Works matching IS 02683768 AND DT 2021 AND VI 115 AND IP 7/8

Results: 44

In situ electro-plastic treatment for thermomechanical processing of CP titanium.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2639, doi. 10.1007/s00170-021-07342-6

By:

Khalik, Mohammed Abdul;
Zahiri, Saden H.;
Masood, Syed H.;
Palanisamy, Suresh;
Gulizia, Stefan

Publication type:

Article

Deformation behavior during hot processing of the alloy of the Al-Mg system economically doped with scandium.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2571, doi. 10.1007/s00170-021-07338-2

By:

Dovzhenko, Nikolay Nikolaevich;
Rushchits, Sergey Vadimovich;
Dovzhenko, Ivan Nikolaevich;
Sidelnikov, Sergey Borisovich;
Voroshilov, Denis Sergeevich;
Demchenko, Alexander Igorevich;
Baranov, Vladimir Nikolaevich;
Bezrukikh, Aleksandr Innokentyevich;
Yuryev, Pavel Olegovich

Publication type:

Article

Development of positioning error measurement system based on geometric optics for long linear stage.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2595, doi. 10.1007/s00170-021-07332-8

By:

Liu, Chien-Sheng;
Zeng, Jie-Yu;
Chen, Yu-Ta

Publication type:

Article

A low-cost and highly efficient method of reducing coolant leakage for direct metal printed injection mold with cooling channels using optimum heat treatment process procedures.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2553, doi. 10.1007/s00170-021-07323-9

By:

Kuo, Chil-Chyuan;
Qiu, Shao-Xuan;
Yang, Xin-Yi

Publication type:

Article

A model-driven approach for engineering customizable MES with the application to the food and beverage industry.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2607, doi. 10.1007/s00170-021-07317-7

By:

Chen, Xinyu;
Nophut, Christoph;
Voigt, Tobias

Publication type:

Article

3D printed prototyping tools for flexible sheet metal drawing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2623, doi. 10.1007/s00170-021-07312-y

By:

Frohn-Sörensen, Peter;
Geueke, Michael;
Tuli, Tadele Belay;
Kuhnhen, Christopher;
Manns, Martin;
Engel, Bernd

Publication type:

Article

Finite element analysis and experimental validation of high-speed laser surface hardening process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2403, doi. 10.1007/s00170-021-07303-z

By:

Anusha, Epparla;
Kumar, Adepu;
Shariff, Sulthan Mohiddin

Publication type:

Article

Research on the milling stability of thin-walled parts based on the semi-discretization method of improved Runge-Kutta method.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2325, doi. 10.1007/s00170-021-07302-0

By:

Guo, Muxuan;
Zhu, Lida;
Yan, Boling;
Guan, Zhihong

Publication type:

Article

Use of machine learning algorithms for surface roughness prediction of printed parts in polyvinyl butyral via fused deposition modeling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2465, doi. 10.1007/s00170-021-07300-2

By:

Cerro, Azahara;
Romero, Pablo E.;
Yiğit, Okan;
Bustillo, Andres

Publication type:

Article

Numerical and experimental verification of an iterative coupling method for analyzing the Lorentz-force-driven sheet metal stamping process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2161, doi. 10.1007/s00170-021-07268-z

By:

Du, Limeng;
Li, Xian;
Xia, Liangyu;
Zhang, Xiao;
Lai, Zhipeng;
Han, Xiaotao;
Li, Liang;
Cao, Quanliang

Publication type:

Article

Analytical model for three-dimensional non-uniform temperature field and welding stress of thick plates via friction stir weld.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2343, doi. 10.1007/s00170-021-07266-1

By:

Yu, Haidong;
Xu, Xun;
Chen, Kunyong;
Gao, Chang

Publication type:

Article

Influence of ball milling parameters on microstructure and magnetic properties of aluminum bronze chips reinforced with vanadium carbide.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2205, doi. 10.1007/s00170-021-07250-9

By:

Dias, Alexandre Nogueira Ottoboni;
da Silva, Manoel Ribeiro;
Silva, Gilbert

Publication type:

Article

Assessment of microstructure and mechanical properties of friction stir welded AA2014-O and AA2014-T6 sheets.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2255, doi. 10.1007/s00170-021-07249-2

By:

Muhammad, Wali;
Husain, Wilayat;
Tauqir, Anjum;
Wadood, Abdul;
Zaigham, Hamid;
Ur rehman, Muhammad Atiq

Publication type:

Article

Water disposal minimization of a screw press in the tissue manufacturing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2659, doi. 10.1007/s00170-021-07247-4

By:

Mirzaei, Shokoufeh;
Shen, Luyu

Publication type:

Article

Effects of CeO2 addition on microstructure and properties of ceramics reinforced Fe-based coatings by laser cladding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2581, doi. 10.1007/s00170-021-07297-8

By:

Chen, Liaoyuan;
Zhao, Yu;
Guan, Chuang;
Yu, Tianbiao

Publication type:

Article

A numerical strategy to identify the FSW process optimal parameters of a butt-welded joint of quasi-pure copper plates: modeling and experimental validation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2505, doi. 10.1007/s00170-021-07296-9

By:

Iordache, Monica Daniela;
Badulescu, Claudiu;
Diakhate, Malick;
Constantin, Marius Adrian;
Nitu, Eduard Laurentiu;
Demmouche, Younes;
Dhondt, Matthieu;
Negrea, Denis

Publication type:

Article

Friction stir processing of austenitic stainless steel cold spray coating deposited on 304L stainless steel substrate: feasibility study.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2379, doi. 10.1007/s00170-021-07295-w

By:

Perard, Thomas;
Sova, Alexey;
Robe, Hugo;
Robin, Vincent;
Zedan, Yasser;
Bocher, Philippe;
Feulvarch, Eric

Publication type:

Article

Numerical simulation and experimental investigation on powder transport of a new-type annular coaxial nozzle.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2353, doi. 10.1007/s00170-021-07294-x

By:

Xia, Yelin;
Huang, Zhaozhen;
Chen, Hanning;
Liang, Xiaodan;
Lei, Jianbo

Publication type:

Article

Dynamic stress propagation induced transition of stress state and microstructure characteristics during high-speed cutting of OFHC copper.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2365, doi. 10.1007/s00170-021-07292-z

By:

Liu, Hongguang;
Xiao, Yue;
Zhang, Jun;
Xu, Xiang;
Liu, Zhechao;
Zhao, Wanhua

Publication type:

Article

A multiscale analysis approach to predict mechanical properties in fused deposition modeling parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2269, doi. 10.1007/s00170-021-07287-w

By:

Sánchez-Balanzar, Luis;
Velázquez-Villegas, Fernando;
Ruiz-Huerta, Leopoldo;
Caballero-Ruiz, Alberto

Publication type:

Article

In situ investigation of nanometric cutting of 3C-SiC using scanning electron microscope.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2299, doi. 10.1007/s00170-021-07278-x

By:

Tian, Dongyu;
Xu, Zongwei;
Liu, Lei;
Zhou, Zhanqi;
Zhang, Junjie;
Zhao, Xuesen;
Hartmaier, Alexander;
Liu, Bing;
Song, Le;
Luo, Xichun

Publication type:

Article

Holistic performance analysis during sustainable machining of Inconel 718 with minimum quantity lubrication-based nanofluids.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2219, doi. 10.1007/s00170-021-07276-z

By:

Salem, Amr;
Hegab, Hussien;
Kishawy, Hossam A.

Publication type:

Article

Predicting the dynamic behaviour of the turning tool vibrations using an experimental measurement, numerical simulation and analytical modelling for comparative study.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2533, doi. 10.1007/s00170-021-07275-0

By:

Abainia, Sadredine;
Ouelaa, Nouredine

Publication type:

Article

AZ31 magnesium alloy tube manufactured by composite forming technology including extruded-shear and bending based on finite element numerical simulation and experiments.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2395, doi. 10.1007/s00170-021-07242-9

By:

Hu, Hongjun;
Hong, Xing;
Tian, Ye;
Zhang, Dingfei

Publication type:

Article

A new sealing technology for ultra-thin glass to aluminum alloy by laser transmission welding method.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2017, doi. 10.1007/s00170-021-07226-9

By:

Min, Zhang;
Yufei, Chan;
Changjun, Chen;
Zhaoling, Qiu

Publication type:

Article

Accurate and computationally efficient approach for simultaneous feedrate optimization and servo error pre-compensation of long toolpaths—with application to a 3D printer.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2069, doi. 10.1007/s00170-021-07200-5

By:

Kim, Heejin;
Okwudire, Chinedum E.

Publication type:

Article

Research on a novel fabricating method of diamond grinding tool with defined grain arrangement.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2233, doi. 10.1007/s00170-021-07199-9

By:

Cheng, Jun;
Wu, Jun;
Guo, Zhaozhi;
Gao, Chunchun;
Yu, Tao

Publication type:

Article

Effects of gas medium on submersed gas-flushing electrical discharge machining of different metal materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2313, doi. 10.1007/s00170-021-07192-2

By:

Jiang, Yi;
Ping, Xueliang;
Zhang, Ya'ou;
Zhao, Wansheng

Publication type:

Article

Online monitoring of diamond grinding wheel wear based on linear discriminant analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2111, doi. 10.1007/s00170-021-07190-4

By:

Bi, Guo;
Zheng, Shouhong;
Zhou, Lian

Publication type:

Article

CAD integrated automatic recognition of weld paths.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2145, doi. 10.1007/s00170-021-07186-0

By:

Tran, Tuan Anh;
Lobov, Andrei;
Kaasa, Tord Hansen;
Bjelland, Morten;
Midling, Ole Terje

Publication type:

Article

Experimental study on the brush tool–assisted shear-thickening polishing of cemented carbide insert.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2491, doi. 10.1007/s00170-021-07176-2

By:

Lyu, Binghai;
Ke, Mingfeng;
Fu, Lin;
Duan, Shixiang;
Shao, Qi;
Zhou, Yafeng;
Yuan, Julong

Publication type:

Article

Kinematic analysis and process stability of ultrasonic-assisted drilling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2049, doi. 10.1007/s00170-021-07165-5

By:

Georgi, Oliver;
Rüger, Carlo;
Rentzsch, Hendrik;
Putz, Matthias

Publication type:

Article

Milling force modeling for disc milling cutter of indexable three-sided inserts considering tool runout.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2191, doi. 10.1007/s00170-021-07133-z

By:

Xian, Chao;
Shi, Yaoyao;
Luo, Jie;
Yang, Cheng

Publication type:

Article

Drill-milling process and novel drill-milling tool for making a hole on carbon fiber–reinforced plastics.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2125, doi. 10.1007/s00170-021-07110-6

By:

Su, Fei;
Li, Wenyi;
Juan, Chen;
Xu, Xu;
Li, Chunjie

Publication type:

Article

Screw thermal characteristic analysis and error prediction considering the two-dimensional heat transfer structure.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2433, doi. 10.1007/s00170-021-07087-2

By:

Chen, Yu;
Chen, Jihong;
Xu, Guangda

Publication type:

Article

A new energy consumption model suitable for processing multiple materials in end milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2521, doi. 10.1007/s00170-021-07078-3

By:

Zhou, Lirong;
Li, Fangyi;
Wang, Liming;
Wang, Yue;
Wang, Geng

Publication type:

Article

Optimization of metallic powder filaments for additive manufacturing extrusion (MEX).

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2449, doi. 10.1007/s00170-021-07043-0

By:

Cerejo, Fábio;
Gatões, Daniel;
Vieira, M. T.

Publication type:

Article

Analysis of the operating conditions of pulse electric field–assisted EHD for sodium alginate printing using design of experiment approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2037, doi. 10.1007/s00170-021-07042-1

By:

Rahman, Taieba Tuba;
Arman, Md Shakil;
Perez, Victoria;
Xu, Ben;
Li, Jianzhi

Publication type:

Article

Extreme wire electrical discharge machining based on semiconductor characteristics.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2477, doi. 10.1007/s00170-021-07019-0

By:

Pan, Hongwei;
Liu, Zhidong;
Qiu, Mingbo;
Zhang, Ming;
Deng, Cong

Publication type:

Article

Mechanism design and process control of micro-EDM for drilling deep hole of bellows.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2423, doi. 10.1007/s00170-021-06975-x

By:

Yu, Peng;
Xu, Jinkai;
Hou, Yonggang;
Yu, Huadong

Publication type:

Article

Modelling of the temperature distribution based on equivalent heat transfer theory and anisotropic characteristics of honeycomb core during milling of aluminum honeycomb core.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2097, doi. 10.1007/s00170-021-06943-5

By:

Ming, Weiwei;
Yu, Weiwei;
Qiu, Kunxian;
An, Qinglong;
Chen, Ming

Publication type:

Article

In-process detection of grinding burn using machine learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2281, doi. 10.1007/s00170-021-06896-9

By:

Sauter, Emil;
Sarikaya, Erkut;
Winter, Marius;
Wegener, Konrad

Publication type:

Article

A generic method for multi-criterion decision-making problems in design for additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2083, doi. 10.1007/s00170-021-06832-x

By:

Huang, Meifa;
Chen, Leilei;
Zhong, Yanru;
Qin, Yuchu

Publication type:

Article

Milling vibration control of semiconical shell workpiece with multiple distribution tuned mass dampers.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2175, doi. 10.1007/s00170-020-06427-y

By:

Qin, Peng;
Liu, Yunan;
Wang, Min;
Zhang, Yanlin

Publication type:

Article