Works matching IS 0268-3768 AND VI 139 AND IP 3 AND DT 2025

Results: 60

Stress and crack analysis in PBF-LB IN738 with heat treatment.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 2073, doi. 10.1007/s00170-025-16016-6

By:

Safizadeh, Sara;
Wuthrich, Rolf;
Kwok, Tsz Ho

Publication type:

Article

Tolerance of lattice struts manufactured without supports via fused filament fabrication.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1933, doi. 10.1007/s00170-025-16003-x

By:

Robles-Lorite, Laura;
García-Collado, Alberto;
Torres-Jiménez, Eloísa;
Dorado-Vicente, Rubén

Publication type:

Article

ANOVA-based analysis of cutting parameters on surface roughness in aluminum milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1945, doi. 10.1007/s00170-025-15997-8

By:

Belamri, Abdelatif;
Makhloufi, Yacine;
Methia, Mounir;
Yousfi, Rachid;
Sad Eddine, Abdelhamid;
Benslimane, Abdelhakim

Publication type:

Article

Indirect effect of print surface bed temperature on surface roughness and dimensional accuracy of SLS polyamide 12 sintered parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1897, doi. 10.1007/s00170-025-15995-w

By:

Jabri, Fatima-Ezzahrae;
Ouballouch, Aissa;
Lasri, Larbi;
El Alaiji, Rachid

Publication type:

Article

The application of statistical methods and optimization algorithms to determine the injection moulding parameters in soft tooling.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 2027, doi. 10.1007/s00170-025-15990-1

By:

de Souza Amarante, Evandro Menezes;
de Oliveira, João Paulo Rios Brandão;
Beal, Valter Estevão;
Ferreira, Cristiano Vasconcellos;
Ribeiro Junior, Armando Sá

Publication type:

Article

Change of the machined hole wall surface roughness, microstructure and microhardness of low alloy steel caused by drill-guide-pads during BTA deep hole drilling.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1595, doi. 10.1007/s00170-025-15989-8

By:

Li, Binghao;
Huang, Chuanzhen;
Chen, Zhen;
Liu, Hanlian;
Niu, Jiahui;
Wang, Jun;
Wang, Zhen;
Xu, Longhua;
Huang, Shuiquan

Publication type:

Article

In situ optical monitoring for geometric accuracy and error detection in extrusion-based additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1791, doi. 10.1007/s00170-025-15988-9

By:

Lin, Mei-Jyun;
Li, Dian-Ru

Publication type:

Article

Optimising apparel production in Industry 5.0 using a human-centric flexible manufacturing approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1881, doi. 10.1007/s00170-025-15987-w

By:

Bao, Nengsheng;
Yang, Yuping;
Fan, Yuchen;
Simeone, Alessandro

Publication type:

Article

Laser-based powder bed fusion additive manufacturing of thinner walls through re-melting.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1863, doi. 10.1007/s00170-025-15976-z

By:

Mezghani, Adnen;
Nassar, Abdalla R.;
Simpson, Timothy W.

Publication type:

Article

Advanced metaheuristic-based optimization for tensile strength in fused filament fabricated acrylonitrile butadiene styrene parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1843, doi. 10.1007/s00170-025-15985-y

By:

Sagar, Prem;
Kumar, Gitesh;
Garg, Hem Chander;
Khatak, Pankaj;
Huang, Yi;
Ashokkumar, M.

Publication type:

Article

Digital variant design V-model for rapid product development.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 2103, doi. 10.1007/s00170-025-15982-1

By:

Liu, Pei Sen;
Chin, Jeng Feng;
Ab-Samat, Hasnida;
Xie, Zhi Ping

Publication type:

Article

Smoothing of large-area copper foils using underwater shock waves: an experimental study and numerical simulation on the effects of shock wave duration on the process.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1831, doi. 10.1007/s00170-025-15981-2

By:

Naya, Takuma;
Tanaka, Shigeru;
Hasegawa, Kouki;
Tokuda, Makoto;
Kasamura, Keiji;
Kubota, Akihisa;
Hokamoto, Kazuyuki

Publication type:

Article

Optimization of main process control parameters of PHA bio-polymer in material extrusion additive manufacturing: experimental design and predictive models.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1607, doi. 10.1007/s00170-025-15978-x

By:

Vidakis, Nectarios;
Petousis, Markos;
Mountakis, Nikolaos;
Spyridaki, Maria;
Gkagkanatsiou, Katerina;
Stratakis, Emmanuel

Publication type:

Article

Design and fabrication of resistive sensor using additive manufacturing techniques for robotic application.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1711, doi. 10.1007/s00170-025-15977-y

By:

MostaghniYazdi, Donya;
Khalid, Muhammad Usman;
Frascio, Mattia;
Zoppi, Matteo

Publication type:

Article

High-speed tableware collection/pre-washing robotic system with rigid fingertips connected only to bellows actuators gripper.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1493, doi. 10.1007/s00170-025-15975-0

By:

Mori, Yoshiki;
Matsuno, Koji;
Wang, Zhongkui;
Kawamura, Sadao

Publication type:

Article

Research on thickness uniformity based on FE iterative control.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1685, doi. 10.1007/s00170-025-15974-1

By:

Liu, Luteng;
Lu, Shihong;
Li, Long;
Liu, Saisai;
Shi, Yujie

Publication type:

Article

On thermomechanical compatibility in ceramic/metal interpenetrating phase composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1747, doi. 10.1007/s00170-025-15980-3

By:

Gusarov, Andrey V.;
Podrabinnik, Pavel A.;
Pinargote, Nestor Washington Solís;
Pristinskiy, Yuri O.;
Tarasova, Tatiana V.;
Grigoriev, Sergey N.

Publication type:

Article

An integrated dynamic modeling and stiffness compensation approach for precision roller rotary table machine.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1723, doi. 10.1007/s00170-025-15972-3

By:

Ullah, Aman;
Chan, Tzu-Chi;
Chang, Shinn-Liang

Publication type:

Article

Microstructural analysis of sintered iron parts joined by sinterbonding.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1737, doi. 10.1007/s00170-025-15971-4

By:

Da Costa Gonçalves, Priscila;
Deschamps, Isadora Schramm;
de Andrade Caldas, Lucas;
Mantelli, Marcia Barbosa Henriques;
Klein, Aloisio Nelmo

Publication type:

Article

Combined effect of bio-inspired surface patterning and plasma treatment on the bonding performance of 3D-printed polycarbonate.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1423, doi. 10.1007/s00170-025-15969-y

By:

Naat, Nidhal;
Hajlaoui, Khalil;
Mezlini, Salah;
da Silva, Lucas F. M.

Publication type:

Article

On the effectiveness of PBF-LB/AlSi10Mg particle dampers with thin and flat cavities considering industrial process variances.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1815, doi. 10.1007/s00170-025-15967-0

By:

Westbeld, Julius;
Dauenhauer, Daniel;
Höfer, Philipp

Publication type:

Article

Tool wear prediction through a physics-assisted method using few-sensor monitoring data.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1645, doi. 10.1007/s00170-025-15965-2

By:

Mao, Zhuang;
Luo, Ming;
Zhang, Dinghua

Publication type:

Article

Study on the prediction model of form accuracy during grinding of aspheric optical components.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 2057, doi. 10.1007/s00170-025-15964-3

By:

Pan, Ri;
Zheng, Yimin;
Hu, Chunfu;
Wang, Zhenzhong;
Gao, Peng

Publication type:

Article

Industrial intelligent connected ecosystem (IICE) oriented towards uncertainty and dynamic demand characteristics.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1525, doi. 10.1007/s00170-025-15963-4

By:

Zhang, Xianyu;
Zheng, Maokuan;
Ming, Xinguo

Publication type:

Article

Enhancing sustainability in CNC turning of POM-C polymer using MQL with vegetable-based lubricant: machine learning and metaheuristic optimization approaches.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1661, doi. 10.1007/s00170-025-15962-5

By:

Hakmi, Tallal;
Abderazek, Hammoudi;
Yapan, Yusuf Furkan;
Hamdi, Amine;
Uysal, Alper

Publication type:

Article

Additive manufacturing of low environmental impact PLA-basalt/hemp biocomposites: life cycle assessment and mechanical properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1405, doi. 10.1007/s00170-025-15961-6

By:

Cozzolino, Ersilia;
Napolitano, Francesco;
Russo, Pietro;
Astarita, Antonello;
Papa, Ilaria

Publication type:

Article

Dynamic modeling and stability prediction of dry hobbing considering the coupling of hob and workpiece.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1555, doi. 10.1007/s00170-025-15960-7

By:

Li, Benjie;
Li, Huangshuai;
Yang, Xiao;
Chen, Yongpeng;
Zhu, Yingcai

Publication type:

Article

A hybrid modeling approach for Ti-6Al-4 V turning under a high-pressure CO<sub>2</sub> cryogenic cooling jet.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1203, doi. 10.1007/s00170-025-15959-0

By:

Zhu, Libin;
Nie, Shuaishuai;
Huang, Haihong;
Xia, Jiawei;
Liu, Zhifeng

Publication type:

Article

Springback prediction using machine learning: an application for simplified automotive body-in-white structures.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1253, doi. 10.1007/s00170-025-15958-1

By:

Ramnath, Satchit;
Adrian, Alex;
Bolar, Abhishek;
Alawadhi, Ibraheem;
Sunkara, Sai;
Kumar, Prakash;
Davidson, Joseph;
Shah, Jami

Publication type:

Article

Evaluation of recycling strategies for SS316L powder in laser powder bed fusion: impacts on mechanical properties and fatigue performance.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1123, doi. 10.1007/s00170-025-15954-5

By:

Busari, Yusuf Olanrewaju;
Farounbi, Ajibike Joan;
Sikiru, Surajudeen;
Ghazali, Sarah Nadiah Mohd;
Manurung, Yupiter HP;
Moinuddin, Syed Quadir;
Shuaib-Babata, Yusuf Lanre;
Ajao, Kabir Suleiman;
Ibrahim, Mohd Halim Irwan;
Leitner, Martin

Publication type:

Article

Shewhart-type location control chart based on capability indices Cp and Cpk applied to profile monitoring.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1541, doi. 10.1007/s00170-025-15950-9

By:

Morales, Daily;
Oprime, Pedro Carlos;
Vicentin, Damaris Chieregato;
Bueno, Carlos Renato

Publication type:

Article

Microstructure and compression behavior of Ag–W metal matrix composite produced from core–shell powder by spark plasma sintering: case study.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1571, doi. 10.1007/s00170-025-15944-7

By:

Strakošová, Angelina;
Dvorský, Drahomír;
Průša, Filip;
Molnárová, Orsolya;
Habr, Stanislav;
Svoboda, Jakub;
Sedlářová, Ivona;
Vojtěch, Dalibor;
Lejček, Pavel

Publication type:

Article

Research on the deformation behavior of the stainless steel/carbon steel composite plate prepared by snake rolling.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 2037, doi. 10.1007/s00170-025-15941-w

By:

Song, Jia-Yu;
Jiang, Lian-Yun;
Qiao, Fu-Zhen;
Lv, Yan-Bing;
Huang, Zhi-Quan;
Ma, Li-Feng

Publication type:

Article

Research on micro-texture design of tools' surface by topology optimization on cutting performance.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1311, doi. 10.1007/s00170-025-15932-x

By:

Jiang, Ziwei;
Shi, Guangfeng;
Meng, Siwei;
Liu, Jiye;
Kong, Deshi

Publication type:

Article

Effect of cold expansion, burnishing and combined cold-expansion-burnishing methods on the surface integrity for aluminum alloy hole strengthening.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1239, doi. 10.1007/s00170-025-15931-y

By:

Bai, Zhaoruo;
Feng, Feng;
Zhang, Jianfu;
Feng, Pingfa;
Wang, Jianjian;
Zhang, Xiangyu

Publication type:

Article

Effect of cooling medium on clean milling mechanism and surface integrity in hard milling process.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1159, doi. 10.1007/s00170-025-15930-z

By:

Jing, Chengli;
Zheng, Guangming;
Yang, Wenfeng;
Tan, Kun;
Cheng, Xiang;
Zhang, Huaqiang

Publication type:

Article

Optimized magnetic field: strategy for enhancing applicability and efficiency of deep-hole polishing heads through magneto-fluid coupling.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1393, doi. 10.1007/s00170-025-15929-6

By:

Gao, Dawei;
Xu, Yifan;
Jiang, Chen;
Li, Yi;
Wang, Chunjin

Publication type:

Article

Springback prediction and control of TC4 titanium alloy electrically assisted stretch-bending based on electro-thermal–mechanical coupling constitutive model.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1451, doi. 10.1007/s00170-025-15926-9

By:

Qiao, Zheng;
Zhai, Ruixue;
Tian, Lujia;
Yu, Zhenhai;
Jia, Shangwu;
Meng, Qingdang

Publication type:

Article

Energy consumption model for lamellar chip formation in orthogonal micro-cutting of electroless NiP plating.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1915, doi. 10.1007/s00170-025-15923-y

By:

Xue, Jiadai;
Wang, Bo;
Chen, Wentao;
Qiao, Zheng;
Ding, Fei;
Wu, Yangong;
Liu, Yutao

Publication type:

Article

Experimental study on forming distribution of electrohydraulic forming with and without bridging wire.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1435, doi. 10.1007/s00170-025-15922-z

By:

Jang, Yoonho;
Kim, Jeong

Publication type:

Article

Minimizing the drum-shaped errors in square sawing the photovoltaic mono-crystalline silicon based on electrical discharge assisted diamond wire sawing.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 2087, doi. 10.1007/s00170-025-15917-w

By:

Qiu, Jian

Publication type:

Article

Magnetic pulse welding of large-diameter aluminum-steel dissimilar metal tubes: actuator design, welding process, and mechanism.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1343, doi. 10.1007/s00170-025-15912-1

By:

Li, Xiaoxiang;
Li, Mengxian;
Tang, Xinyu;
Liu, Haixiang;
Gong, Mengyuan;
Lai, Zhipeng;
Cao, Quanliang;
Li, Liang

Publication type:

Article

Comparative analysis of workpiece polarity effects on single-pulse discharge characteristics and crater morphology in electrical arc machining of titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1507, doi. 10.1007/s00170-025-15879-z

By:

Han, Jianqing;
Zhou, Yongqiang;
Li, Zhen;
Chen, Yimiao;
Cui, Yongfeng;
Zhang, Qinhe

Publication type:

Article

Design and chatter suppression of a CLD-structured CFRP boring bar for high-precision deep hole machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1363, doi. 10.1007/s00170-025-15909-w

By:

Liu, Gang;
Lu, Licheng;
Su, Wenlu;
Li, Junli;
An, Qinglong;
Zhang, Liqiang;
Mao, Jian

Publication type:

Article

A Digital Twin Modeling Method for the Full Lifecycle of Discrete Product.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1467, doi. 10.1007/s00170-025-15874-4

By:

Jiang, Linbei;
Su, Shaohui;
Chu, Changyong;
Chen, Chang;
Wang, Wei

Publication type:

Article

Chip deformation and machined surface quality of milling metallic glass based on average specific cutting energy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1325, doi. 10.1007/s00170-025-15899-9

By:

Du, Jinguang;
Wu, Yu;
Tian, Biao;
Ming, Wuyi;
Geng, Junxiao;
Li, Shaochuan;
He, Wenbin

Publication type:

Article

Robust laser vision sensing technology for adaptive weld seam tracking in shipbuilding automation.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 2003, doi. 10.1007/s00170-025-15896-y

By:

Baek, Daehyun;
Moon, Hyeong Soon

Publication type:

Article

Digital twin modeling method for wind turbine generator system based on operational mechanism and scenario fusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1979, doi. 10.1007/s00170-025-15892-2

By:

Fei, Xiang;
Jiang, Hong;
Zhou, Jianxing;
Zhou, Yadong

Publication type:

Article

Environmental impact assessment of welding and the parameter optimization using neural network.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1145, doi. 10.1007/s00170-025-15903-2

By:

Liu, Yun;
Huang, Haihong;
Li, Lei;
Zhang, Cheng;
Liu, Zhifeng

Publication type:

Article

The residual pile up in the ploughing and its influence on the arc-groove error in ELID groove grinding of bearing raceway.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 3, p. 1379, doi. 10.1007/s00170-025-15890-4

By:

Wu, M.L.;
Ren, C.Z.;
Zhang, K.F.

Publication type:

Article