Works in International Journal of Advanced Manufacturing Technology, 2021, Vol 113, Issue 1/2

Results: 41

Multi-phase modeling of SiC particle removal mechanism in ultrasonic vibration–assisted scratching of SiCp/Al composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 535, doi. 10.1007/s00170-021-06675-6

By:

Zheng, Wei;
Qu, Da;
Qiao, Guochao

Publication type:

Article

Comparative assessment of lubri-cooling conditions when turning CP-Ti Grade 4 based on surface roughness.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 365, doi. 10.1007/s00170-021-06672-9

By:

Telles, Fabio;
Amorim, Heraldo J.;
Souza, André J.

Publication type:

Article

Rotary ultrasonic-assisted abrasive flow finishing and its fundamental performance in Al6061 machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 473, doi. 10.1007/s00170-021-06666-7

By:

Wang, Qiuyan;
Vohra, Moiz Sabbir;
Bai, Shuowei;
Yeo, Swee Hock

Publication type:

Article

Development and characterization of AISI 316L micro parts produced by metal powder hot embossing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 407, doi. 10.1007/s00170-021-06662-x

By:

Emadinia, Omid;
Vieira, Maria Teresa;
Vieira, Manuel Fernando

Publication type:

Article

Experimental study on the cutting responses and surface integrity of side milled in situ TiB2/Al composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 321, doi. 10.1007/s00170-021-06661-y

By:

Zuo, Zhenyu;
Chen, Jie;
Yu, Weiwei;
Li, Yugang;
Chen, Dong;
Geng, Jiwei;
An, Qinglong;
Chen, Ming;
Wang, Haowei

Publication type:

Article

Study on hydrogen behaviors around micropores within heavy forging during heating process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 523, doi. 10.1007/s00170-021-06660-z

By:

Fan, Junkai;
Peng, Bo;
Zhao, Wu

Publication type:

Article

WAAM process for metal block structure parts based on mixed heat input.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 503, doi. 10.1007/s00170-021-06654-x

By:

Cui, Junyi;
Yuan, Lei;
Commins, Philip;
He, Fengyang;
Wang, Jun;
Pan, Zengxi

Publication type:

Article

Multi-objective titanium alloy belt grinding parameters optimization oriented to resources allocation and environment.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 449, doi. 10.1007/s00170-021-06644-z

By:

Liu, Ying;
Dong, Haoran;
Wang, Hongtao;
Xiao, Guijian;
Meng, Fankang

Publication type:

Article

A novel investigation into edge effect reduction of 4340 steel spur gear during induction hardening process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 605, doi. 10.1007/s00170-021-06639-w

By:

Parvinzadeh, Mahyar;
Sattarpanah Karganroudi, Sasan;
Omidi, Narges;
Barka, Noureddine;
Khalifa, Mohamed

Publication type:

Article

Modeling, simulation, and prediction of surface topography in two-dimensional ultrasonic rolling 7075 Al-alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 309, doi. 10.1007/s00170-021-06638-x

By:

Zheng, Jianxin;
Zhu, Lixin;
Guo, Yonglei;
Liu, Hongwei

Publication type:

Article

A lean approach to address material losses: materials cost deployment (MaCD).

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 565, doi. 10.1007/s00170-021-06632-3

By:

Braglia, Marcello;
Gallo, Mosè;
Marrazzini, Leonardo

Publication type:

Article

Alternative materials in moulding elements of hybrid moulds: structural integrity and tribological aspects.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 351, doi. 10.1007/s00170-021-06630-5

By:

Martinho, Pedro Gonçalves;
Pouzada, António Sérgio

Publication type:

Article

Semi-automated system for assembly of insulated corner faux bricks.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 215, doi. 10.1007/s00170-021-06629-y

By:

Whittaker, Zachary;
Jouaneh, Musa K.

Publication type:

Article

Implementation framework for PLM: a case study in the fashion industry.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 435, doi. 10.1007/s00170-021-06623-4

By:

Fani, Virginia;
Falchi, Chiara;
Bindi, Bianca;
Bandinelli, Romeo

Publication type:

Article

Thermal simulation speculation-based active coolant control onto spindle bearings.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 337, doi. 10.1007/s00170-021-06613-6

By:

Liu, Teng;
Zhou, Liang;
Gao, Weiguo;
Zhang, Yifan;
Chang, Wenfen;
Zhang, Jianjun;
Zhang, Dawei

Publication type:

Article

Real-time thermal modelling approach of a machine tool spindle based on bond graph method.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 99, doi. 10.1007/s00170-021-06611-8

By:

Yang, Yun;
Du, Zhengchun;
Feng, Xiaobing;
Yang, Jianguo

Publication type:

Article

Prediction modeling of surface roughness in milling of carbon fiber reinforced polymers (CFRP).

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 389, doi. 10.1007/s00170-021-06609-2

By:

Xiaohui, Jiang;
Shan, Gao;
Yong, Zhang;
Shirong, He;
Lei, Liu

Publication type:

Article

Comparative evaluation of supervised machine learning algorithms in the prediction of the relative density of 316L stainless steel fabricated by selective laser melting.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 419, doi. 10.1007/s00170-021-06596-4

By:

Barrionuevo, Germán Omar;
Ramos-Grez, Jorge Andrés;
Walczak, Magdalena;
Betancourt, Carlos Andrés

Publication type:

Article

Experimental and numerical prediction on square cup punch–die misalignment during the deep drawing process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 379, doi. 10.1007/s00170-021-06595-5

By:

Abdul Ghafar, Alimi;
Abdullah, Ahmad Baharuddin;
Mahmood, Johan Ihsan

Publication type:

Article

Global sensitivity analysis of riveting parameters based on a random sampling-high dimensional model representation.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 465, doi. 10.1007/s00170-021-06593-7

By:

Yin, Junqing;
Gu, Jinyu;
Chen, Yongdang;
Zhang, Feng

Publication type:

Article

Recent advances in surface defect inspection of industrial products using deep learning techniques.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 35, doi. 10.1007/s00170-021-06592-8

By:

Zheng, Xiaoqing;
Zheng, Song;
Kong, Yaguang;
Chen, Jie

Publication type:

Article

Study on kerf characteristics and surface integrity based on physical energy model during abrasive waterjet cutting of thick CFRP laminates.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 73, doi. 10.1007/s00170-021-06590-w

By:

Li, Maojun;
Lin, Xiangchen;
Yang, Xujing;
Wu, Hao;
Meng, Xianming

Publication type:

Article

Mechanism of ultra-high-speed cutting of Ti-6Al-4V alloy considering time-dependent microstructure and mechanical behaviors.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 193, doi. 10.1007/s00170-021-06589-3

By:

Chen, Guang;
Ge, Jiaying;
Lu, Lianpeng;
Liu, Jian;
Ren, Chengzu

Publication type:

Article

Water-jet guided laser drilling of thermal barrier coated aerospace alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 177, doi. 10.1007/s00170-020-06584-0

By:

Marimuthu, Sundar;
Smith, Bethan

Publication type:

Article

Inducement of residual stresses in WC-5%Co cutting inserts by plunge-face grinding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 553, doi. 10.1007/s00170-020-06583-1

By:

Cruz, Dennis Coelho;
Christoforo, André Luis;
Sordi, Vitor Luiz;
Ventura, Carlos Eiji Hirata

Publication type:

Article

Vibration suppression of aeroengine casing during milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 295, doi. 10.1007/s00170-020-06582-2

By:

Guo, Liang;
Yang, Fan;
Li, Tian;
Zhou, Ming;
Tang, Junlei

Publication type:

Article

Sensors applied to automated guided vehicle position control: a systematic literature review.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 21, doi. 10.1007/s00170-020-06577-z

By:

dos Reis, Wallace Pereira Neves;
Morandin Junior, Orides

Publication type:

Article

Effects of forming parameters on the forming limit of single-point incremental forming of sheet metal.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 483, doi. 10.1007/s00170-020-06576-0

By:

Su, Chunjian;
Lv, Shipeng;
Wang, Rui;
Lv, Yuting;
Lou, Shumei;
Wang, Qing;
Guo, Sumin

Publication type:

Article

Retraction Note: Development and application of copper–nickel zirconium diboride as EDM electrodes manufactured by selective laser sintering.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 621, doi. 10.1007/s00170-020-06547-5

By:

Czelusniak, Tiago;
Amorim, Fred L.;
Lohrengel, Armin;
Higa, Camila F.

Publication type:

Article

Mechanical clinching and self-pierce riveting for sheet combination of 780-MPa high-strength steel and aluminium alloy A5052 sheets and durability on salt spray test of joints.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 59, doi. 10.1007/s00170-020-06545-7

By:

Abe, Yohei;
Mori, Ken-ichiro

Publication type:

Article

Roll crown control capacity of sextic CVC work roll curves in plate rolling process.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 87, doi. 10.1007/s00170-020-06536-8

By:

Ding, Jingguo;
He, Yanghaochen;
Song, Mengxue;
Jiao, Zhijie;
Peng, Wen

Publication type:

Article

Study on EDM technology of distributed group electrodes in titanium alloy with large inclined angle and thin-walled group holes.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 131, doi. 10.1007/s00170-020-06522-0

By:

Yu, Ze;
Zuo, Dunwen;
Sun, Yuli;
Zhao, Jianshe;
Chen, Xuemei;
Shi, Kaibo;
Chen, Wei

Publication type:

Article

Modelling and interaction analysis of the self-pierce riveting process using regression analysis and FEA.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 159, doi. 10.1007/s00170-020-06519-9

By:

Zhao, Huan;
Han, Li;
Liu, Yunpeng;
Liu, Xianping

Publication type:

Article

Analytical modeling of cutting forces considering material softening effect in laser-assisted milling of AerMet100 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 247, doi. 10.1007/s00170-020-06518-w

By:

Zhang, Hang;
Zeng, Haohao;
Yan, Rong;
Wang, Wei;
Peng, Fangyu

Publication type:

Article

Research on magnetorheological elastomer forming process for complicated superalloy hollow part.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 231, doi. 10.1007/s00170-020-06505-1

By:

Li, Hao;
Xu, Yong;
Li, Ming;
Chen, Da-Yong;
Zhang, Shi-Hong;
Wei, Gui;
Yang, Qiu-Cheng;
Wang, Hui;
Guo, Xun-Zhong

Publication type:

Article

Tolerance optimization method based on flatness error distribution.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 279, doi. 10.1007/s00170-020-06501-5

By:

Guo, Huan;
Zhang, Zhijing;
Xiao, Muzheng;
Liu, Heng;
Zhang, Qirong

Publication type:

Article

An efficient short-time Fourier transform algorithm for grinding wheel condition monitoring through acoustic emission.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 585, doi. 10.1007/s00170-020-06476-3

By:

Lopes, Wenderson N.;
Junior, Pedro O. C.;
Aguiar, Paulo R.;
Alexandre, Felipe A.;
Dotto, Fábio R. L.;
da Silva, Paulo Sérgio;
Bianchi, Eduardo C.

Publication type:

Article

The variable radial depth of cut in finishing machining of thin-walled blade based on the stable-state deformation field.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 141, doi. 10.1007/s00170-020-06472-7

By:

Hou, Yaohua;
Zhang, Dinghua;
Zhang, Ying;
Wu, Baohai

Publication type:

Article

Exploitation of force displacement curves in blanking—feature engineering beyond defect detection.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 261, doi. 10.1007/s00170-020-06450-z

By:

Kubik, Christian;
Hohmann, Johannes;
Groche, Peter

Publication type:

Article

A review of microstructure evolution during ultrasonic additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 1, doi. 10.1007/s00170-020-06439-8

By:

Li, Dezhi

Publication type:

Article

Wear mechanism and experimental study of a tool used for micro-milling single-crystal nickel-based superalloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 1/2, p. 117, doi. 10.1007/s00170-020-06428-x

By:

Gao, Qi;
Guo, Guang-yan;
Cai, Ming

Publication type:

Article