang, Nan;
Shu, Yiquan;
Wang, Pengyi;
Huang, Tao;
Guo, Xiuhua;
Guo, Junqing;
Chen, Xuewen;
Chen, Fuxiao

Publication type:

Article

In-situ process monitoring for metal additive manufacturing through acoustic techniques using wavelet and convolutional neural network (CNN).

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3473, doi. 10.1007/s00170-021-07721-z

By:

Hossain, Md Shahjahan;
Taheri, Hossein

Publication type:

Article

Effect of temperature on ductile-to-brittle transition in diamond cutting of silicon.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3447, doi. 10.1007/s00170-021-07701-3

By:

He, Wenbin;
Liu, Changlin;
Xu, Guoqing;
Zhang, Jianguo;
Xiao, Junfeng;
Chen, Xiao;
Xu, Jianfeng

Publication type:

Article

Disassembly sequence planning based on a modified grey wolf optimizer.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3731, doi. 10.1007/s00170-021-07696-x

By:

Xie, Jin;
Li, Xinyu;
Gao, Liang

Publication type:

Article

Critical assessment of Shape Retrieval Tools (SRTs).

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3431, doi. 10.1007/s00170-021-07681-4

By:

Xiao, Xinyi;
Joshi, Sanjay;
Cecil, J.

Publication type:

Article

Limit analysis of plane strain compression of cylindrical billets between flat dies.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3561, doi. 10.1007/s00170-021-07711-1

By:

Bina, Ehsan Parvizi;
Haghighat, Heshmatollah

Publication type:

Article

Investigation on the microstructures and mechanical properties of friction stir processed 2A14 aluminum alloy fabricated by different initial precipitation states.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3549, doi. 10.1007/s00170-021-07709-9

By:

Wang, Jian;
Yang, Ke;
Zhou, Dongshuai;
Xie, Li;
Lu, Yalin;
Li, Xingcheng

Publication type:

Article

The effects of die counter-impact on aluminum alloy sheet during electromagnetic forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3593, doi. 10.1007/s00170-021-07704-0

By:

Lin, Yangzhe;
Liu, Wei;
Meng, Zhenghua;
Zeng, Xiaoyong;
Huang, Shangyu

Publication type:

Article

Large ellipsoid parts manufacture using electromagnetic incremental forming with variable blankholder structure.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3699, doi. 10.1007/s00170-021-07695-y

By:

Cui, Xiaohui;
Yan, Ziqin;
Chen, Baoguo;
Du, Zhihao;
Xiao, Ang;
Yu, Hailiang

Publication type:

Article

Improving the fracture toughness of multi-layered commercial pure aluminum via warm accumulative roll bonding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3603, doi. 10.1007/s00170-021-07687-y

By:

Akhavan Attar, Ali;
Alavi Nia, Ali;
Mazaheri, Yousef;
Ghassemali, Ehsan

Publication type:

Article

Multi-granularity feasibility evaluation method of the partial destructive disassembly for an end-of-life product.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3751, doi. 10.1007/s00170-021-07673-4

By:

Guo, Lei;
Zhang, Xiufen

Publication type:

Article

A triple-coil electromagnetic two-step forming method for tube fitting.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3905, doi. 10.1007/s00170-021-07693-0

By:

Xiong, Qi;
Zhao, Xiang;
Zhou, Hang;
Yang, Meng;
Zhou, Lijun;
Gao, Dun;
Li, Shengfei

Publication type:

Article

A study on the method of quality control by restraining the influence of curvature in curved surface polishing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3677, doi. 10.1007/s00170-021-07685-0

By:

Zhou, Jie;
Zhan, Jianming;
Liu, Jing;
Chen, Chin-Yin;
Hu, Liyong

Publication type:

Article

Energy consumption distribution and optimization of additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3377, doi. 10.1007/s00170-021-07653-8

By:

Ma, Zhilin;
Gao, Mengdi;
Wang, Qingyang;
Wang, Nan;
Li, Lei;
Liu, Conghu;
Liu, Zhifeng

Publication type:

Article

A novel multiscale material plasticity simulation model for high-performance cutting AISI 4140 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3891, doi. 10.1007/s00170-021-07643-w

By:

Bai, Jinxuan;
Tong, Zhen

Publication type:

Article

Using uniform design and regression methodology of turning parameters study of nickel alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3795, doi. 10.1007/s00170-021-07584-4

By:

Chen, Shao-Hsien;
Hsu, Chih-Hung

Publication type:

Article

Development of a low-frequency vibration-assisted drilling device for difficult-to-cut materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3517, doi. 10.1007/s00170-021-07668-1

By:

Jiao, Feng;
Li, Yuanxiao;
Wang, Dong;
Tong, Jinglin;
Niu, Ying

Publication type:

Article

Design of a spatial constant-force end-effector for polishing/deburring operations.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3507, doi. 10.1007/s00170-021-07579-1

By:

Ding, Bingxiao;
Zhao, Jiyu;
Li, Yangmin

Publication type:

Article

Modelling of surface roughness and studying of optimal machining position in side milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3651, doi. 10.1007/s00170-021-07463-y

By:

Bai, Jinfeng;
Zhao, Huiying;
Zhao, Lingyu;
Cao, Mingchen;
Duan, Duanzhi

Publication type:

Article

Novel control model of Contact-Tip-to-Work Distance (CTWD) for sound monitoring of arc-based DED processes based on spectral analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3463, doi. 10.1007/s00170-021-07621-2

By:

Chabot, Alexia;
Rauch, Matthieu;
Hascoët, Jean-Yves

Publication type:

Article

Electron beam melting of Ti-6Al-4V lattice structures: correlation between post heat treatment and mechanical properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3535, doi. 10.1007/s00170-021-07619-w

By:

Del Guercio, Giuseppe;
Galati, Manuela;
Saboori, Abdollah

Publication type:

Article

Experimental studies on material removal mechanisms in ultrasonic assisted grinding of SiC ceramics with a defined grain distribution brazed grinding wheel.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3663, doi. 10.1007/s00170-021-07612-3

By:

Ding, Kai;
Li, Qilin;
Zhang, Changdong

Publication type:

Article

Springback and longitudinal bow in chain-die forming U and hat channels.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3571, doi. 10.1007/s00170-021-07374-y

By:

Liang, Zhenye;
Liu, Yang;
Zou, Tianxia;
Li, Dayong;
Ding, Shichao;
Xiao, Hua;
Shi, Lei;
Peng, Yinghong

Publication type:

Article

Imaging sensor data modelling and evaluation based on optical composite characteristics: Investigation of data quality for inline inspection.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3965, doi. 10.1007/s00170-021-07591-5

By:

Meister, Sebastian;
Grundhöfer, Lars;
Stüve, Jan;
Groves, Roger M.

Publication type:

Article

Influence of process parameters on material removal during surface milling of curved carbon fiber-reinforced plastic (CFRP) components: evaluated by a novel residual height calculation method.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3405, doi. 10.1007/s00170-021-07590-6

By:

Wang, Fuji;
Li, Yue;
Zhang, Boyu;
Fan, Junfeng;
Yang, Lelin;
Lin, Yongquan

Publication type:

Article

Theoretical and experimental study of ceramic balls lapping with eccentric plates and eccentric V-groove.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3417, doi. 10.1007/s00170-021-07585-3

By:

Darmiyani, Mohammad Reza;
Amirabadi, Hossein;
Khosravi, Mohammad

Publication type:

Article

A product carbon footprint model for embodiment design based on macro-micro design features.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3839, doi. 10.1007/s00170-021-07557-7

By:

Wang, Geng;
Li, Fangyi;
Zhao, Fu;
Zhou, Lirong;
Huang, Aihua;
Wang, Liming;
Sutherland, John W.

Publication type:

Article

Development of a vibration free machine structure for high-speed micro-milling center.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3489, doi. 10.1007/s00170-021-07533-1

By:

Das, Arnab;
Shukla, Shashank;
Kumar, Mohan;
Singh, Chitransh;
Chandravanshi, Madan Lal;
Bajpai, Vivek

Publication type:

Article

Influence of powder type and binder saturation on binder jet 3D–printed and sintered Inconel 625 samples.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3827, doi. 10.1007/s00170-021-07496-3

By:

Jiang, Runbo;
Monteil, Lorenzo;
Kimes, Katerina;
Mostafaei, Amir;
Chmielus, Markus

Publication type:

Article

A mechanical model of axial and circumferential bidirectional deformation for large thin-walled pipes in the process of continuous and synchronous calibration of roundness and straightness by three rollers.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3809, doi. 10.1007/s00170-021-07479-4

By:

Huang, Xueying;
Yu, Gaochao;
Sun, Honglei;
Zhao, Jun

Publication type:

Article

Exploratory experiment and numerical simulation investigation on a novel flexible skew rolling of hollow shafts.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3391, doi. 10.1007/s00170-021-07360-4

By:

Cao, Xiaoqing;
Wang, Baoyu;
Zhou, Jing;
Shen, Jinxia;
Lin, Longfei

Publication type:

Article

An experimental and finite element investigation of chip separation criteria in metal cutting process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3877, doi. 10.1007/s00170-021-07461-0

By:

Li, Junli;
Huang, Ziru;
Liu, Gang;
An, Qinglong;
Chen, Ming

Publication type:

Article