Works matching IS 02683768 AND DT 2021 AND VI 114 AND IP 11/12

Results: 44

Tool wear prediction in milling based on a GSA-BP model with a multisensor fusion method.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3793, doi. 10.1007/s00170-021-07152-w

By:

Meng, Xiangfei;
Zhang, Jingjie;
Xiao, Guangchun;
Chen, Zhaoqiang;
Yi, Mingdong;
Xu, Chonghai

Publication type:

Article

Smart tribo-peening process for surface functionalization through digital twin concept.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3695, doi. 10.1007/s00170-021-07143-x

By:

Levy, Benjamin;
El Mansori, Mohamed;
El Hadrouz, Mourad;
Mezghani, Sabeur;
Beaudonnet, Anne-Laure;
Cabrero, Julien

Publication type:

Article

Wear performance and mechanisms of PCBN tools in boring of powder metallurgy steels.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3605, doi. 10.1007/s00170-021-07136-w

By:

Zhang, Rui;
Lv, Dejin;
Wang, Yongguo

Publication type:

Article

Cold and warm flaring of thin-walled titanium tube using single-point incremental forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3357, doi. 10.1007/s00170-021-07135-x

By:

Aghabeyki, Farid;
Mirnia, Mohammad Javad;
Elyasi, Majid

Publication type:

Article

Influence of in situ postweld heat treatment on microstructure and failure behavior of dual-phase steel resistance spot weld.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3739, doi. 10.1007/s00170-021-07134-y

By:

Soomro, Imtiaz Ali;
Pedapati, Srinivasa Rao;
Awang, Mokhtar

Publication type:

Article

Thermal simulation of the single discharge for electro-spark deposition diamond wire saw.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3597, doi. 10.1007/s00170-021-07132-0

By:

Li, Chengyun;
Ge, Peiqi;
Bi, Wenbo

Publication type:

Article

Modelling and simulation of controlled depth abrasive water jet machining (AWJM) for roughing passes of free-form surfaces.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3581, doi. 10.1007/s00170-021-07131-1

By:

Ozcan, Yigit;
Tunc, Lutfi Taner;
Kopacka, Jan;
Cetin, Beril;
Sulitka, Matej

Publication type:

Article

Thermomechanical finite element simulation and correlation analysis for orthogonal cutting of normalized AISI 9310 steels.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3337, doi. 10.1007/s00170-021-07130-2

By:

Miller, Lilia;
Zhou, Kai;
Tang, Jiong;
Frame, Lesley D.;
Hebert, Rainer J.;
Narayan, Lakshmi Ravi;
Alpay, S. Pamir;
Merkouriou, Alexandra;
Kim, Jeongho

Publication type:

Article

A big data mining approach for environmental emissions prediction of die casting process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3779, doi. 10.1007/s00170-021-07125-z

By:

Chen, Erheng;
Cao, Huajun;
Li, Hongcheng;
Yi, Hao;
Li, Yanni

Publication type:

Article

Finite element simulation and experiment of a new ring constrained groove pressing for 5083 aluminum alloy based on cyclic stress state.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3503, doi. 10.1007/s00170-021-07124-0

By:

Gu, Yongfei;
Li, Hongfeng;
Huang, Zhiheng;
Zhang, Chunxiang;
Luo, Junting

Publication type:

Article

A laboratory-scale binder jet additive manufacturing testbed for process exploration and material development.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3459, doi. 10.1007/s00170-021-07123-1

By:

Oropeza, Daniel;
Hart, A. John

Publication type:

Article

The hybrid force/position anti-disturbance control strategy for robot abrasive belt grinding of aviation blade base on fuzzy PID control.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3645, doi. 10.1007/s00170-021-07122-2

By:

Zhang, Hongyao;
Li, Lun;
Zhao, Jibin;
Zhao, Jingchuan

Publication type:

Article

Effect of laser scanning angle and atmospheric oxygen on mechanical properties and microstructural morphology of selective laser-sintered aluminum-filled polyamide monolayers.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3449, doi. 10.1007/s00170-021-07120-4

By:

Alamos, Fernando J.;
Ramos-Grez, Jorge A.;
Valenzuela, Loreto M.

Publication type:

Article

Optimization of process parameters for direct energy deposited Ti-6Al-4V alloy using neural networks.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3269, doi. 10.1007/s00170-021-07115-1

By:

Narayana, Pasupuleti Lakshmi;
Kim, Jae Hyeok;
Lee, Jaehyun;
Choi, Seong-Woo;
Lee, Sangwon;
Park, Chan Hee;
Yeom, Jong-Taek;
Reddy, Nagireddy Gari Subba;
Hong, Jae-Keun

Publication type:

Article

Simulation of the laser-material interaction of ultrashort pulse laser processing of silicon nitride workpieces and the key factors in the ablation process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3719, doi. 10.1007/s00170-021-07111-5

By:

Soltani, Babak;
Hojati, Faramarz;
Daneshi, Amir;
Azarhoushang, Bahman

Publication type:

Article

Influence of machining conditions on tool wear and surface characteristics in hot turning of AISI630 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3515, doi. 10.1007/s00170-021-07106-2

By:

Ebrahimi, Seyed Mohammad;
Hadad, Mohammadjafar;
Araee, Alireza;
Ebrahimi, Seyed Hamid

Publication type:

Article

An investigation into melting modes in selective laser melting of Inconel 625 powder: single track geometry and porosity.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3255, doi. 10.1007/s00170-021-07105-3

By:

Shrestha, Subin;
Chou, Kevin

Publication type:

Article

Surface quality and geometric accuracy control of fuel nozzle single-pass honing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3325, doi. 10.1007/s00170-021-07103-5

By:

Yang, Changyong;
Su, Hao;
Gao, Shaowu;
Fu, Yucan;
Ding, Wenfeng;
Xu, Jiuhua

Publication type:

Article

Quality research and prediction of six-order variable-diameter pipe processed by solid-liquid two-phase magnetic abrasive flow.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3763, doi. 10.1007/s00170-021-07101-7

By:

Li, Junye;
Dong, Xiwei;
Liu, Yang;
Li, Xueguang;
Zhang, Xinming;
Zhao, Weihong;
Wang, Fei

Publication type:

Article

Approximation model for longitudinal-crowned involute helical gears with flank twist in continuous generating grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3675, doi. 10.1007/s00170-021-07099-y

By:

Yu, Bo;
Kou, Hanlin;
Zhao, Baoya;
Shi, Zhaoyao;
Sun, Yanqiang;
Wu, Guoqing

Publication type:

Article

Application of bionic phyllotaxis in internal cooling cup wheel: modeling-simulation and experimental verification.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3803, doi. 10.1007/s00170-021-07097-0

By:

Peng, Ruitao;
Luo, Yue;
Liu, Bo;
Tong, Jiawei;
Zhao, Linfeng

Publication type:

Article

A review on the microblanking technology of metallic foils.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3185, doi. 10.1007/s00170-021-07096-1

By:

Ji, Kaisheng;
Liu, Yanxiong;
Liu, Shuaiying;
Zhang, Yijun

Publication type:

Article

Microstructure and mechanical properties of spark plasma diffusion-bonded 5A06Al joints with Al–20Cu–5Si–2Ni interlayer.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3627, doi. 10.1007/s00170-021-07094-3

By:

Song, Kuijing;
Lv, Lei;
Zhu, Shuai;
Liu, Fei;
Luo, Junrui;
Qing, Zhenhua;
Zhong, Zhihong;
Zhu, Zhixiong;
Wu, Yucheng

Publication type:

Article

Geometric error identification for machine tools using a novel 1D probe system.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3475, doi. 10.1007/s00170-021-07093-4

By:

Chen, Jianxiong;
Lin, Shuwen;
Gu, Tianqi

Publication type:

Article

Analytical modeling of grinding force and experimental study on ultrasonic-assisted forming grinding gear.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3657, doi. 10.1007/s00170-021-07086-3

By:

Yin, Long;
Zhao, Bo;
Huo, Bingjun;
Bie, Wenbo;
Zhao, Chongyang

Publication type:

Article

Grinding method of noncircular glass ornaments based on successive approximation and discrete cross-coupling iterative learning control.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3823, doi. 10.1007/s00170-021-07076-5

By:

Li, Xungen;
Lv, Shuaishuai;
Pan, Mian;
Ma, Qi;
Cai, Wenyu;
Yu, Haibin

Publication type:

Article

Research on the efficient self-adaptive servo-control strategy in micro-EDM milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3563, doi. 10.1007/s00170-021-07074-7

By:

Jing, Qi;
Li, Jian;
Zhang, Yongbin;
Liu, Guangmin;
Ji, Fang;
Xu, Min

Publication type:

Article

Machinability investigations on CFRP composites: a comparison between sustainable cooling conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3201, doi. 10.1007/s00170-021-07073-8

By:

Danish, Mohd;
Gupta, Munish Kumar;
Rubaiee, Saeed;
Ahmed, Anas;
Mahfouz, A.;
Jamil, Muhammad

Publication type:

Article

Ultrasonic vibration–assisted incremental sheet metal forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3311, doi. 10.1007/s00170-021-07068-5

By:

Zhang, Liangchi;
Wu, Chuhan;
Sedaghat, Hossein

Publication type:

Article

Heat-assisted incremental bending of metal plates with unsymmetrical curvatures.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3437, doi. 10.1007/s00170-021-07067-6

By:

Wei, Bo;
Zhang, Feifei;
He, Kai;
Zhou, Chenghui;
Du, Ruxu

Publication type:

Article

Study of voltage regulation strategy in electrochemical machining of blisk channels using tube electrodes.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3489, doi. 10.1007/s00170-021-07065-8

By:

Zong, Yawei;
Liu, Jia;
Zhu, Di

Publication type:

Article

A multi-scale modelling framework for anisotropy prediction in aluminium alloy sheet and its application in the optimisation of the deep-drawing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3401, doi. 10.1007/s00170-021-07060-z

By:

Liu, Wencheng;
Pang, Yong

Publication type:

Article

A numerical approach for the modelling of forming limits in hot incremental forming of AZ31 magnesium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3229, doi. 10.1007/s00170-021-07059-6

By:

Campanella, Davide;
Buffa, Gianluca;
Lo Valvo, Ernesto;
Fratini, Livan

Publication type:

Article

Translating value stream maps into system dynamics models: a practical framework.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3537, doi. 10.1007/s00170-021-07053-y

By:

de Assis, Rodrigo Furlan;
de Santa-Eulalia, Luis Antonio;
Ferreira, William de Paula;
Armellini, Fabiano;
Anholon, Rosley;
Rampasso, Izabela Simon;
Santos, João Guilherme Cruz Lopes dos

Publication type:

Article

Fabrication of monolithic SU-8 microneedle arrays having different needle geometries using a simplified process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3615, doi. 10.1007/s00170-021-07038-x

By:

A P, Ajay;
DasGupta, Amitava;
Chatterjee, Dhiman

Publication type:

Article

Novel monitoring method for material removal rate considering quantitative wear of abrasive belts based on LightGBM learning algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3241, doi. 10.1007/s00170-021-06988-6

By:

Wang, Nina;
Zhang, Guangpeng;
Pang, Wanjing;
Ren, Lijuan;
Wang, Yupeng

Publication type:

Article

Digital twin–driven aero-engine intelligent predictive maintenance.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3751, doi. 10.1007/s00170-021-06976-w

By:

Xiong, Minglan;
Wang, Huawei;
Fu, Qiang;
Xu, Yi

Publication type:

Article

Milling force model prediction considering tool runout with three-teeth alternating disc cutter.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3285, doi. 10.1007/s00170-021-06949-z

By:

Cheng, Yang;
Yaoyao, Shi;
Hongmin, Xin;
Nan, Zhang

Publication type:

Article

Visualization and evaluation of the spatial kinematic rotation error of a five-axis abrasive water jet cutting head.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3217, doi. 10.1007/s00170-021-06935-5

By:

Wu, Yuqiang;
Lei, Yuyong;
Zhang, Shijin;
Wu, Zhiyuan

Publication type:

Article

A hybrid additive manufacturing platform based on fused filament fabrication and direct ink writing techniques for multi-material 3D printing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3551, doi. 10.1007/s00170-021-06891-0

By:

Cadiou, Thibaut;
Demoly, Frédéric;
Gomes, Samuel

Publication type:

Article

Effect of cutting speed on surface integrity and chip formation in micro-cutting of Zr-based bulk metallic glass.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3301, doi. 10.1007/s00170-021-06863-4

By:

Chau, Sau Yee;
To, Suet;
Wang, Hao;
Yip, Wai Sze;
Chan, Kang Cheung;
Cheung, Chi Fai

Publication type:

Article

Research on double-rotor dynamic grinding model and simulation algorithm for crankshaft main journal.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3391, doi. 10.1007/s00170-021-06761-9

By:

Zeng, Xu;
Xiong, Wanli;
Sun, Wenbiao;
Ye, Hongyan;
Tang, Zhiyong

Publication type:

Article

Erosion analysis and experimental research of gas-liquid-solid soft abrasive flow polishing based on cavitation effects.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3419, doi. 10.1007/s00170-021-06752-w

By:

Ge, Man;
Ji, Shiming;
Tan, Dapeng;
Cao, Huiqiang

Publication type:

Article

Improved semi-discretization method based on predictor-corrector scheme for milling stability analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3377, doi. 10.1007/s00170-021-06747-7

By:

Liu, Kenan;
Zhang, Yang;
Gao, Xiaoyang;
Yang, Wanxia;
Sun, Wei;
Dai, Fei

Publication type:

Article