Works matching IS 02683768 AND DT 2021 AND VI 112 AND IP 5/6

Results: 40

Effects of workpiece polarity and flushing pressure on the arc plasma and the crater of single-pulsed arc discharges.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1593, doi. 10.1007/s00170-020-06549-3

By:

Zhang, Min;
Jiang, Xi;
Feng, Yong;
Jia, Binghui;
Wang, Jian

Publication type:

Article

The impact of the organization of the visual inspection process on its effectiveness.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1295, doi. 10.1007/s00170-020-06543-9

By:

Kujawińska, Agnieszka;
Diering, Magdalena

Publication type:

Article

A physically based constitutive model of microstructural evolution of Ti6Al4V hard machining under different lubri-cooling conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1641, doi. 10.1007/s00170-020-06540-y

By:

Rinaldi, Sergio;
Rotella, Giovanna;
Del Prete, Antonio

Publication type:

Article

Applying fuzzy grey relationship analysis and Taguchi method in polishing surfaces of magnetic materials by using magnetorheological fluid.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1675, doi. 10.1007/s00170-020-06567-1

By:

Nguyen, Duytrinh;
Wu, Jinzhong;
Quang, Nguyen Minh;
Duc, Le Anh;
Son, Phung Xuan

Publication type:

Article

A digital twin-based layout optimization method for discrete manufacturing workshop.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1307, doi. 10.1007/s00170-020-06568-0

By:

Guo, Hongfei;
Zhu, Yingxin;
Zhang, Yu;
Ren, Yaping;
Chen, Minshi;
Zhang, Rui

Publication type:

Article

Research on the water cavitation peening process and mechanism of TC4 titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1259, doi. 10.1007/s00170-020-06566-2

By:

He, Peiyu;
Li, Fuzhu;
Guo, Jun;
Chen, Shangshuang;
Guo, Yuqin;
Wang, Yun;
Tan, Zhongrui

Publication type:

Article

Mechanical behavior and collapse mechanisms of innovative aluminum foam-based sandwich panels under three-point bending.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1631, doi. 10.1007/s00170-020-06564-4

By:

Formisano, Antonio;
Durante, Massimo;
Viscusi, Antonio;
Carrino, Luigi

Publication type:

Article

Numerical simulation and experimental study on cold extrusion process for clutch outer gear hub with inner tooth shapes.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1437, doi. 10.1007/s00170-020-06550-w

By:

Liu, Zuofa;
Zhou, Jie;
Fan, Yingbao;
Wang, Hang;
Feng, Wenjie

Publication type:

Article

Theoretical and experimental study on hybrid laser and shaped tube electrochemical machining (Laser-STEM) process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1601, doi. 10.1007/s00170-020-06558-2

By:

Wang, Yufeng;
Zhang, Wenwu

Publication type:

Article

STEP/STEP-NC-compliant manufacturing information of 3D printing for FDM technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1713, doi. 10.1007/s00170-020-06539-5

By:

Xiao, Jinhua;
Eynard, Benoît;
Anwer, Nabil;
Durupt, Alexandre;
Le Duigou, Julien;
Danjou, Christophe

Publication type:

Article

Biomimetic strategies for fabricating musculoskeletal tissue scaffolds: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1211, doi. 10.1007/s00170-020-06538-6

By:

Zhou, Yingge;
Sooriyaarachchi, Dilshan;
Liu, Defu;
Tan, George Z.

Publication type:

Article

Finite element analysis on electromagnetic forming of DP780 high-strength steel sheets.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1617, doi. 10.1007/s00170-020-06537-7

By:

Liu, Dahai;
Li, Bo;
Guo, Zhenghua;
Huang, Zengxin

Publication type:

Article

An experimental investigation on heat transfer performance of electrostatic spraying used in machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1285, doi. 10.1007/s00170-020-06529-7

By:

Su, Yu;
Jiang, Hai;
Liu, Zhiqiang

Publication type:

Article

Assessment of cyclic utilization of coated cemented carbide inserts for turning of Inconel 718.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1583, doi. 10.1007/s00170-020-06520-2

By:

Yun, Hao;
Zou, Bin;
Wang, Jun;
Huang, Chuanzhen;
Shi, Zhenyu

Publication type:

Article

Effect of mechanical action and passive film on electrochemical mechanical finishing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1787, doi. 10.1007/s00170-020-06510-4

By:

Liu, Junjie;
Adayi, Xieeryazidan

Publication type:

Article

Stability of micro-milling thin-walled part process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1529, doi. 10.1007/s00170-020-06509-x

By:

Jia, Zhenyuan;
Lu, Xiaohong;
Yang, Kun;
Sun, Xvdong;
Liang, Steven Y.

Publication type:

Article

Study on surface integrity and material removal mechanism in eco-friendly grinding of Inconel 718 using numerical and experimental investigations.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1797, doi. 10.1007/s00170-020-06528-8

By:

Esmaeili, Hamed;
Adibi, Hamed;
Rezaei, Seyed Mehdi

Publication type:

Article

Microstructure affected residual stress prediction based on mechanical threshold stress in direct metal deposition of Ti-6Al-4 V.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1705, doi. 10.1007/s00170-020-06526-w

By:

Mirkoohi, Elham;
Mahdavi, Mostafa;
Li, Dongsheng;
Garmestani, Hamid;
Liang, Steven Y.

Publication type:

Article

Nondestructive characterization of mechanical properties on metallic and polymer plates using hybrid laser-air coupled ultrasonic techniques.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1767, doi. 10.1007/s00170-020-06463-8

By:

Bustamante, Leslie;
Jeyaprakash, Natarajan;
Yang, Che-Hua;
Tseng, Sheng-Po

Publication type:

Article

Novel flexible cores in rotary draw bending forming: applied for the commercial vehicle anti-collision beam with rectangular ribbed (日-shaped) section.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1545, doi. 10.1007/s00170-020-06516-y

By:

Liang, Jicai;
Liang, Tian;
Li, Yi;
Liang, Ce

Publication type:

Article

Metallic glass properties, processing method and development perspective: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1231, doi. 10.1007/s00170-020-06515-z

By:

Halim, Qayyum;
Mohamed, Nik Abdullah Nik;
Rejab, Mohd Ruzaimi Mat;
Naim, Wan Naimah Wan Abdul;
Ma, Quanjin

Publication type:

Article

The effect of heat generated on mechanical properties of friction stir welded aluminum alloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1513, doi. 10.1007/s00170-020-06462-9

By:

Bocchi, Sara;
D'Urso, Gianluca;
Giardini, Claudio

Publication type:

Article

Residual stress homogenization of SiCP/Al composites with thermal vibration coupling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1691, doi. 10.1007/s00170-020-06458-5

By:

Wu, Qiong;
Miao, Wei-shou;
Gao, Han-jun;
Zhang, Yi-du;
Xie, Dong-jian;
Yang, Min

Publication type:

Article

Multi-objective robust evolutionary optimization of the boring process of AISI 4130 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1745, doi. 10.1007/s00170-020-06455-8

By:

Vieira, Jéssica Tito;
Pereira, Robson Bruno Dutra;
Freitas, Samuel Alves;
Lauro, Carlos Henrique;
Brandão, Lincoln Cardoso

Publication type:

Article

Thermal error modeling and compensation of multilink high-speed precision press system.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1729, doi. 10.1007/s00170-020-06442-z

By:

Zheng, Enlai;
Cui, Song;
Zhu, Rui;
Wang, Yongjian;
Zhu, Yue;
Kang, Min

Publication type:

Article

Analysis of influencing factors for the dressing process in double side face grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1571, doi. 10.1007/s00170-020-06507-z

By:

Uhlmann, Eckart;
Lichtschlag, Linus

Publication type:

Article

Experimental study on surface integrity changes during turning-ultrasonic impact of nickel alloy 718.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1359, doi. 10.1007/s00170-020-06503-3

By:

Yao, Changfeng;
Zhou, Zheng;
Zhao, Yu;
Tan, Liang;
Cui, Minchao;
Wang, Yang

Publication type:

Article

Springback control and plastic deformation of metal plates with large curvature in heat-assisted incremental bending process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1483, doi. 10.1007/s00170-020-06492-3

By:

Wei, Bo;
Wei, Yanan;
Zhang, Feifei;
He, Kai;
Dang, Xiaobing;
Du, Ruxu

Publication type:

Article

Tribology performance of laser-peened MB8 magnesium alloy under different working conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1661, doi. 10.1007/s00170-020-06491-4

By:

Nie, Xiangfan;
Zhao, Feifan;
Tian, Le;
Yan, Li

Publication type:

Article

Multi-objective optimization of coating properties and cladding efficiency in 316L/WC composite laser cladding based on grey relational analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1449, doi. 10.1007/s00170-020-06486-1

By:

Lian, Guofu;
Xiao, Shihong;
Zhang, Yang;
Jiang, Jibin;
Zhan, Youji

Publication type:

Article

Parameterized multipoint-line analytical modeling of a mobile heat source for thermal field prediction in laser beam welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1339, doi. 10.1007/s00170-020-06479-0

By:

Giudice, Fabio;
Missori, Severino;
Sili, Andrea

Publication type:

Article

Literature review and prospect of the development and application of FMEA in manufacturing industry.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1409, doi. 10.1007/s00170-020-06425-0

By:

Wu, Zhongyi;
Liu, Weidong;
Nie, Wenbin

Publication type:

Article

Milling stability prediction based on the hybrid interpolation scheme of the Newton and Lagrange polynomials.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1501, doi. 10.1007/s00170-020-06420-5

By:

Xia, Yan;
Wan, Yi;
Luo, Xichun;
Liu, Zhanqiang;
Song, Qinghua

Publication type:

Article

Announcement of B. John Davies Prize for the best paper published in IJAMT in 2019.

Published in:

2021

By:

Schilgerius, Silvia;
Nee, Andrew Y. C.

Publication type:

Editorial

A predictive model for in situ distortion correction in laser powder bed fusion using laser shock peen forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1319, doi. 10.1007/s00170-020-06399-z

By:

Sunny, Sumair;
Yu, Haoliang;
Mathews, Ritin;
Malik, Arif

Publication type:

Article

Investigations on tool clogging and surface integrity in ultrasonic vibration-assisted slot grinding of unidirectional CFRP.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1557, doi. 10.1007/s00170-020-06364-w

By:

Liang, Yuhong;
Chen, Yan;
Zhu, Yejun;
Ji, Junjie;
Ding, Wenfeng

Publication type:

Article

Simulation of sheet metal forming processes by presenting a bending-dependent inverse isogeometric methodology.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1389, doi. 10.1007/s00170-020-06348-w

By:

Shamloofard, Mansoor;
Assempour, Ahmad

Publication type:

Article

Comparative performance analysis of cemented carbide, TiN, TiAlN, and PCD coated inserts in dry machining of Al 2024 alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1461, doi. 10.1007/s00170-020-06315-5

By:

Uddin, Ghulam Moeen;
Joyia, Farooq Mustafa;
Ghufran, Muhammad;
Khan, Sarmad Ali;
Raza, Mohsin Ali;
Faisal, Muhammad;
Arafat, Syed Muhammad;
Zubair, Syed Wasim Hassan;
Jawad, Muhammad;
Zafar, Muhammad Qasim;
Irfan, Muhammad;
Waseem, Bilal;
Chaudhry, Ijaz Ahmad;
Zeid, Ibrahim

Publication type:

Article

A novel method with Newton polynomial-Chebyshev nodes for milling stability prediction.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1373, doi. 10.1007/s00170-020-06090-3

By:

Dai, Yuebang;
Li, Hongkun;
Yang, Guowei;
Peng, Defeng

Publication type:

Article

Effect of crystallographic orientation on residual stress induced in micro-grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 112, n. 5/6, p. 1271, doi. 10.1007/s00170-020-06329-z

By:

Zhao, Man;
Mao, Jian;
Ji, Xia;
Feng, Yixuan;
Liang, Steven Y.

Publication type:

Article